CTRON-ENVIRONMENT-MIB
Detailed view of the defined objects, syntax rules, and hierarchical paths.
49
Objects
Active
Status
2
Dependencies
Imported Objects
Objects
49 total| Object Name |
|---|
chEnv OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.1.1.8.1 |
CTRON-MIB-NAMES Unknown .1.3.6.1.4.1.52.4.1.1.8.1 |
chEnvAmbientTempThe ambient temperature of the room in which the chassis
is located. If this sensor is broken or not supported, then
this object will be set to zero. The value of this object
is the actual temperature in degrees Fahrenheit * 10.ro INTEGER .1.3.6.1.4.1.52.4.1.1.8.1.1 |
chEnvAmbientStatusThis object reflects the status of the ambient temperature
reading.ro Enumeration .1.3.6.1.4.1.52.4.1.1.8.1.2 |
chEnvHumidityThe humidity value of the air flowing thru the chassis.
The value of this object is the actual humidity * 10.ro INTEGER .1.3.6.1.4.1.52.4.1.1.8.1.3 |
chEnvHumidityStatusThis object reflects the status of the ambient humidity
reading.ro Enumeration .1.3.6.1.4.1.52.4.1.1.8.1.4 |
chEnvAmbientHotThe temperature value above which the ambient temperature
is deemed to be hot.ro INTEGER .1.3.6.1.4.1.52.4.1.1.8.1.5 |
chEnvAmbientWarmThe temperature value above which the ambient temperature
is deemed to be warm, if it is below or equal the hot
value.ro INTEGER .1.3.6.1.4.1.52.4.1.1.8.1.6 |
chEnvAmbientCoolThe temperature value below which the ambient temperature
is deemed to be cool, if it is above or equal the cold
value.ro INTEGER .1.3.6.1.4.1.52.4.1.1.8.1.7 |
chEnvAmbientColdThe temperature value below which the ambient temperature
is deemed to be cold.ro INTEGER .1.3.6.1.4.1.52.4.1.1.8.1.8 |
chEnvHumidityMoistThe humidity value above which the chassis humidity
is deemed to be moist.ro INTEGER .1.3.6.1.4.1.52.4.1.1.8.1.9 |
chEnvHumidityDryThe humidity value below which the chassis humidity
is deemed to be a static risk.ro INTEGER .1.3.6.1.4.1.52.4.1.1.8.1.10 |
chEnvNumFansNumber of fans in a chassis.ro INTEGER .1.3.6.1.4.1.52.4.1.1.8.1.11 |
chEnvFanTableA list of fans installed in this chassis. SEQUENCE OF ChEnvFanEntry .1.3.6.1.4.1.52.4.1.1.8.1.12 |
chEnvFanEntryA slot entry containing objects for a particular
module. ChEnvFanEntry .1.3.6.1.4.1.52.4.1.1.8.1.12.1 |
chEnvFanIDA unique value, in the range between 1 and and the
value of chEnvNumFans.ro INTEGER .1.3.6.1.4.1.52.4.1.1.8.1.12.1.1 |
chEnvFanStatusThis object reflects the status of the chassis fan.ro Enumeration .1.3.6.1.4.1.52.4.1.1.8.1.12.1.2 |
chEnvFanAdminThis object is used to select the operational mode of the
fan. If the value is set to 1 (auto) then fan speed is
based on temperature. If the value is set to 3 (testing)
then value will return to it's previous value prior to
being set at 3.rw Enumeration .1.3.6.1.4.1.52.4.1.1.8.1.12.1.3 |
chEnvFanSpeedThe fan speed expressed as a percentage of the maximum
fan speed.ro INTEGER .1.3.6.1.4.1.52.4.1.1.8.1.12.1.4 |
boardEnv OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.1.1.8.2 |
boardEnvSlotTableA list of networking modules installed in this chassis. SEQUENCE OF BoardEnvSlotEntry .1.3.6.1.4.1.52.4.1.1.8.2.1 |
boardEnvSlotEntryA slot entry containing objects for a particular
module. BoardEnvSlotEntry .1.3.6.1.4.1.52.4.1.1.8.2.1.1 |
boardEnvSlotIDThe slot number of a chassis slot in which this board is
installed. This object is similiar to chSlotID in the
Chassis MIB.ro INTEGER .1.3.6.1.4.1.52.4.1.1.8.2.1.1.1 |
boardEnvTempThe temperature of the networking board. If this sensor is
broken or not supported, then this object will be set to
zero. The temperature is in degrees Fahrenheit * 10.ro INTEGER .1.3.6.1.4.1.52.4.1.1.8.2.1.1.2 |
boardEnvTempStatusThis object reflects the status of the board temperature
reading.ro Enumeration .1.3.6.1.4.1.52.4.1.1.8.2.1.1.3 |
boardEnvTempRelStatusThis object reflects the status of the board temperature
reading relative to the ambient temperature.ro Enumeration .1.3.6.1.4.1.52.4.1.1.8.2.1.1.4 |
boardEnvShutdownAdminThis object enables or disables the auto shutdown due
to a temperature condition.rw Enumeration .1.3.6.1.4.1.52.4.1.1.8.2.1.1.5 |
boardEnvTempHotThe temperature value above which the board temperature
is deemed to be hot.ro INTEGER .1.3.6.1.4.1.52.4.1.1.8.2.1.1.6 |
boardEnvTempWarmThe temperature value above which the board temperature
is deemed to be warm, if it is below or equal the hot
value.ro INTEGER .1.3.6.1.4.1.52.4.1.1.8.2.1.1.7 |
boardEnvTempCoolThe temperature value below which the board temperature
is deemed to be cool, if it is above or equal the cold
value.ro INTEGER .1.3.6.1.4.1.52.4.1.1.8.2.1.1.8 |
boardEnvTempColdThe temperature value below which the board temperature
is deemed to be cold.ro INTEGER .1.3.6.1.4.1.52.4.1.1.8.2.1.1.9 |
boardEnvTempRelHotThe temperature value above ambient at which the board
temperature is deemed to be hot relative to ambient.ro INTEGER .1.3.6.1.4.1.52.4.1.1.8.2.1.1.10 |
boardEnvTempRelWarmThe temperature value above ambient at which the board
temperature is deemed to be warm relative to ambient, if
it is below the relative hot value of boardEnvTempRelHot.ro INTEGER .1.3.6.1.4.1.52.4.1.1.8.2.1.1.11 |
boardEnvTempMaxFanRelHotThe temperature value above ambient at which the board
temperature is deemed to be hot relative to ambient, with
all fans in the chassis running at there maximum speed.ro INTEGER .1.3.6.1.4.1.52.4.1.1.8.2.1.1.12 |
boardEnvTempMaxFanRelWarmThe temperature value above ambient at which the board
temperature is deemed to be warm relative to ambient, if
it is below the relative hot value of boardEnvTempMaxFanRelHot,
with all fans in the chassis running at there maximum speed.ro INTEGER .1.3.6.1.4.1.52.4.1.1.8.2.1.1.13 |
psEnv OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.1.1.8.3 |
psEnvSlotTableA list of networking modules installed in this chassis. SEQUENCE OF PsEnvSlotEntry .1.3.6.1.4.1.52.4.1.1.8.3.1 |
psEnvSlotEntryA slot entry containing objects for a particular
module. PsEnvSlotEntry .1.3.6.1.4.1.52.4.1.1.8.3.1.1 |
psEnvSlotIDThe slot number of a chassis slot in which this power supply
is installed. An unique value, in the range between 1 and
and the value of chNumSlots. This object is similiar to
chSlotID in the Chassis MIB.ro INTEGER .1.3.6.1.4.1.52.4.1.1.8.3.1.1.1 |
psEnvTempThe temperature of the power supply. If this sensor is
broken or not supported, then this object will be set to
zero. The temperature is in degrees Fahrenheit * 10.ro INTEGER .1.3.6.1.4.1.52.4.1.1.8.3.1.1.2 |
psEnvTempStatusThis object reflects the status of the power supply
temperature reading.ro Enumeration .1.3.6.1.4.1.52.4.1.1.8.3.1.1.3 |
psEnvTempHotThe temperature value above which the power supply
temperature is deemed to be hot.ro INTEGER .1.3.6.1.4.1.52.4.1.1.8.3.1.1.4 |
psEnvTempWarmThe temperature value above which the power supply
temperature is deemed to be warm, if it is below or
equal the hot value.ro INTEGER .1.3.6.1.4.1.52.4.1.1.8.3.1.1.5 |
psEnvTempCoolThe temperature value below which the power supply
temperature is deemed to be cool, if it is above or
equal the cold value.ro INTEGER .1.3.6.1.4.1.52.4.1.1.8.3.1.1.6 |
psEnvTempColdThe temperature value below which the power supply
temperature is deemed to be cold.ro INTEGER .1.3.6.1.4.1.52.4.1.1.8.3.1.1.7 |
psEnvFanStatusThis object reflects the status of the chassis fan.ro Enumeration .1.3.6.1.4.1.52.4.1.1.8.3.1.1.8 |
psEnvFanAdminThis object is used to select the operational mode of the
fan. If the value is set to 1 (auto) then fan speed is
based on temperature. If the value is set to 3 (testing)
then value will return to it's previous value prior to
being set at 3.rw Enumeration .1.3.6.1.4.1.52.4.1.1.8.3.1.1.9 |
psEnvFanSpeedThe fan speed expressed as a percentage of the maximum
fan speed.ro INTEGER .1.3.6.1.4.1.52.4.1.1.8.3.1.1.10 |
bbuEnv OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.1.1.8.4 |