CT-DAREGISTRY-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for CT-DAREGISTRY-MIB.
10
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
10 total| Object Name |
|---|
ctSSA OBJECT IDENTIFIER .1.3.6.1.4.1.52.4497 |
RFC1155-SMI Unknown .1.3.6.1.4.1.52.4497 |
ctDARegistryTableA list of Demand Access WAN firmware components. Unknown .1.3.6.1.4.1.52.4497.1 |
ctDARegistryEntryAn entry containing management information applicable
to a particular subsystem. CtDARegistryEntry .1.3.6.1.4.1.52.4497.1.1 |
ctDARegistryIndexThis is the category for this object.ro INTEGER .1.3.6.1.4.1.52.4497.1.1.1 |
ctDARegistryInstanceThis is a unique instance within the category for this
object.ro INTEGER .1.3.6.1.4.1.52.4497.1.1.2 |
ctDARegistryAdminStatusThe desired state of the subsystem. The testing(3)
state indicates that no operational functions can be
passed. When a managed system initializes, all
subsystems start with ctDARegistryAdminStatus in the up(1)
state. As a result of either explicit management
action or per configuration information retained by
the managed system, ctDARegistryAdminStatus is then changed
to
either the dowm(2) or testing(3) states (or remains in
the up(1) state).rw Enumeration .1.3.6.1.4.1.52.4497.1.1.3 |
ctDARegistryOperStatusThe mandatory operational state of the subsystem. The
testing(3) state indicates that no operational functions
can be passed. If ctDARegistryAdminStatus is down(2) then
ctDARegistryOperStatus should be down(2). If
ctDARegistryAdminStatus is
changed to up(1) then ctDARegistryOperStatus should change
to
up(1) if the subsystem is ready to function; it should
change to
dormant(5) if the subsystem is waiting for external
actions; it should remain in the down(2)
state if and only if there is a fault that prevents if
from going to the up(1) state. The notPresent state is a
refinement
on the down state which indicates that the relevant
interface is
down specifically because some component (typically, a
hardware
component) is not present in the managed system.
The lowerLayerDown state is also a refinement on the down
state.
This new state indicates that this system runs on top of
one or
more interfaces (see ifStackTable) and that this system
is
down specifically because one or more of these
lower-layer interfaces
are down.ro Enumeration .1.3.6.1.4.1.52.4497.1.1.4 |
ctDARegistryLastChangeThe value of sysUpTime at the time the subsystem
entered its mandatory operational state. If the
mandatory
state was entered prior to the last re-initialization
of the local network management subsystem, then this
object contains a zero value.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.52.4497.1.1.5 |
ctDARegistryDescrA textual string that identifies the subsystem.ro DisplayString .1.3.6.1.4.1.52.4497.1.1.6 |
More MIBs from Cabletron
Browse all CabletronMIBs →CTRON-OIDS
SNMP MIB module
1129 objects→
CTRON-SFCS-MIB
Standard SNMP MIB module defining data structures for CTRON-SFCS-MIB.
490 objects→
CABLETRON-TRAPS
Standard SNMP MIB module defining data structures for CABLETRON-TRAPS.
446 objects→
CTRON-IPX-ROUTER-MIB
SNMP MIB module
435 objects→
ADIC-SANMGR-PROXY-MIB
Standard SNMP MIB module defining data structures for ADIC-SANMGR-PROXY-MIB.
418 objects→
CTRON-AP3000-MIB
The CTRON-AP3000-MIB module enables read-write SNMP configuration management for Enterasys AP3000 wireless access points under the Enterasys enterprise OID. It provides programmatic access to device-specific operational parameters and settings required for provisioning and maintaining the AP3000 hardware.
361 objects→