CTRON-BRDG-MIB
Detailed view of the defined objects, syntax rules, and hierarchical paths.
53
Objects
Active
Status
2
Dependencies
Imported Objects
Objects
53 total| Object Name |
|---|
cabletron OBJECT IDENTIFIER .1.3.6.1.4.1.52 |
IMPORTS Unknown .1.3.6.1.4.1.52 |
mibs OBJECT IDENTIFIER .1.3.6.1.4.1.52.4 |
ctron OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.1 |
ctdatalink OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.1.2 |
ctBridge OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.1.2.3 |
ctBridgeSr OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.1.2.3.3 |
ctBridgeSrPortPairTableA table containing information of source and
destination port pairs for source routing SEQUENCE OF CtBridgeSrPortPairEntry .1.3.6.1.4.1.52.4.1.2.3.3.1 |
ctBridgeSrPortPairEntryAn entry consisting of objects specifying information
for the source and destination port pairs used for source
routing. CtBridgeSrPortPairEntry .1.3.6.1.4.1.52.4.1.2.3.3.1.1 |
ctBridgeSrPortPairSrcPortThe source port (ie the port which received the packets)
for which this entry has source routing information.ro INTEGER .1.3.6.1.4.1.52.4.1.2.3.3.1.1.1 |
ctBridgeSrPortPairDestPortThe destination port (ie the port which transmitted the
packets) for which this entry has source routing information.ro INTEGER .1.3.6.1.4.1.52.4.1.2.3.3.1.1.2 |
ctBridgeSrPortPairPacketsThe number of packets forward by the source route bridge
from the SrcPort to the DestPort.ro Counter .1.3.6.1.4.1.52.4.1.2.3.3.1.1.3 |
ctBridgeSrPortPairStateThe state of source route bridging on this port pair.
This is the desired state of the administrator. The
operational state of the port pair is determined by this
state along with the states of dot1dStpPortState within
the IETF Bridge MIB and ifOperStatus of the IETF MIB II
for each port.rw Enumeration .1.3.6.1.4.1.52.4.1.2.3.3.1.1.4 |
ctBridgeTp OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.1.2.3.4 |
ctBridgeTpPortFwdTableA table containing information of source and
destination port transparent MAC layer forwarding. SEQUENCE OF CtBridgeTpPortFwdEntry .1.3.6.1.4.1.52.4.1.2.3.4.1 |
ctBridgeTpPortFwdEntryAn entry consisting of objects specifying the source and
destination port transparent MAC layer forwarding
information. CtBridgeTpPortFwdEntry .1.3.6.1.4.1.52.4.1.2.3.4.1.1 |
ctBridgeTpPortFwdSrcPortThe source port (ie the port which received the packets)
for which this entry has transparent bridge forwarding
information.ro INTEGER .1.3.6.1.4.1.52.4.1.2.3.4.1.1.1 |
ctBridgeTpPortFwdDestPortThe destination port (ie the port which the packets
were transmitted out) for which this entry has
transparent bridge forwarding information.ro INTEGER .1.3.6.1.4.1.52.4.1.2.3.4.1.1.2 |
ctBridgeTpPortFwdPacketsThe number of packets transparently forwarded by the bridge
from the SrcPort to the DestPort.ro Counter .1.3.6.1.4.1.52.4.1.2.3.4.1.1.3 |
ctBridgeTpPortStateTableA table which allows the network administrator to enable/
disable transparent bridging on a particular port. SEQUENCE OF CtBridgeTpPortStateEntry .1.3.6.1.4.1.52.4.1.2.3.4.2 |
ctBridgeTpPortStateEntryAn entry containing the transparent bridge state of
a particular port. CtBridgeTpPortStateEntry .1.3.6.1.4.1.52.4.1.2.3.4.2.1 |
ctBridgeTpPortStatePortThe port for which this entry has transparent bridge
state information.ro INTEGER .1.3.6.1.4.1.52.4.1.2.3.4.2.1.1 |
ctBridgeTpPortStateThe state of transparent bridging on this port. This is
the desired state of the administrator. The operational
state of the port is determined by this state along with
the state of dot1dStpPortState within the IETF Bridge MIB
and ifOperStatus of the IETF MIB II.rw Enumeration .1.3.6.1.4.1.52.4.1.2.3.4.2.1.2 |
ctBridgeSdbEnet OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.1.2.3.5 |
ctBridgeSdbEnetTotFtrsThe total number of Ethernet filters in the special
database.ro INTEGER .1.3.6.1.4.1.52.4.1.2.3.5.1 |
ctBridgeSdbEnetNoMatchThe process to be performed if no match is found
in the Ethernet special database. The process of
filtering or forwarding is for all ports. searchFDB
results in searching the IEEE 802.1D transparent filter
database referenced by the IETF Bridge MIB.rw Enumeration .1.3.6.1.4.1.52.4.1.2.3.5.2 |
ctBridgeSdbEnetTableA table containing filtering information configured into
the bridge by (local or network) management specifying
the specific packet string (destination address, source
address, type/length field as well as a window of 64 bytes
of packet data beginning at a data offset) to be used
for filtering decisions. The filters are to be searched in
the order of incrementing filter number. SEQUENCE OF CtBridgeSdbEnetEntry .1.3.6.1.4.1.52.4.1.2.3.5.3 |
ctBridgeSdbEnetEntryFiltering information which extends the filtering
capability of IEEE 802.1d. CtBridgeSdbEnetEntry .1.3.6.1.4.1.52.4.1.2.3.5.3.1 |
ctBridgeSdbEnetFtrNoThe Filter number for which this entry contains
filtering information.ro INTEGER .1.3.6.1.4.1.52.4.1.2.3.5.3.1.1 |
ctBridgeSdbEnetStateThe state of the filter for which this entry contains
filtering information.rw Enumeration .1.3.6.1.4.1.52.4.1.2.3.5.3.1.2 |
ctBridgeSdbEnetFtrDataThe specific packet string representing the
destination address, source address, type/length
field and a window of 64 bytes of packet data
beginning at DataOffset to be used for filtering
decisions. Each ASCII character of the string
represents a nibble of packet data, therefore the
packet string should be (14+64) * 2 = 156 characters
long. A value of 'x' in the packet string is
used to indicate a 'Don't care' and no filtering is
to be performed on that nibble.rw OCTET STRING .1.3.6.1.4.1.52.4.1.2.3.5.3.1.3 |
ctBridgeSdbEnetDataOffsetThe offset into a packet from which the bridge begins
its filtering decisions on the 64 byte data window. The
value '0' indicates that the window begins at the first
byte after the Ethernet MAC header. The largest value of
DataOffset is 1514 - 14 - 63 = 1437.rw INTEGER .1.3.6.1.4.1.52.4.1.2.3.5.3.1.4 |
ctBridgeSdbEnetIOTableA table containing the set of ports to which
frames received from specific ports and containing the
specific packet string (destination address, source address,
type/length field as well as a window of 64 bytes of
packet data beginning at a data offset) of the corresponding
filter number of SdbEnetTable are allowed to be forwarded.
The value of '0' in this table as the RcvPort is used to
specify all ports which are not already specified in this
table for a particular entry. SEQUENCE OF CtBridgeSdbEnetIOEntry .1.3.6.1.4.1.52.4.1.2.3.5.4 |
ctBridgeSdbEnetIOEntryThe set of ports to which frames received by the RcvPort
and containing the specific packet string of the
corresponding filter number of SdbEnetTable are allowed
to be forwarded. CtBridgeSdbEnetIOEntry .1.3.6.1.4.1.52.4.1.2.3.5.4.1 |
ctBridgeSdbEnetIOFtrNoThe Filter number for which this entry contains
filtering information.rw INTEGER .1.3.6.1.4.1.52.4.1.2.3.5.4.1.1 |
ctBridgeSdbEnetIORcvPortEither the value '0', or the port number of the port
from which a frame must be received in order for this
entry's filtering information to apply. A value of
'0' indicates that this entry applies on all ports of
the bridge for which there is no other applicable entry.rw INTEGER .1.3.6.1.4.1.52.4.1.2.3.5.4.1.2 |
ctBridgeSdbEnetIOAllowedToGoToThe set of ports to which frames received from a
specific port and containing the specific packet
string of the corresponding filter number are allowed
to be forwarded. Each octet within the value of this
object specifies a set of eight ports, with the first
octet specifying ports 1 through 8, the second octet
specifying ports 9 through 16, etc. Within each octet,
the most significant bit represents the lowest numbered
port, and the least significant bit represents the
highest numbered port. Thus, each port of the bridge is
represented by a single bit within the value of this
object. If that bit has a value of '1' then that port
is included in the set of ports; the port is not
included if its bit has a value of '0'. (Note that the
setting of the bit corresponding to the port from which
a frame is received is irrelevant.)rw INTEGER .1.3.6.1.4.1.52.4.1.2.3.5.4.1.3 |
ctBridgeSdbEnetIODelEntryWriting a '1' to this object deletes this entry from the
Ethernet special database. This object will always return
a '1' when read.rw Enumeration .1.3.6.1.4.1.52.4.1.2.3.5.4.1.4 |
ctBridgeSdbTr OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.1.2.3.6 |
ctBridgeSdbTrTotFtrsThe total number of Token Ring filters in the special
database.ro INTEGER .1.3.6.1.4.1.52.4.1.2.3.6.1 |
ctBridgeSdbTrNoMatchThe process to be performed if no match is found
in the Token Ring special database. The process of
filtering or forwarding is for all ports. searchFDB
results in searching the IEEE 802.1D transparent filter
database referenced by the IETF Bridge MIB.rw Enumeration .1.3.6.1.4.1.52.4.1.2.3.6.2 |
ctBridgeSdbTrTableA table containing filtering information configured into
the bridge by (local or network) management specifying
the specific packet string (AC, FC, destination address,
source address, as well as a window of 64 bytes of packet
data beginning at a data offset) to be used for filtering
decisions. The filters are to be searched in the order of
incrementing filter number. SEQUENCE OF CtBridgeSdbTrEntry .1.3.6.1.4.1.52.4.1.2.3.6.3 |
ctBridgeSdbTrEntryFiltering information which extends the filtering
capability of IEEE 802.1d. CtBridgeSdbTrEntry .1.3.6.1.4.1.52.4.1.2.3.6.3.1 |
ctBridgeSdbTrFtrNoThe Filter number for which this entry contains
filtering information.ro INTEGER .1.3.6.1.4.1.52.4.1.2.3.6.3.1.1 |
ctBridgeSdbTrStateThe state of the filter for which this entry contains
filtering information.rw Enumeration .1.3.6.1.4.1.52.4.1.2.3.6.3.1.2 |
ctBridgeSdbTrFtrDataThe specific packet string consisting of the AC, FC,
destination address, source address, and a window of
64 bytes of packet data beginning at DataOffset
to be used for filtering decisions. Each ASCII
character of the string represents a nibble of
packet data, therefore the packet string should be
(14+64) * 2 = 156 characters long. A value of 'x' in
the packet string is used to indicate a 'Don't care'
and no filtering is to be performed on that nibble.rw OCTET STRING .1.3.6.1.4.1.52.4.1.2.3.6.3.1.3 |
ctBridgeSdbTrDataOffsetThe offset into a packet from which the bridge begins
its filtering decisions on the 64 byte data window. The
value '0' indicates that the window begins at the first
byte after the Token Ring MAC header. The largest value of
DataOffset is 17800 - 14 - 63 = 17723.rw INTEGER .1.3.6.1.4.1.52.4.1.2.3.6.3.1.4 |
ctBridgeSdbTrIOTableA table containing the set of ports to which frames
received from specific ports and containing the specific
packet string (AC, FC, destination address, source address,
as well as a window of 64 bytes of packet data beginning
at a data offset) of the corresponding filter number of
SdbTrTable are allowed to be forwarded. The value of '0'
in this table as the RcvPort is used to specify all ports
which are not already specified in this table for a
particular entry. SEQUENCE OF CtBridgeSdbTrIOEntry .1.3.6.1.4.1.52.4.1.2.3.6.4 |
ctBridgeSdbTrIOEntryThe set of ports to which frames received by the RcvPort
and containing the specific packet string of the
corresponding filter number of SdbTrTable are allowed
to be forwarded. CtBridgeSdbTrIOEntry .1.3.6.1.4.1.52.4.1.2.3.6.4.1 |
ctBridgeSdbTrIOFtrNoThe Filter number for which this entry contains
filtering information.rw INTEGER .1.3.6.1.4.1.52.4.1.2.3.6.4.1.1 |
ctBridgeSdbTrIORcvPortEither the value '0', or the port number of the port
from which a frame must be received in order for this
entry's filtering information to apply. A value of
'0' indicates that this entry applies on all ports of
the bridge for which there is no other applicable entry.rw INTEGER .1.3.6.1.4.1.52.4.1.2.3.6.4.1.2 |
ctBridgeSdbTrIOAllowedToGoToThe set of ports to which frames received from a
specific port and containing the specific packet
string of the corresponding filter number are allowed
to be forwarded. Each octet within the value of this
object specifies a set of eight ports, with the first
octet specifying ports 1 through 8, the second octet
specifying ports 9 through 16, etc. Within each octet,
the most significant bit represents the lowest numbered
port, and the least significant bit represents the
highest numbered port. Thus, each port of the bridge is
represented by a single bit within the value of this
object. If that bit has a value of '1' then that port
is included in the set of ports; the port is not
included if its bit has a value of '0'. (Note that the
setting of the bit corresponding to the port from which
a frame is received is irrelevant.)rw INTEGER .1.3.6.1.4.1.52.4.1.2.3.6.4.1.3 |
ctBridgeSdbTrIODelEntryWriting a '1' to this object deletes this entry from the
Token Ring special database. This object will always return
a '1' when read.rw Enumeration .1.3.6.1.4.1.52.4.1.2.3.6.4.1.4 |