CTRON-SSR-TRAP-MIB
AI MIB Summary
The CTRON-SSR-TRAP-MIB module defines SNMP trap definitions for Ctron Smart Switch Routers to asynchronously report critical hardware faults, link state transitions, and system events to a network management station.
This module describes the traps specific to the Smart Switch Router.
Main OID:
ssrTrapsMIB.1.3.6.1.4.1.52.2501.1.300
21
Objects
Active
Status
7
Dependencies
Imported Objects
Objects
21 total| Object Name |
|---|
ssrTrapsMIBThis module describes the traps specific to the Smart Switch Router. MODULE-IDENTITY .1.3.6.1.4.1.52.2501.1.300 |
ssrTrapsConformance OBJECT IDENTIFIER .1.3.6.1.4.1.52.2501.1.300.2 |
ssrTrapsCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.52.2501.1.300.2.1 |
ssrTrapsGroups OBJECT IDENTIFIER .1.3.6.1.4.1.52.2501.1.300.2.2 |
trapControl OBJECT IDENTIFIER .1.3.6.1.4.1.52.2501.10.1 |
envTrapGroup OBJECT IDENTIFIER .1.3.6.1.4.1.52.2501.10.2 |
envPowerSupplyFailedA power supply on the sending device has failed. The
sysHwPowerSupply object identifies the failed supply. NOTIFICATION-TYPE .1.3.6.1.4.1.52.2501.10.2.1 |
envPowerSupplyRecoveredA power supply on the sending device has recovered
after failure. The sysHwPowerSupply object identifies
the recovered supply. NOTIFICATION-TYPE .1.3.6.1.4.1.52.2501.10.2.2 |
envFanFailedA Fan tray on the sending device has failed. The
sysHwFan object identifies the failed fan tray. NOTIFICATION-TYPE .1.3.6.1.4.1.52.2501.10.2.3 |
envFanRecoveredA Fan tray on the sending device has recovered
after failure. The sysHwFan object identifies
the recovered Fan tray. NOTIFICATION-TYPE .1.3.6.1.4.1.52.2501.10.2.4 |
envTempExceededA temperature inside the chassis on the sending device has exceeded
normal operating temperature. The sysHwTemperature object
identifies the current status. NOTIFICATION-TYPE .1.3.6.1.4.1.52.2501.10.2.5 |
envTempNormalA temperature inside the chassis on the sending device has returned
to normal operating temperature. The sysHwTemperature
object identifies the current status. NOTIFICATION-TYPE .1.3.6.1.4.1.52.2501.10.2.6 |
envHotSwapInA module has been inserted into the chassis.
sysHwModuleSlotNumber identifies the slot the module was inserted into. NOTIFICATION-TYPE .1.3.6.1.4.1.52.2501.10.2.7 |
envHotSwapOutA module has been turned off or removed from the chassis.
sysHwModuleSlotNumber identifies the slot the module was removed from. NOTIFICATION-TYPE .1.3.6.1.4.1.52.2501.10.2.8 |
envBackupControlModuleOnlineA backup control module that was in standby mode has taken over
for a failed primary control module. Poll sysHwControlModuleBackupState
for current state of backup control module. sysHwModuleSlotNumber is the index
into the sysHwModuleTable for the now active control module. NOTIFICATION-TYPE .1.3.6.1.4.1.52.2501.10.2.9 |
envBackupControlModuleFailureA backup control module that was in standby mode has changed to
inactive or notInstalled. Poll sysHwControlModuleBackupState
for current state of backup control module. NOTIFICATION-TYPE .1.3.6.1.4.1.52.2501.10.2.10 |
envLineModuleFailureA line card module which was in the online state changed to the
offline state indicating an error condition. NOTIFICATION-TYPE .1.3.6.1.4.1.52.2501.10.2.11 |
envCPUThresholdExceededThe CPU utilization has exceeded the value of capCPUMaxThreshold
after having been below the value of capCPUMinThreshold. Once
this trap has occurred it will not occurred again until the
utilization has dropped below capCPUMinThreshold. Poll
capCPUMinThreshold and capCPUMaxThreshold to determine the
configured threshold settings. NOTIFICATION-TYPE .1.3.6.1.4.1.52.2501.10.2.12 |
polTrapGroup OBJECT IDENTIFIER .1.3.6.1.4.1.52.2501.10.3 |
polNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.52.2501.10.3.0 |
polAclDeniedThe polAclDenied trap indicates that a message was
dropped because of a 'deny' ACL. The polAclName and polAclItem
identify the entry in the polAclTable. The ifIndex value identifies
the interface on which the deny ACL was applied. NOTIFICATION-TYPE .1.3.6.1.4.1.52.2501.10.3.0.1 |