Home/Catalog/CTRON-TIMED-RESET-MIB

CTRON-TIMED-RESET-MIB

Detailed view of the defined objects, syntax rules, and hierarchical paths.

Objects

Active

Status

Dependencies

Imported Objects

RFC-1212

CTRON-MIB-NAMES

Objects

7 total

Object Name	Syntax	OID
ctTimedResetMIB OBJECT IDENTIFIER `.1.3.6.1.4.1.52.4.1.1.5.1.3.6.1.4.1.52.4.1.1.5.2.2`	OBJECT IDENTIFIER	`.1.3.6.1.4.1.52.4.1.1.5.1.3.6.1.4.1.52.4.1.1.5.2.2`
IMPORTS Unknown `.1.3.6.1.4.1.52.4.1.1.5.1.3.6.1.4.1.52.4.1.1.5.2.2`	Unknown	`.1.3.6.1.4.1.52.4.1.1.5.1.3.6.1.4.1.52.4.1.1.5.2.2`
ctTimedResetStatussoftEnabled(1) - soft reset in ctTimedResetTimeEntered seconds. hardEnabled(2) - hard reset in ctTimedResetTimeEntered seconds. A zero value in ctTimedResetTimeEntered will cause an immediate reset. Setting this to disabled(0) will cause any currently enabled timed reset will be disabled.rwdeprecated Enumeration `.1.3.6.1.4.1.52.4.1.1.5.1.3.6.1.4.1.52.4.1.1.5.2.2.1`	Enumeration	`.1.3.6.1.4.1.52.4.1.1.5.1.3.6.1.4.1.52.4.1.1.5.2.2.1`
ctTimedResetTimeEnteredThe time, in seconds, from the time ctTimedResetStatus is set to softEnabled(1) or hardEnabled(2), until the board will reset.rwdeprecated INTEGER `.1.3.6.1.4.1.52.4.1.1.5.1.3.6.1.4.1.52.4.1.1.5.2.2.2`	INTEGER	`.1.3.6.1.4.1.52.4.1.1.5.1.3.6.1.4.1.52.4.1.1.5.2.2.2`
ctTimedResetTimeRemainingThe time, in seconds, remaining until a reset will occur. The time is not meaningful if ctTimedResetStatus is disabled(0).rodeprecated INTEGER `.1.3.6.1.4.1.52.4.1.1.5.1.3.6.1.4.1.52.4.1.1.5.2.2.3`	INTEGER	`.1.3.6.1.4.1.52.4.1.1.5.1.3.6.1.4.1.52.4.1.1.5.2.2.3`
ctTimedResetOperationalModeThe operational mode to run in when a timed reset occurs. When set to currentMode(0), the operational mode will remain unchanged. When set to ieee8021Q(1), the operational mode will be 802.1Q Switching. When set to secureFast(2), the operational mode will be Secure Fast VLAN.rwdeprecated Enumeration `.1.3.6.1.4.1.52.4.1.1.5.1.3.6.1.4.1.52.4.1.1.5.2.2.4`	Enumeration	`.1.3.6.1.4.1.52.4.1.1.5.1.3.6.1.4.1.52.4.1.1.5.2.2.4`
ctTimedResetNVRamResetdontResetNVRam(0) - NVRAM will not be cleared on timed reset. resetNVRam(1) - NVRAM will be cleared on timed reset.rwdeprecated Enumeration `.1.3.6.1.4.1.52.4.1.1.5.1.3.6.1.4.1.52.4.1.1.5.2.2.5`	Enumeration	`.1.3.6.1.4.1.52.4.1.1.5.1.3.6.1.4.1.52.4.1.1.5.2.2.5`

More MIBs from Cabletron

Browse all CabletronMIBs →

CTRON-OIDS

SNMP MIB module

1129 objects→

CTRON-SFCS-MIB

Standard SNMP MIB module defining data structures for CTRON-SFCS-MIB.

490 objects→

CABLETRON-TRAPS

Standard SNMP MIB module defining data structures for CABLETRON-TRAPS.

446 objects→

CTRON-IPX-ROUTER-MIB

SNMP MIB module

435 objects→

ADIC-SANMGR-PROXY-MIB

Standard SNMP MIB module defining data structures for ADIC-SANMGR-PROXY-MIB.

418 objects→

CTRON-AP3000-MIB

The CTRON-AP3000-MIB module enables read-write SNMP configuration management for Enterasys AP3000 wireless access points under the Enterasys enterprise OID. It provides programmatic access to device-specific operational parameters and settings required for provisioning and maintaining the AP3000 hardware.

361 objects→