CTRON-PRIORITY-EXTENSIONS-MIB
Detailed view of the defined objects, syntax rules, and hierarchical paths.
36
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
36 total| Object Name |
|---|
ctPriorityExtTxQueue OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.1.2.14.1 |
IMPORTS Unknown .1.3.6.1.4.1.52.4.1.2.14.1 |
ctPriorityExtTXQueueTableThis table provides information pertaining to the number
of physical transmit queues per interface. SEQUENCE OF CtPriorityExtTXQueueEntry .1.3.6.1.4.1.52.4.1.2.14.1.1 |
ctPriorityExtTXQueueEntrySpecifies the number of transmit queues for this interface. CtPriorityExtTXQueueEntry .1.3.6.1.4.1.52.4.1.2.14.1.1.1 |
ctPriorityExtSlotNumThe slot num of the device that the interface is located on.ro INTEGER .1.3.6.1.4.1.52.4.1.2.14.1.1.1.1 |
ctPriorityExtInterfaceNumThe interface number for which the information is requested.
This is equal to the MIB-II ifIndex.ro INTEGER .1.3.6.1.4.1.52.4.1.2.14.1.1.1.2 |
ctPriorityExtNumTXQueuesThe number of physical transmit queues for the requested interface.ro INTEGER .1.3.6.1.4.1.52.4.1.2.14.1.1.1.3 |
ctPriorityExtMACConfig OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.1.2.14.2 |
ctPriorityExtMACStatusDefines the status of the priority packet forwarding based
on MAC address. Setting ctIfPriorityExtMACStatus to a value of
disable(2), disables the forwarding of packets based on priority table
information. All information remains in existence but is not
considered in the forwarding decision.rw Enumeration .1.3.6.1.4.1.52.4.1.2.14.2.1 |
ctPriorityExtNumMACEntriesThe number of active entries in the ctPriorityExtMACTable.ro INTEGER .1.3.6.1.4.1.52.4.1.2.14.2.2 |
ctPriorityExtMaxNumMACEntriesThe maximum number of entries allowed in the ctPriorityExtMACTable.ro INTEGER .1.3.6.1.4.1.52.4.1.2.14.2.3 |
ctPriorityExtMaxNumPktTypesPerMACEntryThe maximum number of packet types that can be asssociated
with any one MAC address in the ctPriorityExtMACTablero INTEGER .1.3.6.1.4.1.52.4.1.2.14.2.4 |
ctPriorityExtMACTableThis table provides the ability to specify priority based
on the MAC addresses encoded in a packet. There are several
possible permutations achieveable via this table. Priorities
in this table may be based on the following criteria:
Destination address and specific packet type and VLAN ID
Destination address and specific packet type
Destination address
Source address and specific packet type and VLAN ID
Source address and specific packet type
Source address
Destination or source address and specific packet type and VLAN ID
Destination or source address and specific packet type
Destination or source address
Depending on the values set in the table which of these criteria
will be used for any given packet.
If any given relationship can not be created the set will fail with a
BAD-VALUE error. SEQUENCE OF CtPriorityExtMACEntry .1.3.6.1.4.1.52.4.1.2.14.2.5 |
ctPriorityExtMACEntryDescribes a particular MAC address priority entry. CtPriorityExtMACEntry .1.3.6.1.4.1.52.4.1.2.14.2.5.1 |
ctPriorityExtMACAddrThe MAC address which will have a priority associated with it
as specified by ctPriorityExtMACPriority.ro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.52.4.1.2.14.2.5.1.1 |
ctPriorityExtAddrTypeThe type of MAC address which will have priority associated
with it as specified by ctPriorityExtMACPriority.ro Enumeration .1.3.6.1.4.1.52.4.1.2.14.2.5.1.2 |
ctPriorityExtMACPktTypeThe packet type associated with a particular MAC address,
specified by ctPriorityExtMACAddr, which will have priority
associated with it as specified by ctPriorityExtMACPriority.
A value of 1 indicates that this entry pertains to all
packet types. A single value in the range of 0x0600..0xFFFF
indicates that this entry only pertains to that particular packet
type.ro INTEGER .1.3.6.1.4.1.52.4.1.2.14.2.5.1.3 |
ctPriorityExtMACVlanIdA set of 65335 (0xFFFF) causes the priority value specified in
ctPriorityExtMACPriority to apply to all packets
matching the criteria specified by ctPriorityExtMACAddr,
ctPriorityExtAddrType, and ctPriorityExtMACPktType. Any
value between 1 and 4095 is a valid VLAN ID (IEEE 802.1q)
and causes ctPriorityExtMACPriority to only apply
to packets that are of matching the above criteria and that are
members of the IEEE 802.1q VLAN specified by the value set.rw INTEGER .1.3.6.1.4.1.52.4.1.2.14.2.5.1.4 |
ctPriorityExtMACPriorityA set of delete(100) will delete this row from the
ctPriorityExtMACTable. A set of priority(1-8) will either
create a row in the ctPriorityExtMACTable with the specified
priority or modify an existing entry with the newly specified
priority.rw Enumeration .1.3.6.1.4.1.52.4.1.2.14.2.5.1.5 |
ctPriorityExtPktTypeConfig OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.1.2.14.3 |
ctPriorityExtPktTypeStatusDefines the status of the priority packet forwarding based
exclusively on packet type. Setting ctIfPriorityPktTypeExtStatus
to a value of disable(2) disables the forwarding of packets
based on priority table information. All information remains
in existence but is not considered in the forwarding decision.rw Enumeration .1.3.6.1.4.1.52.4.1.2.14.3.1 |
ctPriorityExtNumPktTypeEntriesThe number of active entries in the ctPriorityExtPktTypeTable.ro INTEGER .1.3.6.1.4.1.52.4.1.2.14.3.2 |
ctPriorityExtMaxNumPktTypeEntriesThe maximum number of entries allowed in the
ctPriorityExtPktTypeTable.ro INTEGER .1.3.6.1.4.1.52.4.1.2.14.3.3 |
ctPriorityExtPktTypeTableThis table provides the ability to specify priority based
on the packet type encoded in a packet. Priorities
in this table may be based on the following criteria:
Packet type and VLAN ID
Packet type
If any given relationship can not be created the set will fail with a
BAD-VALUE error. SEQUENCE OF CtPriorityExtPktTypeEntry .1.3.6.1.4.1.52.4.1.2.14.3.4 |
ctPriorityExtPktTypeEntryDescribes a particular packet type priority entry. CtPriorityExtPktTypeEntry .1.3.6.1.4.1.52.4.1.2.14.3.4.1 |
ctPriorityExtPktTypeThe packet type which will have priority associated with
it as specified by ctPriorityExtPktTypePriority.
A value of 1 indicates that this entry pertains to all
packet types. A single value in the range of 0x0600..0xFFFF
indicates that this entry only pertains to that particular packet
type.ro INTEGER .1.3.6.1.4.1.52.4.1.2.14.3.4.1.1 |
ctPriorityExtPktTypeVlanIdA set of 65535 (0xFFFF) causes the priority value specified in
ctPriorityExtPktTypePriority to apply to all packets
of the type specified by ctPriorityExtPktType. Any
value between 1 and 4095 is a valid VLAN ID (IEEE 802.1q)
and causes ctPriorityExtPktTypePriority to only apply
to packets that are of ctPriorityExtPktType type and are
members of the IEEE 802.1q VLAN specified by the value set.rw INTEGER .1.3.6.1.4.1.52.4.1.2.14.3.4.1.2 |
ctPriorityExtPktTypePriorityA set of delete(100) will delete this row from the
ctPriorityExtPriorityTypeTable. A set of priority(1-8) will either
create a row in the ctPriorityExtPriorityTypeTable with the specified
priority or modify an existing entry with the newly specified
priority.rw Enumeration .1.3.6.1.4.1.52.4.1.2.14.3.4.1.3 |
ctPriorityExtPortConfig OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.1.2.14.4 |
ctPriorityExtPortStatusDefines the status of the priority packet forwarding based
on receive port. Setting ctIfPriorityExtPortStatus to a value of
disable(2), disables the forwarding of packets based on priority table
information. All information remains in existence but is not
considered in the forwarding decision.rw Enumeration .1.3.6.1.4.1.52.4.1.2.14.4.1 |
ctPriorityExtPortTableThis table provides information pertaining to the priority associated
with a receive port. SEQUENCE OF CtPriorityExtPortEntry .1.3.6.1.4.1.52.4.1.2.14.4.2 |
ctPriorityExtPortEntrySpecifies the priority associated with a specific physical
interface. CtPriorityExtPortEntry .1.3.6.1.4.1.52.4.1.2.14.4.2.1 |
ctPriorityExtPortSlotNumThe slot num of the device that the interface is located on.ro INTEGER .1.3.6.1.4.1.52.4.1.2.14.4.2.1.1 |
ctPriorityExtPortInterfaceNumThe interface number for which the information is requested.ro INTEGER .1.3.6.1.4.1.52.4.1.2.14.4.2.1.2 |
ctPriorityExtPortPriorityA set of priority(1-8) will modify an existing entry
with the newly specified priority. Entries cannot be
deleted from this table.rw Enumeration .1.3.6.1.4.1.52.4.1.2.14.4.2.1.3 |
ctPriorityExtFwdInboundPriorityThis controls whether a packet that is received with a priority tag
is forwarded with the priority encoded in the tag or the default
priority of the port. A value of enable(1) means the packet will
be forwarded with the priority encoded in the tag. A value of
disable(2) means the packet will be given the default priority
of the port it was received on.rw Enumeration .1.3.6.1.4.1.52.4.1.2.14.4.2.1.4 |