CTRON-SFPS-L4SS-MIB
Detailed view of the defined objects, syntax rules, and hierarchical paths.
126
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
126 total| Object Name |
|---|
sfpsL4SS OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.2.4.2.6 |
IMPORTS Unknown .1.3.6.1.4.1.52.4.2.4.2.6 |
sfpsL4CP OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.2.4.2.6.1 |
l4cpStats OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.2.4.2.6.1.1 |
l4cpConfig OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.2.4.2.6.1.2 |
sfpsL4CPDisableTCPAckCheckThis variable indicates whether or not TCP
segments whose ACK bit is off are allowed to use an
existing flow table entry. When set to 2, a TCP
segment whose ACK bit is off is always treated as an
exception packet. This variable takes effect immediately,
and its value is peristent.rw Enumeration .1.3.6.1.4.1.52.4.2.4.2.6.1.2.1 |
l4cpActions OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.2.4.2.6.1.3 |
sfpsL4CPFlowTableThis table describes each conversation between a pair
or Layer 3 or Layer 4 endpoints. SEQUENCE OF SfpsL4CPFlowEntry .1.3.6.1.4.1.52.4.2.4.2.6.1.4 |
sfpsL4CPFlowEntryEach entry contains statistics and information for
a pair of Layer 3 or Layer 4 endpoints. SfpsL4CPFlowEntry .1.3.6.1.4.1.52.4.2.4.2.6.1.4.1 |
sfpsL4CPFlowCnxIndexIndex (1-based) of the SFPSGAPI connection table entry
to which this flow belongs.ro INTEGER(0..'7FFFFFFF'h) .1.3.6.1.4.1.52.4.2.4.2.6.1.4.1.1 |
sfpsL4CPFlowSecL3AddressThe Layer 3 address of the secondary endpoint for this flow.
The secondary endpoint is the one having the higher MAC address.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.52.4.2.4.2.6.1.4.1.2 |
sfpsL4CPFlowPrimL3AddressThe Layer 3 address of the primary endpoint for this flow.
The primary endpoint is the one having the lower MAC address.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.52.4.2.4.2.6.1.4.1.3 |
sfpsL4CPFlowSubprotocolThis value identifies the Layer 4 protocol. It
corresponds to the IP 'Protocol' field as described
in the 'Assigned Numbers' RFC.ro HexInteger(0..'7FFFFFFF'h) .1.3.6.1.4.1.52.4.2.4.2.6.1.4.1.4 |
sfpsL4CPFlowSecMatchAnyDynIf this is a TCP or UDP entry, this value specifies whether
or not the protocol port of the secondary endpoint should
be treated as a wildcard, able to match any port number above
1023.ro Enumeration .1.3.6.1.4.1.52.4.2.4.2.6.1.4.1.5 |
sfpsL4CPFlowPrimMatchAnyDynIf this is a TCP or UDP entry, this value specifies whether
or not the protocol port of the primary endpoint should
be treated as a wildcard, able to match any port number above
1023.ro Enumeration .1.3.6.1.4.1.52.4.2.4.2.6.1.4.1.6 |
sfpsL4CPFlowSecProtPortIf this is a TCP or UDP entry, this value indicates the
protocol port number of the secondary endpoint.
Otherwise, this field is zero.ro INTEGER(0..'FFFF'h) .1.3.6.1.4.1.52.4.2.4.2.6.1.4.1.7 |
sfpsL4CPFlowPrimProtPortIf this is a TCP or UDP entry, this value indicates the
protocol port number of the primary endpoint.
Otherwise, this field is zero.ro INTEGER(0..'FFFF'h) .1.3.6.1.4.1.52.4.2.4.2.6.1.4.1.8 |
sfpsL4CPFlowSecSubstAppliesIndication of whether or not MAC address substitution
applies to the secondary endpoint for this flow.ro Enumeration .1.3.6.1.4.1.52.4.2.4.2.6.1.4.1.9 |
sfpsL4CPFlowPrimSubstAppliesIndication of whether or not MAC address substitution
applies to the primary endpoint for this flow.ro Enumeration .1.3.6.1.4.1.52.4.2.4.2.6.1.4.1.10 |
sfpsL4CPFlowSecInPktsCount of packets transmitted from primary to secondary.ro Counter .1.3.6.1.4.1.52.4.2.4.2.6.1.4.1.11 |
sfpsL4CPFlowSecInOctetsCount of octets transmitted from primary to secondary.ro Counter .1.3.6.1.4.1.52.4.2.4.2.6.1.4.1.12 |
sfpsL4CPFlowPrimInPktsCount of packets transmitted from secondary to primary.ro Counter .1.3.6.1.4.1.52.4.2.4.2.6.1.4.1.13 |
sfpsL4CPFlowPrimInOctetsCount of octets transmitted from secondary to primary.ro Counter .1.3.6.1.4.1.52.4.2.4.2.6.1.4.1.14 |
sfpsL4CPFlowFlowAgeTime elapsed since this entry was created.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.52.4.2.4.2.6.1.4.1.15 |
sfpsL4CPFlowFlowLastUseTime elapsed since this entry was last used to send data.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.52.4.2.4.2.6.1.4.1.16 |
sfpsL4CPFlowIDThe Call Detail Recording flow ID for this flow, or zero
if CDR is not active for the flow.ro INTEGER .1.3.6.1.4.1.52.4.2.4.2.6.1.4.1.17 |
sfpsL4CPMACAddrSubTableThis table provides the ability to override the default
gateway for specific routes. SEQUENCE OF SfpsL4CPMACAddrSubEntry .1.3.6.1.4.1.52.4.2.4.2.6.1.5 |
sfpsL4CPMACAddrSubEntryEach entry contains the MAC address substitution information
associated with a specific destination IP address. SfpsL4CPMACAddrSubEntry .1.3.6.1.4.1.52.4.2.4.2.6.1.5.1 |
sfpsL4CPMACAddrSubDestIPDestination IP address for this routero IpAddress .1.3.6.1.4.1.52.4.2.4.2.6.1.5.1.1 |
sfpsL4CPMACAddrSubNextHopMACThe next-hop MAC address to use for this route.ro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.52.4.2.4.2.6.1.5.1.2 |
sfpsL4CPMACAddrSubRefCountThe number of flow table entries that reference this entry.ro INTEGER(0..'7FFFFFFF'h) .1.3.6.1.4.1.52.4.2.4.2.6.1.5.1.3 |
sfpsL4CPNetAddrUserTableThis table associates user information with network
addresses. SEQUENCE OF SfpsL4CPNetAddrUserEntry .1.3.6.1.4.1.52.4.2.4.2.6.1.7 |
sfpsL4CPNetAddrUserEntryEach entry contains the user information
associated with a specific network address. SfpsL4CPNetAddrUserEntry .1.3.6.1.4.1.52.4.2.4.2.6.1.7.1 |
sfpsL4CPNetAddrUserProtocolThe network-layer protocol associated with this entry. Values
correspond to the 'aoAddressTag' enumeration
(see aoproperties.h).ro INTEGER(0..'7FFFFFFF'h) .1.3.6.1.4.1.52.4.2.4.2.6.1.7.1.1 |
sfpsL4CPNetAddrUserNetAddrThe network-layer address associated with this entry.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.52.4.2.4.2.6.1.7.1.2 |
sfpsL4CPNetAddrUserLoginIDThe login ID from CSM's LoginOID. Set to zero
if no user is logged into the address.ro INTEGER .1.3.6.1.4.1.52.4.2.4.2.6.1.7.1.3 |
sfpsL4CPNetAddrUserUserIDThe object ID from CSM's UserOID.ro INTEGER .1.3.6.1.4.1.52.4.2.4.2.6.1.7.1.4 |
sfpsL4CPNetAddrUserUserNameThe user name associated with this entry.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.52.4.2.4.2.6.1.7.1.5 |
sfpsL4CPIPRouteTableThis table associates IP routes (subnets) with devices. SEQUENCE OF SfpsL4CPIPRouteEntry .1.3.6.1.4.1.52.4.2.4.2.6.1.8 |
sfpsL4CPIPRouteEntryEach entry contains the IP route information
associated with a specific device. SfpsL4CPIPRouteEntry .1.3.6.1.4.1.52.4.2.4.2.6.1.8.1 |
sfpsL4CPIPRouteSubnetMaskThe subnet mask associated with this route.ro IpAddress .1.3.6.1.4.1.52.4.2.4.2.6.1.8.1.1 |
sfpsL4CPIPRouteSubnetThe destination subnet of this route.ro IpAddress .1.3.6.1.4.1.52.4.2.4.2.6.1.8.1.2 |
sfpsL4CPIPRouteRouteIDThe object ID from CSM's RouteOID.ro INTEGER .1.3.6.1.4.1.52.4.2.4.2.6.1.8.1.3 |
sfpsL4CPIPRouteRouteSubsystemIndicates type of device route.ro Enumeration .1.3.6.1.4.1.52.4.2.4.2.6.1.8.1.4 |
sfpsL4CPIPRouteDeviceIDThe object ID from CSM's DeviceOID.ro INTEGER .1.3.6.1.4.1.52.4.2.4.2.6.1.8.1.5 |
sfpsL4CPIPRouteDeviceNameThe device name for this route.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.52.4.2.4.2.6.1.8.1.6 |
sfpsL4CPIPRouteMACAddressThe MAC address of the device for this route.ro SfpsAddress .1.3.6.1.4.1.52.4.2.4.2.6.1.8.1.7 |
sfpsL4CPIPRouteMetricThe metric associated with this route.ro INTEGER .1.3.6.1.4.1.52.4.2.4.2.6.1.8.1.8 |
sfpsL4CPIPRouteCallableIndicates whether or not the device associated
with this route is callable for IP.ro Enumeration .1.3.6.1.4.1.52.4.2.4.2.6.1.8.1.9 |
sfpsL4CPPortTableThis table lists the attributes of an access servers ports. SEQUENCE OF SfpsL4CPPortEntry .1.3.6.1.4.1.52.4.2.4.2.6.1.9 |
sfpsL4CPPortEntryEach entry contains information about
one of this access server's ports. SfpsL4CPPortEntry .1.3.6.1.4.1.52.4.2.4.2.6.1.9.1 |
sfpsL4CPPortNumThe logical port number of this port.ro INTEGER(0..'7FFFFFFF'h) .1.3.6.1.4.1.52.4.2.4.2.6.1.9.1.1 |
sfpsL4CPPortIDThe last four octets of CSM's PortOID for this port.ro INTEGER .1.3.6.1.4.1.52.4.2.4.2.6.1.9.1.2 |
sfpsL4CPPortApplyPolicyInIndicates whether or not access policies
are to be applied to packets arriving at this port.ro Enumeration .1.3.6.1.4.1.52.4.2.4.2.6.1.9.1.3 |
sfpsL4CPPortApplyPolicyOutIndicates whether or not access policies
are to be applied to packets sent out this port.ro Enumeration .1.3.6.1.4.1.52.4.2.4.2.6.1.9.1.4 |
sfpsL4CPPortDefaultUserIDThe last four octets of CSM's UserOID for the
default userid for this port.ro INTEGER .1.3.6.1.4.1.52.4.2.4.2.6.1.9.1.5 |
sfpsL4CPPortDefaultUserNameThe user name assigned to MAC addresses
discovered on this port.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.52.4.2.4.2.6.1.9.1.6 |
sfpsL4CPCallableDeviceTableThis table lists the attributes of a callable device. SEQUENCE OF SfpsL4CPCallableDeviceEntry .1.3.6.1.4.1.52.4.2.4.2.6.1.11 |
sfpsL4CPCallableDeviceEntryEach entry contains information about
one of this access server's ports. SfpsL4CPCallableDeviceEntry .1.3.6.1.4.1.52.4.2.4.2.6.1.11.1 |
sfpsL4CPCallableDeviceDeviceIDThe last four octets of CSM's DeviceOID for this
callable device.ro INTEGER(0..'7FFFFFFF'h) .1.3.6.1.4.1.52.4.2.4.2.6.1.11.1.1 |
sfpsL4CPCallableDeviceDeviceNameThe default device name for this callable device.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.52.4.2.4.2.6.1.11.1.2 |
sfpsL4CPCallableDeviceDefaultUserNameThe default user name for this callable device.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.52.4.2.4.2.6.1.11.1.3 |
sfpsL4CDR OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.2.4.2.6.2 |
l4cdrStats OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.2.4.2.6.2.1 |
l4cdrConfig OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.2.4.2.6.2.2 |
l4cdrActions OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.2.4.2.6.2.3 |
sfpsL4CDRActiveFlowTableThis table lists the currently active flows that have
Call Detail Recording enabled. SEQUENCE OF SfpsL4CDRActiveFlowEntry .1.3.6.1.4.1.52.4.2.4.2.6.2.4 |
sfpsL4CDRActiveFlowEntryEach entry contains information about
one flow that has CDR enabled. SfpsL4CDRActiveFlowEntry .1.3.6.1.4.1.52.4.2.4.2.6.2.4.1 |
sfpsL4CDRActiveFlowFlowIDFlow ID for this flow.ro INTEGER(0..'7FFFFFFF'h) .1.3.6.1.4.1.52.4.2.4.2.6.2.4.1.1 |
sfpsL4CDRActiveFlowSubProtocolIf this is a Layer 4 flow, this value identifies the Layer
4 protocol (for IP, this value corresponds to the 'Protocol'
field as described in the 'Assigned Numbers' RFC). If this
is a Layer 3 flow, this value is zero.ro INTEGER .1.3.6.1.4.1.52.4.2.4.2.6.2.4.1.2 |
sfpsL4CDRActiveFlowEtherTypeThe Layer 3 protocol represented by this entry. Values
correspond to the 'Ether Type' field as described in the
Assigned Numbers RFC.ro INTEGER .1.3.6.1.4.1.52.4.2.4.2.6.2.4.1.3 |
sfpsL4CDRActiveFlowSourceUserThe user name associated with the source of the flow.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.52.4.2.4.2.6.2.4.1.4 |
sfpsL4CDRActiveFlowSourceMACAddrThe MAC address associated with the source of the flow.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.52.4.2.4.2.6.2.4.1.5 |
sfpsL4CDRActiveFlowSourceNetAddrThe Layer 3 address associated with the source of the flow.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.52.4.2.4.2.6.2.4.1.6 |
sfpsL4CDRActiveFlowSourceProtocolPortIf this is a Layer 4 flow, this value indicates the
protocol port number of the source of the flow.
Otherwise, this field is zero.ro INTEGER .1.3.6.1.4.1.52.4.2.4.2.6.2.4.1.7 |
sfpsL4CDRActiveFlowSourcePPRangeEnabledIndicates whether or not any source protocol port
number greater than 1023 is considered to match the source
protocol port with which this flow was created.ro Enumeration .1.3.6.1.4.1.52.4.2.4.2.6.2.4.1.8 |
sfpsL4CDRActiveFlowSourceConnNumberThe source connection number.ro INTEGER .1.3.6.1.4.1.52.4.2.4.2.6.2.4.1.9 |
sfpsL4CDRActiveFlowDestUserThe user name associated with the destination of the flow.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.52.4.2.4.2.6.2.4.1.10 |
sfpsL4CDRActiveFlowDestMACAddrThe MAC address associated with the destination of the flow.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.52.4.2.4.2.6.2.4.1.11 |
sfpsL4CDRActiveFlowDestNetAddrThe Layer 3 address associated with the destination of the flow.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.52.4.2.4.2.6.2.4.1.12 |
sfpsL4CDRActiveFlowDestProtocolPortIf this is a Layer 4 flow, this value indicates the
protocol port number of the destination of the flow.
Otherwise, this field is zero.ro INTEGER .1.3.6.1.4.1.52.4.2.4.2.6.2.4.1.13 |
sfpsL4CDRActiveFlowDestPPRangeEnabledIndicates whether or not any destination protocol port
number greater than 1023 is considered to match the destination
protocol port with which this flow was created.ro Enumeration .1.3.6.1.4.1.52.4.2.4.2.6.2.4.1.14 |
sfpsL4CDRActiveFlowDestConnNumberThe destination connection number.ro INTEGER .1.3.6.1.4.1.52.4.2.4.2.6.2.4.1.15 |
sfpsL4CDRActiveFlowStartTimeThe time elapsed since this flow was created.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.52.4.2.4.2.6.2.4.1.16 |
sfpsL4CDRActiveFlowLastPktTimeThe time elapsed since the most recent packet was sent on
this flow.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.52.4.2.4.2.6.2.4.1.17 |
sfpsL4CDRActiveFlowEndTimeThe time elapsed since this flow was terminated. This
field is not meaningful for active flows.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.52.4.2.4.2.6.2.4.1.18 |
sfpsL4CDRActiveFlowInOctetsThe number of octets that have been sent from the
destination to the source.ro Counter .1.3.6.1.4.1.52.4.2.4.2.6.2.4.1.19 |
sfpsL4CDRActiveFlowOutOctetsThe number of octets that have been sent from the
source to the destination.ro Counter .1.3.6.1.4.1.52.4.2.4.2.6.2.4.1.20 |
sfpsL4CDRActiveFlowInPktsThe number of packets that have been sent from the
destination to the source.ro Counter .1.3.6.1.4.1.52.4.2.4.2.6.2.4.1.21 |
sfpsL4CDRActiveFlowOutPktsThe number of packets that have been sent from the
source to the destination.ro Counter .1.3.6.1.4.1.52.4.2.4.2.6.2.4.1.22 |
sfpsL4CDRActiveFlowDemandAccessConnMadeIndicates whether or not a demand access
connection had to be made for this flow.ro Enumeration .1.3.6.1.4.1.52.4.2.4.2.6.2.4.1.23 |
sfpsL4CDRActiveFlowFlowRecordStateIndicates the current state of the flow record.ro Enumeration .1.3.6.1.4.1.52.4.2.4.2.6.2.4.1.24 |
sfpsL4CDRTermedFlowTableThis table lists the terminated flows that had
Call Detail Recording enabled. SEQUENCE OF SfpsL4CDRTermedFlowEntry .1.3.6.1.4.1.52.4.2.4.2.6.2.5 |
sfpsL4CDRTermedFlowEntryEach entry contains information about
one flow that had CDR enabled. SfpsL4CDRTermedFlowEntry .1.3.6.1.4.1.52.4.2.4.2.6.2.5.1 |
sfpsL4CDRTermedFlowFlowIDFlow ID for this flow.ro INTEGER(0..'7FFFFFFF'h) .1.3.6.1.4.1.52.4.2.4.2.6.2.5.1.1 |
sfpsL4CDRTermedFlowSubProtocolIf this is a Layer 4 flow, this value identifies the Layer
4 protocol (for IP, this value corresponds to the 'Protocol'
field as described in the 'Assigned Numbers' RFC). If this
is a Layer 3 flow, this value is zero.ro INTEGER .1.3.6.1.4.1.52.4.2.4.2.6.2.5.1.2 |
sfpsL4CDRTermedFlowEtherTypeThe Layer 3 protocol represented by this entry. Values
correspond to the 'Ether Type' field as described in the
Assigned Numbers RFC.ro INTEGER .1.3.6.1.4.1.52.4.2.4.2.6.2.5.1.3 |
sfpsL4CDRTermedFlowSourceUserThe user name associated with the source of the flow.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.52.4.2.4.2.6.2.5.1.4 |
sfpsL4CDRTermedFlowSourceMACAddrThe MAC address associated with the source of the flow.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.52.4.2.4.2.6.2.5.1.5 |
sfpsL4CDRTermedFlowSourceNetAddrThe Layer 3 address associated with the source of the flow.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.52.4.2.4.2.6.2.5.1.6 |
sfpsL4CDRTermedFlowSourceProtocolPortIf this is a Layer 4 flow, this value indicates the
protocol port number of the source of the flow.
Otherwise, this field is zero.ro INTEGER .1.3.6.1.4.1.52.4.2.4.2.6.2.5.1.7 |
sfpsL4CDRTermedFlowSourcePPRangeEnabledIndicates whether or not any source protocol port
number greater than 1023 is considered to match the source
protocol port with which this flow was created.ro Enumeration .1.3.6.1.4.1.52.4.2.4.2.6.2.5.1.8 |
sfpsL4CDRTermedFlowSourceConnNumberThe source connection number.ro INTEGER .1.3.6.1.4.1.52.4.2.4.2.6.2.5.1.9 |
sfpsL4CDRTermedFlowDestUserThe user name associated with the destination of the flow.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.52.4.2.4.2.6.2.5.1.10 |
sfpsL4CDRTermedFlowDestMACAddrThe MAC address associated with the destination of the flow.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.52.4.2.4.2.6.2.5.1.11 |
sfpsL4CDRTermedFlowDestNetAddrThe Layer 3 address associated with the destination of the flow.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.52.4.2.4.2.6.2.5.1.12 |
sfpsL4CDRTermedFlowDestProtocolPortIf this is a Layer 4 flow, this value indicates the
protocol port number of the destination of the flow.
Otherwise, this field is zero.ro INTEGER .1.3.6.1.4.1.52.4.2.4.2.6.2.5.1.13 |
sfpsL4CDRTermedFlowDestPPRangeEnabledIndicates whether or not any destination protocol port
number greater than 1023 is considered to match the destination
protocol port with which this flow was created.ro Enumeration .1.3.6.1.4.1.52.4.2.4.2.6.2.5.1.14 |
sfpsL4CDRTermedFlowDestConnNumberThe destination connection number.ro INTEGER .1.3.6.1.4.1.52.4.2.4.2.6.2.5.1.15 |
sfpsL4CDRTermedFlowStartTimeThe time elapsed since this flow was created.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.52.4.2.4.2.6.2.5.1.16 |
sfpsL4CDRTermedFlowLastPktTimeThe time elapsed since the most recent packet was sent on
this flow.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.52.4.2.4.2.6.2.5.1.17 |
sfpsL4CDRTermedFlowEndTimeThe time elapsed since this flow was terminated.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.52.4.2.4.2.6.2.5.1.18 |
sfpsL4CDRTermedFlowInOctetsThe number of octets that have been sent from the
destination to the source.ro Counter .1.3.6.1.4.1.52.4.2.4.2.6.2.5.1.19 |
sfpsL4CDRTermedFlowOutOctetsThe number of octets that have been sent from the
source to the destination.ro Counter .1.3.6.1.4.1.52.4.2.4.2.6.2.5.1.20 |
sfpsL4CDRTermedFlowInPktsThe number of packets that have been sent from the
destination to the source.ro Counter .1.3.6.1.4.1.52.4.2.4.2.6.2.5.1.21 |
sfpsL4CDRTermedFlowOutPktsThe number of packets that have been sent from the
source to the destination.ro Counter .1.3.6.1.4.1.52.4.2.4.2.6.2.5.1.22 |
sfpsL4CDRTermedFlowDemandAccessConnMadeIndicates whether or not a demand access
connection had to be made for this flow.ro Enumeration .1.3.6.1.4.1.52.4.2.4.2.6.2.5.1.23 |
sfpsL4CDRTermedFlowFlowRecordStateIndicates the current state of the flow record.ro Enumeration .1.3.6.1.4.1.52.4.2.4.2.6.2.5.1.24 |
sfpsL4CDRFlowIndexTableThis table lists the current flows that have
Call Detail Recording enabled. SEQUENCE OF SfpsL4CDRFlowIndexEntry .1.3.6.1.4.1.52.4.2.4.2.6.2.6 |
sfpsL4CDRFlowIndexEntryEach entry contains information about
one flow that has CDR enabled. SfpsL4CDRFlowIndexEntry .1.3.6.1.4.1.52.4.2.4.2.6.2.6.1 |
sfpsL4CDRFlowIndexFlowIDFlow ID for this flow.ro INTEGER(0..'7FFFFFFF'h) .1.3.6.1.4.1.52.4.2.4.2.6.2.6.1.1 |
sfpsL4CDRFlowIndexSFPSFlowTblIndexIndex of the SFPS Flow Table entry (1-based) that
corresponds to this flow.ro INTEGER .1.3.6.1.4.1.52.4.2.4.2.6.2.6.1.2 |
sfpsL4CDRFlowIndexSFlowStatsPtrPointer to the SFlowStats object for this flow.ro INTEGER .1.3.6.1.4.1.52.4.2.4.2.6.2.6.1.3 |
sfpsL4CDRFlowIndexStaticFlowInfoPtrPointer to the L4CDRStaticFlowInfo object for this flow.ro INTEGER .1.3.6.1.4.1.52.4.2.4.2.6.2.6.1.4 |
sfpsL4CDRFlowIndexFlowTblEntryPtrThe flow table entry pointer for this flow.ro INTEGER .1.3.6.1.4.1.52.4.2.4.2.6.2.6.1.5 |
sfpsL4CDRFlowIndexFlowStateIndicates the current state of the flow index record.ro Enumeration .1.3.6.1.4.1.52.4.2.4.2.6.2.6.1.6 |