CT-CMMPHYS-MIB
Detailed view of the defined objects, syntax rules, and hierarchical paths.
89
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
89 total| Object Name |
|---|
cmmModemInfo OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.1.1.18.1 |
IMPORTS Unknown .1.3.6.1.4.1.52.4.1.1.18.1 |
cmmBoardTableA list of CMM boards present in this unit. Unknown .1.3.6.1.4.1.52.4.1.1.18.1.1 |
cmmBoardEntryA CMM board present in this unit. CmmBoardEntry .1.3.6.1.4.1.52.4.1.1.18.1.1.1 |
cmmBoardTypeThe value of this object uniquely defines the CMM
board type - a vendor's authoritative identification
for a module. By convention, this value is allocated
within the SMI enterprises subtree(1.3.6.1.4.1), and
provides an easy and unambiguous means for determining
the type of board.ro OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.1.1.18.1.1.1.1 |
cmmNumModulesThe value of this object is the number of CMM modules
contained on this physical CMM circuit board.ro INTEGER .1.3.6.1.4.1.52.4.1.1.18.1.1.1.2 |
cmmModuleNumModemsNumber of modems per CMM module.ro INTEGER .1.3.6.1.4.1.52.4.1.1.18.1.1.1.3 |
cmmTFTPServerThe value of this object is the IP address of the TFTP
server where the object code for CMM modules resides.
This object is persistent.rw IpAddress .1.3.6.1.4.1.52.4.1.1.18.1.1.1.4 |
cmmUpgradePathThe value of this object is the path to the object code
for CMM modules on the TFTP server. This object is
persistent.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.52.4.1.1.18.1.1.1.5 |
cmmUpgradeFlagThe value of this object is a flag that indicates whether
or not to upgrade the software for the CMM modules on the
board. This object is persistent.rw Enumeration .1.3.6.1.4.1.52.4.1.1.18.1.1.1.6 |
cmmCommitFlagThe value of this object is a flag that indicates whether
or not to commit the software for the CMM modules on the
board. This object is persistent.rw Enumeration .1.3.6.1.4.1.52.4.1.1.18.1.1.1.7 |
cmmModemResetLimitThe value of this object is the number of times that a
modem can be reset within a given time span before it is
declared to be faulty. If the value is 0 then the modem
will never be declared faulty. This object is persistent.rw INTEGER .1.3.6.1.4.1.52.4.1.1.18.1.1.1.8 |
cmmModemResetTimeThe value of this object is the time span (in minutes)
during which the given number of resets must occur before
the modem is declared to be faulty. This object is
persistent.rw INTEGER .1.3.6.1.4.1.52.4.1.1.18.1.1.1.9 |
cmmOutgoingInactivityTimeoutThe value of this object is the duration (in seconds) of a
period of inactivity before an outgoing call is terminated.
This object is persistent.rw INTEGER .1.3.6.1.4.1.52.4.1.1.18.1.1.1.10 |
cmmIncomingInactivityTimeoutThe value of this object is the duration (in seconds) of a
period of inactivity before an incoming call is terminated.
This object is persistent.rw INTEGER .1.3.6.1.4.1.52.4.1.1.18.1.1.1.11 |
cmmAsyncBaseOrigATCmdStrThe value of this object is the default or base set of AT
commands to be used when originating an async call.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.52.4.1.1.18.1.1.1.12 |
cmmAsyncBaseAnswerATCmdStrThe value of this object is the default or base set of AT
commands to be used when answering an async call.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.52.4.1.1.18.1.1.1.13 |
cmmAsyncOrigStrModifierThe value of this object is a set of additional AT commands
to be used when originating an async call. This object is
persistent.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.52.4.1.1.18.1.1.1.14 |
cmmAsyncAnswerStrModifierThe value of this object is a set of additional AT commands
to be used when answering an async call. This object is
persistent.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.52.4.1.1.18.1.1.1.15 |
cmmAsyncOperOrigATCmdStrThe value of this object is the operative set of AT commands
to be used when originating an async call. It includes the
base string, the modifier string, and the call timeout value.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.52.4.1.1.18.1.1.1.16 |
cmmAsyncOperAnswerATCmdStrThe value of this object is the operative set of AT commands
to be used when answering an async call. It includes the
base string, the modifier string, and the call timeout value.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.52.4.1.1.18.1.1.1.17 |
cmmHdlcBaseOrigATCmdStrThe value of this object is the default or base set of AT
commands to be used when originating an HDLC call.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.52.4.1.1.18.1.1.1.18 |
cmmHdlcBaseAnswerATCmdStrThe value of this object is the default or base set of AT
commands to be used when answering an HDLC call.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.52.4.1.1.18.1.1.1.19 |
cmmHdlcOrigStrModifierThe value of this object is a set of additional AT commands
to be used when originating an HDLC call. This object is
persistent.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.52.4.1.1.18.1.1.1.20 |
cmmHdlcAnswerStrModifierThe value of this object is a set of additional AT commands
to be used when answering an HDLC call. This object is
persistent.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.52.4.1.1.18.1.1.1.21 |
cmmHdlcOperOrigATCmdStrThe value of this object is the operative set of AT commands
to be used when originating an HDLC call. It includes the
base string, the modifier string, and the call timeout value.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.52.4.1.1.18.1.1.1.22 |
cmmHdlcOperAnswerATCmdStrThe value of this object is the operative set of AT commands
to be used when answering an HDLC call. It includes the
base string, the modifier string, and the call timeout value.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.52.4.1.1.18.1.1.1.23 |
cmmBoardAdminStatusThe value of this object is the administrative status
of the CMM board.
down(1)
removed from service immediately
leave-service(2)
to be removed from service at the completion
of its current call, if any
up(3)
available for accepting calls
upgrade(4)
reloaded with new software and restartedrw Enumeration .1.3.6.1.4.1.52.4.1.1.18.1.1.1.24 |
cmmBoardOperStatusThe value of this object is the operational status of
the CMM board.
initializing(1)
up or in the process of a software upgrade
active(2)
for accepting calls
leaving-service(3)
functional but are no longer available for
accepting calls (Existing calls are allowed
to terminate normally.)
out-of-service(4)
are available for accepting calls nor do they
have any existing calls
faulty(5)
impaired(6)
modules are in the out-of-service, initializing,
testing, faulty, or impaired statesro Enumeration .1.3.6.1.4.1.52.4.1.1.18.1.1.1.25 |
cmmModuleTableA list of CMM modules present on each CMM board in this unit SEQUENCE OF CmmModuleEntry .1.3.6.1.4.1.52.4.1.1.18.1.2 |
cmmModuleEntryThe value of this object is a CMM module that is
present in this unit CmmModuleEntry .1.3.6.1.4.1.52.4.1.1.18.1.2.1 |
cmmModuleIDThe value of this object is an index that uniquely identifies
the CMM module within the physical CMM board.ro INTEGER .1.3.6.1.4.1.52.4.1.1.18.1.2.1.1 |
cmmDpramSizeSize of the DPRAM (in bytes) on the CMM module.ro INTEGER .1.3.6.1.4.1.52.4.1.1.18.1.2.1.2 |
cmmSdramSizeSize of the SDRAM (in bytes) on the CMM module.ro INTEGER .1.3.6.1.4.1.52.4.1.1.18.1.2.1.3 |
cmmCpuTypeCPU type on the CMM module.ro Enumeration .1.3.6.1.4.1.52.4.1.1.18.1.2.1.4 |
cmmCpuSpeedThe speed of the CPU (in Megahertz) on the CMM module.ro INTEGER .1.3.6.1.4.1.52.4.1.1.18.1.2.1.5 |
cmmCpuFwRevRevision of the CPU firmware on the CMM module. This code
is a product of RSA.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.52.4.1.1.18.1.2.1.6 |
cmmEpldIdEPLD ID on the CMM module. (Read from the Altera chip.)ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.52.4.1.1.18.1.2.1.7 |
cmmEpldRevRevision of the EPLD firmware on the CMM module. This
code is produced by Cabletron.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.52.4.1.1.18.1.2.1.8 |
cmmNumBadModemsThe value of this object is the number of bad modems
on the CMM module.ro INTEGER .1.3.6.1.4.1.52.4.1.1.18.1.2.1.9 |
cmmModuleAdminStatusThe value of this object is the administrative status
of the CMM module.
down(1)
removed from service immediately
leave-service(2)
to be removed from service at the completion
of its current call, if any
up(3)
available for accepting calls
run-diagnostics(4)
to run a series of comprehensive on-line
diagnostic tests
reset(5)
faulty(6)
service and considered unusablerw Enumeration .1.3.6.1.4.1.52.4.1.1.18.1.2.1.10 |
cmmModuleOperStatusThe value of this object is the operational status of
the CMM module.
initializing(1)
a software upgrade
active(2)
for accepting calls
leaving-service(3)
functional but are no longer available for
accepting calls (Existing calls are allowed
to terminate normally.)
out-of-service(4)
are available for accepting calls nor do they
have any existing calls
faulty(5)
is considered to be unusable
impaired(6)
modems are in the out-of-service, initializing,
testing, or faulty statesro Enumeration .1.3.6.1.4.1.52.4.1.1.18.1.2.1.11 |
cmmModemTableA list of modems present on each CMM module on each CMM board
in this unit SEQUENCE OF CmmModemEntry .1.3.6.1.4.1.52.4.1.1.18.1.3 |
cmmModemEntryThis object contains data for a single CMM modem. CmmModemEntry .1.3.6.1.4.1.52.4.1.1.18.1.3.1 |
cmmBoardIDThis object contains the logical number of the CMM board to which
the modem belongs.ro INTEGER .1.3.6.1.4.1.52.4.1.1.18.1.3.1.1 |
cmmModemIDThis object contains the logical number of the modem on the CMM
module to which the modem belongs.ro INTEGER .1.3.6.1.4.1.52.4.1.1.18.1.3.1.2 |
cmmIFNumThis object contains the number of the instance of the Interface
MIB that is associated with this modem.ro INTEGER .1.3.6.1.4.1.52.4.1.1.18.1.3.1.3 |
cmmSessionNumThis object contains the session number that is associated with
this modem. Session numbers are assigned, starting with 1, from
the first modem on the first module of the first CMM board and
continuing through the last modem of the last module of the last
CMM board.ro INTEGER .1.3.6.1.4.1.52.4.1.1.18.1.3.1.4 |
cmmDdpPartNumPart number of the DDP controller on the CMM module.
(Read from the DDP chip.)ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.52.4.1.1.18.1.3.1.5 |
cmmDdpRevLevelRevision level of the DDP controller on the CMM module.
(Read from the DDP chip.)ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.52.4.1.1.18.1.3.1.6 |
cmmDdpFwRevRevison of the DDP controller firmware on the CMM module.
This code is produced by Rockwell.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.52.4.1.1.18.1.3.1.7 |
cmmDDPInterruptsThis object contains the number of interrupts received by the CMM
transfer manager since initialization.ro Counter .1.3.6.1.4.1.52.4.1.1.18.1.3.1.8 |
cmmRxFlowCtlEvtsThis object contains the number of received flow control events.rw Counter .1.3.6.1.4.1.52.4.1.1.18.1.3.1.9 |
cmmTxFlowCtlEvtsThis object contains the number of transmitted flow control events.rw Counter .1.3.6.1.4.1.52.4.1.1.18.1.3.1.10 |
cmmCallStatusThis object contains the current call status.rw Enumeration .1.3.6.1.4.1.52.4.1.1.18.1.3.1.11 |
cmmCallOriginThis object contains an enumerated value that indicates whether
the call originated locally or remotely.ro Enumeration .1.3.6.1.4.1.52.4.1.1.18.1.3.1.12 |
cmmRobbedBitDetectedThis object contains the robbed bit signalling pattern that was
detected by the modem or 0 if none.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.52.4.1.1.18.1.3.1.13 |
cmmCorrectionTypeThis object contains an enumerated value that indicates the type
of error correction that was negotiated.ro Enumeration .1.3.6.1.4.1.52.4.1.1.18.1.3.1.14 |
cmmCompressionTypeThis object contains an enumerated value that indicates the type
of data compression that was negotiated.ro Enumeration .1.3.6.1.4.1.52.4.1.1.18.1.3.1.15 |
cmmRxRateThis object contains the current receive rate.ro INTEGER .1.3.6.1.4.1.52.4.1.1.18.1.3.1.16 |
cmmTxRateThis object contains the current transmit rate.ro INTEGER .1.3.6.1.4.1.52.4.1.1.18.1.3.1.17 |
cmmEncodingThis object contains the current PCM encoding type.ro Enumeration .1.3.6.1.4.1.52.4.1.1.18.1.3.1.18 |
cmmFramingThis object contains the current framing type.ro Enumeration .1.3.6.1.4.1.52.4.1.1.18.1.3.1.19 |
cmmInitialConnectRateThis object contains the initial connect rate (in BPS) or the session.ro INTEGER .1.3.6.1.4.1.52.4.1.1.18.1.3.1.20 |
cmmMaxHostWindowsThis object contains the maximum number of host windows.ro INTEGER .1.3.6.1.4.1.52.4.1.1.18.1.3.1.21 |
cmmMaxCmmWindowsThis object contains the maximum number of CMM windows.ro INTEGER .1.3.6.1.4.1.52.4.1.1.18.1.3.1.22 |
cmmNumOutHostAcksThis object contains the number of host window acks that
have not been processed by the CMM side.ro Gauge .1.3.6.1.4.1.52.4.1.1.18.1.3.1.23 |
cmmNumOutCmmAcksThis object contains the number of CMM window acks that
have not been processed by the host side.ro Gauge .1.3.6.1.4.1.52.4.1.1.18.1.3.1.24 |
cmmToNetworkOctetsThis object contains the number of data bytes transmitted
(modem -> central office switch).ro Counter .1.3.6.1.4.1.52.4.1.1.18.1.3.1.25 |
cmmFromNetworkOctetsThis object contains the number of data bytes received
(central office switch -> modem).ro Counter .1.3.6.1.4.1.52.4.1.1.18.1.3.1.26 |
cmmToHostOctetsThis object contains the number of data bytes transmitted
(modem -> m-bus host).ro Counter .1.3.6.1.4.1.52.4.1.1.18.1.3.1.27 |
cmmFromHostOctetsThis object contains the number of data bytes received
(m-bus host -> modem).ro Counter .1.3.6.1.4.1.52.4.1.1.18.1.3.1.28 |
cmmToNetworkFramesThis object contains the number of frames transmitted
(modem -> central office switch).ro Counter .1.3.6.1.4.1.52.4.1.1.18.1.3.1.29 |
cmmFromNetworkFramesThis object contains the number of frames received
(central office switch -> modem).ro Counter .1.3.6.1.4.1.52.4.1.1.18.1.3.1.30 |
cmmOversizeFramesThis object contains the number of HDLC frames received that were
greater than the maximum permissible size.ro Counter .1.3.6.1.4.1.52.4.1.1.18.1.3.1.31 |
cmmOverrunErrorsThis object contains the number of HDLC overrun errors.ro Counter .1.3.6.1.4.1.52.4.1.1.18.1.3.1.32 |
cmmCRCErrorsThis object contains the number of HDLC CRC errors.ro Counter .1.3.6.1.4.1.52.4.1.1.18.1.3.1.33 |
cmmAbortedFramesThis object contains the number of HDLC frames that were aborted
while they were being received.ro Counter .1.3.6.1.4.1.52.4.1.1.18.1.3.1.34 |
cmmRetrainEventsThis object contains the number of times that retrain and
renegotiation events have occurred since initialization.ro Counter .1.3.6.1.4.1.52.4.1.1.18.1.3.1.35 |
cmmARAEventsThis object contains the number of times that automatic
rate adaption events have occurred.ro Counter .1.3.6.1.4.1.52.4.1.1.18.1.3.1.36 |
cmmARAFlagThis object contains a flag that indicates whether or not
an ARA event has occurred during the current session.ro Enumeration .1.3.6.1.4.1.52.4.1.1.18.1.3.1.37 |
cmmCarrierLossEventsThis object contains the number of times that carrier loss
events have occurred.ro Counter .1.3.6.1.4.1.52.4.1.1.18.1.3.1.38 |
cmmCarrierLossFlagThis object contains a flag that indicates whether or not a
carrier loss event has occurred during the current session.ro Enumeration .1.3.6.1.4.1.52.4.1.1.18.1.3.1.39 |
cmmRcvSignalLevelThis object contains the receive signal level.ro INTEGER .1.3.6.1.4.1.52.4.1.1.18.1.3.1.40 |
cmmRcvSignalEQMThis object contains the receive signal EQM.ro INTEGER .1.3.6.1.4.1.52.4.1.1.18.1.3.1.41 |
cmmTDMSlotThis object contains the number of the TDM slot used by this
session.ro INTEGER .1.3.6.1.4.1.52.4.1.1.18.1.3.1.42 |
cmmResetModemStatsThis object is used to reset the statistics pertaining to
the selected modem. If written with the value 'true', the
statistics will be reset. If written with the value 'false',
no action will be taken. Its value will always be read as
'false'.rw Enumeration .1.3.6.1.4.1.52.4.1.1.18.1.3.1.43 |
cmmModemAdminStatusThis object contains the administrative status of a modem.
down(1)
leave-service(2)
the completion of its current call, if any
up(3)
run-diagnostics(4)
comprehensive on-line diagnostic tests
reset(5)
faulty(6)
service and considered unusablerw Enumeration .1.3.6.1.4.1.52.4.1.1.18.1.3.1.44 |
cmmModemOperStatusThis object contains the operational status of a modem.
initializing(1)
up or in the process of a software upgrade
idle(2)
call in place
active(3)
it already has one in place
leaving-service(4)
available for accepting calls (Existing calls
are allowed to terminate normally.)
out-of-service(5)
calls nor does it have a call in place
testing(6)
diagnostic tests
faulty(7)
due to a hardware or software failure and is considered
to be unusable
resetting(8)
::= { cmmModemEntry 45 }
cmmFreeFormAtCmdGroup OBJECT IDENTIFIER ::= { cmmModemInfo 5 }
cmmATCommand OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-write
STATUS mandatory
DESCRIPTIONro Enumeration .cmmFreeFormAtCmdGroup.4 |