CT-DAWANCONN-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for CT-DAWANCONN-MIB.
24
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
24 total| Object Name |
|---|
ctSSA OBJECT IDENTIFIER .1.3.6.1.4.1.52.4497 |
RFC1155-SMI Unknown .1.3.6.1.4.1.52.4497 |
daWanConnection OBJECT IDENTIFIER .1.3.6.1.4.1.52.4497.17 |
daWanNumConnectionsThis is the total number of connection objects currently
in the system.ro INTEGER .1.3.6.1.4.1.52.4497.17.1 |
daWanConnectionTableA list of Demand Access remote WAN connections SEQUENCE OF DaWanConnectionEntry .1.3.6.1.4.1.52.4497.17.2 |
daWanConnectionEntryAn entry containing wan connection information
and statistics. DaWanConnectionEntry .1.3.6.1.4.1.52.4497.17.2.1 |
daWanConnectionIndexThis is the index into this table. This index
uniquely identifies the Connection.ro INTEGER .1.3.6.1.4.1.52.4497.17.2.1.1 |
daWanConnectionIfIndexThis is the ifIndex value of the wan connection group.
If the ifIndex value is unknown, the value of this object
will be zero.ro INTEGER .1.3.6.1.4.1.52.4497.17.2.1.2 |
daWanConnectionStateThis is the state of the Connection.ro Enumeration .1.3.6.1.4.1.52.4497.17.2.1.3 |
daWanConnectionConnectControlThis object controls the desired state of the wan Connection.
Setting this object to connect(1) will initiate the
set of actions to bring the wan Connection to the active
state. Only set the object to connect(1) when the current
value of daWanConnectionState is inactive. Setting this object
to disconnect(2) will initiate the set of actions to bring
the wan Connection to the inactive state. Only set this object
to disconnect(2) when the daWanConnectionState is active.
After setting the Connection to connect(1) or disconnect(2),
refer to daWanConnectionState to determine the state of the
wan Connection. Queries to daWanConnectionConnectControl return
unknown results.rw Enumeration .1.3.6.1.4.1.52.4497.17.2.1.4 |
daWanConnectionConnectTypeThis specifies the type of the wan connection.ro Enumeration .1.3.6.1.4.1.52.4497.17.2.1.5 |
daWanConnectionDeviceIndexThis is the index of the device that is associated with this connection.
This value will be zero if there is no device associated with this device.ro INTEGER .1.3.6.1.4.1.52.4497.17.2.1.6 |
daWanConnectionConnectSpeedThe information transfer speed in bits/second when calling
this peer. The detailed media specific information, e.g. information
type and information transfer rate for ISDN circuits, has to be
extracted from this object. If the transfer speed to be used is
unknown the value of this object may be zero.ro Gauge .1.3.6.1.4.1.52.4497.17.2.1.7 |
daWanConnectionLocalAddressCall Address at which the connection will originate from. Think of this
as the set of characters following 'ATDT ' or the 'phone number' included in
a D channel call request. The structure of this information will be
switch type specific. If there is no address information required
for reaching the peer, i.e., for leased lines, this object will be a
zero length string.ro DisplayString .1.3.6.1.4.1.52.4497.17.2.1.8 |
daWanConnectionPeerAddressCalling Party Number information element, as for example passed in an
ISDN SETUP message by a PBX or switch, for incoming calls. This address
can be used to identify the peer. If this address is either unknown or
identical to daWanConnectionLocalAddress, this object will be
a zero length string.ro DisplayString .1.3.6.1.4.1.52.4497.17.2.1.9 |
daWanConnectionSubAddressSubaddress at which the connection will originate from. If the subaddress is
undefined for the given media or unused, then the value is zero.ro DisplayString .1.3.6.1.4.1.52.4497.17.2.1.10 |
daWanConnectionInfoTypeThe Information Transfer Capability to be used for this connection.
speech(2) refers to a non-data connection, whereas audio31(6) and
audio7(7) refer to data mode connections.ro Enumeration .1.3.6.1.4.1.52.4497.17.2.1.11 |
daWanConnectionChargedUnitsThe number of charged units for this connection. For incoming calls or
if charging information is not supplied by the switch, the value of
this object will be zero.ro INTEGER .1.3.6.1.4.1.52.4497.17.2.1.12 |
daWanConnectionConnectTimeThe value of sysUpTime when this connection was completed. This
object will be updated whenever a call is completed.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.52.4497.17.2.1.13 |
daWanConnectionConnectDirectionThe direction from which this connect occurred.ro Enumeration .1.3.6.1.4.1.52.4497.17.2.1.14 |
daWanConnectionDisconnectTimeThe value of sysUpTime when this call was disconnected. This object
will be updated whenever a call is disconnected.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.52.4497.17.2.1.15 |
daWanConnectionDisconnectDirectionThe direction from which this disconnect occurred.ro Enumeration .1.3.6.1.4.1.52.4497.17.2.1.16 |
daWanConnectionDisconnectCauseThe encoded network cause value associated with this call. This object
will be updated whenever a call is started or cleared. The value of this
object will depend on the interface type as well as on the protocol and
protocol version being used on this interface.ro INTEGER .1.3.6.1.4.1.52.4497.17.2.1.17 |
daWanConnectionDisconnectTextASCII text describing the reason for this call termination. This object
exists because it would be impossible for a management station to store all
possible cause values for all types of interfaces. It should be used only if
a management station is unable to decode the value of
daWanConnectionDisconnectCause. This object will be updated whenever a
call is started or cleared.ro DisplayString .1.3.6.1.4.1.52.4497.17.2.1.18 |