CTRON-CHASSIS-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for CTRON-CHASSIS-MIB.
17
Objects
Active
Status
2
Dependencies
Imported Objects
Objects
17 total| Object Name |
|---|
ctChas OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.3.1.1 |
CTRON-MIB-NAMES Unknown .1.3.6.1.4.1.52.4.3.1.1 |
ctChasFNBDenotes the presence or absence of the FNB.ro Enumeration .1.3.6.1.4.1.52.4.3.1.1.1 |
ctChasAlarmEnaAllow an audible alarm to be either enabled or dis-
abled. Setting this object to disable(1) will prevent an
audible alarm from being heard and will also stop the
sound from a current audible alarm. Setting this object
to enable(2) will allow an audible alarm to be heard and
will also enable the sound from a current audible alarm,
if it has previously been disabled. This object will read
with the current setting.rw Enumeration .1.3.6.1.4.1.52.4.3.1.1.2 |
chassisAlarmStateDenotes the current condition of the power supply
fault detection circuit. This object will read with
the value of chassisNoFaultCondition(1) when the chassis
is currently operating with no power faults detected.
This object will read with the value of
chassisFaultCondition(2) when the chassis is currently in
a power fault condition.ro Enumeration .1.3.6.1.4.1.52.4.3.1.1.3 |
ctEnviron OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.3.1.2 |
ctChasPowerTableA list of power supply entries. SEQUENCE OF CtChasPowerEntry .1.3.6.1.4.1.52.4.3.1.2.1 |
ctChasPowerEntryAn entry in the powerTable providing objects for a
power supply. CtChasPowerEntry .1.3.6.1.4.1.52.4.3.1.2.1.1 |
ctChasPowerSupplyNumDenotes the power supply.ro INTEGER .1.3.6.1.4.1.52.4.3.1.2.1.1.1 |
ctChasPowerSupplyStateDenotes the power supply's state.ro Enumeration .1.3.6.1.4.1.52.4.3.1.2.1.1.2 |
ctChasPowerSupplyTypeDenotes the power supply type.ro Enumeration .1.3.6.1.4.1.52.4.3.1.2.1.1.3 |
ctChasPowerSupplyRedundancyDenotes whether or not the power supply is redundant.ro Enumeration .1.3.6.1.4.1.52.4.3.1.2.1.1.4 |
ctFanModule OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.3.1.3 |
ctChasFanModuleTableA list of fan module entries. SEQUENCE OF CtChasFanModuleEntry .1.3.6.1.4.1.52.4.3.1.3.1 |
ctChasFanModuleEntryAn entry in the fan module Table providing objects for a
fan module. CtChasFanModuleEntry .1.3.6.1.4.1.52.4.3.1.3.1.1 |
ctChasFanModuleNumDenotes the Fan module that may have failed.ro INTEGER .1.3.6.1.4.1.52.4.3.1.3.1.1.1 |
ctChasFanModuleStateDenotes the fan modules state.ro Enumeration .1.3.6.1.4.1.52.4.3.1.3.1.1.2 |
More MIBs from Cabletron
Browse all CabletronMIBs →CTRON-OIDS
SNMP MIB module
1129 objects→
CTRON-SFCS-MIB
Standard SNMP MIB module defining data structures for CTRON-SFCS-MIB.
490 objects→
CABLETRON-TRAPS
Standard SNMP MIB module defining data structures for CABLETRON-TRAPS.
446 objects→
CTRON-IPX-ROUTER-MIB
SNMP MIB module
435 objects→
ADIC-SANMGR-PROXY-MIB
Standard SNMP MIB module defining data structures for ADIC-SANMGR-PROXY-MIB.
418 objects→
CTRON-AP3000-MIB
The CTRON-AP3000-MIB module enables read-write SNMP configuration management for Enterasys AP3000 wireless access points under the Enterasys enterprise OID. It provides programmatic access to device-specific operational parameters and settings required for provisioning and maintaining the AP3000 hardware.
361 objects→