CISCOSB-UDLD-MIB
AI MIB Summary
The CISCOSB-UDLD-MIB enables monitoring and management of UniDirectional Link Detection (UDLD) protocol states and error counters on Cisco Catalyst switches to detect and isolate unidirectional fiber or copper link failures.
This private MIB module for UDLD (Cisco Systems UniDirectional Link Detection Protocol).
Main OID:
rlUdld.1.3.6.1.4.1.9.6.1.101.218
21
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
21 total| Object Name |
|---|
rlUdldThis private MIB module for UDLD (Cisco Systems UniDirectional Link Detection Protocol). MODULE-IDENTITY .1.3.6.1.4.1.9.6.1.101.218 |
rlUdldPortTableThe table holds information for Udld Ethernet ports. SEQUENCE OF RlUdldPortEntry .1.3.6.1.4.1.9.6.1.101.218.1 |
rlUdldPortEntryEntry in the rlUdldPortTable. RlUdldPortEntry .1.3.6.1.4.1.9.6.1.101.218.1.1 |
rlUdldPortIfIndexInterface Index. This variable is the key for udld port table. uniquely identifies the udld port information. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.9.6.1.101.218.1.1.1 |
rlUdldPortAdminModeThis variable identifies port UDLD admin configured mode (normal, aggressive, disable).rw UdldPortMode .1.3.6.1.4.1.9.6.1.101.218.1.1.2 |
rlUdldPortOperModeThis variable identifies port UDLD operational mode (normal, aggressive, disable). for fiber ports it is combination of global mode and port modero UdldPortMode .1.3.6.1.4.1.9.6.1.101.218.1.1.3 |
rlUdldPortDefaultConfigurationThis variable indicates whether tne user configure the udld port. to present (default) or not in port configuration.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.6.1.101.218.1.1.4 |
rlUdldBidirectionalStateThis variable identifies the port UDLD status (shutdown, idle, detection, undetermined, bidirectional).ro UdldPortBidirectionalState .1.3.6.1.4.1.9.6.1.101.218.1.1.5 |
rlUdldNumberOfDetectedNeighborsNumber Of Detected Neighbors for this port.ro INTEGER .1.3.6.1.4.1.9.6.1.101.218.1.1.6 |
rlUdldNeighborTableThe table holds information for Udld Neighbor of ethernet ports. SEQUENCE OF RlUdldNeighborEntry .1.3.6.1.4.1.9.6.1.101.218.2 |
rlUdldNeighborEntryEntry in the rlUdldNeighborTable. RlUdldNeighborEntry .1.3.6.1.4.1.9.6.1.101.218.2.1 |
rlUdldNeighborPortIfIndexInterface Index. This variable is the key for udld port Neighbor table. uniquely identifies the udld port index. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.9.6.1.101.218.2.1.1 |
rlUdldNeighborDeviceIDThe Neighbor Device-ID TLV should contain the switch base MAC address in ACSII format. UdldString .1.3.6.1.4.1.9.6.1.101.218.2.1.2 |
rlUdldNeighborPortIDThe Port-ID TLV should contain the port ACSII name as it is printed in show CLI commands. UdldString .1.3.6.1.4.1.9.6.1.101.218.2.1.3 |
rlUdldNeighborDeviceMACAddressThe Neighbor mac address MacAddress (SNMPv2-TC) .1.3.6.1.4.1.9.6.1.101.218.2.1.4 |
rlUdldNeighborDeviceNameThe Neighbor NeighborDevice Name TLV should contain sysName in ACSII.ro UdldString .1.3.6.1.4.1.9.6.1.101.218.2.1.5 |
rlUdldNeighborMessageTimeThe Neighbor Message Time is from Message Interval TLV. This time interval value used by a neighbor to send UDLD probes after the linkup or detection phases. Its time unit is 1 second.ro INTEGER .1.3.6.1.4.1.9.6.1.101.218.2.1.6 |
rlUdldNeighborLeftLifeTimeThe remaining holdtime for Neighbor entry in cache in seconds.ro INTEGER .1.3.6.1.4.1.9.6.1.101.218.2.1.7 |
rlUdldNeighborCurrentStateThis variable identifies the Neighbor port UDLD current status (Disabled, Enabled, Undefined, Bidirectional).ro UdldNeighborCurrentState .1.3.6.1.4.1.9.6.1.101.218.2.1.8 |
rlUdldGlobalUDLDModeDefine Global UDLD Mode (normal, aggressive, disable)rw UdldGlobalMode .1.3.6.1.4.1.9.6.1.101.218.3 |
rlUdldGlobalMessageTimeDefine global value of the interval between two sent probe messages, use the udld message time command in Global Configuration mode.rw INTEGER .1.3.6.1.4.1.9.6.1.101.218.4 |