CTRON-AppleTalk-ROUTER-MIB
Detailed view of the defined objects, syntax rules, and hierarchical paths.
277
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
277 total| Object Name |
|---|
nwAtRouter OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.2.2.2.3.4 |
nwAtMibs OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.2.2.2.3.4.1 |
nwAtMibRevTextIndicates the current revision level of the Cabletron at
Routing Services MIB in textual format.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.52.4.2.2.2.3.4.1.1 |
nwAtComponents OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.2.2.2.3.4.2 |
nwAtSystem OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.2.2.2.3.4.2.1 |
nwAtSysConfig OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.2.2.2.3.4.2.1.1 |
nwAtSysRouterIdThe AppleTalk node address used to uniquely identify the
host (device) running the AppleTalk Routing Services. The
value of nwAtSysRouterId is equal to the highest AppleTalk
node address assigned to any router port.rw AtNetworkNumber .1.3.6.1.4.1.52.4.2.2.2.3.4.2.1.1.1 |
nwAtSysAdministration OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.2.2.2.3.4.2.1.2 |
nwAtSysAdminSTATUSSets the administrative state of AppleTalk Routing
Services system wide. Enabled (3) causes AppleTalk Routing
Services to become active on all router ports configured
and enabled for AppleTalk Routing Services. Disabled (2)
causes AppleTalk Routing Services to become inactive
system-wide.rw Enumeration .1.3.6.1.4.1.52.4.2.2.2.3.4.2.1.2.1 |
nwAtSysOperSTATUSIndicates the operating condition of AppleTalk Routing
Services system- wide. The value of nwAtSysOperStatus
indicates any problem with your AppleTalk Routing Services
configuration. A value of 6 indicates that regardless of
the value of nwAtSysAdminStatus, AppleTalk Routing
Services is not operating because of an invalid
configuration.ro Enumeration .1.3.6.1.4.1.52.4.2.2.2.3.4.2.1.2.2 |
nwAtSysAdminResetResets AppleTalk Routing Services system-wide. Reset (2)
forces a restart of AppleTalk Routing Services without a
graceful shutdown on any active router ports and without
affecting any other routing services.rw Enumeration .1.3.6.1.4.1.52.4.2.2.2.3.4.2.1.2.3 |
nwAtSysOperationalTimeIndicates the elapsed time, in hundredths of a second,
that nwAtSysOperStatus has been in its current state.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.52.4.2.2.2.3.4.2.1.2.4 |
nwAtSysVersionIndicates the current revision level of the AppleTalk
Routing Services firmware, in textual format.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.52.4.2.2.2.3.4.2.1.2.5 |
nwAtForwarding OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.2.2.2.3.4.2.2 |
nwAtFwdSystem OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.1 |
nwAtFwdCounters OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.1.1 |
nwAtFwdCtrAdminSTATUSSets the administrative state of the aggregate
(system-wide) AppleTalk packet and byte counters.
Enabled (3) causes these counters to become active.
Disabled (2) causes these counters to become inactive.rw Enumeration .1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.1.1.1 |
nwAtFwdCtrResetReset(2) resets the aggregate (system-wide) AppleTalk
packet and byte counters. Reset (2) resets the AppleTalk
aggregate counters to 0.nwAtFwdCtrOperationalTime is also
reset to 0.rw Enumeration .1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.1.1.2 |
nwAtFwdCtrOperationalTimeIndicates the elapsed time, in hundredths of a second,
that nwAtFwdCtrAdminStatus has been in the current state.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.1.1.3 |
nwAtFwdCtrInPktsIndicates the total number of AppleTalk packets that
have been received, system-wide, during
nwAtFwdCtrOperationalTime.ro Counter .1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.1.1.4 |
nwAtFwdCtrOutPktsIndicates the total number of AppleTalk packets that
have been transmitted, system-wide, during
nwAtFwdCtrOperationalTime.ro Counter .1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.1.1.5 |
nwAtFwdCtrFwdPktsIndicates the total number of AppleTalk packets that
have been forwarded, system-wide, during
nwAtFwdCtrOperationalTime.ro Counter .1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.1.1.6 |
nwAtFwdCtrFilteredPktsIndicates the total number of AppleTalk packets that
have been administratively filtered, system-wide, during
nwAtFwdCtrOperationalTime.ro Counter .1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.1.1.7 |
nwAtFwdCtrDiscardPktsIndicates the total number of AppleTalk packets that
have been discarded, system-wide, during
nwAtFwdCtrOperationalTime.ro Counter .1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.1.1.8 |
nwAtFwdCtrAddrErrPktsIndicates the total number of AppleTalk packets that
have been discarded, system-wide, during
nwAtFwdCtrOperationalTime because of addressing errors
in the AppleTalk header.ro Counter .1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.1.1.9 |
nwAtFwdCtrLenErrPktsIndicates the total number of AppleTalk packets that
have been discarded, system-wide, during
nwAtFwdCtrOperationalTime, because an invalid packet
length is contained in the AppleTalk header.ro Counter .1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.1.1.10 |
nwAtFwdCtrHdrErrPktsIndicates the total number of at packets that have been
discarded, device-wide, during nwAtFwdCtrOperationalTime,
because of an invalid at header.ro Counter .1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.1.1.11 |
nwAtFwdCtrInBytesIndicates the total number of bytes in the AppleTalk
packets that have been received, system-wide, during
nwAtFwdCtrOperationalTime.ro Counter .1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.1.1.12 |
nwAtFwdCtrOutBytesIndicates the total number of bytes in the AppleTalk
packets that have been transmitted, system-wide, during
nwAtFwdCtrOperationalTime.ro Counter .1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.1.1.13 |
nwAtFwdCtrFwdBytesIndicates the total number of bytes in the AppleTalk
packets that have been forwarded, system-wide, during
nwAtFwdCtrOperationalTime.ro Counter .1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.1.1.14 |
nwAtFwdCtrFilteredBytesIndicates the total number of bytes in the AppleTalk
packets that have been administratively filtered,
system-wide, during nwAtFwdCtrOperationalTime.ro Counter .1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.1.1.15 |
nwAtFwdCtrDiscardBytesIndicates the total number of bytes in the AppleTalk
packets that have been discarded, system wide, during
nwAtFwdCtrOperationalTime.ro Counter .1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.1.1.16 |
nwAtFwdCtrHostInPktsIndicates the total number of AppleTalk packets that
have been successfully delivered to the local host,
during nwAtFwdCtrOperationalTime.ro Counter .1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.1.1.17 |
nwAtFwdCtrHostOutPktsIndicates the total number of AppleTalk packets that
have been transmitted by the local host, during
nwAtFwdCtrOperationalTime.ro Counter .1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.1.1.18 |
nwAtFwdCtrHostDiscardPktsIndicates the total number of AppleTalk packets that
have been discarded by the local host, during
nwAtFwdCtrOperationalTiime, due to a lack of host
resources.ro Counter .1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.1.1.19 |
nwAtFwdCtrHostInBytesIndicates the total number of bytes in the AppleTalk
packets that have been received by the local host, during
nwAtFwdCtrOperationalTime.ro Counter .1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.1.1.20 |
nwAtFwdCtrHostOutBytesIndicates the total number of bytes in the AppleTalk
packets that have been transmitted by the local host,
during nwAtFwdCtrOperationalTime.ro Counter .1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.1.1.21 |
nwAtFwdCtrHostDiscardBytesIndicates the total number of bytes in the AppleTalk
packets that have been discarded by the local host,
during nwAtFwdCtrOperationalTime, due to a lack of host
resources.ro Counter .1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.1.1.22 |
nwAtFwdInterfaces OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2 |
nwAtFwdIfConfig OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.1 |
nwAtFwdIfTableThis table contains an entry for each router port.
This table is indexed by nwAtFwdIfIndex, which indicates
the value of MIB 2 ifindex, which identifies the router
port for which each entry exists. SEQUENCE OF NwAtFwdIfEntry .1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.1.1 |
nwAtFwdIfEntryEach entry specifies the AppeTalk Routing Services
configuration for the router port for which the entry
exists. NwAtFwdIfEntry .1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.1.1.1 |
nwAtFwdIfIndexIndicates the value of the MIB 2 ifIndex, which
identifies the router port for which the entry exists.ro INTEGER .1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.1.1.1.1 |
nwAtFwdIfAdminSTATUSSets the administrative state of AppleTalk Routing
Services on the router port for which the entry exists.
Enabled (3) causes AppleTalk Routing Services to become
active. Disabled (2) causes it to become inactive.rw Enumeration .1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.1.1.1.2 |
nwAtFwdIfOperSTATUSIndicates the current operating condition of AppleTalk
Routing Services on the AppleTalk router port for which
the entry exists. The value of nwAtFwdIfOperStatus
indicates any problem with the configuration of AppleTalk
Routing Services on the router port. A value of 6
indicates that regardless of the state of
nwAtFwdIfAdminStatus AppleTalk Routing Services is not
operating because of an invalid port-level configuration.ro Enumeration .1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.1.1.1.3 |
nwAtFwdIfOperationalTimeIndicates the elapsed time, in hundredths of a second,
that nwAtFwdIfOper Status has been in its current state.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.1.1.1.4 |
nwAtFwdIfControlThis object does not apply to this protocol. It is a
common object, inherited from the MIB framework used to
provide a common management interface to all the Cabletron
Routing Services protocol-specific MIBs. Setting this
object has no effect.rw Enumeration .1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.1.1.1.5 |
nwAtFwdIfMtuSpecifies the Maximum Transmissions Unit (MTU) for
AppleTalk packets on the router port for which the entry
exists. This includes the AppleTalk header and data, but
does not include framing.rw INTEGER .1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.1.1.1.6 |
nwAtFwdIfForwardingControls forwarding of AppleTalk packets on the
AppleTalk router port for which the entry exists.
Enabled (3) causes AppleTalk packets to be forwarded.
Disabled (2) prevents AppleTalk packets from being
forwarded.rw Enumeration .1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.1.1.1.7 |
nwAtFwdIfFrameTypeSpecifies the framing type for AppleTalk packets forwarded on the
router port for which the entry exists. Some frame types are only
valid for specific media types. The comments reflect those valid
media types.rw Enumeration .1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.1.1.1.8 |
nwAtFwdIfAclIdentifierSpecifies the Access Control ID of the access control
list in effect for AppleTalk packets being routed on
the router port for which the entry exists. A value of 0
indicates that no access control list is in effect.rw INTEGER .1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.1.1.1.9 |
nwAtFwdIfAclSTATUSControls the operation of any access control list
configured for AppleTalk traffic on the router port for
which the entry exists. Enabled (3) applies the access
control list indicated by the value of
nwAtFwdIfAclIdentifier to all AppleTalk traffic being
routed on the port. Disabled (2) prevents the access
control list from being applied.rw Enumeration .1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.1.1.1.10 |
nwAtFwdIfCacheControlControls AppleTalk Address caching on the router port
for which the entry exists. When AppleTalk Address
caching is enabled, AppleTalk Addresses used for address
validation, filtering, and forwarding are stored in the
cache. This cache is checked first before doing a full
route table lockup, which speeds up the switching process.
Enabled (3) turns on AppleTalk Address caching.
Disabled (2) turns it off.rw Enumeration .1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.1.1.1.11 |
nwAtFwdIfCacheEntriesIndicates the number of entries in the AppleTalk Address
cache on the router port for which the entry exists.ro Counter .1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.1.1.1.12 |
nwAtFwdIfCacheHitsIndicates the number of times entries in the AppleTalk
Address cache have been used to provide the AppleTalk
address required to validate, filter, or forward an
AppleTalk packet on the router port.ro Counter .1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.1.1.1.13 |
nwAtFwdIfCacheMissesIndicates the number of times the AppleTalk Address
required to validate, filter, or forward an AppleTalk
packet on the router port was not found in the AppleTalk
Address cache.ro Counter .1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.1.1.1.14 |
nwAtportTableThis table contains an entry for each router port
configured for AppleTalk Routing Services. SEQUENCE OF NwAtportEntry .1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.1.2 |
nwAtportEntryEach entry specifies the AppleTalk address information
for the router port for which the entry exists. NwAtportEntry .1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.1.2.1 |
nwAtportIndexIndicates a unique value for each router port. The value
of nwAtportIndex is an integer between 1 and the total
number of ports configured for AppleTalk Routing
Services.ro INTEGER .1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.1.2.1.1 |
nwAtportDescrThis text string provides a description of the port to
the end-user; it must not contain anything but printable
ASCII characters.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.1.2.1.2 |
nwAtportTypeThe value of nwArPortType indicates which link-layer
protocol is running immediately below DDP in the protocol
stack on the router port for which the entry exists. The
value of nwAtPortType determines the format of address
octet stings throughout the entire AppleTalk MIB.rw Enumeration .1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.1.2.1.3 |
nwAtportNetStartThe first AppleTalk network address in the network range
configured for the port. If the port is not a native
AppleTalk port, this object will have the value of two
octets of zero. Set this value to the first network
address in the network range configured for the port.rw AtNetworkNumber .1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.1.2.1.4 |
nwAtportNetEndThe last AppleTalk network address in the network range
configured for the port. If the network to which this
AppleTalk port is connected is a non-extended network, or
if it is not a native AppleTalk port, the value for
nwAtportNetEnd will be two octets of zero. Set this value
to the last network address in the network range
configured for the port.rw AtNetworkNumber .1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.1.2.1.5 |
nwAtportNetAddressThe AppleTalk node number configured for the port. This
value may be used as a hint for an initial node number
used during node-finding. If the port is not a native
AppleTalk port, this object shall have the value of
three octets of zero.rw AtDdpNodeAddress .1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.1.2.1.6 |
nwAtportSTATUSIndicates the current state of the router port's
AppleTalk configuration. If either nwAtportNetConfig or
nwApportZoneConfig are set to (5), conflictAverseSeed,
and either the configured network number range or zone
name seeded by the port conflict with the settings of a
neighbor router, nwApPortStatus will have a value of (6),
offDueToConflict.rw Enumeration .1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.1.2.1.7 |
nwAtportNetConfigSpecifies the network configuration type of the port.
If the port is not a native AppleTalk port, this object
will have an unconfigured (4) value.rw Enumeration .1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.1.2.1.8 |
nwAtportZoneConfigSpecifies the zone information configuration type of the port. If the port is not a native AppleTalk port, this object will have an unconfigured (4) value.rw Enumeration .1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.1.2.1.9 |
nwAtportZoneDefaultSpecifies the name of the default zone for the port. If
the port only has one zone, that zone is represented
here. If the port is not a native AppleTalk port, this
object will contain an octet string of zero length.rw AtName .1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.1.2.1.10 |
nwAtportIfIndexIndicates the value of MIB 2 ifIndex, which identifies
the router port for which the entry exists.rw INTEGER .1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.1.2.1.11 |
nwAtportNetFromWhen nwAtportNetConfig is set to garnered (2), this
variable contains the DDP address of the entity from
which the AppleTalk network number was garnered. When
nwAtportNetConfig is set to conflictOrientedSeed (1),
conflictAverseSeed (5), or softSeed (6), this variable
contains the DDP address of an entity which supplied or
confirmed the AppleTalk network number. If
nwAtportNetConfig is set to guessed (3) or
unconfigured (4), or if the AppleTalk Routing
Services-enabled device has not received any network
number confirmation, this object will be set to three
octets of zero.ro AtDdpNodeAddress .1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.1.2.1.12 |
nwAtportZoneFromWhen nwAtportZoneConfig is set to garnered (2), this
variable contains the DDP address of the entity from
which the AppleTalk Zone List was garnered. When
nwAtportZoneConfig is set to conflictOrientedSeed (1),
conflictAverseSeed (5), or softSeed (6), this variable
contains the DDP address of an entity which supplied or
confirmed the AppleTalk zone information. If
nwAtportZoneConfig is set to guessed (3) or unconfigured
(4), or if the AppleTalk Routing Services-enabled device
has not received any zone confirmation, this object will
be set to three octets of zero.ro AtDdpNodeAddress .1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.1.2.1.13 |
nwAtportInPktsThe total number of AppleTalk packets received on the
port.ro Counter .1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.1.2.1.14 |
nwAtportOutPktsThe total number of AppleTalk packets transmitted on the
port.ro Counter .1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.1.2.1.15 |
nwAtportHomeThe value of nwAtportHome indicates whether or not the
AppleTalk Routing Services-enabled device, the routing
entity, is `homed' on the port for which the entry exists.
If the entity is homed on the port, then it could perform
NBP (Name Binding Protocol) registrations for services
that it chooses to advertise.ro Enumeration .1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.1.2.1.16 |
nwAtportCurrentZoneSpecifies the current zone name for the port. In
general, this is the zone name in which services on the
port will be registered. If the port is not a native
AppleTalk port, this object will contain an octet string
of zero length.rw AtName .1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.1.2.1.17 |
nwAtportConflictPhysAddrIndicates the link-layer address of the device which
caused nwAtportStatus to be set to off (3). If this
address is not available, or if nwAtportStatus is not
set to off, this object will be a zero length octet
string.ro OCTET STRING .1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.1.2.1.18 |
nwAtFwdIfCounters OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.2 |
nwAtFwdIfCtrTableThis table contains an entry for each router port
configured and enabled for AppleTalk Routing Services. SEQUENCE OF NwAtFwdIfCtrEntry .1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.2.1 |
nwAtFwdIfCtrEntryEach entry indicates the current packet and byte count
of AppleTalk packets on the router port for which the
entry exists. NwAtFwdIfCtrEntry .1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.2.1.1 |
nwAtFwdIfCtrIfIndexIndicates the value MIB 2 ifindex, which identifies
the router port for which the entry exists.ro INTEGER .1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.2.1.1.1 |
nwAtFwdIfCtrAdminSTATUSSets the administrative state of the per-port AppleTalk
packet and byte counters on the router port for which
the entry exists. Enabled (3) causes these counters to
become active. Disabled (2) causes these counters to
become inactive.rw Enumeration .1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.2.1.1.2 |
nwAtFwdIfCtrResetResets the per-port AppleTalk packet and byte counters
on the router port for which the entry exists. Reset (2)
resets the counters to 0. nwAtFwdIfCtrOperationalTime is
also reset to 0.rw Enumeration .1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.2.1.1.3 |
nwAtFwdIfCtrOperationalTimeIndicates the amount of time, in hundredths of a second,
that nwAtFwdIfCtrAdminStatus has been in the current
state.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.2.1.1.4 |
nwAtFwdIfCtrInPktsIndicates the total number of AppleTalk packets that
have been received, during nwAtFwdIfCtrOperationaltime,
on the router port for which the entry exists.ro Counter .1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.2.1.1.5 |
nwAtFwdIfCtrOutPktsIndicates the total number of AppleTalk packets that
have been transmitted, during nwAtFwdIfCtrOperationaltime,
on the router port for which the entry exists.ro Counter .1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.2.1.1.6 |
nwAtFwdIfCtrFwdPktsIndicates the total number of AppleTalk packets that
have been forwarded, during nwAtFwdIfCtrOperationaltime,
on the router port for which the entry exists.ro Counter .1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.2.1.1.7 |
nwAtFwdIfCtrFilteredPktsIndicates the total number of AppleTalk packets that
have been administratively filtered, during
nwAtFwdIfCtrOperationalTime, on the router port for which
the entry exists.ro Counter .1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.2.1.1.8 |
nwAtFwdIfCtrDiscardPktsIndicates the total number of AppleTalk packets that
have been discarded (dropped), during
nwAtFwdIfCtrOperationalTime, on the router port for which
the entry exists.ro Counter .1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.2.1.1.9 |
nwAtFwdIfCtrAddrErrPktsIndicates the total number of AppleTalk packets that
have been discarded, because of addressing errors in the
AppleTalk header, during nwAtFwdIfCtrOperationalTime,
on the router port for which the entry exists.ro Counter .1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.2.1.1.10 |
nwAtFwdIfCtrLenErrPktsIndicates the total number of AppleTalk packets that
have been discarded, because an invalid packet length
was contained in the AppleTalk header, during
nwAtFwdIfCtrOperationalTime, on the router port for which
the entry exists.ro Counter .1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.2.1.1.11 |
nwAtFwdIfCtrHdrErrPktsIndicates the total number of AppleTalk packets that
have been discarded, because of an invalid AppleTalk
header, during nwAtFwdIfCtrOperationalTime, on the router
port for which the entry exists.ro Counter .1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.2.1.1.12 |
nwAtFwdIfCtrInBytesIndicates the total number of bytes in the AppleTalk
packets that have been received, during
nwAtFwdIfCtrOperationalTime, on the router port for which
the entry exists.ro Counter .1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.2.1.1.13 |
nwAtFwdIfCtrOutBytesIndicates the total number of bytes in the AppleTalk
packets that have been transmitted, durin
nwAtFwdIfCtrOperationalTime, on the router port for which
the entry exists.ro Counter .1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.2.1.1.14 |
nwAtFwdIfCtrFwdBytesIndicates the total number of bytes in the AppleTalk
packets that have been forwarded, during
nwAtFwdIfCtrOperationalTime, on the router port for which
the entry exists.ro Counter .1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.2.1.1.15 |
nwAtFwdIfCtrFilteredBytesIndicates the total number of bytes in the AppleTalk
packets that have been administratively filtered, during
nwAtFwdIfCtrOperationalTime, on the router port for which
the entry exists.ro Counter .1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.2.1.1.16 |
nwAtFwdIfCtrDiscardBytesIndicates the total number of bytes in the AppleTalk
packets that have been discarded, during
nwAtFwdIfCtrOperationalTime, on the router port for which
the entry exists.ro Counter .1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.2.1.1.17 |
nwAtFwdIfCtrHostInPktsIndicates the total number of AppleTalk packets that
have been successfully delivered to the local host during
nwAtFwdIfCtrOperationalTime, that were received on the
router port for which the entry exists.ro Counter .1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.2.1.1.18 |
nwAtFwdIfCtrHostOutPktsIndicates the total number of AppleTalk packets that
have been transmitted by the local host, during
nwAtFwdIfCtrOperationalTime, on the router port for which
the entry exists.ro Counter .1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.2.1.1.19 |
nwAtFwdIfCtrHostDiscardPktsIndicates the total number of AppleTalk packets that
have been discarded by the local host due to a lack of
host resources during nwAtFwdIfCtrOperationalTime, that
were received on the router port for which the entry
exists.ro Counter .1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.2.1.1.20 |
nwAtFwdIfCtrHostInBytesIndicates the total number of bytes in the AppleTalk
packets that have been successfully delivered to the
local host, during nwAtFwdIfCtrOperationalTime, that
were received on the router port for which the entry
exists.ro Counter .1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.2.1.1.21 |
nwAtFwdIfCtrHostOutBytesIndicates the total number of bytes in the AppleTalk
packets that have been transmitted by the local host,
during nwAtFwdIfCtrOperationalTime, on the router port
for which the entry exists.ro Counter .1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.2.1.1.22 |
nwAtFwdIfCtrHostDiscardBytesIndicates the total number of bytes in the AppleTalk
packets that have been discarded by the local host, due
to a lack of host resources during
nwAtFwdIfCtrOperationalTime, that were received on the
router port for which the entry exists.ro Counter .1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.2.1.1.23 |
nwAtTopology OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.2.2.2.3.4.2.4 |
nwAtDistanceVector OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1 |
nwAtProto OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1 |
nwAtProtoSystem OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.1 |
nwAtProtoConfig OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.1.1 |
nwAtProtoAdminSTATUSSets the administrative state of the AppleTalk
distance-vector based routing protocol system-wide.
Enabled (3) causes the routing protocol to become active
on all router ports configured and enabled for AppleTalk
Routing Services. Disabled (2) causes the routing protocol
to become inactive.rw Enumeration .1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.1.1.1 |
nwAtProtoOperSTATUSIndicates the current operating condition of the
AppleTalk Routing Services distance-vector-based routing
protocol, system-wide. The value of nwAtProtoOperStatus
indicates any problem with the routing protocol
configuration. A value of 6 indicates that regardless of
the value of nwAtProtoAdminStatus, the routing protocol
is not operating because of an invalid configuration.ro Enumeration .1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.1.1.2 |
nwAtProtoAdminResetResets the routing protocol. Reset (2) forces a
system-wide restart of the protocol without a graceful
shutdown on any active router ports.rw Enumeration .1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.1.1.3 |
nwAtProtoOperationalTimeIndicates the elapsed time, in hundredths of a second,
that nwAtProtoOperStatus has been in the current state.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.1.1.4 |
nwAtProtoVersionIndicates the current revision level of the AppleTalk
routing protocol firmware, in textual format.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.1.1.5 |
nwAtProtoStackSizeSpecifies the stack size of the AppleTalk routing
protocol thread. In order for a change of this value to
take effect, the protocol (nwAtProtoAdminReset),
AppleTalk Routing Services (nwAtProtoAdminReset), or the
device running Routing Services must be reset.rw INTEGER .1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.1.1.6 |
nwAtProtoThreadPrioritySpecifies the run-time execution priority of the
AppleTalk routing protocol thread. In order for a change
of this value to take effect, the AppleTalk protocol
(nwAtProtoAdminReset), AppleTalk Routing Services
(nwAtProtoAdminReset), or the device running Routing
Services must be reset.rw INTEGER .1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.1.1.7 |
nwAtProtoDatabaseThresholdSpecifies the run-time maximum number of entries that
can be held in the AppleTalk routing protocol route
table.rw INTEGER .1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.1.1.8 |
nwAtProtoAgeOutSpecifies the amount of time (in seconds) an inactive entry
will be allowed to remain in the AppleTalk routing protocol routing table, before it is deleted, or aged-out.rw INTEGER .1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.1.1.9 |
nwAtProtoHoldDownThis object does not apply to this protocol. It is a
common object, inherited from the MIB framework used to
provide a common management interface to all the Cabletron
Routing Services protocol-specific MIBs. Setting this
object has no effect.rw INTEGER .1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.1.1.10 |
nwAtProtoCounters OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.1.2 |
nwAtProtoCtrAdminSTATUSSets the administrative state of the aggregate
(system-wide) AppleTalk routing protocol packet and byte
counters. Enabled (3)causes these counters to become
active. Disabled (2) causes these counters to be come
inactive.rw Enumeration .1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.1.2.1 |
nwAtProtoCtrResetResets the aggregate (system-wide) AppleTalk
distance-vector based routing protocol packet and byte
counters. Reset (2) resets the AppleTalk aggregate
counters to 0. nwAtProtoCtrOperationalTime is also reset
to 0.rw Enumeration .1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.1.2.2 |
nwAtProtoCtrOperationalTimeIndicates the elapsed time, in hundreds of seconds, that
nwAtProtoCtrAdminStatus, has been in the current
administrative state.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.1.2.3 |
nwAtProtoCtrInPktsIndicates the total number of AppleTalk routing protocol
packets that have been received, system-wide, during
nwAtProtoCtrOperationalTime.ro Counter .1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.1.2.4 |
nwAtProtoCtrOutPktsIndicates the total number of AppleTalk routing protocol
packets that have been transmitted, system-wide, during
nwAtProtoCtrOperationalTime.ro Counter .1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.1.2.5 |
nwAtProtoCtrFilteredPktsIndicates the total number of AppleTalk routing protocol
packets that have been administratively filtered,
system-wide, during nwAtProtoCtrOperationalTime.ro Counter .1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.1.2.6 |
nwAtProtoCtrDiscardPktsIndicates the total number of AppleTalk routing protocol
packets that have been discarded, system-wide, during
nwAtProtoCtrOperationalTime.ro Counter .1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.1.2.7 |
nwAtProtoCtrInBytesIndicates the total number of bytes in the AppleTalk
routing protocol packets that have been received,
system-wide, during nwAtProtoCtrOperationalTime.ro Counter .1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.1.2.8 |
nwAtProtoCtrOutBytesIndicates the total number of bytes in the AppleTalk
routing protocol packets that have been transmitted,
system-wide, during nwAtProtoCtrOperationalTime.ro Counter .1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.1.2.9 |
nwAtProtoCtrFilteredBytesIndicates the total number of bytes in the AppleTalk
routing protocol packets that have been administratively
filtered, system-wide, during
nwAtProtoCtrOperationalTime.ro Counter .1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.1.2.10 |
nwAtProtoCtrDiscardBytesIndicates the total number of bytes in the AppleTalk
routing protocol packets that have been discarded,
system-wide during nwAtProtoCtrOperationalTime.ro Counter .1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.1.2.11 |
nwAtProtoInterface OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.2 |
nwAtProtoIfConfig OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.2.1 |
nwAtProtoIfTableThis table contains an entry for each router port. Each
entry can contain different values, allowing the routing
protocol configuration to vary from router port to router
port. This table is indexed by nwAtProtoIfIndex, which
indicates the value of MIB 2 ifindex, which identifies
the router port for which the entry exists. SEQUENCE OF NwAtProtoIfEntry .1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.2.1.1 |
nwAtProtoIfEntryEach entry contains the AppleTalk routing protocol
configuration for the router port for which the entry
exists. NwAtProtoIfEntry .1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.2.1.1.1 |
nwAtProtoIfIndexIndicates the value of MIB 2 ifindex, which identifies
the router port for which the entry exists.ro INTEGER .1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.2.1.1.1.1 |
nwAtProtoIfAdminSTATUSSets the administrative state of the AppleTalk routing
protocol on the router port for which the entry exists.
Enabled (3) causes the routing protocol to become active
on the router port. Disabled (2) causes it to become
inactive.rw Enumeration .1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.2.1.1.1.2 |
nwAtProtoIfOperSTATUSIndicates the current operating condition of the
AppleTalk routing protocol on the router port for which
the entry exists. The value of nwAtProtoIfOperStatus
indicates any problem with your AppleTalk routing
protocol configuration on the router port. A value of 6
indicates that regardless of the value of
nwAtProtoIfAdminStatus, the routing protocol is not
operating on the router port because of an invalid
configuration.ro Enumeration .1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.2.1.1.1.3 |
nwAtProtoIfOperationalTimeIndicates the elapsed time, in hundreds of seconds, that
nwAtProtoIfOperStatus has been in the current state.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.2.1.1.1.4 |
nwAtProtoIfVersionIndicates the revision level of AppleTalk routing
protocol firmware on the router port for which the entry
exists, in textual format.rw INTEGER .1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.2.1.1.1.5 |
nwAtProtoIfAdvertisementThis specifies the periodic interval (in seconds) that the
AppleTalk routing protocol agent will advertise routes on this
DECnet routing port.rw INTEGER .1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.2.1.1.1.6 |
nwAtProtoIfFloodDelayThis object does not apply to this protocol. It is a
common object, inherited from the MIB framework used to
provide a common management interface to all the
Cabletron Routing Services protocol specific MIBs.
Setting this object has no effectrw INTEGER .1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.2.1.1.1.7 |
nwAtProtoIfRequestDelayThis object does not apply to this protocol. It is a
common object, inherited from the MIB framework used to
provide a common management interface to all the Cabletron
Routing Services protocol specific MIBs. Setting this
object has no effect.rw INTEGER .1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.2.1.1.1.8 |
nwAtProtoIfPrioritySets the priority of the AppleTalk routing protocol on
the router port for which the entry exists.rw INTEGER .1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.2.1.1.1.9 |
nwAtProtoIfHelloTimerThis object does not apply to this protocol. It is a
common object, inherited from the MIB framework used to
provide a common management interface to all the
Cabletron Routing Services protocol specific MIBs.
Setting this object has no effect.rw INTEGER .1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.2.1.1.1.10 |
nwAtProtoIfSplitHorizonSets the operating condition of Split Horizon on the
router port for which the entry exists. When Split Horizon
is enabled, the AppleTalk routing protocol keeps track of
which router port route information is received on, and
prevents information about a route form being sent back
out the same router port it was received on.rw Enumeration .1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.2.1.1.1.11 |
nwAtProtoIfPoisonReverseSets the operating condition of Poison Reverse on the
router port for which the entry exists. When Poison
Reverse is enabled, the AppleTalk routing protocol
advertises any downed routes as unreachable during the
period of time that it must wait before removing the
route from the route table.rw Enumeration .1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.2.1.1.1.12 |
nwAtProtoIfSnoopingControls the operation of AppleTalk routing protocol
Snooping on the router port. When AppleTalk routing
protocol Snooping is enabled, the routing protocol
operates in passive mode, so that it receives route
information, builds and maintains a route table, but
does not advertise or send updates on the router port for
which the entry exists.rw Enumeration .1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.2.1.1.1.13 |
nwAtProtoIfTypeIndicates whether the directly connected network
segment does or does not support broadcast media access.
If broadcast media access is supported, AppleTalk routing
protocol advertisements are sent out one broadcast packet
per port. If broadcast media is not supported, AppleTalk
routing protocol advertisements are sent to each
neighbor.rw Enumeration .1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.2.1.1.1.14 |
nwAtProtoIfXmitCostSets the cost of transmitting a packet on the network
segment connected to router port for which the entry
exists.rw INTEGER .1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.2.1.1.1.15 |
nwAtProtoIfAclIdentifierSpecifies the Access Control List ID of the access
control list in effect for AppleTalk routing protocol
packets on the router port for which the entry exists. A
value of 0 indicates that there is no access control list
in effect for AppleTalk routing protocol packets on the
router port.rw INTEGER .1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.2.1.1.1.16 |
nwAtProtoIfAclSTATUSControls the operation of the access control list
identified by nwAtProtoIfAclIdentifier. Enabled (3)
causes the access control list to be applied to all
AppleTalk routing protocol packet traffic on the router
port for which the entry exists. Disabled (2) prevents
the access control list from being applied.rw Enumeration .1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.2.1.1.1.17 |
nwAtProtoIfCounters OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.2.2 |
nwAtProtoIfCtrTableThis table contains the AppleTalk packet and byte counters for
each router port on this device. SEQUENCE OF NwAtProtoIfCtrEntry .1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.2.2.1 |
nwAtProtoIfCtrEntryEach entry specifies the DECnet Phase IV packet and byte
counters on a per router port basis. NwAtProtoIfCtrEntry .1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.2.2.1.1 |
nwAtProtoIfCtrIfIndexThis is the primary index into the AppleTalk interface counter
table. This number corresponds to the index into the mib2
InterfaceTable which describes the router port for which
the entry exists.ro INTEGER .1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.2.2.1.1.1 |
nwAtProtoIfCtrAdminSTATUSSets the administrative state of the AppleTalk packet and byte
counters on the router port for which the entry exists.
enabled(3) causes these counters to become active on the
configured AppleTalk router port. disabled(2) causes these
counters to become inactive on the configured AppleTalk router
port.rw Enumeration .1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.2.2.1.1.2 |
nwAtProtoIfCtrResetResets the AppleTalk packet and byte counters on the router
port for which the entry exists. reset (2) resets the
interface-specific counters to 0.
nwAtProtoIfCtrOperationalTime is also reset to 0.rw Enumeration .1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.2.2.1.1.3 |
nwAtProtoIfCtrOperationalTimeIndicates the amount of time (No. of time ticks) that the
interface-specific AppleTalk packet and byte counters have been
active on the router port for which the entry exists.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.2.2.1.1.4 |
nwAtProtoIfCtrInPktsIndicates the total number of AppleTalk packets that have been
received, on the router port for which the entry exists,
during nwAtProtoIfCtrOperationalTime.ro Counter .1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.2.2.1.1.5 |
nwAtProtoIfCtrOutPktsIndicates the total number of AppleTalk packets that have been forwarded, on the router port for which the entry exists, during nwAtProtoIfCtrOperationalTime.ro Counter .1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.2.2.1.1.6 |
nwAtProtoIfCtrFilteredPktsIndicates the total number of AppleTalk packets that have been
administratively filtered, on the router port for which this
entry exists, during nwAtProtoIfCtrOperationalTime.ro Counter .1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.2.2.1.1.7 |
nwAtProtoIfCtrDiscardPktsIndicates the total number of AppleTalk packets that have been discarded, on the router port for which the entry exists, during
nwAtProtoIfCtrOperationalTime.ro Counter .1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.2.2.1.1.8 |
nwAtProtoIfCtrInBytesIndicates the total number of bytes in the AppleTalk packets that have been received, on the router port for which the entry exists, during nwAtProtoIfCtrOperationalTime.ro Counter .1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.2.2.1.1.9 |
nwAtProtoIfCtrOutBytesIndicates the total number of bytes in the AppleTalk packets that have been forwarded, on the router port for which the entry exists, during nwAtProtoIfCtrOperationalTime.ro Counter .1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.2.2.1.1.10 |
nwAtProtoIfCtrFilteredBytesIndicates the total number of bytes in the AppleTalk packets that have been administratively filtered, that were received on the router port for which the entry exists, during nwAtProtoIfCtrOperationalTime.ro Counter .1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.2.2.1.1.11 |
nwAtProtoIfCtrDiscardBytesIndicates the total number of bytes in the AppleTalk packets that have been discarded, that were received on the router port for
which the entry exists, during nwAtIfCtrOperationalTime.ro Counter .1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.2.2.1.1.12 |
nwAtLinkState OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.2 |
nwAtFib OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.2.2.2.3.4.2.5 |
nwAtFibTableThis table contains an entry for each route being used
to forward AppleTalk data packets. SEQUENCE OF NwAtFibEntry .1.3.6.1.4.1.52.4.2.2.2.3.4.2.5.1 |
nwAtFibEntryEach entry in the table describes an AppleTalk route
to a particular destination. NwAtFibEntry .1.3.6.1.4.1.52.4.2.2.2.3.4.2.5.1.1 |
nwAtFibStartNetIndicates the start of the network range for the route.ro AtNetworkNumber .1.3.6.1.4.1.52.4.2.2.2.3.4.2.5.1.1.1 |
nwAtFibEndNetIndicates the end of the network range for the route.ro AtNetworkNumber .1.3.6.1.4.1.52.4.2.2.2.3.4.2.5.1.1.2 |
nwAtFibNextHopIndicates the full AppleTalk network address of the
next hop router for the route. An address of all zeros
indicates a directly connected net.ro AtDdpNodeAddress .1.3.6.1.4.1.52.4.2.2.2.3.4.2.5.1.1.3 |
nwAtFibNextHopIfIndicates the value of MIB 2 ifindex, which identifies
the router port through which the next hop node exists.
Packets destined for the network specified by the entry
will be forwarded on this router port.ro INTEGER .1.3.6.1.4.1.52.4.2.2.2.3.4.2.5.1.1.4 |
nwAtFibHopsIndicates the number of hops required to reach the
destination for which the entry exists. It is considered
as metric 1.ro INTEGER .1.3.6.1.4.1.52.4.2.2.2.3.4.2.5.1.1.5 |
nwAtFibRouteTypeIndicates the type of route (Allows for PPP entries
later).ro Enumeration .1.3.6.1.4.1.52.4.2.2.2.3.4.2.5.1.1.6 |
nwAtEndSystems OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.2.2.2.3.4.2.6 |
nwAtHostsSystem OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.2.2.2.3.4.2.6.1 |
nwAtHostsTimeToLiveIndicates the amount of time (in minutes) that an entry
can remain in the AARP cache.ro INTEGER .1.3.6.1.4.1.52.4.2.2.2.3.4.2.6.1.1 |
nwAtHostsRetryCountIndicates the maximum number of times AppleTalk Routing
Services will retry each attempt to resolve a host
address.ro Counter .1.3.6.1.4.1.52.4.2.2.2.3.4.2.6.1.2 |
nwAtHostsInterfaces OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.2.2.2.3.4.2.6.2 |
nwAtHostCtlTableThis table contains the control information for
maintaining an AARP cache on each router port. Note that
the cache entries are maintained by theAppleTalk Address
Resolution Protocol Table of the AppleTalk MIB. SEQUENCE OF NwAtHostCtlEntry .1.3.6.1.4.1.52.4.2.2.2.3.4.2.6.2.1 |
nwAtHostCtlEntryEach entry contains the control information for the ARP
cache on the router port indicated by the value
nwAtHostCtlIfIndex. NwAtHostCtlEntry .1.3.6.1.4.1.52.4.2.2.2.3.4.2.6.2.1.1 |
nwAtHostCtlIfIndexIndicates the value of MIB2 ifindex, which identifies
the router port for which the entry exists.ro INTEGER .1.3.6.1.4.1.52.4.2.2.2.3.4.2.6.2.1.1.1 |
nwAtHostCtlAdminSTATUSSets the administrative state of the AARP cache on the
router port for which the entry exists. Enabled (3) causes
AARP caching to become active. Disabled (2) causes AARP
caching to perform a graceful shutdown.rw Enumeration .1.3.6.1.4.1.52.4.2.2.2.3.4.2.6.2.1.1.2 |
nwAtHostCtlOperSTATUSIndicates the current operating condition of the AARP
Table on the router port for which the entry exists.ro Enumeration .1.3.6.1.4.1.52.4.2.2.2.3.4.2.6.2.1.1.3 |
nwAtHostCtlOperationalTimeIndicates the amount of time, in hundredths of a second,
that nwAtHostCtlOperStatus has been in the current state.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.52.4.2.2.2.3.4.2.6.2.1.1.4 |
nwAtHostCtlProtocolControls the operation of the AARP protocol on the
router port for which the entry exists.rw Enumeration .1.3.6.1.4.1.52.4.2.2.2.3.4.2.6.2.1.1.5 |
nwAtHostCtlSnoopingControls AARP Snooping on the router port for which the
entry exists. Given the AARP protocol is enabled,
setting nwAtHostCtlIfSnooping to enabled (3) turns on AARP Snooping.
When AARP Snooping is enabled the source AppleTalk and physical
addresses of all AARP packets received on the router port are added to
the AARP Table.rw Enumeration .1.3.6.1.4.1.52.4.2.2.2.3.4.2.6.2.1.1.6 |
nwAtHostCtlProxyThis object does not apply to this protocol. It is a
common object, inherited from the MIB framework used to
provide a common management interface to all the Cabletron
Routing Services protocol-specific MIBs. Setting this
object has no effect.rw Enumeration .1.3.6.1.4.1.52.4.2.2.2.3.4.2.6.2.1.1.7 |
nwAtHostCtlCacheMaxIndicates the maximum number of entry slots the AARP
cache can consist of. nwAtHostCtlCacheMax cannot be set
to less than 16. Setting this value does not allocate
any memory for the cache.rw INTEGER .1.3.6.1.4.1.52.4.2.2.2.3.4.2.6.2.1.1.8 |
nwAtHostCtlCacheSizeIndicates the current number of entry slots in the AARP
cache on the router port for which the entry exists. The
cache automatically resizes to accommodate all entries
up to the maximum number of entries set by
nwAtHostCtlCacheMax.rw INTEGER .1.3.6.1.4.1.52.4.2.2.2.3.4.2.6.2.1.1.9 |
nwAtHostCtlNumStaticsIndicates the total number of static entries in the AARP
cache on the router port for which the entry exists.
Static entries remain in the cache until they are
administratively removed.ro Counter .1.3.6.1.4.1.52.4.2.2.2.3.4.2.6.2.1.1.10 |
nwAtHostCtlNumDynamicsIndicates the number of dynamic entries in the AARP
cache on the router port for which the entry exists.
Dynamic entries area added and aged out by the AARP
protocol.ro Counter .1.3.6.1.4.1.52.4.2.2.2.3.4.2.6.2.1.1.11 |
nwAtHostCtlCacheHitsIndicates the number of times an entry in the AARP cache
has been used to successfully provide the physical address
required to forward an AppleTalk packet on the router
port for which the entry exists.ro Counter .1.3.6.1.4.1.52.4.2.2.2.3.4.2.6.2.1.1.12 |
nwAtHostCtlCacheMissesIndicates the number of times the physical address
required to forward an AppleTalk packet has not been
found in the AARP cache on the router port for which the
entry exists.ro Counter .1.3.6.1.4.1.52.4.2.2.2.3.4.2.6.2.1.1.13 |
nwAtHostsToMedia OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.2.2.2.3.4.2.6.3 |
nwAtHostMapTableThe Ip Address translation table used for mapping an IP
address to physical address, framing, port and circuit
identifier, if applicable. SEQUENCE OF NwAtHostMapEntry .1.3.6.1.4.1.52.4.2.2.2.3.4.2.6.3.1 |
nwAtHostMapEntryEach entry contains one AtNetworkNumber to 'physical'
address equivalence, including a circuit identifier
if applicable. Also provided is the framing and
port number required to converse with this host. NwAtHostMapEntry .1.3.6.1.4.1.52.4.2.2.2.3.4.2.6.3.1.1 |
nwAtHostMapIfIndexThis is the primary (major) index into the HostMap
table. This number corresponds to the index into the
MIB-2 Interfaces Group which describes the IP router
port for which the entry exists.ro INTEGER .1.3.6.1.4.1.52.4.2.2.2.3.4.2.6.3.1.1.1 |
nwAtHostMapAtAddrThe AtDdpNodeAddress corresponding to the
media-dependent 'physical' address and circuit
identifier (if applic).ro AtDdpNodeAddress .1.3.6.1.4.1.52.4.2.2.2.3.4.2.6.3.1.1.2 |
nwAtHostMapPhysAddrThe media-dependent 'physical' address. The value of
this object is 0 for entries indicating native-wan(8)
framing.rw PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.52.4.2.2.2.3.4.2.6.3.1.1.3 |
nwAtHostMapTypeSetting this object to the value invalid(2) has
the effect of invalidating the corresponding entry
in the nwAtHostMapTable. That is, it effectively
dissasociates the circuit identified with said
entry from the mapping identified with said entry.
It is an implementation-specific matter as to
whether the agent removes an invalidated entry
from the table. Accordingly, management stations
must be prepared to receive tabular information
from agents that corresponds to entries not
currently in use. Proper interpretation of such
entries requires examination of the relevant
nwAtHostMapType object.rw Enumeration .1.3.6.1.4.1.52.4.2.2.2.3.4.2.6.3.1.1.4 |
nwAtHostMapCircuitIDThe identifier for the virtual circuit present on the
interface. On an interface configured for Frame Relay,
this number is the DLCI for the IP Address at the end of
the circuit. For non-WAN interfaces, the value of this
object is zero.rw INTEGER .1.3.6.1.4.1.52.4.2.2.2.3.4.2.6.3.1.1.5 |
nwAtHostMapFramingSpecifies the framing type required to converse with the
host for which this entry exists.rw Enumeration .1.3.6.1.4.1.52.4.2.2.2.3.4.2.6.3.1.1.6 |
nwAtHostMapPortNumberThe unique value for the logical port number. It's value
ranges between 1 and a maximum value which is dependent on
both the number of interfaces in the system and the number
of circuits present on interfaces which are of WAN type.ro INTEGER .1.3.6.1.4.1.52.4.2.2.2.3.4.2.6.3.1.1.7 |
nwAtAccessControl OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.2.2.2.3.4.2.7 |
nwAtAclValidEntriesIndicates the number of valid entries that exist in the
Access Control List Table.ro Gauge .1.3.6.1.4.1.52.4.2.2.2.3.4.2.7.1 |
nwAtAclTableThis table contains the Access Control List information
for theAppleTalk protocol. This table contains entries,
each of which allows packet forwarding between
source/destination pairs to be permitted or denied. The
particular list is identified by the access control
list ID. Each list may contain multiple entries ordered
by sequence number. When a particular access control list
is searched, it is searched in sequence number order and
the first match found ends the search. If no match is
found, access defaults to permitted. SEQUENCE OF NwAtAclEntry .1.3.6.1.4.1.52.4.2.2.2.3.4.2.7.2 |
nwAtAclEntryEach entry contains AppleTalk source/destination access
information. NwAtAclEntry .1.3.6.1.4.1.52.4.2.2.2.3.4.2.7.2.1 |
nwAtAclIdentifierThis is the primary (major) index into the AppleTalk
access control list table. Essentially, this identifies
the access control list by a unique identifier (at least 1)
and is arbitrarily assigned by the user. All entries that
have the same ID belong to the same access control list.ro INTEGER .1.3.6.1.4.1.52.4.2.2.2.3.4.2.7.2.1.1 |
nwAtAclSequenceThis is the secondary (minor) index into the AppleTalk
access control list table. This number corresponds to a
sequence number used to order multiple entries within the
same access control list.ro INTEGER .1.3.6.1.4.1.52.4.2.2.2.3.4.2.7.2.1.2 |
nwAtAclPermissionSpecifies whether access is allowed or denied between
the source and destination address pairs. Note that
source and destination are interchangeable when
bi-directional control is selected. To remove an existing
entry set invalid (2), and it will disappear after
reboot.rw Enumeration .1.3.6.1.4.1.52.4.2.2.2.3.4.2.7.2.1.3 |
nwAtAclMatchesIndicates the number of matches on this entry that
have resulted in the access restriction permit/deny
being applied as part of the forwarding process.ro Counter .1.3.6.1.4.1.52.4.2.2.2.3.4.2.7.2.1.4 |
nwAtAclDestZoneSpecifies the destination zone name used to compare for
matches on the access control list.rw AtName .1.3.6.1.4.1.52.4.2.2.2.3.4.2.7.2.1.5 |
nwAtAclSrcZoneSpecifies the source zone to be used to compare for
matches on the access control list.rw AtName .1.3.6.1.4.1.52.4.2.2.2.3.4.2.7.2.1.6 |
nwAtFilters OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.2.2.2.3.4.2.8 |
nwAtRedirector OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.2.2.2.3.4.2.9 |
nwAtEvent OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.2.2.2.3.4.2.10 |
nwAtEventLogConfig OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.2.2.2.3.4.2.10.1 |
nwAtEventAdminSTATUSSets the administrative state of AppleTalk event
logging. Enabled (3) causes the event log to become
active. Disabled (2) causes the event log to become
inactive.rw Enumeration .1.3.6.1.4.1.52.4.2.2.2.3.4.2.10.1.1 |
nwAtEventMaxEntriesSets the maximum number of entries allowed in the event
log table. When the number of entries reaches the value
of nwAtEventMaxEntries the first (oldest) entry is deleted
to allow a new entry to be added.rw INTEGER .1.3.6.1.4.1.52.4.2.2.2.3.4.2.10.1.2 |
nwAtEventTraceAllEnabled (3) allows logging of all event types on all
router ports from all protocols and components. Disabled
(2) causes the event log filter table to specify which
events to log.rw Enumeration .1.3.6.1.4.1.52.4.2.2.2.3.4.2.10.1.3 |
nwAtEventLogFilterTable OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.2.2.2.3.4.2.10.2 |
nwAtEventFilterTableThis table contains an entry for each event filter
configured for AppleTalk Routing Service's events. SEQUENCE OF NwAtEventFilterEntry .1.3.6.1.4.1.52.4.2.2.2.3.4.2.10.2.1 |
nwAtEventFilterEntryEach entry describes an event filter which defines a
particular type of event to be logged to the event log.
The value of nwIpEventProtocol indicates the value used
in either the nwRtgProtocolTable or the nwComponentTable
Cabletron Routing Services MIB, which indentifies the
protocol to which the entry exists. NwAtEventFilterEntry .1.3.6.1.4.1.52.4.2.2.2.3.4.2.10.2.1.1 |
nwAtEventFltrProtocolIndicates the value of the Cabletron Routing Services
MIB nwRtgProtocolInstance or nwComponentRtgInstance,
which identifies the protocol involved in the event for
which the event filter exists.ro INTEGER .1.3.6.1.4.1.52.4.2.2.2.3.4.2.10.2.1.1.1 |
nwAtEventFltrIfNumSpecifies the router port involved in the event for
which the event filter exists.ro INTEGER .1.3.6.1.4.1.52.4.2.2.2.3.4.2.10.2.1.1.2 |
nwAtEventFltrControlSet this value to 3 to add the entry to the event log
table. Set this value to 2 to remove the entry from the
event filter table.rw Enumeration .1.3.6.1.4.1.52.4.2.2.2.3.4.2.10.2.1.1.3 |
nwAtEventFltrTypeThis 6 bit mask specifies the types of events to be
logged. By default all 6 bits are set to 1, indicating
that all types of events are to be logged. Setting any bit
to 0 removes an event type from this field and prevents
that type of event from being logged. Setting any bit to 1
adds an event type to this field and enables that type of
event to be logged.rw Enumeration .1.3.6.1.4.1.52.4.2.2.2.3.4.2.10.2.1.1.4 |
nwAtEventFltrSeveritySpecifies the level of severity an event must meet in
order to be logged. Controls the amount of event logging
by ignoring events of a lower priority than specified by
this filter value. `Highmed' ignores only events of the
lowest severity. `Highlow' logs all events highest priority
through lowest. `Highest' severity causes all events
except those of the highest severity to be ignored.
`Highmed' severity is the default setting which causes
only events of the lowest severity to be ignored.
`Highlow' severity logs all events, regardless of
severity.rw Enumeration .1.3.6.1.4.1.52.4.2.2.2.3.4.2.10.2.1.1.5 |
nwAtEventFltrActionSpecifies how the events are to be logged. Logging to
the `log' stores the events in the event log table
(nwIpEventFltrAction). Logging to `trap' sends events
out through the trap mechanism.rw Enumeration .1.3.6.1.4.1.52.4.2.2.2.3.4.2.10.2.1.1.6 |
nwAtEventLogTable OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.2.2.2.3.4.2.10.3 |
nwAtEventTableThis table contains an entry for each event that has
been logged. SEQUENCE OF NwAtEventEntry .1.3.6.1.4.1.52.4.2.2.2.3.4.2.10.3.1 |
nwAtEventEntryEach entry contains the information about an event that
has been logged to the event table. NwAtEventEntry .1.3.6.1.4.1.52.4.2.2.2.3.4.2.10.3.1.1 |
nwAtEventNumberAn ordinal value assigned to the event for which the
log entry exists. nwAtEvnetNumber is assigned so that
each event in the event log can be uniquely identified by
the value of nwAtEventNumber.ro INTEGER .1.3.6.1.4.1.52.4.2.2.2.3.4.2.10.3.1.1.1 |
nwAtEventTimeIndicates the time at which the event was logged to the
event logro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.52.4.2.2.2.3.4.2.10.3.1.1.2 |
nwAtEventTypeIndicates the type of event that was logged.ro Enumeration .1.3.6.1.4.1.52.4.2.2.2.3.4.2.10.3.1.1.3 |
nwAtEventSeverityIndicates the severity that was assigned to this event.ro Enumeration .1.3.6.1.4.1.52.4.2.2.2.3.4.2.10.3.1.1.4 |
nwAtEventProtocolIndicates the value of the Cabletron Routing Services
MIB nwRtgProtocolInstance or nwComponentInstance which
identifies the protocol or component that was involved in
the event.ro INTEGER .1.3.6.1.4.1.52.4.2.2.2.3.4.2.10.3.1.1.5 |
nwAtEventIfNumIndicates the router port that was involved in the
event.ro INTEGER .1.3.6.1.4.1.52.4.2.2.2.3.4.2.10.3.1.1.6 |
nwAtEventTextStringContains the actual text string that was logged.ro OCTET STRING .1.3.6.1.4.1.52.4.2.2.2.3.4.2.10.3.1.1.7 |
nwAtWorkGroup OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.2.2.2.3.4.2.11 |
nwAtNetDiag OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.2.2.2.3.4.2.12 |
nwAtNetDiagPing OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.2.2.2.3.4.2.12.1 |
nwAtNetDiagTelnet OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.2.2.2.3.4.2.12.2 |
nwAtNetDiagOutbound OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.2.2.2.3.4.2.12.3 |
nwAtNetDiagOutboundNetAddressThe AppleTalk Network Address of a node with which the
diagnostic test will directly correspond.rw AtDdpNodeAddress .1.3.6.1.4.1.52.4.2.2.2.3.4.2.12.3.1 |
nwAtNetDiagOutboundPortAn integer representing the port through which the
diagnostic test will broadcast or multicast packets.rw INTEGER .1.3.6.1.4.1.52.4.2.2.2.3.4.2.12.3.2 |
nwAtNetDiagOutboundTimeoutAn integer representing the number of seconds before a
diagnostic request will time out.rw INTEGER .1.3.6.1.4.1.52.4.2.2.2.3.4.2.12.3.3 |
nwAtNetDiagOutboundRetriesAn integer representing the number of times a request
will be repeated before failure.rw INTEGER .1.3.6.1.4.1.52.4.2.2.2.3.4.2.12.3.4 |
nwAtNetDiagOutboundATEchoTypeThe type of echo diagnostic function to initiate. Upon
setting this to send EchoRequest (2), an echo request
will be initiated and the value will be set to noAction
(1).rw Enumeration .1.3.6.1.4.1.52.4.2.2.2.3.4.2.12.3.5 |
nwAtNetDiagOutboundATEchoStatusThe current status of the echo diagnostic.rw Enumeration .1.3.6.1.4.1.52.4.2.2.2.3.4.2.12.3.6 |
nwAtNetDiagOutboundNBPEntityObjectThe entity object or wildcard object used in the
NBP lookup diagnostic.rw AtName .1.3.6.1.4.1.52.4.2.2.2.3.4.2.12.3.7 |
nwAtNetDiagOutboundNBPEntityTypeThe entity type or wildcard type used in the
NBP lookup diagnostic.rw AtName .1.3.6.1.4.1.52.4.2.2.2.3.4.2.12.3.8 |
nwAtNetDiagOutboundNBPEntityZoneThe entity zone used in the NBP lookup diagnostic.rw AtName .1.3.6.1.4.1.52.4.2.2.2.3.4.2.12.3.9 |
nwAtNetDiagOutboundNBPTypeSpecifies the type of outbound NBP diagnostic function
to initiate. Upon setting this value to any value other
than noAction (1) or other (10), the corresponding request
will be made and the value will be set to noAction (1).rw Enumeration .1.3.6.1.4.1.52.4.2.2.2.3.4.2.12.3.10 |
nwAtNetDiagOutboundNBPStatusIndicates the current status of the outbound NBP
diagnostic.rw Enumeration .1.3.6.1.4.1.52.4.2.2.2.3.4.2.12.3.11 |
nwAtNetDiagOutboundRTMPTypeThe type of outbound RTMP diagnostic function to initiate.
Upon setting this value to a value other than noAction(1)
or other(8), the corresponding request will be initiated
and the value will be set to noAction(1).rw Enumeration .1.3.6.1.4.1.52.4.2.2.2.3.4.2.12.3.12 |
nwAtNetDiagOutboundRTMPStatusThe current status of the outbound RTMP diagnostic.rw Enumeration .1.3.6.1.4.1.52.4.2.2.2.3.4.2.12.3.13 |
nwAtNetDiagOutboundRTMPNetStartThe start of the network range from the last successful
outbound RTMP request or route data request.rw AtNetworkNumber .1.3.6.1.4.1.52.4.2.2.2.3.4.2.12.3.14 |
nwAtNetDiagOutboundRTMPNetEndThe end of the network range from the last successful
outbound RTMP request or route data request.rw AtNetworkNumber .1.3.6.1.4.1.52.4.2.2.2.3.4.2.12.3.15 |
nwAtNetDiagOutboundZIPTypeThe type of outbound ZIP diagnostic function to initiate.
Upon setting this value to a value other than noAction(1)
or other(8), the corresponding request will be initiated
and the value will be set to noAction(1).rw Enumeration .1.3.6.1.4.1.52.4.2.2.2.3.4.2.12.3.16 |
nwAtNetDiagOutboundZIPStatusThe current status of the outbound ZIP diagnostic.rw Enumeration .1.3.6.1.4.1.52.4.2.2.2.3.4.2.12.3.17 |
nwAtNetDiagOutboundZIPQueryNetThe start of the network range to send ZIP query for.rw AtNetworkNumber .1.3.6.1.4.1.52.4.2.2.2.3.4.2.12.3.18 |
nwAtNetDiagOutboundZIPQueryZoneThe first zone from the last successful ZIP query.rw AtName .1.3.6.1.4.1.52.4.2.2.2.3.4.2.12.3.19 |
nwAtNetDiagOutboundZIPGetNetInfoZoneThe zone name to be used in a ZIP get-net-info request
diagnostic.rw AtName .1.3.6.1.4.1.52.4.2.2.2.3.4.2.12.3.20 |
nwAtNetDiagOutboundZIPGetNetInfoNetStartThe start of the network range from the last successful
ZIP get-net-info request.rw AtNetworkNumber .1.3.6.1.4.1.52.4.2.2.2.3.4.2.12.3.21 |
nwAtNetDiagOutboundZIPGetNetInfoNetEndThe end of the network range from the last successful
ZIP get-net-info request.rw AtNetworkNumber .1.3.6.1.4.1.52.4.2.2.2.3.4.2.12.3.22 |
nwAtNetDiagOutboundZIPGetNetInfoMulticastThe data-link multicast address from the last successful
ZIP get-net-info request.rw OCTET STRING .1.3.6.1.4.1.52.4.2.2.2.3.4.2.12.3.23 |
nwAtNetDiagOutboundZIPGetNetInfoDefaultZoneThe default zone name from the last successful
ZIP get-net-info request.rw AtName .1.3.6.1.4.1.52.4.2.2.2.3.4.2.12.3.24 |
nwRtrExperimental OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.2.2.2.4 |
IMPORTS Unknown .1.3.6.1.4.1.52.4.2.2.2.4 |
nwAtportZoneTableThe table of zone information for non-default
zones on ports. SEQUENCE OF NwAtportZoneEntry .1.3.6.1.4.1.52.4.2.2.2.4.1 |
nwAtportZoneEntryAn entry of zone information for a port. NwAtportZoneEntry .1.3.6.1.4.1.52.4.2.2.2.4.1.1 |
nwAtportZonePortAn integer representing the port to which this zone belongs.
The port identified by a particular value of this object
is the same port as identified by the same value of
nwAtportIndex.ro INTEGER .1.3.6.1.4.1.52.4.2.2.2.4.1.1.1 |
nwAtportZoneNameA zone name configured for the AppleTalk port referred to in
the corresponding entry of nwAtportZonePort.
When this value is changed in a router, the router must
send a zipNotify packet on the associated network.ro AtName .1.3.6.1.4.1.52.4.2.2.2.4.1.1.2 |
nwAtportZoneStatusThe status of this zone entry.
Setting this object to the value invalid(2) has the
effect of invalidating the corresponding entry in the
nwAtportZoneTable. That is, it effectively disassociates
the mapping identified with said entry. It is an
implementation-specific matter as to whether the agent
removes an invalidated entry from the table.
Accordingly, management stations must be prepared to
receive from agents tabular information corresponding
to entries not currently in use. Proper
interpretation of such entries requires examination
of the relevant nwAtportZoneStatus object.rw Enumeration .1.3.6.1.4.1.52.4.2.2.2.4.1.1.3 |