CTRON-ETWMIM-MIB
Detailed view of the defined objects, syntax rules, and hierarchical paths.
9
Objects
Active
Status
2
Dependencies
Imported Objects
Objects
9 total| Object Name |
|---|
IMPORTSDenotes whether a T1 daughter board is attached to the
Etwmim card being managedro Enumeration .1.3.6.1.4.1.52.4.1.1.4.1.1 |
etwDbEnabledThis object exists if etwDbExist is 1. Setting
this object to 1 will cause the WAN port to use the
daughterboard T1 port. Setting this object to 2
will cause the WAN port to use the synchronous portrw Enumeration .1.3.6.1.4.1.52.4.1.1.4.1.2 |
etwDbFracToggleThis object exists if etwDbExist is 1. Setting this
object to 1 will cause the T1 fractional table to be
updated with the new values, as entered. Setting this
object to 2, will cause the T1 fractional table to be
the table as it is being entered. Setting this object
to 3, will cause the T1 fractional table to be the
table that is currently in use, regardless of any
changes being entered. Setting this object to 4, will
cause any changes that have been made to the fractional
table since the last update-table to be deleted.rw Enumeration .1.3.6.1.4.1.52.4.1.1.4.1.3 |
etwFWRevDenotes the revision of firmware in the module.
The format of the string is xx.xx.xx, where the first
pair indicates version, and the second pair indicates
revision.ro OCTET STRING .1.3.6.1.4.1.52.4.1.1.4.1.4 |
etwHWRevDenotes the revision of hardware.ro INTEGER .1.3.6.1.4.1.52.4.1.1.4.1.5 |
etwEpimEnabledThis object gives the status of the EPIM port on the
etwmim. A value of 1 indicates that the hardware has
been set to use the Epim port for the ethernet
connection. A value of 2 indicates that the hardware
has been set to use the A channel for the ethernet
connectionro Enumeration .1.3.6.1.4.1.52.4.1.1.4.1.6 |
etwEpimTypeIdentifies the type of EPIM that is present in the
EPIM slot. The value is allocated in the Ctron naming
tree.ro OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.1.1.4.1.7 |
etwEpimLinkThis object will indicate whether a link is
established on the EPIM link. A value of 1 indicates
that a link is established. A value of 2 indicates that
a link is not established. A value of 3 indicates that
the status of the link is unknown or not valid for the
type of Epim installed.ro Enumeration .1.3.6.1.4.1.52.4.1.1.4.1.8 |
etwClearNvramOnBootWhen set to a 1, the system will clear all persistant
objects, except for the download objects, from nvram
on the next system bootrw INTEGER .1.3.6.1.4.1.52.4.1.1.4.1.9 |
More MIBs from Cabletron
Browse all CabletronMIBs →CTRON-OIDS
SNMP MIB module
1129 objects→
CTRON-SFCS-MIB
Standard SNMP MIB module defining data structures for CTRON-SFCS-MIB.
490 objects→
CABLETRON-TRAPS
Standard SNMP MIB module defining data structures for CABLETRON-TRAPS.
446 objects→
CTRON-IPX-ROUTER-MIB
SNMP MIB module
435 objects→
ADIC-SANMGR-PROXY-MIB
Standard SNMP MIB module defining data structures for ADIC-SANMGR-PROXY-MIB.
418 objects→
CTRON-AP3000-MIB
The CTRON-AP3000-MIB module enables read-write SNMP configuration management for Enterasys AP3000 wireless access points under the Enterasys enterprise OID. It provides programmatic access to device-specific operational parameters and settings required for provisioning and maintaining the AP3000 hardware.
361 objects→