Home/Catalog/CTRON-SFPS-CALL-MIB

CTRON-SFPS-CALL-MIB

Name: SNMP MIBs and OID Database
Creator: Quadrata FZCO
License: https://opensource.org/licenses/MIT

AI MIB Summary

Standard SNMP MIB module defining data structures for CTRON-SFPS-CALL-MIB.

Objects

Active

Status

Dependencies

Imported Objects

RFC-1212

RFC1213-MIB

RFC1155-SMI

CTRON-SFPS-INCLUDE-MIB

Objects

54 total

Object Name	Syntax	OID
IMPORTSThis table contains the registered (active) call processors indexed (indirectly) by address and address type supported. SEQUENCE OF SfpsSapTableEntry `.1.3.6.1.4.1.52.4.2.4.2.2.2.2.1`	SEQUENCE OF SfpsSapTableEntry	`.1.3.6.1.4.1.52.4.2.4.2.2.2.2.1`
sfpsSapAPIVerb1 - getStatus and SAP info are entered, this action will get the current AdminStatus, OperStatus, and NvramStatus. (Must perform a mo_get after setting the above info to actually get the status info) 2 - next status. If this operation is successful, the verb will stay next, else it defaults to getStatus. 3 - first 4 - disable This does not effect the Status of this Entry in Nvram. 5 - disableInNvram Disabled in Nvram - This does not effect the Current Admin Status for this SAP Entry. 6 - enable This does not effect the Status of this Entry in Nvram. 7 - enableInNvram Enabled in Nvram - This does not effect the Current Admin Status for this SAP Entry. 8 - clearFromNvram (if set). 9 - clearAllNvram 10 - resetStats Current/Entered SAP Entry. 11 - resetAllStats all SAP Entries.rw Enumeration `.1.3.6.1.4.1.52.4.2.4.2.2.2.2.2.1`	Enumeration	`.1.3.6.1.4.1.52.4.2.4.2.2.2.2.2.1`
sfpsSapAPISourceCPThe name of the call processor initiating the the SAP attempts for this particular SAP load.rw DisplayString (SNMPv2-TC) `.1.3.6.1.4.1.52.4.2.4.2.2.2.2.2.2`	DisplayString (SNMPv2-TC)	`.1.3.6.1.4.1.52.4.2.4.2.2.2.2.2.2`
sfpsSapAPIDestCPThe destination call processor that is registered for with this source call processor for the given SAP load.rw DisplayString (SNMPv2-TC) `.1.3.6.1.4.1.52.4.2.4.2.2.2.2.2.3`	DisplayString (SNMPv2-TC)	`.1.3.6.1.4.1.52.4.2.4.2.2.2.2.2.3`
sfpsSapAPISAPEnter in the SAP for the desired SAP Entry.rw DisplayString (SNMPv2-TC) `.1.3.6.1.4.1.52.4.2.4.2.2.2.2.2.4`	DisplayString (SNMPv2-TC)	`.1.3.6.1.4.1.52.4.2.4.2.2.2.2.2.4`
sfpsSapAPINVStatusDisplays the Current Admin Status of this SAP Entry saved in Nvram.ro Enumeration `.1.3.6.1.4.1.52.4.2.4.2.2.2.2.2.5`	Enumeration	`.1.3.6.1.4.1.52.4.2.4.2.2.2.2.2.5`
sfpsSapAPIAdminStatusDisplays the Current AdminStatus of the SAP Entry.ro Enumeration `.1.3.6.1.4.1.52.4.2.4.2.2.2.2.2.6`	Enumeration	`.1.3.6.1.4.1.52.4.2.4.2.2.2.2.2.6`
sfpsSapAPIOperStatusDisplays the Current OperStatus of the SAP Entry.ro Enumeration `.1.3.6.1.4.1.52.4.2.4.2.2.2.2.2.7`	Enumeration	`.1.3.6.1.4.1.52.4.2.4.2.2.2.2.2.7`
sfpsSapAPINvSetTotal number of entries stored in NVRAM for persistence.ro INTEGER `.1.3.6.1.4.1.52.4.2.4.2.2.2.2.2.8`	INTEGER	`.1.3.6.1.4.1.52.4.2.4.2.2.2.2.2.8`
sfpsSapAPINVTotalTotal number of entries allocated in NVRAM. The switch will always allocate enough space in NVRAM for the number of elements. That is, NvTotal will always be greater than or equal to NvSet.rw INTEGER `.1.3.6.1.4.1.52.4.2.4.2.2.2.2.2.9`	INTEGER	`.1.3.6.1.4.1.52.4.2.4.2.2.2.2.2.9`
sfpsSapAPINumAcceptro INTEGER `.1.3.6.1.4.1.52.4.2.4.2.2.2.2.2.10`	INTEGER	`.1.3.6.1.4.1.52.4.2.4.2.2.2.2.2.10`
sfpsSapAPINvDiscardro INTEGER `.1.3.6.1.4.1.52.4.2.4.2.2.2.2.2.11`	INTEGER	`.1.3.6.1.4.1.52.4.2.4.2.2.2.2.2.11`
sfpsSapAPIDefaultStatusro Enumeration `.1.3.6.1.4.1.52.4.2.4.2.2.2.2.2.12`	Enumeration	`.1.3.6.1.4.1.52.4.2.4.2.2.2.2.2.12`
sfpsCallByTupleTableThis table contains the call tags, and call states indexed (indirectly) by switch tuple (in port, src address, dst address) SEQUENCE OF SfpsCallByTupleEntry `.1.3.6.1.4.1.52.4.2.4.2.2.5.1.5.1`	SEQUENCE OF SfpsCallByTupleEntry	`.1.3.6.1.4.1.52.4.2.4.2.2.5.1.5.1`
sfpsCallByTupleEntryEach entry contains information pertaining to a call tag and its state. SfpsCallByTupleEntry `.1.3.6.1.4.1.52.4.2.4.2.2.5.1.5.1.1`	SfpsCallByTupleEntry	`.1.3.6.1.4.1.52.4.2.4.2.2.5.1.5.1.1`
sfpsCallByTupleInPortPort of the switch on which the packet associated with this call tag was seen.ro INTEGER `.1.3.6.1.4.1.52.4.2.4.2.2.5.1.5.1.1.1`	INTEGER	`.1.3.6.1.4.1.52.4.2.4.2.2.5.1.5.1.1.1`
sfpsCallByTupleSrcHashA hash of sfpsCallByTupleBotSrcAddress used to identify the instance.ro INTEGER `.1.3.6.1.4.1.52.4.2.4.2.2.5.1.5.1.1.2`	INTEGER	`.1.3.6.1.4.1.52.4.2.4.2.2.5.1.5.1.1.2`
sfpsCallByTupleDstHashA hash of sfpsCallByTupleTopDstAddress used to identify the instance.ro INTEGER `.1.3.6.1.4.1.52.4.2.4.2.2.5.1.5.1.1.3`	INTEGER	`.1.3.6.1.4.1.52.4.2.4.2.2.5.1.5.1.1.3`
sfpsCallByTupleHashIndexA count of non-unique sfpsCallByTupleSrcHash and sfpsCallByTupleDstHash pairs used to identify the instance.ro INTEGER `.1.3.6.1.4.1.52.4.2.4.2.2.5.1.5.1.1.4`	INTEGER	`.1.3.6.1.4.1.52.4.2.4.2.2.5.1.5.1.1.4`
sfpsCallByTupleBotSrcTypeThe source address type of the lowest known protocol layer.ro DisplayString (SNMPv2-TC) `.1.3.6.1.4.1.52.4.2.4.2.2.5.1.5.1.1.5`	DisplayString (SNMPv2-TC)	`.1.3.6.1.4.1.52.4.2.4.2.2.5.1.5.1.1.5`
sfpsCallByTupleBotSrcAddressThe source address value of the lowest known protocol layer.ro DisplayString (SNMPv2-TC) `.1.3.6.1.4.1.52.4.2.4.2.2.5.1.5.1.1.6`	DisplayString (SNMPv2-TC)	`.1.3.6.1.4.1.52.4.2.4.2.2.5.1.5.1.1.6`
sfpsCallByTupleBotDstTypeThe destination address type of the lowest known protocol layer.ro DisplayString (SNMPv2-TC) `.1.3.6.1.4.1.52.4.2.4.2.2.5.1.5.1.1.7`	DisplayString (SNMPv2-TC)	`.1.3.6.1.4.1.52.4.2.4.2.2.5.1.5.1.1.7`
sfpsCallByTupleBotDstAddressThe destination address value of the lowest known protocol layer.ro DisplayString (SNMPv2-TC) `.1.3.6.1.4.1.52.4.2.4.2.2.5.1.5.1.1.8`	DisplayString (SNMPv2-TC)	`.1.3.6.1.4.1.52.4.2.4.2.2.5.1.5.1.1.8`
sfpsCallByTupleTopSrcTypeThe source address type of the highest learned protocol layer.ro DisplayString (SNMPv2-TC) `.1.3.6.1.4.1.52.4.2.4.2.2.5.1.5.1.1.9`	DisplayString (SNMPv2-TC)	`.1.3.6.1.4.1.52.4.2.4.2.2.5.1.5.1.1.9`
sfpsCallByTupleTopSrcAddressThe source address value of the highest learned protocol layer.ro DisplayString (SNMPv2-TC) `.1.3.6.1.4.1.52.4.2.4.2.2.5.1.5.1.1.10`	DisplayString (SNMPv2-TC)	`.1.3.6.1.4.1.52.4.2.4.2.2.5.1.5.1.1.10`
sfpsCallByTupleTopDstTypeThe destination address type of the highest learned protocol layer.ro DisplayString (SNMPv2-TC) `.1.3.6.1.4.1.52.4.2.4.2.2.5.1.5.1.1.11`	DisplayString (SNMPv2-TC)	`.1.3.6.1.4.1.52.4.2.4.2.2.5.1.5.1.1.11`
sfpsCallByTupleTopDstAddressThe destination address value of the highest learned protocol layer.ro DisplayString (SNMPv2-TC) `.1.3.6.1.4.1.52.4.2.4.2.2.5.1.5.1.1.12`	DisplayString (SNMPv2-TC)	`.1.3.6.1.4.1.52.4.2.4.2.2.5.1.5.1.1.12`
sfpsCallByTupleCallProcNameThe name of the call processor responsible for all signaling for this packet/call tag.ro DisplayString (SNMPv2-TC) `.1.3.6.1.4.1.52.4.2.4.2.2.5.1.5.1.1.13`	DisplayString (SNMPv2-TC)	`.1.3.6.1.4.1.52.4.2.4.2.2.5.1.5.1.1.13`
sfpsCallByTupleCallTagThe number used to reference this packet and its associated calls.ro HexInteger `.1.3.6.1.4.1.52.4.2.4.2.2.5.1.5.1.1.14`	HexInteger	`.1.3.6.1.4.1.52.4.2.4.2.2.5.1.5.1.1.14`
sfpsCallByTupleCallStateThe current state of the packet in the call processor.ro DisplayString (SNMPv2-TC) `.1.3.6.1.4.1.52.4.2.4.2.2.5.1.5.1.1.15`	DisplayString (SNMPv2-TC)	`.1.3.6.1.4.1.52.4.2.4.2.2.5.1.5.1.1.15`
sfpsCallByTupleTimeRemainingThe number of time ticks remaining before this entry's timer expires and it is removed from the table.ro TimeTicks (SNMPv2-SMI) `.1.3.6.1.4.1.52.4.2.4.2.2.5.1.5.1.1.16`	TimeTicks (SNMPv2-SMI)	`.1.3.6.1.4.1.52.4.2.4.2.2.5.1.5.1.1.16`
sfpsCallTableStatsRamThe number of bytes used by the Call Table.ro INTEGER `.1.3.6.1.4.1.52.4.2.4.2.2.5.1.6.1`	INTEGER	`.1.3.6.1.4.1.52.4.2.4.2.2.5.1.6.1`
sfpsCallTableStatsSizeThe number of entries in the Call Table.ro INTEGER `.1.3.6.1.4.1.52.4.2.4.2.2.5.1.6.2`	INTEGER	`.1.3.6.1.4.1.52.4.2.4.2.2.5.1.6.2`
sfpsCallTableStatsInUseThe current number of calls in use. A call goes into this table only if it is being blocked (waiting for resolve or sent new user).ro INTEGER `.1.3.6.1.4.1.52.4.2.4.2.2.5.1.6.3`	INTEGER	`.1.3.6.1.4.1.52.4.2.4.2.2.5.1.6.3`
sfpsCallTableStatsMaxThe maximum number of calls that the switch maintained.ro INTEGER `.1.3.6.1.4.1.52.4.2.4.2.2.5.1.6.4`	INTEGER	`.1.3.6.1.4.1.52.4.2.4.2.2.5.1.6.4`
sfpsCallTableStatsTotMissesThe number of times that there were no calls available in the Call Table. This would be the number of calls that had to be dropped.ro INTEGER `.1.3.6.1.4.1.52.4.2.4.2.2.5.1.6.5`	INTEGER	`.1.3.6.1.4.1.52.4.2.4.2.2.5.1.6.5`
sfpsCallTableStatsMissStartTime when last miss occurredro TimeTicks (SNMPv2-SMI) `.1.3.6.1.4.1.52.4.2.4.2.2.5.1.6.7`	TimeTicks (SNMPv2-SMI)	`.1.3.6.1.4.1.52.4.2.4.2.2.5.1.6.7`
sfpsCallTableStatsMissStopTime when missing stoppedro TimeTicks (SNMPv2-SMI) `.1.3.6.1.4.1.52.4.2.4.2.2.5.1.6.8`	TimeTicks (SNMPv2-SMI)	`.1.3.6.1.4.1.52.4.2.4.2.2.5.1.6.8`
sfpsCallTableStatsLastMissNumber of calls dropped in last miss, also write 0 to filesrw INTEGER `.1.3.6.1.4.1.52.4.2.4.2.2.5.1.6.9`	INTEGER	`.1.3.6.1.4.1.52.4.2.4.2.2.5.1.6.9`
sfpsSapTableEntryEach entry contains information pertaining to an active call processor. SfpsSapTableEntry `.sfpsSapTable.1`	SfpsSapTableEntry	`.sfpsSapTable.1`
sfpsSapTableTagA type tag used to sort and index the table entries.ro INTEGER `.sfpsSapTable.1.1`	INTEGER	`.sfpsSapTable.1.1`
sfpsSapTableHashA hash of the sfpsSapTableAddress used to identify the instance.ro INTEGER `.sfpsSapTable.1.2`	INTEGER	`.sfpsSapTable.1.2`
sfpsSapTableHashIndexA count of the non-unique sfpsSapTableAddress hashes used to identify the instance.ro INTEGER `.sfpsSapTable.1.3`	INTEGER	`.sfpsSapTable.1.3`
sfpsSapTableSourceCPThe name of the call processor initiating the the SAP attempts for this particular SAP load.ro DisplayString (SNMPv2-TC) `.sfpsSapTable.1.4`	DisplayString (SNMPv2-TC)	`.sfpsSapTable.1.4`
sfpsSapTableDestCPThe destination call processor that is registered for with this source call processor for the given SAP load.ro DisplayString (SNMPv2-TC) `.sfpsSapTable.1.5`	DisplayString (SNMPv2-TC)	`.sfpsSapTable.1.5`
sfpsSapTableSAPThe value of the SAP in 0x format.ro DisplayString (SNMPv2-TC) `.sfpsSapTable.1.6`	DisplayString (SNMPv2-TC)	`.sfpsSapTable.1.6`
sfpsSapTableOperStatusDisplays the Current OperStatus of the SAP entry.ro Enumeration `.sfpsSapTable.1.7`	Enumeration	`.sfpsSapTable.1.7`
sfpsSapTableAdminStatusDisplays the Current AdminStatus of the SAP entry.ro Enumeration `.sfpsSapTable.1.8`	Enumeration	`.sfpsSapTable.1.8`
sfpsSapTableStateTimeTotal number of SFPSElements stored in NVRAM for persistence.ro TimeTicks (SNMPv2-SMI) `.sfpsSapTable.1.9`	TimeTicks (SNMPv2-SMI)	`.sfpsSapTable.1.9`
sfpsSapTableDescriptionText description of the entry.ro DisplayString (SNMPv2-TC) `.sfpsSapTable.1.10`	DisplayString (SNMPv2-TC)	`.sfpsSapTable.1.10`
sfpsSapTableNumAcceptedNumber accepted by the SAP.ro INTEGER `.sfpsSapTable.1.11`	INTEGER	`.sfpsSapTable.1.11`
sfpsSapTableNumDroppedNumber dropped by the SAP.ro INTEGER `.sfpsSapTable.1.12`	INTEGER	`.sfpsSapTable.1.12`
sfpsSapTableUnicastSaprw INTEGER `.sfpsSapTable.1.13`	INTEGER	`.sfpsSapTable.1.13`
sfpsSapTableNVStatusStatus in NVRAM for persistence.ro Enumeration `.sfpsSapTable.1.14`	Enumeration	`.sfpsSapTable.1.14`