CTRON-SFPS-CONNECTION-MIB
Detailed view of the defined objects, syntax rules, and hierarchical paths.
107
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
107 total| Object Name |
|---|
sfpsConnectionEntryEach entry specifies the connection information for the
active connection for which the entry exists. SfpsConnectionEntry .1 |
sfpsConnectionDestinationThe destination SFPS address for this source/destination
connection.ro SfpsAddress .1.1 |
sfpsConnectionSourceThe source SFPS address for this source/destination
connection.ro SfpsAddress .1.2 |
sfpsConnectionPrimInPortIdentifies the primary inbound SFPS switch port.ro INTEGER .1.3 |
IMPORTSThis table contains the connection information for all
active connections on the SFPS access ports. SEQUENCE OF SfpsConnectionEntry .1.3.6.1.4.1.52.4.2.4.2.1.3.1 |
sfpsConnectionLookupAPIVerbSpecifies the action to be initiated as a result of setting
this leaf.rw Enumeration .1.3.6.1.4.1.52.4.2.4.2.1.3.2.1 |
sfpsConnectionLookupAPIMacAddrMAC address to be looked up as either the Source or Destination addresses.rw SfpsAddress .1.3.6.1.4.1.52.4.2.4.2.1.3.2.2 |
sfpsConnectionLookupAPIDestAddrDestination MAC addressro SfpsAddress .1.3.6.1.4.1.52.4.2.4.2.1.3.2.3 |
sfpsConnectionLookupAPISourceAddrSource MAC addressro SfpsAddress .1.3.6.1.4.1.52.4.2.4.2.1.3.2.4 |
sfpsConnectionLookupAPIPrimInPortSource port numberro INTEGER .1.3.6.1.4.1.52.4.2.4.2.1.3.2.5 |
sfpsConnectionLookupAPIPrimOutPortDestination port number. If -1, denotes multiple out ports.ro INTEGER .1.3.6.1.4.1.52.4.2.4.2.1.3.2.6 |
sfpsConnectionLookupAPISecInPortSource port numberro INTEGER .1.3.6.1.4.1.52.4.2.4.2.1.3.2.7 |
sfpsConnectionLookupAPISecOutPortDestination port number. If 01, denotes multiple out portsro INTEGER .1.3.6.1.4.1.52.4.2.4.2.1.3.2.8 |
sfpsConnectionLookupAPICtrlStatusControl statusro Enumeration .1.3.6.1.4.1.52.4.2.4.2.1.3.2.9 |
sfpsConnectionLookupAPIAdminStatusAdministrative statusro Enumeration .1.3.6.1.4.1.52.4.2.4.2.1.3.2.10 |
sfpsConnectionLookupAPIAgeAge of connectionro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.52.4.2.4.2.1.3.2.11 |
sfpsConnectionLookupAPITypeType of connectionro Enumeration .1.3.6.1.4.1.52.4.2.4.2.1.3.2.12 |
sfpsConnectionLookupAPIPktsNumber of packets switched on this connectionro INTEGER .1.3.6.1.4.1.52.4.2.4.2.1.3.2.13 |
sfpsConnectionLookupAPIBytesNumber of bytes switched on this connectionro INTEGER .1.3.6.1.4.1.52.4.2.4.2.1.3.2.14 |
sfpsConnectionLookupAPICanAgeBoolean to determine if this connection will be aged. True (1) means to age.ro INTEGER .1.3.6.1.4.1.52.4.2.4.2.1.3.2.15 |
sfpsConnectionLookupAPIPrimOutPortsIf Primary OutPort is -1, the multiple outports will be displayed in text formatro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.52.4.2.4.2.1.3.2.16 |
sfpsConnectionLookupAPISecOutPortsIf Secondary OutPort is -1, the multiple outports will be displayed in text formatro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.52.4.2.4.2.1.3.2.17 |
sfpsConnectionConfigAPIVerbSpecifies the verb.rw Enumeration .1.3.6.1.4.1.52.4.2.4.2.1.3.3.1 |
sfpsConnectionConfigAPICnxHiMarkSpecifies the percentage of the Connection Table needed
to be full before beginning aging.rw INTEGER .1.3.6.1.4.1.52.4.2.4.2.1.3.3.2 |
sfpsConnectionConfigAPICnxNumToAgeSpecifies the number of connections to age at each pass.rw INTEGER .1.3.6.1.4.1.52.4.2.4.2.1.3.3.3 |
sfpsConnectionConfigAPIAgePeriodSpecifies the age period. Units in minutes. 0 - No periodic aging
N - age every N minutesrw INTEGER .1.3.6.1.4.1.52.4.2.4.2.1.3.3.4 |
sfpsConnectionConfigAPIAgePassInProgressSpecifies whether the age pass is in progress. 0 - not aging now
1 - aging now.ro INTEGER .1.3.6.1.4.1.52.4.2.4.2.1.3.3.5 |
sfpsConnectionConfigAPICurCapacitySpecifies the percentage of the Connection Table used.ro INTEGER .1.3.6.1.4.1.52.4.2.4.2.1.3.3.6 |
sfpsConnectionConfigAPILastPassTimeSpecifies the time that the last age pass occured.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.52.4.2.4.2.1.3.3.7 |
sfpsConnectionConfigAPITimeSinceLastPassSpecifies the time since the last age pass.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.52.4.2.4.2.1.3.3.8 |
sfpsConnectionConfigAPIAgePassDeltaSpecifies the time between the last two age passes.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.52.4.2.4.2.1.3.3.9 |
sfpsConnectionConfigAPIAgePassCountSpecifies the number of aging passes that have occured.ro INTEGER .1.3.6.1.4.1.52.4.2.4.2.1.3.3.10 |
sfpsConnectionConfigAPIAgeStatsHiMarkrw INTEGER .1.3.6.1.4.1.52.4.2.4.2.1.3.3.11 |
sfpsConnectionConfigAPIStatsAgingEnablerw INTEGER .1.3.6.1.4.1.52.4.2.4.2.1.3.3.12 |
sfpsConnectionConfigAPIAgeStatsAgingSupportedro INTEGER .1.3.6.1.4.1.52.4.2.4.2.1.3.3.13 |
sfpsConnectionConfigAPIIdleCnxsro INTEGER .1.3.6.1.4.1.52.4.2.4.2.1.3.3.14 |
sfpsConnectionConfigAPIActiveCnxsro INTEGER .1.3.6.1.4.1.52.4.2.4.2.1.3.3.15 |
sfpsConnectionStatsMaxCnxsThe maximum number of bi-directional connections allocated
for the switch.ro INTEGER .1.3.6.1.4.1.52.4.2.4.2.1.3.4.1 |
sfpsConnectionStatsTotalCnxsThe total number of bi-directional connections used in
the switch.ro INTEGER .1.3.6.1.4.1.52.4.2.4.2.1.3.4.2 |
sfpsConnectionStatsSwitchedCnxsThe number of bi-directional connections used in the switch
with type <switched>ro INTEGER .1.3.6.1.4.1.52.4.2.4.2.1.3.4.3 |
sfpsConnectionStatsVlanCnxsThe number of bi-directional connections used in the switch
with type <VLAN>ro INTEGER .1.3.6.1.4.1.52.4.2.4.2.1.3.4.4 |
sfpsConnectionStatsFilterCnxsThe number of bi-directional connections used in the switch
with type <Filter>ro INTEGER .1.3.6.1.4.1.52.4.2.4.2.1.3.4.5 |
sfpsConnectionStatsSelfProgCnxsThe number of bi-directional connections used in the switch
with type <self Programmed Connections>ro INTEGER .1.3.6.1.4.1.52.4.2.4.2.1.3.4.6 |
sfpsConnectionStatsProvsnedCnxsThe number of bi-directional connections used in the switch
with type <provisioned>ro INTEGER .1.3.6.1.4.1.52.4.2.4.2.1.3.4.7 |
sfpsConnectionStatsTapCnxsThe number of bi-directional connections used in the switch
with type <tap>ro INTEGER .1.3.6.1.4.1.52.4.2.4.2.1.3.4.8 |
sfpsConnectionStatsMcastCnxsThe number of bi-directional connections used in the switch
with type <multicast>ro INTEGER .1.3.6.1.4.1.52.4.2.4.2.1.3.4.9 |
sfpsConnectionStatsNetPortFilterCnxsThe number of bi-directional connections used in the switch
with type <network port filter connections>ro INTEGER .1.3.6.1.4.1.52.4.2.4.2.1.3.4.10 |
sfpsConnectionStatsNonCriticalVlansNumber of non-critical connections - these will be aged firstro INTEGER .1.3.6.1.4.1.52.4.2.4.2.1.3.4.11 |
sfpsConnectionStatsAddErrorsNumber of errors on adding a connnectionro INTEGER .1.3.6.1.4.1.52.4.2.4.2.1.3.4.12 |
sfpsConnectionStatsDeleteErrorsNumber of errors on deleting a connectionro INTEGER .1.3.6.1.4.1.52.4.2.4.2.1.3.4.13 |
sfpsConnectionQueryAPIVerbSpecifies the action to be initiated as a result of setting
this leaf.rw Enumeration .1.3.6.1.4.1.52.4.2.4.2.1.3.5.1 |
sfpsConnectionQueryAPIDestAddrDestination MAC address.rw SfpsAddress .1.3.6.1.4.1.52.4.2.4.2.1.3.5.2 |
sfpsConnectionQueryAPISourceAddrSource MAC address.rw SfpsAddress .1.3.6.1.4.1.52.4.2.4.2.1.3.5.3 |
sfpsConnectionQueryAPIInPortSource port number.rw INTEGER .1.3.6.1.4.1.52.4.2.4.2.1.3.5.4 |
sfpsConnectionQueryAPIOutPortDestination port number.rw INTEGER .1.3.6.1.4.1.52.4.2.4.2.1.3.5.5 |
sfpsConnectionQueryAPICtrlStatusControl Statusro Enumeration .1.3.6.1.4.1.52.4.2.4.2.1.3.5.6 |
sfpsConnectionQueryAPIAdminStatusAdministrative Status.ro Enumeration .1.3.6.1.4.1.52.4.2.4.2.1.3.5.7 |
sfpsConnectionQueryAPIAgeAge of connection.ro INTEGER .1.3.6.1.4.1.52.4.2.4.2.1.3.5.8 |
sfpsConnectionQueryAPIQueryTypeType of connection.rw Enumeration .1.3.6.1.4.1.52.4.2.4.2.1.3.5.9 |
sfpsConnectionQueryAPIOwnerSpecifies whether or not Call control is owned by this agent
switch. If the call is owned, then the switch
will be responsible for releasing the call. This is
used mainly when transferring call ownership in call
re-routing and in setting up originating calls.ro INTEGER .1.3.6.1.4.1.52.4.2.4.2.1.3.5.10 |
sfpsConnectionQueryAPIPktsNumber of packets switched on this connection.ro Counter .1.3.6.1.4.1.52.4.2.4.2.1.3.5.11 |
sfpsConnectionQueryAPIBytesNumber of bytes switched on this connection.ro Counter .1.3.6.1.4.1.52.4.2.4.2.1.3.5.12 |
sfpsConnectionQueryAPICanAgeDetermine if this connection will be aged - (1) means to age.ro INTEGER .1.3.6.1.4.1.52.4.2.4.2.1.3.5.13 |
sfpsConnectionQueryAPIOutPortsIf OutPorts is 1 - the multiple outports will be displayed in
a text format.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.52.4.2.4.2.1.3.5.14 |
sfpsConnectionQueryAPIMacAddrMAC address.rw SfpsAddress .1.3.6.1.4.1.52.4.2.4.2.1.3.5.15 |
sfpsConnectionQueryAPISecInPortro INTEGER .1.3.6.1.4.1.52.4.2.4.2.1.3.5.16 |
sfpsConnectionQueryAPISecOutPortro INTEGER .1.3.6.1.4.1.52.4.2.4.2.1.3.5.17 |
sfpsConnectionQueryAPISecOutPortsro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.52.4.2.4.2.1.3.5.18 |
sfpsConnectionTestAPIVerbrw Enumeration .1.3.6.1.4.1.52.4.2.4.2.1.3.6.1 |
sfpsConnectionTestAPITyperw Enumeration .1.3.6.1.4.1.52.4.2.4.2.1.3.6.2 |
sfpsConnectionTestAPINumCnxsrw INTEGER .1.3.6.1.4.1.52.4.2.4.2.1.3.6.3 |
sfpsConnectionTestAPIMacAddrrw SfpsAddress .1.3.6.1.4.1.52.4.2.4.2.1.3.6.4 |
sfpsConnectionTestAPIPortrw INTEGER .1.3.6.1.4.1.52.4.2.4.2.1.3.6.5 |
sfpsAPIVerbSpecifies the action to be initiated as a result of setting
this leaf.rw Enumeration .1.3.6.1.4.1.52.4.2.4.2.1.4.1 |
sfpsAPIInPortSpecifies the ingress port of the switch.rw SfpsSwitchPort .1.3.6.1.4.1.52.4.2.4.2.1.4.2 |
sfpsAPIInHeaderTypeSpecfies the type of header being mapped.rw Enumeration .1.3.6.1.4.1.52.4.2.4.2.1.4.3 |
sfpsAPIInHeaderLengthSpecifies the length of the header value.rw INTEGER .1.3.6.1.4.1.52.4.2.4.2.1.4.4 |
sfpsAPIInHeaderValueSpecifies the actual inHeader value for the mapping.rw OCTET STRING .1.3.6.1.4.1.52.4.2.4.2.1.4.5 |
sfpsAPIOutPortSpecifies the egress port of the switch.rw SfpsSwitchPort .1.3.6.1.4.1.52.4.2.4.2.1.4.6 |
sfpsAPIOutHeaderTypeSpecfies the type of header being mapped. This value
defaults to the value given to sfpsAPIInHeaderType.rw Enumeration .1.3.6.1.4.1.52.4.2.4.2.1.4.7 |
sfpsAPIOutHeaderLengthSpecifies the length of the header value. This value
defaults to the value given to sfpsAPIInHeaderLength.rw INTEGER .1.3.6.1.4.1.52.4.2.4.2.1.4.8 |
sfpsAPIOutHeaderValueSpecifies the actual outHeader value for the mapping.
This value defaults to the value given to
sfpsAPIInHeaderValue.rw OCTET STRING .1.3.6.1.4.1.52.4.2.4.2.1.4.9 |
sfpsAPIArgumentDirectionSpecifies the direction of the connection.rw Enumeration .1.3.6.1.4.1.52.4.2.4.2.1.4.10 |
sfpsAPIArgumentOwnerSpecifies whether or not callcontrol is owned by this
agent switch. If the call is owned, then the switch will
be responsible for releasing the call. THis is used
mainly when transferring call ownership in call re-routing
and in setting up originating calls.rw Enumeration .1.3.6.1.4.1.52.4.2.4.2.1.4.11 |
sfpsAPIArgumentPrioritySpecifies the outbound priority of the connection.rw Enumeration .1.3.6.1.4.1.52.4.2.4.2.1.4.12 |
sfpsAPITypeSets the type of connection that should be setup.rw Enumeration .1.3.6.1.4.1.52.4.2.4.2.1.4.13 |
sfpsCNXPacketStatsVer1TxVersion 1 transmissionro INTEGER .1.3.6.1.4.1.52.4.2.4.2.1.15.1 |
sfpsCNXPacketStatsVer2TxVersion 2 transmissionro INTEGER .1.3.6.1.4.1.52.4.2.4.2.1.15.2 |
sfpsCNXPacketStatsVer1RxVersion 1 receivero INTEGER .1.3.6.1.4.1.52.4.2.4.2.1.15.3 |
sfpsCNXPacketStatsVer2RxVersion 2 receivero INTEGER .1.3.6.1.4.1.52.4.2.4.2.1.15.4 |
sfpsCNXPacketStatsOpCode1TxOperation code 1 transmissionro INTEGER .1.3.6.1.4.1.52.4.2.4.2.1.15.5 |
sfpsCNXPacketStatsOpCode2TxOperation code 2 tranmissionro INTEGER .1.3.6.1.4.1.52.4.2.4.2.1.15.6 |
sfpsCNXPacketStatsOpCode1RxOperation code 1 receivero INTEGER .1.3.6.1.4.1.52.4.2.4.2.1.15.7 |
sfpsCNXPacketStatsOpCode2RxOperation code 2 receivero INTEGER .1.3.6.1.4.1.52.4.2.4.2.1.15.8 |
sfpsCNXPacketStatsRxErrorsReceive errorsro INTEGER .1.3.6.1.4.1.52.4.2.4.2.1.15.9 |
sfpsConnectionPrimOutPortIdentifies the primary outbound SFPS switch port. All switched
traffic for this connection will be transmitted on
this outbound port.ro INTEGER .1.4 |
sfpsConnectionSecInPortIdentifies the secondaryinbound SFPS switch port.ro INTEGER .1.5 |
sfpsConnectionSecOutPortIdentifies the secondary outbound SFPS switch port. All switched
traffic for this connection will be transmitted on
this outbound port.ro INTEGER .1.6 |
sfpsConnectionCtrlStatusThe control state of the SFPS connection.rw Enumeration .1.7 |
sfpsConnectionAdminStatusThe administrative state of the SFPS connection.rw Enumeration .1.8 |
sfpsConnectionAgeIndicates the age of the connection.ro TimeTicks (SNMPv2-SMI) .1.9 |
sfpsConnectionTypeSets the type of connection. Provisioned connections are
setup manually; switched and vlan connections are setup
dynammically.ro Enumeration .1.10 |
sfpsConnectionPktsIndicates the total number of packets sent on this connection.ro Counter .1.11 |
sfpsConnectionBytesIndicates the total number of bytes sent on this connection.ro Counter .1.12 |
sfpsConnectionCanAgero INTEGER .1.13 |
sfpsConnectionPrimOutPortsIdentifies a list of outbound SFPS switch ports. All
switched traffic for this connection will be transmitted
on these outbound ports.ro DisplayString (SNMPv2-TC) .1.14 |
sfpsConnectionSecOutPortsIdentifies a list of outbound SFPS switch ports. All
switched traffic for this connection will be transmitted
on these outbound ports.ro DisplayString (SNMPv2-TC) .1.15 |