CTRON-SFPS-BASE-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for CTRON-SFPS-BASE-MIB.
133
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
133 total| Object Name |
|---|
IMPORTSThis table contains all Call Processors registered with the
CPResources Table and is indexed by the Call Processor id. SEQUENCE OF SfpsCPResourcesTableEntry .1.3.6.1.4.1.52.4.2.4.2.2.2.3.1 |
sfpsCPResourcesAPI OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.2.4.2.2.2.3.2 |
sfpsCPResourcesAPIIDIdentifier for the call processor.rw INTEGER .1.3.6.1.4.1.52.4.2.4.2.2.2.3.2.1 |
sfpsCPResourcesAPIAdminStatusAdministrative status of the call processor.rw Enumeration .1.3.6.1.4.1.52.4.2.4.2.2.2.3.2.2 |
sfpsCPResourcesAPIAttributeCall processor attribute/features.rw Enumeration .1.3.6.1.4.1.52.4.2.4.2.2.2.3.2.3 |
sfpsCPResourcesAPIScopeScope this attribute to switch or port.rw Enumeration .1.3.6.1.4.1.52.4.2.4.2.2.2.3.2.4 |
sfpsCPResourcesAPIPersistanceParameter to make persistent on switch reset.rw Enumeration .1.3.6.1.4.1.52.4.2.4.2.2.2.3.2.5 |
sfpsCPResourcesAPIVerbAction to perform.rw Enumeration .1.3.6.1.4.1.52.4.2.4.2.2.2.3.2.6 |
sfpsServiceCenterFacilityTableThis table gives facility semantics to call processing. SEQUENCE OF SfpsServiceCenterFacilityEntry .1.3.6.1.4.1.52.4.2.4.2.2.2.4.9 |
sfpsServiceCenterFacilityEntryEach entry contains the configuration of the Facility Entry. SfpsServiceCenterFacilityEntry .1.3.6.1.4.1.52.4.2.4.2.2.2.4.9.1 |
sfpsServiceCenterFacilityHashLeafServer hash, part of instance key.ro HexInteger .1.3.6.1.4.1.52.4.2.4.2.2.2.4.9.1.1 |
sfpsServiceCenterFacilityMetricDefines order servers are called low to high.ro INTEGER .1.3.6.1.4.1.52.4.2.4.2.2.2.4.9.1.2 |
sfpsServiceCenterFacilityNameServer name.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.52.4.2.4.2.2.2.4.9.1.3 |
sfpsServiceCenterFacilityOperStatusOperational state of entry.ro Enumeration .1.3.6.1.4.1.52.4.2.4.2.2.2.4.9.1.4 |
sfpsServiceCenterFacilityAdminStatusAdministrative State of Entry.rw Enumeration .1.3.6.1.4.1.52.4.2.4.2.2.2.4.9.1.5 |
sfpsServiceCenterFacilityStatusTimeTime Tick of last operStatus change.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.52.4.2.4.2.2.2.4.9.1.6 |
sfpsServiceCenterFacilityRequestsRequests made to server.ro INTEGER .1.3.6.1.4.1.52.4.2.4.2.2.2.4.9.1.7 |
sfpsServiceCenterFacilityReplyGOOD replies by server.ro INTEGER .1.3.6.1.4.1.52.4.2.4.2.2.2.4.9.1.8 |
sfpsCSPControlTableCabletron Switch Protocol Control statistics SEQUENCE OF SfpsCSPControlTableEntry .1.3.6.1.4.1.52.4.2.4.2.2.2.5.1 |
sfpsCSPControlTableEntry SfpsCSPControlTableEntry .1.3.6.1.4.1.52.4.2.4.2.2.2.5.1.1 |
sfpsCSPControlTableIndexro INTEGER .1.3.6.1.4.1.52.4.2.4.2.2.2.5.1.1.1 |
sfpsCSPControlTableCSPTypero INTEGER .1.3.6.1.4.1.52.4.2.4.2.2.2.5.1.1.2 |
sfpsCSPControlTableCSPNamero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.52.4.2.4.2.2.2.5.1.1.3 |
sfpsCSPControlTableAdminStatusrw Enumeration .1.3.6.1.4.1.52.4.2.4.2.2.2.5.1.1.4 |
sfpsCSPControlTableSwitchToCallProcro Enumeration .1.3.6.1.4.1.52.4.2.4.2.2.2.5.1.1.5 |
sfpsCSPControlTablePktsProcessedro INTEGER .1.3.6.1.4.1.52.4.2.4.2.2.2.5.1.1.6 |
sfpsCSPControlTablePktRatero INTEGER .1.3.6.1.4.1.52.4.2.4.2.2.2.5.1.1.7 |
sfpsBlockSourceTableThe SourceBlocker table lists all nodes (MAC addresses) that
have been heard locally on the switch. Only a certain subset
(if any) of the nodes in this table are blocked. SEQUENCE OF SfpsBlockSourceEntry .1.3.6.1.4.1.52.4.2.4.2.2.14.1.1 |
sfpsBlockSourceEntryEntry in the SourceBlocker table indexed by a counter. SfpsBlockSourceEntry .1.3.6.1.4.1.52.4.2.4.2.2.14.1.1.1 |
sfpsBlockSourceIndexThe index into the tablero INTEGER .1.3.6.1.4.1.52.4.2.4.2.2.14.1.1.1.1 |
sfpsBlockSourceMACThe MAC address of the node.ro SfpsAddress .1.3.6.1.4.1.52.4.2.4.2.2.14.1.1.1.2 |
sfpsBlockSourceElapTimeShortThe elapsed time (seconds) in the current short-threshold
period.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.52.4.2.4.2.2.14.1.1.1.3 |
sfpsBlockSourceNumCallsShortThe number of packets seen from the node during the elapsed
time for the short-threshold.ro INTEGER .1.3.6.1.4.1.52.4.2.4.2.2.14.1.1.1.4 |
sfpsBlockSourceElapTimeLongThe elapsed time (seconds) in the current long-threshold
period.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.52.4.2.4.2.2.14.1.1.1.5 |
sfpsBlockSourceNumCallLongThe number of packets seen from the node during the elapsed
time for the long-threshold.ro INTEGER .1.3.6.1.4.1.52.4.2.4.2.2.14.1.1.1.6 |
sfpsBlockSourceBlockFlagDescribes whether the node is blocked or not. There are three
possible integer values for this field: 0-notBlocked,
1-Blocked, 2-WouldBeBlocked. The WouldBeBlocked value is used
to represent a node that would be in the blocked state if the
SourceBlocker was enabled. A node can get into this state only
if the blocker is disabled. If the blocker is enabled at this
point, the node will be blocked, and a connection filter will
be put in place when the next packet is received from this
node.ro Enumeration .1.3.6.1.4.1.52.4.2.4.2.2.14.1.1.1.7 |
sfpsBlockSourceUnBlockableFlagFlags a node as either Blockable(0) or Unblockable(1). When a
node is unblockable, it will never be blocked regardless of the
number of packets it sends. The default setting is blockable.
Any node can be changed to unblockable via the Source Blocker
API (SBAPI).ro Enumeration .1.3.6.1.4.1.52.4.2.4.2.2.14.1.1.1.8 |
sfpsBlockSourceFilterPresentFlags whether or not a connection filter is in place for the
given node. (This attribute cannot be changed on its own and is
therefore used only for diagnostic purposes. It is used
internally so that only one filter connection will be mapped
per node.)ro INTEGER .1.3.6.1.4.1.52.4.2.4.2.2.14.1.1.1.9 |
sfpsBlockSourceNextIf this node entry (instance) is part of a hash chain, the
NEXT leaf will contain the index to the next node entry in
the chain. Otherwise, it will contain -1.ro INTEGER .1.3.6.1.4.1.52.4.2.4.2.2.14.1.1.1.10 |
sfpsBlockSourceBlocksOnlyIndexContains the index into the BlockSourceOnly table or the
UnblockableOnly table depending on the entry flags. If the
'blocked flag' is set, this value represents the index into
the BlockSourceOnly table. If the 'unblockable' flag is set,
this value represents the index into the UnblockableOnly
table. Otherwise, this value is set to -1 (representing that
it is not used.)ro INTEGER .1.3.6.1.4.1.52.4.2.4.2.2.14.1.1.1.11 |
sfpsBlockSourceOnlyTableThe format of the BlockSourceOnly Table is exactly the same as the
SourceBlocker Table. The only difference is that the entries in
this table are only a subset of the entries in the SourceBlocker
Table. Only the entries that have a BLOCKFLAG set to 'blocked' or
'would-be-blocked' will reside in this table. SEQUENCE OF SfpsBlockSourceOnlyEntry .1.3.6.1.4.1.52.4.2.4.2.2.14.2.1 |
sfpsBlockSourceOnlyEntryEntry in the BlockSourceOnly table indexed by a counter. SfpsBlockSourceOnlyEntry .1.3.6.1.4.1.52.4.2.4.2.2.14.2.1.1 |
sfpsBlockSourceOnlyIndexThe index into the tablero INTEGER .1.3.6.1.4.1.52.4.2.4.2.2.14.2.1.1.1 |
sfpsBlockSourceOnlyMACThe MAC address of the node.ro SfpsAddress .1.3.6.1.4.1.52.4.2.4.2.2.14.2.1.1.2 |
sfpsBlockSourceOnlyElapTimeShortThe elapsed time (seconds) in the current short-threshold
period.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.52.4.2.4.2.2.14.2.1.1.3 |
sfpsBlockSourceOnlyNumCallsShortThe number of packets seen from the node during the elapsed
time for the short-threshold.ro INTEGER .1.3.6.1.4.1.52.4.2.4.2.2.14.2.1.1.4 |
sfpsBlockSourceOnlyElapTimeLongThe elapsed time (seconds) in the current long-threshold
period.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.52.4.2.4.2.2.14.2.1.1.5 |
sfpsBlockSourceOnlyNumCallLongThe number of packets seen from the node during the elapsed
time for the long-threshold.ro INTEGER .1.3.6.1.4.1.52.4.2.4.2.2.14.2.1.1.6 |
sfpsBlockSourceOnlyBlockFlagDescribes whether the node is blocked or not. There are three
possible integer values for this field: 0-notBlocked,
1-Blocked, 2-WouldBeBlocked. The WouldBeBlocked value is used
to represent a node that would be in the blocked state if the
SourceBlocker was enabled. A node can get into this state only
if the blocker is disabled. If the blocker is enabled at this
point, the node will be blocked, and a connection filter will
be put in place when the next packet is received from this
node.ro Enumeration .1.3.6.1.4.1.52.4.2.4.2.2.14.2.1.1.7 |
sfpsBlockSourceOnlyUnBlockableFlagFlags a node as either Blockable(0) or Unblockable(1). When a
node is unblockable, it will never be blocked regardless of the
number of packets it sends. The default setting is blockable.
Any node can be changed to unblockable via the Source Blocker
API (SBAPI).ro Enumeration .1.3.6.1.4.1.52.4.2.4.2.2.14.2.1.1.8 |
sfpsBlockSourceOnlyFilterPresentFlags whether or not a connection filter is in place for the
given node. (This attribute cannot be changed on its own and is
therefore used only for diagnostic purposes. It is used
internally so that only one filter connection will be mapped
per node.)ro INTEGER .1.3.6.1.4.1.52.4.2.4.2.2.14.2.1.1.9 |
sfpsBlockSourceOnlyNextIf this node entry (instance) is part of a hash chain, the
NEXT leaf will contain the index to the next node entry in
the chain. Otherwise, it will contain -1.ro INTEGER .1.3.6.1.4.1.52.4.2.4.2.2.14.2.1.1.10 |
sfpsBlockSourceOnlyBlocksOnlyIndexContains the index into the BlockSourceOnly table or the
UnblockableOnly table depending on the entry flags. If the
'blocked' flag is set, this value represents the index into
the BlockSourceOnly table. If the 'unblockable' flag is set,
this value represents the index into the UnblockableOnly
table. Otherwise, this value is set to -1 (representing that
it is not used.)ro INTEGER .1.3.6.1.4.1.52.4.2.4.2.2.14.2.1.1.11 |
sfpsBlockSourcePortTableThe SourceBlock API allows for administratively selecting a port and
flagging it as 'unblockable'. The BlockSourcePort table shows which
ports are set to 'unblockable' and which ones remain set to the default
'blockable' setting. SEQUENCE OF SfpsBlockSourcePortEntry .1.3.6.1.4.1.52.4.2.4.2.2.14.3.1 |
sfpsBlockSourcePortEntryEntry into the BlockSourcePort Table SfpsBlockSourcePortEntry .1.3.6.1.4.1.52.4.2.4.2.2.14.3.1.1 |
sfpsBlockSourcePortPortThis is the instance part of the table. There will be as many
instances as there are logical ports in the device. The attributes
represented in subsequent leaves all pertain to this port instance.ro INTEGER .1.3.6.1.4.1.52.4.2.4.2.2.14.3.1.1.1 |
sfpsBlockSourcePortBlockabilityThis leaf contains either 0-blockable or 1-unblockable, depending on
whether nodes on this port are allowed to be blocked or not.ro Enumeration .1.3.6.1.4.1.52.4.2.4.2.2.14.3.1.1.2 |
sfpsBlockSourceAPIVerbOther
Disable
blocked will remain blocked, but no additional nodes will be blocked)
Enable
ClearAll
connection filters, and should only be used as a diagnostic tool.)
BlockMac
must be previously set in the MAC leaf.)
UnblockMac
must be previously set in the MAC leaf.)
SetMacUnblockable
so that it cannot be blocked. (The node's MAC must be previously set
in the MAC leaf.) If the relevant node is blocked at the time the
SetMacUnblockable command is issued, the node will automatically be
'unblocked' first.
SetMacBlockable
it can be blocked. (The node's MAC must be previously set in the MAC
leaf.)
SetPortUnblockable
that any nodes on that port cannot be blocked. (The port number must
be previously set in the Port leaf.)
SetPortBlockable
all nodes on that port can be blocked. (The port number must be
previously set in the Port leaf.)
SetReapUserCnx
mark a port as 'blockable' so that.)rw Enumeration .1.3.6.1.4.1.52.4.2.4.2.2.14.4.1 |
sfpsBlockSourceAPIInputValueSet the input value to enterrw INTEGER .1.3.6.1.4.1.52.4.2.4.2.2.14.4.2 |
sfpsBlockSourceAPIPortRead/Write leaf used in conjunction with SetPortUnblockable and
SetPortBlockable. (values of 1 through numLogicalPorts are valid.rw INTEGER .1.3.6.1.4.1.52.4.2.4.2.2.14.4.3 |
sfpsBlockSourceAPIMACLeaf used to set the MAC address that will be operated on with one
of the above verbs.rw SfpsAddress .1.3.6.1.4.1.52.4.2.4.2.2.14.4.4 |
sfpsBlockSourceAPIBlockStatusStatus of the blocker object (enabled/disabled.) Additional nodes
will be blocked only when this status leaf is in the 'enabled' state.rw Enumeration .1.3.6.1.4.1.52.4.2.4.2.2.14.4.5 |
sfpsBlockSourceAPIShortThresholdThe number of packets per a SHORTPERIOD that will result in a node
being blocked. This can be changed by writing directly to this leaf.
The only limit imposed on this value is that it has to be positive
(greater than zero.) There is no upper bound except for what is
implied by the size of an integer.rw INTEGER .1.3.6.1.4.1.52.4.2.4.2.2.14.4.6 |
sfpsBlockSourceAPIShortPeriodThe sample period to use for determining if any given node has
exceeded the SHORTTHRESHOLD. See SHORTTHRESHOLD for bounds checking
for this valuerw INTEGER .1.3.6.1.4.1.52.4.2.4.2.2.14.4.7 |
sfpsBlockSourceAPILongThresholdThe number of packets per a LONGPERIOD that will result in a node
being blocked. See SHORTTHRESHOLD for bounds checking for this value.rw INTEGER .1.3.6.1.4.1.52.4.2.4.2.2.14.4.8 |
sfpsBlockSourceAPILongPeriodThe sample period to use for determining if any given node has
exceeded the LONGTHRESHOLD. See SHORTTHRESHOLD for bounds checking
for this value.rw INTEGER .1.3.6.1.4.1.52.4.2.4.2.2.14.4.9 |
sfpsBlockSourceAPIReapUserCnxsThe sample period to use for determining if any given node has
exceeded the LONGTHRESHOLD. See SHORTTHRESHOLD for bounds checking
for this value.rw INTEGER .1.3.6.1.4.1.52.4.2.4.2.2.14.4.10 |
sfpsBlockSourceExcludeTableThe format of the UnblockableOnly Table is exactly the same as the
SourceBlocker Table. The only difference is that the entries in this
table are only a subset of the entries in the SourceBlocker Table.
Only the entries that have an UNBLOCKABLEFLAG set to 'unblockable'
will show up in this table. SEQUENCE OF SfpsBlockSourceExcludeEntry .1.3.6.1.4.1.52.4.2.4.2.2.14.5.1 |
sfpsBlockSourceExcludeEntryEntry in the BlockSourceOnly table indexed by a counter. SfpsBlockSourceExcludeEntry .1.3.6.1.4.1.52.4.2.4.2.2.14.5.1.1 |
sfpsBlockSourceExcludeIndexThe index into the tablero INTEGER .1.3.6.1.4.1.52.4.2.4.2.2.14.5.1.1.1 |
sfpsBlockSourceExcludeMACThe MAC address of the node.ro SfpsAddress .1.3.6.1.4.1.52.4.2.4.2.2.14.5.1.1.2 |
sfpsBlockSourceExcludeElapTimeShortThe elapsed time (seconds) in the current short-threshold
period.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.52.4.2.4.2.2.14.5.1.1.3 |
sfpsBlockSourceExcludeNumCallsShortThe number of packets seen from the node during the elapsed
time for the short-thresholdro INTEGER .1.3.6.1.4.1.52.4.2.4.2.2.14.5.1.1.4 |
sfpsBlockSourceExcludeElapTimeLongThe elapsed time (seconds) in the current long-threshold
periodro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.52.4.2.4.2.2.14.5.1.1.5 |
sfpsBlockSourceExcludeNumCallLongThe number of packets seen from the node during the elapsed
time for the long-threshold.ro INTEGER .1.3.6.1.4.1.52.4.2.4.2.2.14.5.1.1.6 |
sfpsBlockSourceExcludeBlockFlagDescribes whether the node is blocked or not. There are three
possible integer values for this field: 0-notBlocked,
1-Blocked, 2-WouldBeBlocked. The WouldBeBlocked value is used
to represent a node that would be in the blocked state if the
SourceBlocker was enabled. A node can get into this state only
if the blocker is disabled. If the blocker is enabled at this
point, the node will be blocked, and a connection filter will
be put in place when the next packet is received from this
nodero Enumeration .1.3.6.1.4.1.52.4.2.4.2.2.14.5.1.1.7 |
sfpsBlockSourceExcludeUnBlockableFlagFlags a node as either Blockable(0) or Unblockable(1). When a
node is unblockable, it will never be blocked regardless of the
number of packets it sends. The default setting is blockable.
Any node can be changed to unblockable via the Source Blocker
API (SBAPI).ro Enumeration .1.3.6.1.4.1.52.4.2.4.2.2.14.5.1.1.8 |
sfpsBlockSourceExcludeFilterPresentFlags whether or not a connection filter is in place for the
given node. (This attribute cannot be changed on its own and is
therefore used only for diagnostic purposes. It is used
internally so that only one filter connection will be mapped
per node.)ro INTEGER .1.3.6.1.4.1.52.4.2.4.2.2.14.5.1.1.9 |
sfpsBlockSourceExcludeNextIf this node entry (instance) is part of a hash chain, the
NEXT leaf will contain the index to the next node entry in
the chain. Otherwise, it will contain -1ro INTEGER .1.3.6.1.4.1.52.4.2.4.2.2.14.5.1.1.10 |
sfpsBlockSourceExcludeBlockSourceOnlyIndexContains the index into the BlockSourceOnly table or the
UnblockableOnly table depending on the entry flags. If the
'blocked' flag is set, this value represents the index into
the BlockSourceOnly table. If the 'unblockable' flag is set,
this value represents the index into the UnblockableOnly
table. Otherwise, this value is set to -1 (representing that
it is not usedro INTEGER .1.3.6.1.4.1.52.4.2.4.2.2.14.5.1.1.11 |
sfpsBlockSourceStatsNumBlocksro INTEGER .1.3.6.1.4.1.52.4.2.4.2.2.14.6.1 |
sfpsBlockSourceStatsNumCollisionsThe number of hash collisions resulting in a chain of nodes.
(diagnostic only.)ro INTEGER .1.3.6.1.4.1.52.4.2.4.2.2.14.6.2 |
sfpsBlockSourceStatsLongestChainThe maximum number of nodes in a linked list chain
(including the hash bucket itself) due to hashing collisions.
(diagnostic only.)ro INTEGER .1.3.6.1.4.1.52.4.2.4.2.2.14.6.3 |
sfpsBlockSourceStatsNumEntriesThe number of entries in the SourceBlocker table.
(Each new node that is heard has its own entry.ro INTEGER .1.3.6.1.4.1.52.4.2.4.2.2.14.6.4 |
sfpsBlockSourceStatsMaxNumEntriesThe maximum number of entries that can fit in the SourceBlocker Table.
(This currently mirrors the size of the Directory's NodeTable.)ro INTEGER .1.3.6.1.4.1.52.4.2.4.2.2.14.6.5 |
sfpsBlockSourceStatsSizeOfObjThe size of the SourceBlocker object itself (in bytes.)ro INTEGER .1.3.6.1.4.1.52.4.2.4.2.2.14.6.6 |
sfpsBlockSourceStatsHashModValueThe value that is used for the modulus operation in the
hashing algorythm.ro INTEGER .1.3.6.1.4.1.52.4.2.4.2.2.14.6.7 |
sfpsBlockSourceStatsHashSlotsSizeThe amount of storage used for the hash buckets (in bytes.)ro INTEGER .1.3.6.1.4.1.52.4.2.4.2.2.14.6.8 |
sfpsBlockSourceStatsTableSizeThe amount of storage used for the SourceBlocker Table (in bytes.)ro INTEGER .1.3.6.1.4.1.52.4.2.4.2.2.14.6.9 |
sfpsBlockSourceStatsBlockSourceOnlySizeThe amount of storage used for the Blocks-Only index array (in bytes.)ro INTEGER .1.3.6.1.4.1.52.4.2.4.2.2.14.6.10 |
sfpsBlockSourceStatsUnblockableSizeThe amount of storage used for the Unblockable-Only index array
(in bytes.)ro INTEGER .1.3.6.1.4.1.52.4.2.4.2.2.14.6.11 |
sfpsBlockSourceStatsPortMaskSizeThe amount of storage used for the port mask object (in bytes.)ro INTEGER .1.3.6.1.4.1.52.4.2.4.2.2.14.6.12 |
sfpsBlockSourceStatsTotalHeapBytesThe total amount of heap memory used for all data storage (above)
including the SourceBlocker object itself (in bytes.)ro INTEGER .1.3.6.1.4.1.52.4.2.4.2.2.14.6.13 |
sfpsDHCPServerVLANNamerw OCTET STRING .1.3.6.1.4.1.52.4.2.4.2.2.15.1 |
sfpsDHCPServerVLANSingleFloodStatusrw Enumeration .1.3.6.1.4.1.52.4.2.4.2.2.15.2 |
sfpsDHCPServerVLANVersionro INTEGER .1.3.6.1.4.1.52.4.2.4.2.2.15.3 |
sfpsATalkAMRVLANControlNamerw OCTET STRING .1.3.6.1.4.1.52.4.2.4.2.2.16.1 |
sfpsATalkAMRVLANControlVersionro INTEGER .1.3.6.1.4.1.52.4.2.4.2.2.16.2 |
sfpsCPResourcesTableEntryEach entry contains information pertaining to a Call Processor. SfpsCPResourcesTableEntry .sfpsCPResourcesTable.1 |
sfpsCPResourcesTableIdCall Processor id used to index into the table.ro INTEGER .sfpsCPResourcesTable.1.1 |
sfpsCPResourcesTableNameThe name of the associated Call Processor.ro DisplayString (SNMPv2-TC) .sfpsCPResourcesTable.1.2 |
sfpsCPResourcesTableOperStatusOperational state of entry.ro Enumeration .sfpsCPResourcesTable.1.3 |
sfpsCPResourcesTableAdminStatusThis value represents the current administration status of the
associated Call Processor. When enabled(3) the Call Processor
is still allowed to call process packets.
When this value is disabled(2) the call processor will not
process any packets.ro Enumeration .sfpsCPResourcesTable.1.4 |
sfpsCPResourcesTableStateTimeThe last time that this Call Processor has changed states.ro TimeTicks (SNMPv2-SMI) .sfpsCPResourcesTable.1.5 |
sfpsCPResourcesTablePtsInThe number of packets that have been sent to this Call
Processor to be handled.ro INTEGER .sfpsCPResourcesTable.1.6 |
sfpsCPResourcesTablePtsUsedThe number of packets that have been sent to this Call
Processor and accepted for the purpose of processing.ro INTEGER .sfpsCPResourcesTable.1.7 |
sfpsCPResourcesTablePolicyFloodNumber of packets flooded due to Policy.ro INTEGER .sfpsCPResourcesTable.1.8 |
sfpsCPResourcesResolveFloodNumber of packets flooded due to not able to Resolve.ro INTEGER .sfpsCPResourcesTable.1.9 |
sfpsCPResourcesConnectOKNumber of packets that caused a successful connect.ro INTEGER .sfpsCPResourcesTable.1.10 |
sfpsCPResourcesDuplicateNumber of packets that were duplicates of an existing call.ro INTEGER .sfpsCPResourcesTable.1.11 |
sfpsCPResourcesDiscoverOnlyNumber of packets that the switch only discovered information.ro INTEGER .sfpsCPResourcesTable.1.12 |
sfpsCPResourcesDiscoverErrorNumber of packets that the switch could not discover
information. Something was wrong with the packet.ro INTEGER .sfpsCPResourcesTable.1.13 |
sfpsCPResourcesResolveFailNumber of packets which caused the Resolve to fail. The fail
is due to no vlan information was returned.ro INTEGER .sfpsCPResourcesTable.1.14 |
sfpsCPResourcesResolveErrorNumber of packets which caused the Resolve to return an error.
An error could be caused by a bad packet.ro INTEGER .sfpsCPResourcesTable.1.15 |
sfpsCPResourcesPolicyFailNumber of packets which caused the Policy to fail. The fail
is caused because the switch has no information on the vlan(s)
returned by Resolve.ro INTEGER .sfpsCPResourcesTable.1.16 |
sfpsCPResourcesPolicyErrorNumber of packets which caused the Policy to return an error.
An error could be caused by a bad packet.ro INTEGER .sfpsCPResourcesTable.1.17 |
sfpsCPResourcesConnectFailNumber of packets that caused the Connect to fail.ro INTEGER .sfpsCPResourcesTable.1.18 |
sfpsCPResourcesConnectFloodNumber of packets that caused the Connect to flood.ro INTEGER .sfpsCPResourcesTable.1.19 |
sfpsCPResourcesConnectErrorNumber of packets that caused the Connect to return an error.ro INTEGER .sfpsCPResourcesTable.1.20 |
sfpsCPResourcesConfigTimeNumber of time ticks since the last configuration change.ro TimeTicks (SNMPv2-SMI) .sfpsCPResourcesTable.1.21 |
sfpsCPResourcesNeedFloodSet to enabled(1)/disabled(0) if the BaseNeedFlood attribute
is desired. If disabled, then an attempt to resolve is
performed.ro INTEGER .sfpsCPResourcesTable.1.22 |
sfpsCPResourcesNeedResolveSet to enabled(1)/disabled(0) if the Resoolve attribute
is desired.ro INTEGER .sfpsCPResourcesTable.1.23 |
sfpsCPResourcesNeedDiscoverSet to enabled(1)/disabled(0) if the Discover attribute
is desired.ro INTEGER .sfpsCPResourcesTable.1.24 |
sfpsCPResourcesDiscoverAllSet to enabled(1)/disabled(0) if the DiscoverAll attribute
is desired.ro INTEGER .sfpsCPResourcesTable.1.25 |
sfpsCPResourcesNeedProxyOutSet to enabled(1)/disabled(0) if the Proxy Forward attribute
is desired.ro INTEGER .sfpsCPResourcesTable.1.26 |
sfpsCPResourcesNeedProxyInSet to enabled(1)/disabled(0) if the Proxy Back attribute
is desired.ro INTEGER .sfpsCPResourcesTable.1.27 |
sfpsCPResourcesNeedFilterSet to enabled(1)/disabled(0) if the Filter attribute
is desired.ro INTEGER .sfpsCPResourcesTable.1.28 |
sfpsCPResourcesAcceptRateThe number of packets per second that have been sent to this
Call Processor to be handled and accepted for processing.ro INTEGER .sfpsCPResourcesTable.1.29 |
sfpsCPResourcesTotalRateThe number of packets per second that have been sent to this
Call Processor to be handled.ro INTEGER .sfpsCPResourcesTable.1.30 |
sfpsCPResourcesSingleFloodNumber of packets that were unicast (single) flooded.ro INTEGER .sfpsCPResourcesTable.1.34 |
sfpsCPResourcesNeedValidNetNumber of packets that were unicast (single) flooded.ro INTEGER .sfpsCPResourcesTable.1.35 |
sfpsCPResourcesInvalidNetDropsro INTEGER .sfpsCPResourcesTable.1.36 |
sfpsCPResourcesPersistMaskro INTEGER .sfpsCPResourcesTable.1.37 |