CT-BROADCAST-MIB
Detailed view of the defined objects, syntax rules, and hierarchical paths.
11
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
11 total| Object Name |
|---|
ctBroadcastCtl OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.1.2.13.1 |
IMPORTS Unknown .1.3.6.1.4.1.52.4.1.2.13.1 |
ctBroadcastCtlTableProvides a list of definitions and control objects over
ports. SEQUENCE OF CtBroadcastCtlEntry .1.3.6.1.4.1.52.4.1.2.13.1.1 |
ctBroadcastCtlEntryDefines a particular entry containing objects pertaining to
definition and control over ports. CtBroadcastCtlEntry .1.3.6.1.4.1.52.4.1.2.13.1.1.1 |
ctBroadcastCtlSlotIDThe specific chassis slot to which this broadcast information
pertains.ro INTEGER .1.3.6.1.4.1.52.4.1.2.13.1.1.1.1 |
ctBroadcastCtlInterfaceThe interface for which this broadcast information pertains.ro INTEGER .1.3.6.1.4.1.52.4.1.2.13.1.1.1.2 |
ctBroadcastTotalBroadcastFramesThe returned value represents the total number of
broadcast frames received on the interface since the
device was initialized.ro Counter .1.3.6.1.4.1.52.4.1.2.13.1.1.1.3 |
ctBroadcastPeakBroadcastRateThe peak rate of broadcast frames received on this
interface represented in frames per second.ro INTEGER .1.3.6.1.4.1.52.4.1.2.13.1.1.1.4 |
ctBroadcastPeakBroadcastRateTimeThe time at which the peak broadcast rate occurred. The value
returned will represent system up time at which the peak
occurred.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.52.4.1.2.13.1.1.1.5 |
ctBroadcastPeakBroadcastClearThis object is used to clear the values found in peakBroadcastRate
and peakBroadcastRateTime.
When set with a value of clear(1) the values will be cleared.
When read, a value a value of noClear(2) will be returned.
A set of a value of noClear(2) will have no effect.rw Enumeration .1.3.6.1.4.1.52.4.1.2.13.1.1.1.6 |
ctBroadcastDesiredBroadcastThresholdThe allowable number of received broadcast frames per second
this interface is allowed to forward to/out other interfaces
in the device. Any number of broadcast frames per second above
the desired vlaue will be dropped. The default value for the
interface is the theoretical maximum frames per second for the
interface. The acceptable range covers the theoretical maximum
for all current media forms.rw INTEGER .1.3.6.1.4.1.52.4.1.2.13.1.1.1.7 |