CT-FASTPATH-DHCPSERVER-MIB
AI MIB Summary
The CT-FASTPATH-DHCPSERVER-MIB enables monitoring and management of DHCP server instances on Enterasys FastPath network devices, specifically tracking lease allocation statistics, binding table states, and server operational counters. This module facilitates the collection of critical performance metrics such as active lease counts, address pool utilization, and transaction error rates for the DHCP service.
The Enterasys MIB for FASTPATH DHCP Server
Main OID:
ctFastPathDHCPServerMIB.1.3.6.1.4.1.52.4.2.32.1
83
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
83 total| Object Name |
|---|
ctFastPathDHCPServerMIBThe Enterasys MIB for FASTPATH DHCP Server MODULE-IDENTITY .1.3.6.1.4.1.52.4.2.32.1 |
ctAgentDhcpServerGroup OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.2.32.1.1 |
ctAgentDhcpServerAdminModeAdmin-mode of the DHCP Server.rw Enumeration .1.3.6.1.4.1.52.4.2.32.1.1.1 |
ctAgentDhcpServerPingPktNosThe no. of packets a DHCP Server sends to a pool address as part of a ping operation.Setting the value of ping-packets to zero turns off DHCP Server ping operation .rw INTEGER (0 | 2..10) .1.3.6.1.4.1.52.4.2.32.1.1.2 |
ctAgentDhcpServerAutomaticBindingsNosThe no. of IP addresses that have been assigned automatically.ro Counter32 .1.3.6.1.4.1.52.4.2.32.1.1.3 |
ctAgentDhcpServerExpiredBindingsNosThe no. of expired leases.ro Counter32 .1.3.6.1.4.1.52.4.2.32.1.1.4 |
ctAgentDhcpServerMalformedMessagesReceivedThe no. of malformed(truncated or corrupt) messages that have been received by the DHCP server.ro Counter32 .1.3.6.1.4.1.52.4.2.32.1.1.5 |
ctAgentDhcpServerDISCOVERMessagesReceivedThe no. of DHCP messages of type DHCPDISCOVER that have been received by the DHCP server.ro Counter32 .1.3.6.1.4.1.52.4.2.32.1.1.6 |
ctAgentDhcpServerREQUESTMessagesReceivedThe no. of DHCP messages of type DHCPREQUEST that have been received by the DHCP server.ro Counter32 .1.3.6.1.4.1.52.4.2.32.1.1.7 |
ctAgentDhcpServerDECLINEMessagesReceivedThe no. of DHCP messages of type DHCPDECLINE that have been received by the DHCP server.ro Counter32 .1.3.6.1.4.1.52.4.2.32.1.1.8 |
ctAgentDhcpServerRELEASEMessagesReceivedThe no. of DHCP messages of type DHCPRELEASE that have been received by the DHCP server.ro Counter32 .1.3.6.1.4.1.52.4.2.32.1.1.9 |
ctAgentDhcpServerINFORMMessagesReceivedThe no. of DHCP messages of type DHCPINFORM that have been received by the DHCP server.ro Counter32 .1.3.6.1.4.1.52.4.2.32.1.1.10 |
ctAgentDhcpServerOFFERMessagesSentThe no. of DHCP messages of type DHCPOFFER that have been sent by the DHCP server.ro Counter32 .1.3.6.1.4.1.52.4.2.32.1.1.11 |
ctAgentDhcpServerACKMessagesSentThe no. of DHCP messages of type DHCPACK that have been sent by the DHCP server.ro Counter32 .1.3.6.1.4.1.52.4.2.32.1.1.12 |
ctAgentDhcpServerNAKMessagesSentThe no. of DHCP messages of type DHCPNAK that have been sent by the DHCP server.ro Counter32 .1.3.6.1.4.1.52.4.2.32.1.1.13 |
ctAgentDhcpServerClearStatisticsClears the DHCP server statistics.rw Enumeration .1.3.6.1.4.1.52.4.2.32.1.1.14 |
ctAgentDhcpServerBootpAutomaticUsed to enable or disable autmatic address allocation to bootp clients from dynamic address pools.rw Enumeration .1.3.6.1.4.1.52.4.2.32.1.1.15 |
ctAgentDhcpServerPoolConfigGroup OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.2.32.1.2 |
ctAgentDhcpServerPoolNameCreateA pool is created by applying write operation on this MIB object and providing a new pool-name. Get operation on this MIB object returns a null-value, as for the purpose of viewing the pool name, the user should perform the traversal of ctAgentDhcpServerPoolConfigTable. For this reason the get operation on object ctAgentDhcpServerPoolNameCreate becomes insignificant.rw DisplayString .1.3.6.1.4.1.52.4.2.32.1.2.1 |
ctAgentDhcpServerPoolConfigTableA table of the DHCP Server Pool configuration entries. SEQUENCE OF AgentDhcpServerPoolConfigEntry .1.3.6.1.4.1.52.4.2.32.1.2.2 |
ctAgentDhcpServerPoolConfigEntryRepresents entry for a Dhcp server pool. AgentDhcpServerPoolConfigEntry .1.3.6.1.4.1.52.4.2.32.1.2.2.1 |
ctAgentDhcpServerPoolIndexThe Pool Index, which 'll be used as index for the PoolConfig Table.ro Unsigned32 .1.3.6.1.4.1.52.4.2.32.1.2.2.1.1 |
ctAgentDhcpServerPoolNameThe name of the DHCP Address pool. This value cannot be modifiedro DisplayString .1.3.6.1.4.1.52.4.2.32.1.2.2.1.2 |
ctAgentDhcpServerPoolDefRouterThis specifies the default-router list(each default-router is separated by comma and the list is terminated by semi-colon) for a DHCP client, an example would be 10.10.1.1,192.168.36.1,157.227.44.1;(no spaces in between).User should enter a 'null' or 'NULL' string to remove current default-router list.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.52.4.2.32.1.2.2.1.3 |
ctAgentDhcpServerPoolDNSServerThis specifies the DNS IP servers(each DNS IP server is separated by comma and the list is terminated by semi-colon) for a DHCP client, an example would be 10.10.1.1,192.168.36.1,157.227.44.1;(no spaces in between).User should enter a 'null' or 'NULL' string to remove current default-router list.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.52.4.2.32.1.2.2.1.4 |
ctAgentDhcpServerPoolLeaseTimeThis specifies the duration of the lease(in minutes) for an IP address that is assigened from a DHCP server to a DHCP client. For infinite leases, lease-time value will be set to 86400.rw Integer32 .1.3.6.1.4.1.52.4.2.32.1.2.2.1.5 |
ctAgentDhcpServerPoolTypeThis specifies the type of the binding that is associated with this pool.ro Enumeration .1.3.6.1.4.1.52.4.2.32.1.2.2.1.6 |
ctAgentDhcpServerPoolNetbiosNameServerThis specifies the IP address-list of Net BIOS name-servers that are available to DHCP clients (each IP address in this list is separated by comma and the list is terminated by semi-colon), an example would be 10.10.1.1,192.168.36.1,157.227.44.1;(no spaces in between).User should enter a 'null' or 'NULL' string to remove current Net BIOS name-server list.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.52.4.2.32.1.2.2.1.7 |
ctAgentDhcpServerPoolNetbiosNodeTypeThis specifies the NetBIOS node-type for DHCP clients. 'none' is shown if node-type is not set to any of the four values.rw Enumeration .1.3.6.1.4.1.52.4.2.32.1.2.2.1.8 |
ctAgentDhcpServerPoolNextServerThis configures the next server in the boot-process of a DHCP clients.User should enter zero(0.0.0.0) to remove the current Next-server addressrw IpAddress .1.3.6.1.4.1.52.4.2.32.1.2.2.1.9 |
ctAgentDhcpServerPoolDomainNameThis specifies the domain-name for a DHCP client. User should enter a 'null' or 'NULL' string to remove specified domain-name.rw DisplayString .1.3.6.1.4.1.52.4.2.32.1.2.2.1.10 |
ctAgentDhcpServerPoolBootfileThis specifies the name of the default boot image for a DHCP client.User should enter a 'null' or 'NULL' string to remove specified bootfile name.rw DisplayString .1.3.6.1.4.1.52.4.2.32.1.2.2.1.11 |
ctAgentDhcpServerPoolRowStatusThe row status variable is used according to installation and removal conventions for conceptual rows. When a pool is created by applying write operation on 'ctAgentDhcpServerPoolCreateName',row-status becomes 'active'. If row-status for a poolEntry is set to 'destroy', the corresponding pool gets deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.52.4.2.32.1.2.2.1.12 |
ctAgentDhcpServerPoolAllocationTableA table of the DHCP Server's pool entries, showing the binding(dynamic/manual) specific parameters. SEQUENCE OF AgentDhcpServerPoolAllocationEntry .1.3.6.1.4.1.52.4.2.32.1.2.3 |
ctAgentDhcpServerPoolAllocationEntryRepresents entry for a Dhcp server's allocation pool. AgentDhcpServerPoolAllocationEntry .1.3.6.1.4.1.52.4.2.32.1.2.3.1 |
ctAgentDhcpServerPoolAllocationNameThis specifies name of the DHCP Address pool having dynamic binding. This value is same as ctAgentDhcpServerPoolName of the ctAgentDhcpServerPoolConfigTable.ro DisplayString .1.3.6.1.4.1.52.4.2.32.1.2.3.1.1 |
ctAgentDhcpServerDynamicPoolIpAddressThe IP address of the DHCP Address pool. The IP address must be set before setting the IP Mask or IP Prefix Length. After setting IP address, network -mask, or IP Prefix length must be set in order to change the pool type to dynamic. This value shows 0.0.0.0, if the binding type is 'un-allocated',or,'manual'.rw IpAddress .1.3.6.1.4.1.52.4.2.32.1.2.3.1.2 |
ctAgentDhcpServerDynamicPoolIpMaskThe bit-combination that renders which portion of the address of the DHCP address pool refers to the network or subnet and which part refers to the host.The IP address must have been set before. This value shows 0.0.0.0, if the binding type is 'un-allocated',or,'manual'.rw IpAddress .1.3.6.1.4.1.52.4.2.32.1.2.3.1.3 |
ctAgentDhcpServerDynamicPoolIpPrefixLengthThis specifies the no. of bits that comprise the address-prefix. The prefix is an alternative way of specifying the network-mask of the client.The IP address must have been set before. This value shows 0, if the binding type is 'un-allocated',or,'mnaual'.rw Unsigned32 .1.3.6.1.4.1.52.4.2.32.1.2.3.1.4 |
ctAgentDhcpServerPoolAllocationTypeThis specifies the type of the binding that is associated with this pool.ro Enumeration .1.3.6.1.4.1.52.4.2.32.1.2.3.1.5 |
ctAgentDhcpServerManualPoolClientIdentifierIt specifies the unique identifier (in colon separated hexadecimal format) of a DHCP client. It is valid for manual bindings only. It displays 'unconfigured',if the binding type is 'un-allocated',or,'dynamic'. To set this object, input should be 7 octets long with the hardware type in the first octet.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.52.4.2.32.1.2.3.1.6 |
ctAgentDhcpServerManualPoolClientNameIt specifies the name of a DHCP client. Client name should't include domain-name. It displays 'unconfigured',if the binding type is 'un-allocated',or,'dynamic'.rw DisplayString .1.3.6.1.4.1.52.4.2.32.1.2.3.1.7 |
ctAgentDhcpServerManualPoolClientHWAddrIt specifies the hardware-address of a DHCP client. It is valid for manual bindings only. It displays 'unconfigured',if the binding type is 'un-allocated',or,'dynamic'. After hardware-address, hardware-type will be configured.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.52.4.2.32.1.2.3.1.8 |
ctAgentDhcpServerManualPoolClientHWTypeIt specifies the hardware-type of a DHCP client. It is valid for manual bindings only. It displays 'unconfigured',if the binding type is 'un-allocated',or,'dynamic'. Before this, hardware-address must be configured.rw Enumeration .1.3.6.1.4.1.52.4.2.32.1.2.3.1.9 |
ctAgentDhcpServerManualPoolIpAddressThe IP address of the DHCP Address pool for manual binding. The IP address must be set before setting the IP Mask or IP Prefix Length.After setting IP address, network -mask, or IP Prefix length must be set in order to change the pool type to dynamic. This value shows 0.0.0.0, if the binding type is 'un-allocated',or,'dynamic'.rw IpAddress .1.3.6.1.4.1.52.4.2.32.1.2.3.1.10 |
ctAgentDhcpServerManualPoolIpMaskThe bit-combination that renders which portion of the address of the DHCP address pool for a manual binding refers to the network or subnet and which part refers to the host. The IP address must have been set before. This value shows 0.0.0.0, if the binding type is 'un-allocated',or,'dynamic'.rw IpAddress .1.3.6.1.4.1.52.4.2.32.1.2.3.1.11 |
ctAgentDhcpServerManualPoolIpPrefixLengthThis specifies the no. of bits that comprise the address-prefix. The prefix is an alternative way of specifying the network-mask of the client.The IP address must have been set before. This value shows 0, if the binding type is 'un-allocated',or,'dynamic'.rw Unsigned32 .1.3.6.1.4.1.52.4.2.32.1.2.3.1.12 |
ctAgentDhcpServerExcludedAddressRangeCreateIt sets the IP address-ranges(from low to high) that a DHCP server should not assign to DHCP clients. Each time this MIB object is set successfully, one excluded range of IP address will be set. It is given in format - start and end IP address separated by '-' and terminated by ';'. One example would be - 192.168.36.1-200.1.1.1; . This sets one excluded range of IP address,which starts at 192.168.36.1 and ends at 200.1.1.1. If only start IP address is given, end IP address is assumed to be equal to the start IP address. Get operation on this MIB object returns a null-value, as for the purpose of viewing the exclude-address ranges, the user should perform the traversal of ctAgentDhcpServerExcludedAddressRangeTable. For this reason the get operation on object ctAgentDhcpServerExcludedAddressRangeCreate becomes insignificant.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.52.4.2.32.1.2.4 |
ctAgentDhcpServerExcludedAddressRangeTableA table of the DHCP Server Pool configuration entries. SEQUENCE OF AgentDhcpServerExcludedAddressRangeEntry .1.3.6.1.4.1.52.4.2.32.1.2.5 |
ctAgentDhcpServerExcludedAddressRangeEntryRepresents entry for a Dhcp server excluded address range table. AgentDhcpServerExcludedAddressRangeEntry .1.3.6.1.4.1.52.4.2.32.1.2.5.1 |
ctAgentDhcpServerExcludedRangeIndexThis specifies the index of the excluded IP address-range table.ro Unsigned32 .1.3.6.1.4.1.52.4.2.32.1.2.5.1.1 |
ctAgentDhcpServerExcludedStartIpAddressThis specifies the starting IP address of the excluded address-range.ro IpAddress .1.3.6.1.4.1.52.4.2.32.1.2.5.1.2 |
ctAgentDhcpServerExcludedEndIpAddressThis specifies the ending IP address of the excluded address-range.ro IpAddress .1.3.6.1.4.1.52.4.2.32.1.2.5.1.3 |
ctAgentDhcpServerExcludedAddressRangeStatusThis specifies the row-status of the excluded address-range. Implemented values are - active(1) and destroy(6). For a valid range, the row-satus will return active(1). When it is set to destroy(6), the corresponding address-range is deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.52.4.2.32.1.2.5.1.4 |
ctAgentDhcpServerPoolOptionCreateThis sets the option for an existing DHCP Server pool. Here, it is required to enter the pool-index, for which option is to be set and the value of the DHCP option code in string-format : pool-index and option code separated by '-' and terminated by ';', one example would be -> 1-19; , 1 is the pool-index and 19 is the option code.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.52.4.2.32.1.2.6 |
ctAgentDhcpServerPoolOptionTableA table for configuring DHCP Server options. SEQUENCE OF AgentDhcpServerPoolOptionEntry .1.3.6.1.4.1.52.4.2.32.1.2.7 |
ctAgentDhcpServerPoolOptionEntryRepresents entry for a Dhcp server option table. AgentDhcpServerPoolOptionEntry .1.3.6.1.4.1.52.4.2.32.1.2.7.1 |
ctAgentDhcpServerPoolOptionIndexThe Pool Index alongwith option-code, acts as index for the DHCP Server Option table.ro Unsigned32 .1.3.6.1.4.1.52.4.2.32.1.2.7.1.1 |
ctAgentDhcpServerPoolOptionCodeThis specifies the DHCP option code. This alongwith pool-index acts as the index of the DHCP Server Option table.rw Unsigned32 .1.3.6.1.4.1.52.4.2.32.1.2.7.1.2 |
ctAgentDhcpServerOptionPoolNameThe name of the DHCP Address pool. This value cannot be modifiedro DisplayString .1.3.6.1.4.1.52.4.2.32.1.2.7.1.3 |
ctAgentDhcpServerPoolOptionAsciiDataThis specifies an NVT ASCII character string. ASCII character strings that contain white space must be delimited by quotation marks. If an ascii optiondata is entered again, it gets concatenated with the previous ascii data.rw DisplayString .1.3.6.1.4.1.52.4.2.32.1.2.7.1.4 |
ctAgentDhcpServerPoolOptionHexDataThis specifies semi-colon separated hexadecimal data. Two hexadecimal digits in hexadecimal character string represents one byte . Hexadecimal strings can be entered in the following formats : 1) continuous hexadecimal digits like -- 0123456789abcdef 2) hexadecimal digits separated by space ' ' -- 01 23 45 67 de 0f 3) Two hexadecimal digits separated by delimeter ':' -- 01:02:a0 de:0f 78:5e 4) Four hexadecimal digits separated by delimeter '.' -- 01ab.c0de.7865 If a Hex optiondata is entered again, it gets concatenated with the previous Hex data.rw DisplayString .1.3.6.1.4.1.52.4.2.32.1.2.7.1.5 |
ctAgentDhcpServerPoolOptionIpAddressDataThis specifies the IP-address list(each IP-address is separated by comma and the list is terminated by semi-colon) for a DHCP client, an example would be 10.10.1.1,192.168.36.1,157.227.44.1;(no spaces in between). If a IP option is entered again, it gets concatenated with the previous IP data. Maximum no. of IP addresses that can be entered at one time is 8.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.52.4.2.32.1.2.7.1.6 |
ctAgentDhcpServerPoolOptionStatusThis specifies the row-status of the DHCP Server Pool option.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.52.4.2.32.1.2.7.1.7 |
ctAgentDhcpServerLeaseGroup OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.2.32.1.3 |
ctAgentDhcpServerLeaseClearAllBindingsClears All the DHCP server bindings.rw Enumeration .1.3.6.1.4.1.52.4.2.32.1.3.1 |
ctAgentDhcpServerLeaseTableA table of the DHCP Server's Lease entries. SEQUENCE OF AgentDhcpServerLeaseEntry .1.3.6.1.4.1.52.4.2.32.1.3.2 |
ctAgentDhcpServerLeaseEntryRepresents entry for a Dhcp server's leases. AgentDhcpServerLeaseEntry .1.3.6.1.4.1.52.4.2.32.1.3.2.1 |
ctAgentDhcpServerLeaseIPAddressThis specifies the IP address leased to the client.ro IpAddress .1.3.6.1.4.1.52.4.2.32.1.3.2.1.1 |
ctAgentDhcpServerLeaseIPMaskThis specifies the IP mask of the address leased to the client.ro IpAddress .1.3.6.1.4.1.52.4.2.32.1.3.2.1.2 |
ctAgentDhcpServerLeaseHWAddressThis specifies the hardware address of the client.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.52.4.2.32.1.3.2.1.3 |
ctAgentDhcpServerLeaseRemainingTimeThis specifies the period for which the lease is valid. It is displayed in days, hours, minutes, and seconds.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.52.4.2.32.1.3.2.1.4 |
ctAgentDhcpServerLeaseTypeThis specifies the type of address lease as Automatic or Manual.ro Enumeration .1.3.6.1.4.1.52.4.2.32.1.3.2.1.5 |
ctAgentDhcpServerLeaseStatusThis specifies the row-status of the address-lease. Implemented values are - active(1) and destroy(6). For a valid range, the row-satus will return active(1). When it is set to destroy(6), the corresponding address-lease is cleared.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.52.4.2.32.1.3.2.1.6 |
ctAgentDhcpServerAddressConflictGroup OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.2.32.1.4 |
ctAgentDhcpServerClearAllAddressConflictsClears all the address-conflicts found by DHCP server,when set to enable.rw Enumeration .1.3.6.1.4.1.52.4.2.32.1.4.1 |
ctAgentDhcpServerAddressConflictLoggingIt is used to enable, or disables the logging of address-conflicts on a DHCP Server.rw Enumeration .1.3.6.1.4.1.52.4.2.32.1.4.2 |
ctAgentDhcpServerAddressConflictTableA table of the conflicting-address entries. SEQUENCE OF AgentDhcpServerAddressConflictEntry .1.3.6.1.4.1.52.4.2.32.1.4.3 |
ctAgentDhcpServerAddressConflictEntryRepresents a conflicting-address entry. AgentDhcpServerAddressConflictEntry .1.3.6.1.4.1.52.4.2.32.1.4.3.1 |
ctAgentDhcpServerAddressConflictIPThis specifies the conflicting IP address assigned to the client by DHCP server.ro IpAddress .1.3.6.1.4.1.52.4.2.32.1.4.3.1.1 |
ctAgentDhcpServerAddressConflictDetectionTypeThis specifies the address-conflict detection-method.ro Enumeration .1.3.6.1.4.1.52.4.2.32.1.4.3.1.2 |
ctAgentDhcpServerAddressConflictDetectionTimeThis specifies the sysUpTime at which the address-conflict was detected.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.52.4.2.32.1.4.3.1.3 |
ctAgentDhcpServerAddressConflictStatusThis specifies the row-status of the conflicting-address entry. Implemented values are - active(1) and destroy(6). For a valid range, the row-satus will return active(1). When it is set to destroy(6), the corresponding conflicting-address entry is cleared.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.52.4.2.32.1.4.3.1.4 |