CTRON-FRONTPANEL-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for CTRON-FRONTPANEL-MIB.
14
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
14 total| Object Name |
|---|
ctFpRedund OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.1.5.5.1 |
CTRON-MIB-NAMES Unknown .1.3.6.1.4.1.52.4.1.5.5.1 |
ctFpRedundResetIf this object is set to Reset it will cause a reset
of the front panel redundancy. Setting this object to
NoReset will do nothing. This object will always be
read as NoReset.rw Enumeration .1.3.6.1.4.1.52.4.1.5.5.1.1 |
ctFpRedundPollIntervalGet/Set the number of seconds between polls for front
panel redundancy.rw INTEGER .1.3.6.1.4.1.52.4.1.5.5.1.2 |
ctFpRedundRetrysGet/Set the the number of unanswered polls allowed for
the front panel redundancy before it switches ports.rw INTEGER .1.3.6.1.4.1.52.4.1.5.5.1.3 |
ctFpRedundNumAddrGet the number of IP Addresses associated with front panel
redundancy.ro INTEGER .1.3.6.1.4.1.52.4.1.5.5.1.4 |
ctFpRedundAddAddrAdd an IP Address to the polling list for the front panel
redundancy.rw NetworkAddress .1.3.6.1.4.1.52.4.1.5.5.1.5 |
ctFpRedundDelAddrDelete an IP Address from the polling list for the
front panel redundancy.rw NetworkAddress .1.3.6.1.4.1.52.4.1.5.5.1.6 |
ctFpRedundActivePortGet/Set the front panel port you want to be active
when front panel redundancy is enabled.rw INTEGER .1.3.6.1.4.1.52.4.1.5.5.1.7 |
ctFpRedundEnableIf this object is set to enable, the front panel
redundancy will be activated. If this object is set
to disable, the front panel redundancy will be
deactivated. When read, this object will returns the
state of the object based on the last request
made.rw Enumeration .1.3.6.1.4.1.52.4.1.5.5.1.8 |
ctFpRedundAddrTable SEQUENCE OF CtFpRedundAddrEntry .1.3.6.1.4.1.52.4.1.5.5.1.9 |
ctFpRedundAddrEntry CtFpRedundAddrEntry .1.3.6.1.4.1.52.4.1.5.5.1.9.1 |
ctFpRedundAddrIdA unique value identifying an element in a sequence of
member IP Addresses which belong to the front panel
redundancy. This value goes from 1 to the maximum
number of IP Addresses which may be included in
front panel redundancy.ro INTEGER .1.3.6.1.4.1.52.4.1.5.5.1.9.1.1 |
ctFpRedundAddrIPAddrReturns an IP Address associated with the front panel
redundancy.ro NetworkAddress .1.3.6.1.4.1.52.4.1.5.5.1.9.1.2 |
More MIBs from Cabletron
Browse all CabletronMIBs →CTRON-OIDS
SNMP MIB module
1129 objects→
CTRON-SFCS-MIB
Standard SNMP MIB module defining data structures for CTRON-SFCS-MIB.
490 objects→
CABLETRON-TRAPS
Standard SNMP MIB module defining data structures for CABLETRON-TRAPS.
446 objects→
CTRON-IPX-ROUTER-MIB
SNMP MIB module
435 objects→
ADIC-SANMGR-PROXY-MIB
Standard SNMP MIB module defining data structures for ADIC-SANMGR-PROXY-MIB.
418 objects→
CTRON-AP3000-MIB
The CTRON-AP3000-MIB module enables read-write SNMP configuration management for Enterasys AP3000 wireless access points under the Enterasys enterprise OID. It provides programmatic access to device-specific operational parameters and settings required for provisioning and maintaining the AP3000 hardware.
361 objects→