CTRON-SFPS-PORT-MIB
Detailed view of the defined objects, syntax rules, and hierarchical paths.
74
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
74 total| Object Name |
|---|
IMPORTSThis table contains the configuration information of each
configured inbound SFPS switch port. If SFPS is not
configured on a port, than an entry will not exist. SEQUENCE OF SfpsInPortConfigEntry .1.3.6.1.4.1.52.4.2.4.2.1.2.1.1 |
sfpsOutPortConfigTableThis table contains the configuration information of each
configured outbound SFPS switch port. If SFPS is not
configured on a port, than an entry will not exist. SEQUENCE OF SfpsOutPortConfigEntry .1.3.6.1.4.1.52.4.2.4.2.1.2.1.2 |
sfpsOutPortConfigEntryEach entry specifies the SFPS configuration for the SFPS
outbound switch port for which the entry exists. SfpsOutPortConfigEntry .1.3.6.1.4.1.52.4.2.4.2.1.2.1.2.1 |
sfpsOutPortConfigPortThe primary index to the SFPS in port table. This identifies
the outbound SFPS switch port for which the entry exists.ro SfpsSwitchPort .1.3.6.1.4.1.52.4.2.4.2.1.2.1.2.1.1 |
sfpsOutPortConfigAdminStatusSets the administrative state of the SFPS outbound switch port
for which the entry exists.rw Enumeration .1.3.6.1.4.1.52.4.2.4.2.1.2.1.2.1.2 |
sfpsOutPortConfigOperStatusIndicates the current operating condition of the SFPS
on the outbound switch port for which this entry exists.ro Enumeration .1.3.6.1.4.1.52.4.2.4.2.1.2.1.2.1.3 |
sfpsOutPortConfigOperTimeIndicates the elapsed time, in hundredths of a second,
that sfpsOutPortOperStatus has been in its current
operational state on the SFPS outbound switch port for which
this entry exists.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.52.4.2.4.2.1.2.1.2.1.4 |
sfpsOutPortConfigTypeSets the type of port access attribute for the outbound SFPS
port for which the entry exists. Access ports allow single
user or shared access and perform statisics and control;
network ports are equivalent to trunk ports with no access
control; host management port indicates the (virtual) port
to which the (internal) management agent is attached; host
control port indicates the port to redirect non-management
packets.rw Enumeration .1.3.6.1.4.1.52.4.2.4.2.1.2.1.2.1.5 |
sfpsOutPortConfigReservedBWSets the amount of Bandwidth that is reserved for the outbound
SFPS port for which this entry exists. This bandwidth is
set aside for this port and may be given to another port if
unused.rw INTEGER .1.3.6.1.4.1.52.4.2.4.2.1.2.1.2.1.6 |
sfpsOutPortConfigAllocBWSets the amount of Bandwidth that is allocated for
the outbound SFPS port for which this entry exists.
This bandwidth may be less than the reserved
bandwidth.ro INTEGER .1.3.6.1.4.1.52.4.2.4.2.1.2.1.2.1.7 |
sfpsOutPortConfigQoSSets the desired QoS service class for the outbound
SFPS port for which this entry exists.rw INTEGER .1.3.6.1.4.1.52.4.2.4.2.1.2.1.2.1.8 |
sfpsOutPortConfigQSizeIndicates the maximum outbound queue size for this port.
Size is indicated in packets (packet descriptors).ro INTEGER .1.3.6.1.4.1.52.4.2.4.2.1.2.1.2.1.9 |
sfpsOutPortConfigQLenIndicates the actual outbound queue size for this port.
Size is indicated in packets (packet descriptors). This
is a transient value that reflects the current depth of
queue.ro Gauge .1.3.6.1.4.1.52.4.2.4.2.1.2.1.2.1.10 |
sfpsOutPortConfigSwitchIdThis entry is id of the port.ro OCTET STRING .1.3.6.1.4.1.52.4.2.4.2.1.2.1.2.1.11 |
sfpsOutPortConfigMediaTypero Enumeration .1.3.6.1.4.1.52.4.2.4.2.1.2.1.2.1.12 |
sfpsOutPortConfigFrontPanelPortro SfpsSwitchPort .1.3.6.1.4.1.52.4.2.4.2.1.2.1.2.1.13 |
sfpsOutPortConfigLinkStatusThe link status of this port.ro Enumeration .1.3.6.1.4.1.52.4.2.4.2.1.2.1.2.1.14 |
sfpsOutPortConfigLinkStateAgeNumber of time ticks that link has been in this state.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.52.4.2.4.2.1.2.1.2.1.15 |
sfpsOutPortConfigRouterPortSpecifies whether this port is a router port.ro Enumeration .1.3.6.1.4.1.52.4.2.4.2.1.2.1.2.1.16 |
sfpsOutPortConfigSlotNumberSlot number in the chassis.ro INTEGER .1.3.6.1.4.1.52.4.2.4.2.1.2.1.2.1.17 |
sfpsOutPortConfigMib2PortIdMib2 Port idro INTEGER .1.3.6.1.4.1.52.4.2.4.2.1.2.1.2.1.18 |
sfpsPortAttributePortro INTEGER .1.3.6.1.4.1.52.4.2.4.2.1.2.1.9.1.1 |
sfpsPortAttributeAttributesro HexInteger .1.3.6.1.4.1.52.4.2.4.2.1.2.1.9.1.2 |
sfpsPortAttributeLearnSelfArpro Enumeration .1.3.6.1.4.1.52.4.2.4.2.1.2.1.9.1.3 |
sfpsPortAttributeAPIVerbrw Enumeration .1.3.6.1.4.1.52.4.2.4.2.1.2.1.9.2.1 |
sfpsPortAttributeAPIPortrw INTEGER .1.3.6.1.4.1.52.4.2.4.2.1.2.1.9.2.2 |
sfpsPortAttributeAPIAttributerw Enumeration .1.3.6.1.4.1.52.4.2.4.2.1.2.1.9.2.3 |
sfpsInPortStatsTableThis table contains the packet and byte counters for each
inbound SFPS switch port. SEQUENCE OF SfpsInPortStatsEntry .1.3.6.1.4.1.52.4.2.4.2.1.2.2.1 |
sfpsInPortStatsEntrySpecifies the SFPS packet and byte counters for the
inbound SFPS switch port for which this entry exists. SfpsInPortStatsEntry .1.3.6.1.4.1.52.4.2.4.2.1.2.2.1.1 |
sfpsInPortStatsPortThe primary index to the SFPS port table. This identifies
the SFPS inbound switch port for which the entry exists.ro SfpsSwitchPort .1.3.6.1.4.1.52.4.2.4.2.1.2.2.1.1.1 |
sfpsInPortStatsAdminStatusSets the administrative state of the SFPS packet and byte
counters on the inbound SFPS switch port for which this entry
exists.rw Enumeration .1.3.6.1.4.1.52.4.2.4.2.1.2.2.1.1.2 |
sfpsInPortStatsResetResets the SFPS packet and byte counters on the inbound SFPS
switch port for which this entry exists.rw Enumeration .1.3.6.1.4.1.52.4.2.4.2.1.2.2.1.1.3 |
sfpsInPortStatsOperTimeIndicates the amount of time (# of time ticks) that the
port-specific SFPS packet and byte counters have been
active on the inbound SFPS switch port for which this entry
exists.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.52.4.2.4.2.1.2.2.1.1.4 |
sfpsInPortStatsPktsIndicates the total number of SFPS packets that have been
received, during sfpsInPortStatsOpertime, on the inbound
SFPS switch port for which this entry exists.ro Counter .1.3.6.1.4.1.52.4.2.4.2.1.2.2.1.1.5 |
sfpsInPortStatsDiscardPktsIndicates the total number of SFPS packets that have been
discarded (dropped), during sfpsInPortStatsOpertime, on the
inbound SFPS switch port for which this entry existsro Counter .1.3.6.1.4.1.52.4.2.4.2.1.2.2.1.1.6 |
sfpsInPortStatsBytesIndicates the total number of SFPS bytes that have been
received, during sfpsInPortStatsOperTime, on the inbound
SFPS switch port for which the entry exists.ro Counter .1.3.6.1.4.1.52.4.2.4.2.1.2.2.1.1.7 |
sfpsInPortStatsDiscardBytesIndicates the total number of bytes in the SFPS packets
that have been discarded (dropped), during
sfpsInPortStatsOperTime, on the inbound SFPS switch port for
which the entry exists.ro Counter .1.3.6.1.4.1.52.4.2.4.2.1.2.2.1.1.8 |
sfpsInPortStatsQOverflowsIndicates the total number of queue overflow conditions
have been experienced for the inbound SFPS switch port
for which the entry exists.ro Counter .1.3.6.1.4.1.52.4.2.4.2.1.2.2.1.1.9 |
sfpsInPortStatsLinkUpsThe number of link ups that this port has seen.ro Counter .1.3.6.1.4.1.52.4.2.4.2.1.2.2.1.1.10 |
sfpsInPortStatsLinkDownsThe number of link downs that this port has seen.ro Counter .1.3.6.1.4.1.52.4.2.4.2.1.2.2.1.1.11 |
sfpsOutPortStatsTableThis table contains the packet and byte counters for each
outbound SFPS switch port. SEQUENCE OF SfpsOutPortStatsEntry .1.3.6.1.4.1.52.4.2.4.2.1.2.2.2 |
sfpsOutPortStatsEntrySpecifies the SFPS packet and byte counters for the
outbound SFPS switch port for which this entry exists. SfpsOutPortStatsEntry .1.3.6.1.4.1.52.4.2.4.2.1.2.2.2.1 |
sfpsOutPortStatsPortThe primary index to the SFPS port table. This identifies
the SFPS outbound switch port for which the entry exists.ro SfpsSwitchPort .1.3.6.1.4.1.52.4.2.4.2.1.2.2.2.1.1 |
sfpsOutPortStatsAdminStatusSets the administrative state of the SFPS packet and byte
counters on the outbound SFPS switch port for which this entry
exists.rw Enumeration .1.3.6.1.4.1.52.4.2.4.2.1.2.2.2.1.2 |
sfpsOutPortStatsResetResets the SFPS packet and byte counters on the outbound SFPS
switch port for which this entry exists.rw Enumeration .1.3.6.1.4.1.52.4.2.4.2.1.2.2.2.1.3 |
sfpsOutPortStatsOperTimeIndicates the amount of time (# of time ticks) that the
port-specific SFPS packet and byte counters have been
active on the outbound SFPS switch port for which this entry
exists.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.52.4.2.4.2.1.2.2.2.1.4 |
sfpsOutPortStatsPktsIndicates the total number of SFPS packets that have been
received, during sfpsOutPortStatsOpertime, on the outbound
SFPS switch port for which this entry exists.ro Counter .1.3.6.1.4.1.52.4.2.4.2.1.2.2.2.1.5 |
sfpsOutPortStatsDiscardPktsIndicates the total number of SFPS packets that have been
discarded (dropped), during sfpsOutPortStatsOpertime, on the
outbound SFPS switch port for which this entry existsro Counter .1.3.6.1.4.1.52.4.2.4.2.1.2.2.2.1.6 |
sfpsOutPortStatsBytesIndicates the total number of SFPS bytes that have been
received, during sfpsOutPortStatsOperTime, on the outbound
SFPS switch port for which the entry exists.ro Counter .1.3.6.1.4.1.52.4.2.4.2.1.2.2.2.1.7 |
sfpsOutPortStatsDiscardBytesIndicates the total number of bytes in the SFPS packets
that have been discarded (dropped), during
sfpsOutPortStatsOperTime, on the outbound SFPS switch port for
which the entry exists.ro Counter .1.3.6.1.4.1.52.4.2.4.2.1.2.2.2.1.8 |
sfpsOutPortStatsQOverflowsIndicates the total number of queue overflow conditions
have been experienced for the outbound SFPS switch port
for which the entry exists.ro Counter .1.3.6.1.4.1.52.4.2.4.2.1.2.2.2.1.9 |
sfpsOutPortStatsLinkUpsThe number of link ups that this port has seen.ro Counter .1.3.6.1.4.1.52.4.2.4.2.1.2.2.2.1.10 |
sfpsOutPortStatsLinkDownsThe number of link downs that this port has seen.ro Counter .1.3.6.1.4.1.52.4.2.4.2.1.2.2.2.1.11 |
sfpsInPortConfigEntryEach entry specifies the SFPS configuration for the SFPS
inbound switch port for which the entry exists. SfpsInPortConfigEntry .sfpsInPortConfigTable.1 |
sfpsInPortConfigPortThe primary index to the SFPS in port table. This identifies
the inbound SFPS switch port for which the entry exists.ro SfpsSwitchPort .sfpsInPortConfigTable.1.1 |
sfpsInPortConfigAdminStatusSets the administrative state of the SFPS inbound switch port
for which the entry exists.rw Enumeration .sfpsInPortConfigTable.1.2 |
sfpsInPortConfigOperStatusIndicates the current operating condition of the SFPS
on the inbound switch port for which this entry exists.ro Enumeration .sfpsInPortConfigTable.1.3 |
sfpsInPortConfigOperTimeIndicates the elapsed time, in hundredths of a second,
that sfpsInPortOperStatus has been in its current
operational state on the SFPS inbound switch port for which
this entry exists.ro TimeTicks (SNMPv2-SMI) .sfpsInPortConfigTable.1.4 |
sfpsInPortConfigTypeSets the type of port access attribute for the inbound SFPS
port for which the entry exists. Access ports allow single
user or shared access and perform statisics and control;
network ports are equivalent to trunk ports with no access
control; host management port indicates the (virtual) port
to which the (internal) management agent is attached; host
control port indicates the port to redirect non-management
packets.rw Enumeration .sfpsInPortConfigTable.1.5 |
sfpsInPortConfigReservedBWSets the amount of Bandwidth that is reserved for the inbound
SFPS port for which this entry exists. This bandwidth is
set aside for this port and may be given to another port if
unused.rw INTEGER .sfpsInPortConfigTable.1.6 |
sfpsInPortConfigAllocBWSets the amount of Bandwidth that is allocated for
the inbound SFPS port for which this entry exists.
This bandwidth may be less than the reserved
bandwidth.ro INTEGER .sfpsInPortConfigTable.1.7 |
sfpsInPortConfigQoSSets the desired QoS service class for the inbound
SFPS port for which this entry exists.rw INTEGER .sfpsInPortConfigTable.1.8 |
sfpsInPortConfigQSizeIndicates the maximum inbound queue size for this port.
Size is indicated in packets (packet descriptors).ro INTEGER .sfpsInPortConfigTable.1.9 |
sfpsInPortConfigQLenIndicates the actual inbound queue size for this port.
Size is indicated in packets (packet descriptors). This
is a transient value that reflects the current depth of
queue.ro Gauge .sfpsInPortConfigTable.1.10 |
sfpsInPortConfigSwitchIdThis entry is the id of the port.ro OCTET STRING .sfpsInPortConfigTable.1.11 |
sfpsInPortConfigMediaTypero Enumeration .sfpsInPortConfigTable.1.12 |
sfpsInPortConfigFrontPanelPortThis represents the front panel physical port numberro SfpsSwitchPort .sfpsInPortConfigTable.1.13 |
sfpsInPortConfigLinkStatusThe link status of this port.ro Enumeration .sfpsInPortConfigTable.1.14 |
sfpsInPortConfigLinkStateAgeNumber of time ticks that link has been in this state.ro TimeTicks (SNMPv2-SMI) .sfpsInPortConfigTable.1.15 |
sfpsInPortConfigRouterPortSpecifies whether this port is a router port.ro Enumeration .sfpsInPortConfigTable.1.16 |
sfpsInPortConfigSlotNumberSlot number in the chassis.ro INTEGER .sfpsInPortConfigTable.1.17 |
sfpsInPortConfigMib2PortIdMib2 Port idro INTEGER .sfpsInPortConfigTable.1.18 |
sfpsInPortConfigTopoAgentTopology Agentro DisplayString (SNMPv2-TC) .sfpsInPortConfigTable.1.19 |
sfpsInPortConfigLayer3LearningTopology Agentro Enumeration .sfpsInPortConfigTable.1.22 |