CM-SAT-MIB
AI MIB Summary
The CM-SAT-MIB module enables SNMP-based monitoring and management of Service Activation parameters on ADVA Optical Networking F3 product lines (FSP150CM/CC), specifically tracking service provisioning states and activation status for cable modem termination systems.
This module defines the Service Activation MIB definitions used by the F3 (FSP150CM/CC) product lines. Copyright (C) ADVA Optical Networking.
Main OID:
cmServiceActivationMIB.1.3.6.1.4.1.2544.1.12.28
126
Objects
Active
Status
9
Dependencies
Imported Objects
Objects
126 total| Object Name |
|---|
cmServiceActivationMIBThis module defines the Service Activation MIB definitions used by
the F3 (FSP150CM/CC) product lines.
Copyright (C) ADVA Optical Networking. MODULE-IDENTITY .1.3.6.1.4.1.2544.1.12.28 |
cmServActivationObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2544.1.12.28.1 |
satControlTableA list of entries for the control of SAT Control. SEQUENCE OF SatControlEntry .1.3.6.1.4.1.2544.1.12.28.1.1 |
satControlEntryA conceptual row in the satControlTable. SatControlEntry .1.3.6.1.4.1.2544.1.12.28.1.1.1 |
satControlIndexThe index of the Service Activation Test. Integer32 .1.3.6.1.4.1.2544.1.12.28.1.1.1.1 |
satControlNameThe alias of the Service Activation Test.rw DisplayString .1.3.6.1.4.1.2544.1.12.28.1.1.1.2 |
satControlTestModeThe mode of the Service Activation Test.rw ServiceActivationTestMode .1.3.6.1.4.1.2544.1.12.28.1.1.1.3 |
satControlTestProceduresA List of Service Activation Test procedures.rw SatProceduresList .1.3.6.1.4.1.2544.1.12.28.1.1.1.4 |
satControlConfigTestDurationThe duration of CIR step test, expressed in seconds.rw Integer32 .1.3.6.1.4.1.2544.1.12.28.1.1.1.5 |
satControlConfigCIRTestStepNumThe number of steps in CIR step test.rw Integer32 .1.3.6.1.4.1.2544.1.12.28.1.1.1.6 |
satControlConfigCIRTestStepDurationThe duration of each CIR step test.rw Integer32 .1.3.6.1.4.1.2544.1.12.28.1.1.1.7 |
satControlPerfTestDurationThe duration of the SAT Performance Test, expressed in minutes.rw Integer32 .1.3.6.1.4.1.2544.1.12.28.1.1.1.8 |
satControlStatusThe overall SAT Control Test Status.ro SatStatus .1.3.6.1.4.1.2544.1.12.28.1.1.1.9 |
satControlActionThe start/stop action of the SAT Control.rw SatTestAction .1.3.6.1.4.1.2544.1.12.28.1.1.1.10 |
satControlStorageTypeThe type of storage configured for this entry.rw StorageType (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.28.1.1.1.11 |
satControlRowStatusThe status of this row.
An entry MUST NOT exist in the active state unless all
objects in the entry have an appropriate value, as described
in the description clause for each writable object.
The values of satControlRowStatus supported are
createAndGo(4) and destroy(6). All mandatory attributes
must be specified in a single SNMP SET request with
satControlRowStatus value as createAndGo(4).
Upon successful row creation, this variable has a
value of active(1).
The satControlRowStatus object may be modified if
the associated instance of this object is equal to active(1).rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.28.1.1.1.12 |
satControlFailCauseThe information about the reason of the Test failure.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.28.1.1.1.13 |
satControlTestStartTimeThe start time of this SAT Control.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.28.1.1.1.14 |
satControlFlpduTagOverrideWhether permit user to configure FLPDU explicitly.
Disabled: FLPDUs tag is inherited from SCM of MEP.
Enabled: User can configure FLPDUs tag explicitly, which will override the VLAN tags from MEP.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.28.1.1.1.15 |
satStreamTableA list of entries for the control of SAT Streams. SEQUENCE OF SatStreamEntry .1.3.6.1.4.1.2544.1.12.28.1.2 |
satStreamEntryA conceptual row in the satStreamTable. SatStreamEntry .1.3.6.1.4.1.2544.1.12.28.1.2.1 |
satStreamIndexThe index of the Service Activation Test Stream. Integer32 .1.3.6.1.4.1.2544.1.12.28.1.2.1.1 |
satStreamNameThe alias of the Service Activation Test Stream.rw DisplayString .1.3.6.1.4.1.2544.1.12.28.1.2.1.2 |
satStreamTestPortThe related port of the Service Activation Test Stream.rw VariablePointer (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.28.1.2.1.3 |
satStreamTestDirectionThe direction of the Service Activation Test Stream.rw SatDirection .1.3.6.1.4.1.2544.1.12.28.1.2.1.4 |
satStreamDestMacAddressThis object describes the destination MAC address of FLPDU.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.28.1.2.1.5 |
satStreamFramePayloadTypeThe type of Payload of the Frame Loss PDU.rw SatFramePayloadType .1.3.6.1.4.1.2544.1.12.28.1.2.1.6 |
satStreamCustomFramePayloadThis object describes the customized frame payload.rw DisplayString .1.3.6.1.4.1.2544.1.12.28.1.2.1.7 |
satStreamFrameSizeListThis object describes a list of Frame Sizes used in FLPDU.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.28.1.2.1.8 |
satStreamSacProfileIdThis object describes the related Service Acceptance Criteria (SAC) Profile Id.rw VariablePointer (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.28.1.2.1.9 |
satStreamSrcMepIdThis object describes the Local MEP related with SAT Test Stream.rw VariablePointer (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.28.1.2.1.10 |
satStreamDestMepTypeThis object describes the type of Destination MEP, which can be based on MEP id or MAC Address.rw MepDestinationType (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.28.1.2.1.11 |
satStreamDestMepIdThis object describes the destination MEP id.rw Integer32 .1.3.6.1.4.1.2544.1.12.28.1.2.1.12 |
satStreamDestMepMacAddrThis object describes the Destination MEP's MAC Address.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.28.1.2.1.13 |
satStreamDmmPacketSizeThis object describes the Delay Measurement Message (DMM) frame size.rw Integer32 .1.3.6.1.4.1.2544.1.12.28.1.2.1.14 |
satStreamDmmPacketIntervalThis object describes the Delay Measurement Message (DMM) frame generation interval.rw EsaProbePktIntervalType (CM-SA-MIB) .1.3.6.1.4.1.2544.1.12.28.1.2.1.15 |
satStreamOverallResultThis object describes the test result.ro SatResult .1.3.6.1.4.1.2544.1.12.28.1.2.1.16 |
satStreamActionThis object describes the operation on this test.rw SatTestAction .1.3.6.1.4.1.2544.1.12.28.1.2.1.17 |
satStreamStatusThis object describes the test status of this Test Stream.ro SatStatus .1.3.6.1.4.1.2544.1.12.28.1.2.1.18 |
satStreamCurrentTestProcedureThis object describes the current test procedure.ro SatProceduresType .1.3.6.1.4.1.2544.1.12.28.1.2.1.19 |
satStreamCurrentConfigCirTestStepThis object describes the current step number of CIR Test.ro Integer32 .1.3.6.1.4.1.2544.1.12.28.1.2.1.20 |
satStreamInner1VlanIdThis object describes the Inner1 VLAN Id.rw VlanId (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.28.1.2.1.21 |
satStreamInner1VlanPriThis object describes the Inner1 VLAN Priority.rw VlanPriority (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.28.1.2.1.22 |
satStreamInner1VlanEnabledThis object describes whether the Inner1 VLAN enabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.28.1.2.1.23 |
satStreamInner1ValnEtherTypeThis object describes the Inner2 VLAN EtherType.rw Integer32 .1.3.6.1.4.1.2544.1.12.28.1.2.1.24 |
satStreamInner2VlanIdThis object describes the Inner2 VLAN Id.rw VlanId (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.28.1.2.1.25 |
satStreamInner2VlanPriThis object describes the Inner2 VLAN Priority.rw VlanPriority (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.28.1.2.1.26 |
satStreamInner2VlanEnabledThis object describes whether the Inner2 VLAN enabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.28.1.2.1.27 |
satStreamInner2VlanEtherTypeThis object describes whether the Inner2 VLAN ether type.rw Integer32 .1.3.6.1.4.1.2544.1.12.28.1.2.1.28 |
satStreamOuterVlanIdThis object describes the Outer VLAN Id.rw VlanId (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.28.1.2.1.29 |
satStreamOuterVlanPriThis object describes the Outer VLAN Priority.rw VlanPriority (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.28.1.2.1.30 |
satStreamOuterVlanEnabledThis object describes whether the Outer VLAN enabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.28.1.2.1.31 |
satStreamOuterVlanEtherTypeThis object describes whether the Outer VLAN Ethertype.rw Integer32 .1.3.6.1.4.1.2544.1.12.28.1.2.1.32 |
satStreamDeiEnabledThis object describes whether the DEI enabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.28.1.2.1.33 |
satStreamGreenPcpThis object describes the PCP value for Green Packets.rw Integer32 .1.3.6.1.4.1.2544.1.12.28.1.2.1.34 |
satStreamYellowPcpThis object describes the PCP value for Yellow Packets.rw Integer32 .1.3.6.1.4.1.2544.1.12.28.1.2.1.35 |
satStreamColorModeThis object describes the color mode for Policing test.rw PolicerColorMode (CM-FACILITY-MIB) .1.3.6.1.4.1.2544.1.12.28.1.2.1.36 |
satStreamCirLoThis object describes CIR low 32 bits.rw Unsigned32 .1.3.6.1.4.1.2544.1.12.28.1.2.1.37 |
satStreamCirHiThis object describes CIR high 32 bits.rw Unsigned32 .1.3.6.1.4.1.2544.1.12.28.1.2.1.38 |
satStreamEirLoThis object describes EIR low 32 bits.rw Unsigned32 .1.3.6.1.4.1.2544.1.12.28.1.2.1.39 |
satStreamEirHiThis object describes EIR high 32 bits.rw Unsigned32 .1.3.6.1.4.1.2544.1.12.28.1.2.1.40 |
satStreamCbsThis object describes CBS.rw Unsigned32 .1.3.6.1.4.1.2544.1.12.28.1.2.1.41 |
satStreamEbsThis object describes CBS.rw Unsigned32 .1.3.6.1.4.1.2544.1.12.28.1.2.1.42 |
satStreamStorageTypeThe type of storage configured for this entry.rw StorageType (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.28.1.2.1.43 |
satStreamRowStatusThe status of this row.
An entry MUST NOT exist in the active state unless all
objects in the entry have an appropriate value, as described
in the description clause for each writable object.
The values of satStreamRowStatus supported are
createAndGo(4) and destroy(6). All mandatory attributes
must be specified in a single SNMP SET request with
satStreamRowStatus value as createAndGo(4).
Upon successful row creation, this variable has a
value of active(1).
The satStreamRowStatus object may be modified if
the associated instance of this object is equal to active(1).rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.28.1.2.1.44 |
satStreamDmmPktPriorityThis object describes the Dmm packet priority.rw VlanPriority (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.28.1.2.1.45 |
satStreamMFactorThe M factor is used in test result validation.
It is added to allow for the effect of the traffic policer's CBS and EBS settings and test time.
Roughly, it equals to EBS/Test Duration, user should configure its value based on experience test.rw Unsigned32 .1.3.6.1.4.1.2544.1.12.28.1.2.1.46 |
satResultStatsTableA list of entries for the control of SAT Result Statistics. SEQUENCE OF SatResultStatsEntry .1.3.6.1.4.1.2544.1.12.28.1.3 |
satResultStatsEntryA conceptual row in the satResultStatsTable. SatResultStatsEntry .1.3.6.1.4.1.2544.1.12.28.1.3.1 |
satResultStatsTestTypeThe Test Type of the Service Activation Test. SatProceduresType .1.3.6.1.4.1.2544.1.12.28.1.3.1.1 |
satResultStatsStepNumberThe Test step number of the Service Activation Test. Integer32 .1.3.6.1.4.1.2544.1.12.28.1.3.1.2 |
satResultStatsSessionIdThe session id of the Service Activation Test.ro Unsigned32 .1.3.6.1.4.1.2544.1.12.28.1.3.1.3 |
satResultStatsStartTimeThe start time of the Service Activation Test.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.28.1.3.1.4 |
satResultStatsEndTimeThe end time of the Service Activation Test.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.28.1.3.1.5 |
satResultStatsStatusThe Status of the Service Activation Test.ro SatStatus .1.3.6.1.4.1.2544.1.12.28.1.3.1.6 |
satResultStatsResultThis object describes SAT whether pass.ro SatResult .1.3.6.1.4.1.2544.1.12.28.1.3.1.7 |
satResultStatsMinIRGMeasuredThis object describes the minimum Information Rate (IR) for Green Packets.ro Counter64 .1.3.6.1.4.1.2544.1.12.28.1.3.1.8 |
satResultStatsAvgIRGMeasuredThis object describes the average Information Rate (IR) for Green Packets.ro Counter64 .1.3.6.1.4.1.2544.1.12.28.1.3.1.9 |
satResultStatsMaxIRGMeasuredThis object describes the maximum Information Rate (IR) for Green Packets.ro Counter64 .1.3.6.1.4.1.2544.1.12.28.1.3.1.10 |
satResultStatsMinIRYMeasuredThis object describes the minimum Information Rate (IR) for Yellow Packets.ro Counter64 .1.3.6.1.4.1.2544.1.12.28.1.3.1.11 |
satResultStatsAvgIRYMeasuredThis object describes the average Information Rate (IR) for Yellow Packets.ro Counter64 .1.3.6.1.4.1.2544.1.12.28.1.3.1.12 |
satResultStatsMaxIRYMeasuredThis object describes the maximum Information Rate (IR) for Yellow Packets.ro Counter64 .1.3.6.1.4.1.2544.1.12.28.1.3.1.13 |
satResultStatsFlrGMeasuredThis object describes the Frame Loss Ratio (FLR) for Green Packets.
From the EGX8.2 and GE110 7.1, If its value is 26000001, it means 26.000001% frame lost.
For the earlier release, If its value is 260001, it means 26.0001% frame lost.ro Integer32 .1.3.6.1.4.1.2544.1.12.28.1.3.1.14 |
satResultStatsFlrYMeasuredThis object describes the Frame Loss Ratio (FLR) for Yellow Packets.
From the EGX8.2 and GE110 7.1, If its value is 26000001, it means 26.000001% frame lost.
For the earlier release, If its value is 260001, it means 26.0001% frame lost.ro Integer32 .1.3.6.1.4.1.2544.1.12.28.1.3.1.15 |
satResultStatsFlrGCountsThis object describes the Frame Loss (FL) count for Green Packets.ro Counter64 .1.3.6.1.4.1.2544.1.12.28.1.3.1.16 |
satResultStatsFlrYCountsThis object describes the Frame Loss (FL) count for Yellow Packets.ro Counter64 .1.3.6.1.4.1.2544.1.12.28.1.3.1.17 |
satResultStatsMinFTDGMeasuredThis object describes the minimum Frame Transfer Delay (FTD) for Green Packets.ro Unsigned32 .1.3.6.1.4.1.2544.1.12.28.1.3.1.18 |
satResultStatsAvgFTDGMeasuredThis object describes the average Frame Transfer Delay (FTD) for Green Packets.ro Unsigned32 .1.3.6.1.4.1.2544.1.12.28.1.3.1.19 |
satResultStatsMaxFTDGMeasuredThis object describes the maximum Frame Transfer Delay (FTD) for Green Packets.ro Unsigned32 .1.3.6.1.4.1.2544.1.12.28.1.3.1.20 |
satResultStatsIMinFDVGMeasuredThis object describes the minimum Frame Delay Variation (FDV) for Green Packets.ro Unsigned32 .1.3.6.1.4.1.2544.1.12.28.1.3.1.21 |
satResultStatsIAvgFDVGMeasuredThis object describes the average Frame Delay Variation (FDV) for Green Packets.ro Unsigned32 .1.3.6.1.4.1.2544.1.12.28.1.3.1.22 |
satResultStatsIMaxFDVGMeasuredThis object describes the maximum Frame Delay Variation (FDV) for Green Packets.ro Unsigned32 .1.3.6.1.4.1.2544.1.12.28.1.3.1.23 |
satResultStatsISyncErrorsNumThe number of (time) Synchronization Errors between SAT Control and SAT Responder in the current Test.ro Unsigned32 .1.3.6.1.4.1.2544.1.12.28.1.3.1.24 |
satResultStatsIfNegFLGThis object means whether negative green frame loss.
True: negative loss of green packets occurs, which means receiving more green packets than expected.
False: negative loss of green packets doesn't occur, which means not receiving more green packets than expected.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.28.1.3.1.25 |
satResultStatsIfNegFLYThis object means whether negative yellow frame loss.
True: negative loss of yellow packets occurs, which means receiving more yellow packets than expected.
False: negative loss of yellow packets doesn't occur, which means not receiving more yellow packets than expected.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.28.1.3.1.26 |
satResultStatsAvgIRTThis object describes Average IR of total packets, non distinguishing green or yellow. Only valid for color blind test.ro Counter64 .1.3.6.1.4.1.2544.1.12.28.1.3.1.27 |
satResultStatsFlrTMeasuredThis object describes the Frame Loss Ratio (FLR) for Total Packets.
No distinguish color, negative value means receiving much more packets than expected.
Only valid for color blind test.
If its value is 26000001, it means 26.000001% frame lost.ro Integer32 .1.3.6.1.4.1.2544.1.12.28.1.3.1.28 |
satResultStatsFlTCountsThis object describes the Frame Loss (FL) count for Total Packets.ro Counter64 .1.3.6.1.4.1.2544.1.12.28.1.3.1.29 |
satResultStatsIfNegFLTThis object means whether negative total frame loss.
True: negative loss of green packets occurs, which means receiving more green packets than expected.
False: negative loss of green packets doesn't occur, which means not receiving more green packets than expected.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.28.1.3.1.30 |
satSacProfileTableA list of entries for the control of SAT Service Acceptance Criteria (SAC) Profile. SEQUENCE OF SatSacProfileEntry .1.3.6.1.4.1.2544.1.12.28.1.4 |
satSacProfileEntryA conceptual row in the satSacProfileTable. SatSacProfileEntry .1.3.6.1.4.1.2544.1.12.28.1.4.1 |
satSacProfileIndexThe index of SAT Service Acceptance Criteria (SAC) Profile. Integer32 .1.3.6.1.4.1.2544.1.12.28.1.4.1.1 |
satSacProfileAliasThe alias of SAT Service Acceptance Criteria (SAC) Profile.rw DisplayString .1.3.6.1.4.1.2544.1.12.28.1.4.1.2 |
satSacProfileFLRThe Frame Loss Ratio (FLR) acceptance criteria of this SAC Profile.
From the EGX8.2 and GE110 7.1, If its value is 26000001, it means 26.000001% frame lost.
For the earlier release, If its value is 260001, it means 26.0001% frame lost.rw Integer32 .1.3.6.1.4.1.2544.1.12.28.1.4.1.3 |
satSacProfileFTDThe Frame Transfer Delay (FTD) acceptance criteria of this SAC Profile.rw Unsigned32 .1.3.6.1.4.1.2544.1.12.28.1.4.1.4 |
satSacProfileFDVThe frame transfer delay variation of SAT Service Acceptance Criteria (SAC) Profile.rw Unsigned32 .1.3.6.1.4.1.2544.1.12.28.1.4.1.5 |
satSacProfileStorageTypeThe type of storage configured for this entry.rw StorageType (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.28.1.4.1.6 |
satSacProfileRowStatusThe status of this row.
An entry MUST NOT exist in the active state unless all
objects in the entry have an appropriate value, as described
in the description clause for each writable object.
The values of satSacProfileRowStatus supported are
createAndGo(4) and destroy(6). All mandatory attributes
must be specified in a single SNMP SET request with
satSacProfileRowStatus value as createAndGo(4).
Upon successful row creation, this variable has a
value of active(1).
The satSacProfileRowStatus object may be modified if
the associated instance of this object is equal to active(1).rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.28.1.4.1.7 |
satResponderSessionTableA list of entries for the control of SAT Responder Session. SEQUENCE OF SatResponderSessionEntry .1.3.6.1.4.1.2544.1.12.28.1.5 |
satResponderSessionEntryA conceptual row in the satResponderSessionTable. SatResponderSessionEntry .1.3.6.1.4.1.2544.1.12.28.1.5.1 |
satResponderSessionIndexThe index of the entry. Unsigned32 .1.3.6.1.4.1.2544.1.12.28.1.5.1.1 |
satResponderSessionIdThe id of active test session negotiated between SAT Responder and SAT Control.ro Unsigned32 .1.3.6.1.4.1.2544.1.12.28.1.5.1.2 |
satResponderSessionControlMepMacAddrThis object describes the Control MEP's MAC Address.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.28.1.5.1.3 |
satResponderSessionMepIdThe local MEP Id.ro VariablePointer (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.28.1.5.1.4 |
satResponderSessionStorageTypeThe type of storage configured for this entry.rw StorageType (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.28.1.5.1.5 |
satResponderSessionRowStatusThe status of this row.
An entry MUST NOT exist in the active state unless all
objects in the entry have an appropriate value, as described
in the description clause for each writable object.
The values of satResponderSessionRowStatus supported are
createAndGo(4) and destroy(6). All mandatory attributes
must be specified in a single SNMP SET request with
satResponderSessionRowStatus value as createAndGo(4).
Upon successful row creation, this variable has a
value of active(1).
The satResponderSessionRowStatus object may be modified if
the associated instance of this object is equal to active(1).rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.28.1.5.1.6 |
networkElementSatParamsTableEntries may be auto discovered, or can be explicitly created by
SNMP Manager. Each remotely discovered shelf is represented as
a row in this table. SEQUENCE OF NetworkElementSatParamsEntry .1.3.6.1.4.1.2544.1.12.28.1.6 |
networkElementSatParamsEntryA conceptual row in the networkElementSatParamsTable. NetworkElementSatParamsEntry .1.3.6.1.4.1.2544.1.12.28.1.6.1 |
neSatParamsEtherTypeThis object describes the SAT System EtherType.rw Unsigned32 .1.3.6.1.4.1.2544.1.12.28.1.6.1.1 |
satCfmMepExtTableThis objects describe the SAT responder whether enabled on the MEP. SEQUENCE OF SatCfmMepExtEntry .1.3.6.1.4.1.2544.1.12.28.1.7 |
satCfmMepExtEntryA conceptual row in the satCfmMepExtTable. SatCfmMepExtEntry .1.3.6.1.4.1.2544.1.12.28.1.7.1 |
satCfmMepSatResponderEnabledThis objects describes the SAT Responder whether enabled on the MEP.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.28.1.7.1.1 |
cmServActivationNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.2544.1.12.28.2 |
cmServActivationConformance OBJECT IDENTIFIER .1.3.6.1.4.1.2544.1.12.28.3 |
cmServActivationCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.2544.1.12.28.3.1 |
cmServActivationGroups OBJECT IDENTIFIER .1.3.6.1.4.1.2544.1.12.28.3.2 |