COMMUNITY-MIB
Detailed view of the defined objects, syntax rules, and hierarchical paths.
10
Objects
Active
Status
2
Dependencies
Imported Objects
Objects
10 total| Object Name |
|---|
cabletron OBJECT IDENTIFIER .1.3.6.1.4.1.52 |
RFC1155-SMI Unknown .1.3.6.1.4.1.52 |
commsDevice OBJECT IDENTIFIER .1.3.6.1.4.1.52.1 |
community OBJECT IDENTIFIER .1.3.6.1.4.1.52.1.52 |
communityTableThis table houses the information needed for trivial
authentication and sending traps. SEQUENCE OF CommunityEntry .1.3.6.1.4.1.52.1.52.2 |
communityEntryEach entry contains a community name and access code
for SNMP trivial authentication, an enable/disable
traps option, as well as network and physical
addressing information for traps. CommunityEntry .1.3.6.1.4.1.52.1.52.2.1 |
communityNameThe community name that will be used for trivial
authentication for SNMP get/set requests. This is also
the community name used within an SNMP trap pdu. Each
community name is associated with an access code of
either NO_ACCESS, RO, RW, or SU.rw OCTET STRING .1.3.6.1.4.1.52.1.52.2.1.1 |
communityTrapThis object is checked to determine if traps should be
sent to the corresponding network address associated
with it.
The possible values are:
trapOff (0),
trapOn (1)rw INTEGER .1.3.6.1.4.1.52.1.52.2.1.2 |
communityIPAddrThe network address of the device that will receive
traps from this agent.rw IpAddress .1.3.6.1.4.1.52.1.52.2.1.3 |
communityIndexA unique value for each community entry.ro INTEGER .1.3.6.1.4.1.52.1.52.2.1.4 |
More MIBs from Cabletron
Browse all CabletronMIBs →CTRON-OIDS
SNMP MIB module
1129 objects→
CTRON-SFCS-MIB
Standard SNMP MIB module defining data structures for CTRON-SFCS-MIB.
490 objects→
CABLETRON-TRAPS
Standard SNMP MIB module defining data structures for CABLETRON-TRAPS.
446 objects→
CTRON-IPX-ROUTER-MIB
SNMP MIB module
435 objects→
ADIC-SANMGR-PROXY-MIB
Standard SNMP MIB module defining data structures for ADIC-SANMGR-PROXY-MIB.
418 objects→
CTRON-AP3000-MIB
The CTRON-AP3000-MIB module enables read-write SNMP configuration management for Enterasys AP3000 wireless access points under the Enterasys enterprise OID. It provides programmatic access to device-specific operational parameters and settings required for provisioning and maintaining the AP3000 hardware.
361 objects→