Home/Catalog/CISCOSB-Tuning

CISCOSB-Tuning

AI MIB Summary

The CISCOSB-Tuning MIB module provides vendor-specific management access to internal performance tuning parameters and operational thresholds for Cisco Catalyst switch001 hardware. It enables the monitoring and configuration of low-level device optimization settings, such as queue depths, buffer allocations, and traffic shaping profiles, to adjust switching behavior for specific workload requirements.

The private MIB module definition for switch001 device tuning MIB.
Main OID:
rsTunning.1.3.6.1.4.1.9.6.1.101.29
268
Objects
Active
Status
4
Dependencies

Imported Objects

CISCOSB-MIB
SNMPv2-SMI
SNMPv2-TC
CISCOSB-BRIDGEMIBOBJECTS-MIB

Objects

268 total
Object Name
rsTunningThe private MIB module definition for switch001 device tuning MIB.
MODULE-IDENTITY
.1.3.6.1.4.1.9.6.1.101.29
rsHighPriorityThis variable indicates the time interval the forwarding task inside the RS works in High Priority Mode.rw
INTEGER
.1.3.6.1.4.1.9.6.1.101.29.1
rsLowPriorityThis variable indicates the time interval the forwarding task inside the RS works in Low Priority Mode.rw
INTEGER
.1.3.6.1.4.1.9.6.1.101.29.2
rsDbgLevelThis variable indicates the debug level the Router Server works. the range of this variable is 1..100rw
INTEGER
.1.3.6.1.4.1.9.6.1.101.29.3
rsDiagnosticsTableThe diagnostics table of the agent
SEQUENCE OF RsDiagnosticsEntry
.1.3.6.1.4.1.9.6.1.101.29.4
rsDiagnosticsEntryThe row definition for this table.
RsDiagnosticsEntry
.1.3.6.1.4.1.9.6.1.101.29.4.1
rsDiagnosticsRequestIdThe request id of the rejected SNMP request whose diagnostics are specified by this entry. If request id 0xFFFFFFFF is given, the diagnostic of the last rejected SNMP request sent by the querying NMS is returned.ro
INTEGER
.1.3.6.1.4.1.9.6.1.101.29.4.1.1
rsDiagnosticsCodeThe code of the rejected the SNMP request whose diagnostics are specified by this entry. This code may be used to find out the reason for rejection if the diagnostic text is unavailable.ro
INTEGER
.1.3.6.1.4.1.9.6.1.101.29.4.1.2
rsDiagnosticsLocationThe internal location in the SW rejecting the SNMP request whose diagnostics are specified by this entry. This information is available for debugging purposes only and will be returned in GET requests only if rsDbgLevel >= 99.ro
INTEGER
.1.3.6.1.4.1.9.6.1.101.29.4.1.3
rsDiagnosticsTextThe diagnostic text of the rejected SNMP request whose diagnostics are specified by this entry.ro
DisplayString
.1.3.6.1.4.1.9.6.1.101.29.4.1.4
rsConfirmMessagTabThis variable enables the operator to confirm all the message in the event Message Table.rw
INTEGER
.1.3.6.1.4.1.9.6.1.101.29.5
eventMessageTableThe Event Message table of the agent
SEQUENCE OF EventMessageEntry
.1.3.6.1.4.1.9.6.1.101.29.6
eventMessageEntryThe row definition for this table.
EventMessageEntry
.1.3.6.1.4.1.9.6.1.101.29.6.1
eventNumThe event number,the index of this table.ro
INTEGER
.1.3.6.1.4.1.9.6.1.101.29.6.1.1
eventDescThe event discription, this text will include time and severity.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.9.6.1.101.29.6.1.2
reaTunning
OBJECT IDENTIFIER
.1.3.6.1.4.1.9.6.1.101.29.7
reaIpForwardEnableThe Platform will perform fast IP forwarding if only if this variable's value is enable.rw
Enumeration
.1.3.6.1.4.1.9.6.1.101.29.7.4
reaIpxForwardEnableThe Platform will perform fast IPX forwarding if only if this variable's value is enable.rw
Enumeration
.1.3.6.1.4.1.9.6.1.101.29.7.5
rsMaxEntriesTuning
OBJECT IDENTIFIER
.1.3.6.1.4.1.9.6.1.101.29.8
rsMaxBridgeForwardingEntriesTuning
OBJECT IDENTIFIER
.1.3.6.1.4.1.9.6.1.101.29.8.1
rsMaxBrgFrwEntriesMaximal number of entries in bridge forwarding table.ro
INTEGER
.1.3.6.1.4.1.9.6.1.101.29.8.1.1
rsMaxBrgFrwEntriesAfterResetFuture maximal number of entries in bridge forwarding table.rw
INTEGER
.1.3.6.1.4.1.9.6.1.101.29.8.1.2
rsMaxIpForwardingEntriesTuning
OBJECT IDENTIFIER
.1.3.6.1.4.1.9.6.1.101.29.8.2
rsMaxIpFrwEntriesMaximal number of entries in Ip forwarding table.ro
INTEGER
.1.3.6.1.4.1.9.6.1.101.29.8.2.1
rsMaxIpFrwEntriesAfterResetFuture maximal number of entries in Ip forwarding table.rw
INTEGER
.1.3.6.1.4.1.9.6.1.101.29.8.2.2
rsMaxArpEntriesTuning
OBJECT IDENTIFIER
.1.3.6.1.4.1.9.6.1.101.29.8.3
rsMaxArpEntriesMaximal number of entries in Arp forwarding table.ro
INTEGER
.1.3.6.1.4.1.9.6.1.101.29.8.3.1
rsMaxArpEntriesAfterResetFuture maximal number of entries in Arp forwarding table.rw
INTEGER
.1.3.6.1.4.1.9.6.1.101.29.8.3.2
rsMaxIpxForwardingEntriesTuning
OBJECT IDENTIFIER
.1.3.6.1.4.1.9.6.1.101.29.8.4
rsMaxIpxFrwEntriesMaximal number of entries in Ipx forwarding table.ro
INTEGER
.1.3.6.1.4.1.9.6.1.101.29.8.4.1
rsMaxIpxFrwEntriesAfterResetFuture maximal number of entries in Ipx forwarding table.rw
INTEGER
.1.3.6.1.4.1.9.6.1.101.29.8.4.2
rsMaxIpxSapEntriesTuning
OBJECT IDENTIFIER
.1.3.6.1.4.1.9.6.1.101.29.8.5
rsMaxIpxSapEntriesMaximal number of entries in IpxSap table.ro
INTEGER
.1.3.6.1.4.1.9.6.1.101.29.8.5.1
rsMaxIpxSapEntriesAfterResetFuture maximal number of entries in IpxSap table.rw
INTEGER
.1.3.6.1.4.1.9.6.1.101.29.8.5.2
rsMaxDspClntEntriesTuning
OBJECT IDENTIFIER
.1.3.6.1.4.1.9.6.1.101.29.8.6
rsMaxDspClntEntriesMaximal number of entries in rsSdClientsTable.ro
INTEGER
.1.3.6.1.4.1.9.6.1.101.29.8.6.1
rsMaxDspClntEntriesAfterResetFuture maximal number of entries in rsSdClientsTable.rw
INTEGER
.1.3.6.1.4.1.9.6.1.101.29.8.6.2
rsMaxIpFftEntriesTuning
OBJECT IDENTIFIER
.1.3.6.1.4.1.9.6.1.101.29.8.9
rsMaxIpSFftEntriesThe current maximal size of one IP SFFT Table.ro
INTEGER
.1.3.6.1.4.1.9.6.1.101.29.8.9.1
rsMaxIpSFftEntriesAfterResetThe future (after reset) maximal size of one IP SFFT Table.rw
INTEGER
.1.3.6.1.4.1.9.6.1.101.29.8.9.2
rsMaxIpNFftEntriesThe current maximal size of one IP NFFT Table.ro
INTEGER
.1.3.6.1.4.1.9.6.1.101.29.8.9.3
rsMaxIpNFftEntriesAfterResetThe future (after reset) maximal size of one IP NFFT Table.rw
INTEGER
.1.3.6.1.4.1.9.6.1.101.29.8.9.4
rsMaxIpSFftSysEntriesThe current maximal size of the SYSTEM IP SFFT Table.ro
INTEGER
.1.3.6.1.4.1.9.6.1.101.29.8.9.5
rsMaxIpSFftSysEntriesAfterResetThe future (after reset) maximal size of the SYSTEM IP SFFT Table.rw
INTEGER
.1.3.6.1.4.1.9.6.1.101.29.8.9.6
rsMaxIpNFftSysEntriesThe current maximal size of the SYSTEM IP NFFT Table.ro
INTEGER
.1.3.6.1.4.1.9.6.1.101.29.8.9.7
rsMaxIpNFftSysEntriesAfterResetThe future (after reset) maximal size of the SYSTEM IP NFFT Table.rw
INTEGER
.1.3.6.1.4.1.9.6.1.101.29.8.9.8
rsMaxIpNextHopEntriesThe current maximal size of one IP NextHop Table.ro
INTEGER
.1.3.6.1.4.1.9.6.1.101.29.8.9.9
rsMaxIpNextHopEntriesAfterResetThe future (after reset) maximal size of one NextHop Table.rw
INTEGER
.1.3.6.1.4.1.9.6.1.101.29.8.9.10
rsMaxIpxFftEntriesTuning
OBJECT IDENTIFIER
.1.3.6.1.4.1.9.6.1.101.29.8.10
rsMaxIpxSFftEntriesThe current maximal size of one IPX SFFT Table.ro
INTEGER
.1.3.6.1.4.1.9.6.1.101.29.8.10.1
rsMaxIpxSFftEntriesAfterResetThe future (after reset) maximal size of one IPX SFFT Table.rw
INTEGER
.1.3.6.1.4.1.9.6.1.101.29.8.10.2
rsMaxIpxNFftEntriesThe current maximal size of one IPX NFFT Table.ro
INTEGER
.1.3.6.1.4.1.9.6.1.101.29.8.10.3
rsMaxIpxNFftEntriesAfterResetThe future (after reset) maximal size of one IPX NFFT Table.rw
INTEGER
.1.3.6.1.4.1.9.6.1.101.29.8.10.4
rsMaxIpxSFftSysEntriesThe current maximal size of the SYSTEM IPX SFFT Table.ro
INTEGER
.1.3.6.1.4.1.9.6.1.101.29.8.10.5
rsMaxIpxSFftSysEntriesAfterResetThe future (after reset) maximal size of the SYSTEM IPX SFFT Table.rw
INTEGER
.1.3.6.1.4.1.9.6.1.101.29.8.10.6
rsMaxIpxNFftSysEntriesThe current maximal size of the SYSTEM IPX NFFT Table.ro
INTEGER
.1.3.6.1.4.1.9.6.1.101.29.8.10.7
rsMaxIpxNFftSysEntriesAfterResetThe future (after reset) maximal size of the SYSTEM IPX NFFT Table.rw
INTEGER
.1.3.6.1.4.1.9.6.1.101.29.8.10.8
rsMaxDhcpTuning
OBJECT IDENTIFIER
.1.3.6.1.4.1.9.6.1.101.29.8.11
rsMaxDhcpConnsThe current maximal number of DHCP connections.ro
INTEGER
.1.3.6.1.4.1.9.6.1.101.29.8.11.1
rsMaxDhcpConnsAfterResetThe future (after reset) maximal number of DHCP connections.rw
INTEGER
.1.3.6.1.4.1.9.6.1.101.29.8.11.2
rsMaxIpmTuning
OBJECT IDENTIFIER
.1.3.6.1.4.1.9.6.1.101.29.8.12
rsMaxIpmFftEntriesTuning
OBJECT IDENTIFIER
.1.3.6.1.4.1.9.6.1.101.29.8.12.1
rsMaxIpmFftEntriesThe current maximal number of the IPM FFT Tables.ro
INTEGER
.1.3.6.1.4.1.9.6.1.101.29.8.12.1.1
rsMaxIpmFftEntriesAfterResetThe future (after reset) maximal number of the IPM FFT Tables.rw
INTEGER
.1.3.6.1.4.1.9.6.1.101.29.8.12.1.2
rsIpmFftAgingThe aging timeout of the IPM FFT Tables.rw
INTEGER
.1.3.6.1.4.1.9.6.1.101.29.8.12.1.3
rsMaxIgmpTuning
OBJECT IDENTIFIER
.1.3.6.1.4.1.9.6.1.101.29.8.12.2
rsMaxIgmpInterfaceEntriesMaximal number of entries in the IGMP Neighbor Table.ro
INTEGER
.1.3.6.1.4.1.9.6.1.101.29.8.12.2.1
rsMaxIgmpInterfaceEntriesAfterResetFuture maximal number of entries in the IGMP Neighbor Table.rw
INTEGER
.1.3.6.1.4.1.9.6.1.101.29.8.12.2.2
rsMaxIgmpCacheEntriesMaximal number of entries in the IGMP Cache Table.ro
INTEGER
.1.3.6.1.4.1.9.6.1.101.29.8.12.2.3
rsMaxIgmpCacheEntriesAfterResetFuture maximal number of entries in the IGMP Cache Table.rw
INTEGER
.1.3.6.1.4.1.9.6.1.101.29.8.12.2.4
rsMaxPimTuning
OBJECT IDENTIFIER
.1.3.6.1.4.1.9.6.1.101.29.8.12.3
rsMaxPimNeighborEntriesMaximal number of entries in the PIM Neighbor Table.ro
INTEGER
.1.3.6.1.4.1.9.6.1.101.29.8.12.3.1
rsMaxPimNeighborEntriesAfterResetFuture maximal number of entries in the PIM Neighbor Table.rw
INTEGER
.1.3.6.1.4.1.9.6.1.101.29.8.12.3.2
rsMaxPimRouteEntriesMaximal number of entries in the PIM Route Table.ro
INTEGER
.1.3.6.1.4.1.9.6.1.101.29.8.12.3.3
rsMaxPimRouteEntriesAfterResetFuture maximal number of entries in the PIM Route Table.rw
INTEGER
.1.3.6.1.4.1.9.6.1.101.29.8.12.3.4
rsMaxPimRouteNextHopEntriesMaximal number of entries in the PIM Route Next Hop Table.ro
INTEGER
.1.3.6.1.4.1.9.6.1.101.29.8.12.3.5
rsMaxPimRouteNextHopEntriesAfterResetFuture maximal number of entries in the PIM Route Next Hop Table.rw
INTEGER
.1.3.6.1.4.1.9.6.1.101.29.8.12.3.6
rsMaxPimInterfaceEntriesAfterResetFuture maximal number of interfaces in the PIM Interface Table.rw
INTEGER
.1.3.6.1.4.1.9.6.1.101.29.8.12.3.7
rsMaxPimInterfaceEntriesMaximal number of interfaces in the PIM Interface Table.rw
INTEGER
.1.3.6.1.4.1.9.6.1.101.29.8.12.3.8
rsMaxDvmrpTuning
OBJECT IDENTIFIER
.1.3.6.1.4.1.9.6.1.101.29.8.12.4
rsMaxDvmrpNeighborEntriesMaximal number of entries in the Dvmrp Neighbor Table.ro
INTEGER
.1.3.6.1.4.1.9.6.1.101.29.8.12.4.1
rsMaxDvmrpNeighborEntriesAfterResetFuture maximal number of entries in the Dvmrp Neighbor Table.rw
INTEGER
.1.3.6.1.4.1.9.6.1.101.29.8.12.4.2
rsMaxDvmrpRouteEntriesMaximal number of entries in the Dvmrp Route Table.ro
INTEGER
.1.3.6.1.4.1.9.6.1.101.29.8.12.4.3
rsMaxDvmrpRouteEntriesAfterResetFuture maximal number of entries in the Dvmrp Route Table.rw
INTEGER
.1.3.6.1.4.1.9.6.1.101.29.8.12.4.4
rsMaxDvmrpMRouteEntriesMaximal number of entries in the Dvmrp Multicast Route Table.ro
INTEGER
.1.3.6.1.4.1.9.6.1.101.29.8.12.4.5
rsMaxDvmrpMRouteEntriesAfterResetFuture maximal number of entries in the Dvmrp Multicast Route Table.rw
INTEGER
.1.3.6.1.4.1.9.6.1.101.29.8.12.4.6
rsMaxDvmrpInterfaceEntriesMaximal number of interfaces in the Dvmrp Interface Table.rw
INTEGER
.1.3.6.1.4.1.9.6.1.101.29.8.12.4.7
rsMaxDvmrpInterfaceEntriesAfterResetFuture maximal number of interfaces in the Dvmrp Interface Table.rw
INTEGER
.1.3.6.1.4.1.9.6.1.101.29.8.12.4.8
rsMaxPigmpTuning
OBJECT IDENTIFIER
.1.3.6.1.4.1.9.6.1.101.29.8.12.5
rsMaxPigmpRouteEntriesMaximal number of entries in the IGMP Proxy Routing Table.ro
INTEGER
.1.3.6.1.4.1.9.6.1.101.29.8.12.5.1
rsMaxPigmpRouteEntriesAfterResetFuture maximal number of entries in the IGMP Proxy Routing Table.rw
INTEGER
.1.3.6.1.4.1.9.6.1.101.29.8.12.5.2
rsMaxPimSmTuning
OBJECT IDENTIFIER
.1.3.6.1.4.1.9.6.1.101.29.8.12.6
rsMaxPimSmNeighborEntriesMaximal number of entries in the PIM Neighbor Table.ro
INTEGER
.1.3.6.1.4.1.9.6.1.101.29.8.12.6.1
rsMaxPimSmNeighborEntriesAfterResetFuture maximal number of entries in the PIM Neighbor Table.rw
INTEGER
.1.3.6.1.4.1.9.6.1.101.29.8.12.6.2
rsMaxPimSmRouteEntriesMaximal number of entries in the PIM Route Table.ro
INTEGER
.1.3.6.1.4.1.9.6.1.101.29.8.12.6.3
rsMaxPimSmRouteEntriesAfterResetFuture maximal number of entries in the PIM Route Table.rw
INTEGER
.1.3.6.1.4.1.9.6.1.101.29.8.12.6.4
rsMaxPimSmInterfaceEntriesMaximal number of entries in the PIM Interface Table.ro
INTEGER
.1.3.6.1.4.1.9.6.1.101.29.8.12.6.5
rsMaxPimSmInterfaceEntriesAfterResetFuture maximal number of entries in the PIM Interface Table.rw
INTEGER
.1.3.6.1.4.1.9.6.1.101.29.8.12.6.6
rsMaxPimSmRPSetEntriesMaximal number of entries in the RPSet Table.ro
INTEGER
.1.3.6.1.4.1.9.6.1.101.29.8.12.6.7
rsMaxPimSmRPSetEntriesAfterResetFuture maximal number of entries in the RPSet Table.rw
INTEGER
.1.3.6.1.4.1.9.6.1.101.29.8.12.6.8
rsMaxPimSmCRPEntriesMaximal number of entries in the RPSet Table.ro
INTEGER
.1.3.6.1.4.1.9.6.1.101.29.8.12.6.9
rsMaxPimSmCRPEntriesAfterResetFuture maximal number of entries in the RPSet Table.rw
INTEGER
.1.3.6.1.4.1.9.6.1.101.29.8.12.6.10
rsMaxNumberRpAddresesInGroupRangeMaximal number of rp addresses per group range in the RPSet Table.ro
INTEGER
.1.3.6.1.4.1.9.6.1.101.29.8.12.6.11
rsMaxNumberRpAddresesInGroupRangeAfterResetFuture maximal number of rp addresses per group range in the RPSet Table.rw
INTEGER
.1.3.6.1.4.1.9.6.1.101.29.8.12.6.12
rsMaxRmonTuning
OBJECT IDENTIFIER
.1.3.6.1.4.1.9.6.1.101.29.8.13
rsMaxRmonLogEntriesMaximal number of entries in RMON Log table.ro
INTEGER
.1.3.6.1.4.1.9.6.1.101.29.8.13.1
rsMaxRmonLogEntriesAfterResetFuture maximal number of entries in RMON Log table.rw
INTEGER
.1.3.6.1.4.1.9.6.1.101.29.8.13.2
rsMaxRmonEtherHistoryEntriesMaximal number of entries in RMON EtherHistory table.ro
INTEGER
.1.3.6.1.4.1.9.6.1.101.29.8.13.3
rsMaxRmonEtherHistoryEntriesAfterResetFuture maximal number of entries in RMON EtherHistory table.rw
INTEGER
.1.3.6.1.4.1.9.6.1.101.29.8.13.4
rsMaxIgmpSnoopTuning
OBJECT IDENTIFIER
.1.3.6.1.4.1.9.6.1.101.29.8.14
rsMaxIgmpSnoopGroupEntriesThe maximum number of entries in the IGMP Snooping group table.ro
INTEGER
.1.3.6.1.4.1.9.6.1.101.29.8.14.1
rsMaxIgmpSnoopGroupEntriesAfterResetFuture maximal number of entries in the IGMP Snooping group table.rw
INTEGER
.1.3.6.1.4.1.9.6.1.101.29.8.14.2
rsMaxVlansTuning
OBJECT IDENTIFIER
.1.3.6.1.4.1.9.6.1.101.29.8.15
rsMaxVlansEntriesThe maximum number of entries in the VLANs table.ro
INTEGER
.1.3.6.1.4.1.9.6.1.101.29.8.15.1
rsMaxVlansEntriesAfterResetFuture maximal number of entries in the VLANs table.rw
INTEGER
.1.3.6.1.4.1.9.6.1.101.29.8.15.2
rsMaxPolicyTuning
OBJECT IDENTIFIER
.1.3.6.1.4.1.9.6.1.101.29.8.16
rsMaxPolicyMaxRulesEntriesMaximal number of entries in the Policy Route Table.ro
INTEGER
.1.3.6.1.4.1.9.6.1.101.29.8.16.1
rsMaxPolicyMaxRulesEntriesAfterResetFuture maximal number of entries in the Policy Route Table.rw
INTEGER
.1.3.6.1.4.1.9.6.1.101.29.8.16.2
rsMaxPolicySimpleMibMaxRulesEntriesMaximal number of entries in the Policy SimpleMib Table.ro
INTEGER
.1.3.6.1.4.1.9.6.1.101.29.8.16.3
rsMaxPolicySimpleMibMaxRulesEntriesAfterResetFuture maximal number of entries in the Policy SimpleMib Table.rw
INTEGER
.1.3.6.1.4.1.9.6.1.101.29.8.16.4
rsMaxPolicySimpleMibMaxProfilesEntriesMaximal number of entries in the profile Policy SimpleMib Table.ro
INTEGER
.1.3.6.1.4.1.9.6.1.101.29.8.16.5
rsMaxPolicySimpleMibMaxProfilesEntriesAfterResetFuture maximal number of entries in the profile Policy SimpleMib Table.rw
INTEGER
.1.3.6.1.4.1.9.6.1.101.29.8.16.6
rsMaxGvrpVlansTuning
OBJECT IDENTIFIER
.1.3.6.1.4.1.9.6.1.101.29.8.17
rsMaxGvrpVlansThe maximum number of VLANs that can participant in Gvrp.ro
INTEGER
.1.3.6.1.4.1.9.6.1.101.29.8.17.1
rsMaxGvrpVlansAfterResetFuture maximal number of VLANs that can participant in Gvrp.rw
INTEGER
.1.3.6.1.4.1.9.6.1.101.29.8.17.2
rsMaxTraceRouteTuning
OBJECT IDENTIFIER
.1.3.6.1.4.1.9.6.1.101.29.8.18
rsMaxTraceRouteControlEntriesThe maximum number of trace route control entries.ro
INTEGER
.1.3.6.1.4.1.9.6.1.101.29.8.18.1
rsMaxTraceRouteControlEntriesAfterResetFuture maximum number of trace route control entries.rw
INTEGER
.1.3.6.1.4.1.9.6.1.101.29.8.18.2
rsMaxTraceRouteProbeHistoryEntriesThe maximum number of trace route probe history entries.ro
INTEGER
.1.3.6.1.4.1.9.6.1.101.29.8.18.3
rsMaxTraceRouteProbeHistoryEntriesAfterResetFuture maximum number of trace route probe history entries.rw
INTEGER
.1.3.6.1.4.1.9.6.1.101.29.8.18.4
rsMaxSnmpTuning
OBJECT IDENTIFIER
.1.3.6.1.4.1.9.6.1.101.29.8.19
rsMaxSnmpCommunityEntriesThe maximum number of snmpCommunityTable entries.ro
INTEGER
.1.3.6.1.4.1.9.6.1.101.29.8.19.1
rsMaxSnmpCommunityEntriesAfterResetFuture maximum number of snmpCommunityTable entries.rw
INTEGER
.1.3.6.1.4.1.9.6.1.101.29.8.19.2
rsMaxSocketTuning
OBJECT IDENTIFIER
.1.3.6.1.4.1.9.6.1.101.29.8.20
rsMaxNumberOfSocketsMaximal number of sockets.ro
INTEGER
.1.3.6.1.4.1.9.6.1.101.29.8.20.1
rsMaxNumberOfSocketsAfterResetFuture Maximal number of sockets.rw
INTEGER
.1.3.6.1.4.1.9.6.1.101.29.8.20.2
rsMaxSizeOfSocketDataPoolMaximal size of socket data pool.ro
INTEGER
.1.3.6.1.4.1.9.6.1.101.29.8.20.3
rsMaxSizeOfSocketDataPoolAfterResetFuture Maximal size of socket data pool.rw
INTEGER
.1.3.6.1.4.1.9.6.1.101.29.8.20.4
rsMaxIpRouteTuning
OBJECT IDENTIFIER
.1.3.6.1.4.1.9.6.1.101.29.8.21
rsMaxIpPrefixesMaximal number of IP prefixes that router supports.ro
INTEGER
.1.3.6.1.4.1.9.6.1.101.29.8.21.1
rsMaxIpPrefixesAfterResetFutureMaximal number of IP prefixes that router supports.rw
INTEGER
.1.3.6.1.4.1.9.6.1.101.29.8.21.2
rsMaxIpNextHopSetTuning
OBJECT IDENTIFIER
.1.3.6.1.4.1.9.6.1.101.29.8.22
rsMaxIpNextHopSetEntriesMaximal number of NextHops that may be used for forwarding for a destinaton.ro
INTEGER
.1.3.6.1.4.1.9.6.1.101.29.8.22.1
rsMaxIpNextHopSetEntriesAfterResetFutureMaximal number of NextHops that may be used for forwarding for a destinaton.rw
INTEGER
.1.3.6.1.4.1.9.6.1.101.29.8.22.2
rsMaxIpEcmpTuning
OBJECT IDENTIFIER
.1.3.6.1.4.1.9.6.1.101.29.8.23
rsMaxIpEcmpEntrySizeMaximum number of ECMP Sets for forwarding.ro
INTEGER
.1.3.6.1.4.1.9.6.1.101.29.8.23.1
rsMaxIpEcmpEntrySizeAfterResetFutureMaximum number of ECMP Sets for forwarding.rw
INTEGER
.1.3.6.1.4.1.9.6.1.101.29.8.23.2
rsMaxdot1xEapRequestTuning
OBJECT IDENTIFIER
.1.3.6.1.4.1.9.6.1.101.29.8.24
rsMaxdot1xEapRequestEntriesThe maximum number of eap request packets entries that can be retransmitted.ro
INTEGER
.1.3.6.1.4.1.9.6.1.101.29.8.24.1
rsMaxdot1xEapRequestEntriesAfterResetFuture maximum number of eap request packets entries that can be retransmitted.rw
INTEGER
.1.3.6.1.4.1.9.6.1.101.29.8.24.2
rsMaxIpInterfaceTuning
OBJECT IDENTIFIER
.1.3.6.1.4.1.9.6.1.101.29.8.25
rsMaxIpInterfacesMaximal number of IP interfaces. Applies to inBand IP interfaces.ro
INTEGER
.1.3.6.1.4.1.9.6.1.101.29.8.25.1
rsMaxIpInterfacesAfterResetFutureMaximal number of IP interfaces. Applies to inBand IP interfaces.rw
INTEGER
.1.3.6.1.4.1.9.6.1.101.29.8.25.2
rsMaxIpv6FftEntriesTuning
OBJECT IDENTIFIER
.1.3.6.1.4.1.9.6.1.101.29.8.26
rsMaxIpv6SFftEntriesThe current maximal size of one IPV6 SFFT Table.ro
INTEGER
.1.3.6.1.4.1.9.6.1.101.29.8.26.1
rsMaxIpv6SFftEntriesAfterResetThe future (after reset) maximal size of one IPV6 SFFT Table.rw
INTEGER
.1.3.6.1.4.1.9.6.1.101.29.8.26.2
rsMaxIpv6SFftSysEntriesThe current maximal size of the SYSTEM IPV6 SFFT Table.ro
INTEGER
.1.3.6.1.4.1.9.6.1.101.29.8.26.3
rsMaxIpv6SFftSysEntriesAfterResetThe future (after reset) maximal size of the SYSTEM IPV6 SFFT Table.rw
INTEGER
.1.3.6.1.4.1.9.6.1.101.29.8.26.4
rsMaxIpv6PrefixesMaximal number of IPV6 prefixes that router supports.ro
INTEGER
.1.3.6.1.4.1.9.6.1.101.29.8.26.5
rsMaxIpv6PrefixesAfterResetFutureMaximal number of IPV6 prefixes that router supports.rw
INTEGER
.1.3.6.1.4.1.9.6.1.101.29.8.26.6
rsMaxIpv6NextHopEntriesThe current maximal size of one IPV6 NextHop Table.ro
INTEGER
.1.3.6.1.4.1.9.6.1.101.29.8.26.7
rsMaxIpv6NextHopEntriesAfterResetThe future (after reset) maximal size of one NextHop Table.rw
INTEGER
.1.3.6.1.4.1.9.6.1.101.29.8.26.8
rsMaxIpv6NextHopSetEntriesMaximal number of NextHops that may be used for forwarding for a destinaton.ro
INTEGER
.1.3.6.1.4.1.9.6.1.101.29.8.26.9
rsMaxIpv6NextHopSetEntriesAfterResetFutureMaximal number of NextHops that may be used for forwarding for a destinaton.rw
INTEGER
.1.3.6.1.4.1.9.6.1.101.29.8.26.10
rsMaxIpv6GlobalAddressesMaximal global number of IPV6 addresses.ro
INTEGER
.1.3.6.1.4.1.9.6.1.101.29.8.26.11
rsMaxIpv6GlobalAddressesAfterResetFutureMaximal global number of IPV6 addresses.rw
INTEGER
.1.3.6.1.4.1.9.6.1.101.29.8.26.12
rsMaxArpTunnelStartEntriesMaximal global number of tunnel start and ARP entries. Tunnel start refer to tunnel remote stationro
INTEGER
.1.3.6.1.4.1.9.6.1.101.29.8.26.13
rsMaxArpTunnelStartEntriesAfterResetFutureMaximal global number of tunnel start and ARP entries. Tunnel start refer to tunnel remote stationrw
INTEGER
.1.3.6.1.4.1.9.6.1.101.29.8.26.14
rsMaxIpv6InterfaceTuning
OBJECT IDENTIFIER
.1.3.6.1.4.1.9.6.1.101.29.8.27
rsMaxIpv6InterfacesMaximal number of IPV6 interfaces. Applies to inBand IPV6 interfaces.ro
INTEGER
.1.3.6.1.4.1.9.6.1.101.29.8.27.1
rsMaxIpv6InterfacesAfterResetFutureMaximal number of IPV6 interfaces. Applies to inBand IPV6 interfaces.rw
INTEGER
.1.3.6.1.4.1.9.6.1.101.29.8.27.2
rsMaxIpv6AddrPerInterfacesMaximal number of IPV6 Addresses per interfaces.ro
INTEGER
.1.3.6.1.4.1.9.6.1.101.29.8.27.3
rsMaxIpv6AddrPerInterfacesAfterResetFutureMaximal number of IPV6 Addresses per interfaces.rw
INTEGER
.1.3.6.1.4.1.9.6.1.101.29.8.27.4
rsMaxIpRoutesTuning
OBJECT IDENTIFIER
.1.3.6.1.4.1.9.6.1.101.29.8.28
rsMaxIpv4RoutesThe maximum number of IPv4 routers supported by the IPv4 Unicast Hardware Forwarding Table.ro
INTEGER
.1.3.6.1.4.1.9.6.1.101.29.8.28.1
rsMaxIpv4RoutesAfterResetFuture Maximal number of IPv4 routers supported by the IPv4 Unicast Hardware Forwarding Table.rw
INTEGER
.1.3.6.1.4.1.9.6.1.101.29.8.28.2
rsMaxIpv6RoutesThe maximum number of IPv6 routers supported by the IPv6 Unicast Hardware Forwarding Table.ro
INTEGER
.1.3.6.1.4.1.9.6.1.101.29.8.28.3
rsMaxIpv6RoutesAfterResetFuture Maximal number of IPv6 routers supported by the IPv6 Unicast Hardware Forwarding Table.rw
INTEGER
.1.3.6.1.4.1.9.6.1.101.29.8.28.4
rsMaxIpmv4RoutesThe maximum number of IPv4 routers ((*,G) and (S,G)) supported by the IPv4 Multicast Hardware Forwarding Table.ro
INTEGER
.1.3.6.1.4.1.9.6.1.101.29.8.28.5
rsMaxIpmv4RoutesAfterResetFuture Maximal number of IPv4 routers ((*,G) and (S,G)) supported by the IPv4 Multicast Hardware Forwarding Table.rw
INTEGER
.1.3.6.1.4.1.9.6.1.101.29.8.28.6
rsMaxIpmv6RoutesThe maximum number of IPv6 routers ((*,G) and (S,G)) supported by the IPv6 Multicast Hardware Forwarding Table.ro
INTEGER
.1.3.6.1.4.1.9.6.1.101.29.8.28.7
rsMaxIpmv6RoutesAfterResetFuture Maximal number of IPv6 routers ((*,G) and (S,G)) supported by the IPv6 Multicast Hardware Forwarding Table.rw
INTEGER
.1.3.6.1.4.1.9.6.1.101.29.8.28.8
rsTcpTuning
OBJECT IDENTIFIER
.1.3.6.1.4.1.9.6.1.101.29.11
rsTcpMemoryPoolSizeAfterResetThe size of the memory pool that the tcp will allocate after reset. The memory pool is used for sending packetsrw
INTEGER
.1.3.6.1.4.1.9.6.1.101.29.11.1
rsTcpMemoryPoolSizeThe size of the memory pool that the tcp uses currently. The memory pool is used for sending packetsro
INTEGER
.1.3.6.1.4.1.9.6.1.101.29.11.2
rsRadiusTuning
OBJECT IDENTIFIER
.1.3.6.1.4.1.9.6.1.101.29.12
rsRadiusMemoryPoolSizeAfterResetThe size of the memory pool that radius will allocate after reset. The memory pool is used for attributesrw
INTEGER
.1.3.6.1.4.1.9.6.1.101.29.12.1
rsRadiusMemoryPoolSizeThe size of the memory pool that radius uses currently. The memory pool is used for attributesro
INTEGER
.1.3.6.1.4.1.9.6.1.101.29.12.2
rlSyslogTuning
OBJECT IDENTIFIER
.1.3.6.1.4.1.9.6.1.101.29.13
rlSyslogFilePercentToDeleteWhenCompactingWhen the flash file which is used by reports becomes full, a certain percentage of the old messages on flash are deleted. This is the current value.ro
Unsigned32
.1.3.6.1.4.1.9.6.1.101.29.13.3
rlSyslogFilePercentToDeleteWhenCompactingAfterResetWhen the flash file which is used by reports becomes full, a certain percentage of the old messages on flash are deleted. This is the value after reset.rw
Unsigned32
.1.3.6.1.4.1.9.6.1.101.29.13.4
rlSyslogCacheSizeThe size of memory cache of last errors reported. This cache is cyclic. This is the current value.ro
Unsigned32
.1.3.6.1.4.1.9.6.1.101.29.13.5
rlSyslogCacheSizeAfterResetThe size of memory cache of last errors reported. This cache is cyclic. This is the value after reset.rw
Unsigned32
.1.3.6.1.4.1.9.6.1.101.29.13.6
rlMngInfTuning
OBJECT IDENTIFIER
.1.3.6.1.4.1.9.6.1.101.29.14
rlMaxNumberOfAccessRulesThe Maximum number of rules per Access List that can be definedro
INTEGER
.1.3.6.1.4.1.9.6.1.101.29.14.1
rlMaxNumberOfAccessRulesAfterResetThe Maximum number of rules per Access List for after reset tuningrw
INTEGER
.1.3.6.1.4.1.9.6.1.101.29.14.2
rsDiagnosticTextSourceThe source from which SNMP diagnostics message texts should be taken.rw
Enumeration
.1.3.6.1.4.1.9.6.1.101.29.16
rsMultiSession
OBJECT IDENTIFIER
.1.3.6.1.4.1.9.6.1.101.29.17
rsMultiSessionMaxSessionsAfterResetThe maximum number of terminal sessions (serial, telnet and ssh) available after reset.rw
INTEGER
.1.3.6.1.4.1.9.6.1.101.29.17.1
rsMultiSessionMaxSessionsThe maximum number of terminal sessions (serial, telnet and ssh) available.ro
INTEGER
.1.3.6.1.4.1.9.6.1.101.29.17.2
rlDnsClTuning
OBJECT IDENTIFIER
.1.3.6.1.4.1.9.6.1.101.29.18
rlMaxDnsClCacheRREntriesThe current maximal number of DNS client cache entries.ro
INTEGER
.1.3.6.1.4.1.9.6.1.101.29.18.1
rlMaxDnsClCacheRREntriesAfterResetThe future (after reset) maximal number of DNS client cache entries.rw
INTEGER
.1.3.6.1.4.1.9.6.1.101.29.18.2
rlMaxDnsClNCacheErrEntriesThe current maximal number of DNS client negative cache entries.ro
INTEGER
.1.3.6.1.4.1.9.6.1.101.29.18.3
rlMaxDnsClNCacheErrEntriesAfterResetThe future (after reset) maximal number of DNS client negative cache entries.rw
INTEGER
.1.3.6.1.4.1.9.6.1.101.29.18.4
rlMaxDnsClNamesEntriesThe current maximal number of DNS client static names entries.ro
INTEGER
.1.3.6.1.4.1.9.6.1.101.29.18.5
rlMaxDnsClNamesEntriesAfterResetThe future (after reset) maximal number of DNS client static names entries.rw
INTEGER
.1.3.6.1.4.1.9.6.1.101.29.18.6
rlTuningParamsTabletable to show tuning : limits curent and after reset values.
SEQUENCE OF RlTuningParamsEntry
.1.3.6.1.4.1.9.6.1.101.29.19
rlTuningParamsEntryDefines the contents of each line in the rlTuningParamsTable table.
RlTuningParamsEntry
.1.3.6.1.4.1.9.6.1.101.29.19.1
rlTuningParamsNameIndex to the rlTuningParamsTable. name of current value Mib for this entry.ro
DisplayString
.1.3.6.1.4.1.9.6.1.101.29.19.1.1
rlTuningParamsCurrentValueThis variable current value used in this run by the system.ro
INTEGER
.1.3.6.1.4.1.9.6.1.101.29.19.1.2
rlTuningParamsAfterResetValueThis variable value that will be used in next run by the system. i.e. the value will be effective after next rebootro
INTEGER
.1.3.6.1.4.1.9.6.1.101.29.19.1.3
rlTuningParamsDefaultValueThis variable value that is used by the system as default.ro
INTEGER
.1.3.6.1.4.1.9.6.1.101.29.19.1.4
rlTuningParamsMinimalValueThis variable value indicate minimum value. this is the lower limit for editing the value after reset.ro
INTEGER
.1.3.6.1.4.1.9.6.1.101.29.19.1.5
rlTuningParamsMaximalValueThis variable value indicate maximum value. This is the upper limit for editing the value after reset.ro
INTEGER
.1.3.6.1.4.1.9.6.1.101.29.19.1.6
rlHostParamTabletable to show tuning : limits curent and after reset values.
SEQUENCE OF RlHostParamEntry
.1.3.6.1.4.1.9.6.1.101.29.20
rlHostParamEntryDefines the contents of each line in the rlHostParamTable table.
RlHostParamEntry
.1.3.6.1.4.1.9.6.1.101.29.20.1
rlHostParamNameIndex to the rlHostParamTable. name of current value Mib for this entry.ro
DisplayString
.1.3.6.1.4.1.9.6.1.101.29.20.1.1
rlHostParamValueThis variable indicates the current INTEGER value used in this run by the system. Applicable only if rlHostParamType has 'int' valuero
INTEGER
.1.3.6.1.4.1.9.6.1.101.29.20.1.2
rlHostParamTypeThis variable indicates the type of this host parameter. int - the value will be appear in the rlHostParamValue instance of this conceptual row. uint - the value will be appear in the rlHostParamUINT instance of this conceptual row. octetString - the value will be appear in the rlHostParamOctetString instance of this conceptual row. ipV4address - the value will be appear in the rlHostParamIpAddress instance of this conceptual row. ipV6address - the value will be appear in the rlHostParamOctetString instance of this conceptual row, to be interpreted as indicated in INET-ADDRESS-MIB. ipV6zAddress - the value will be appear in the rlHostParamOctetString instance of this conceptual row, to be interpreted as indicated in INET-ADDRESS-MIB. inetAddress - the inet address type will be appear in the rlHostParamUINT instance and inet address itself will be appear in the rlHostParamOctetString instance of this conceptual row, to be interpreted as indicated in INET-ADDRESS-MIB. macAddress - the value will be appear in the rlHostParamOctetString instance of this conceptual row, to be interpreted as in SNMPv2-TC. objectIdentifier - the value the value will be appear in the rlHostParamObjectId instance of this conceptual row. displayString - the value will be appear in the rlHostParamOctetString instance of this conceptual row, to be interpreted as in SNMPv2-TC. truthValue - the value will be appear in the rlHostParamUINT instance of this conceptual row, to be interpreted as in SNMPv2-TC. portlist - the value will be appear in the rlHostParamOctetString instance of this conceptual row, to be interpreted as in Q-BRIDGE-MIB.ro
Enumeration
.1.3.6.1.4.1.9.6.1.101.29.20.1.3
rlHostParamUINTThis variable indicates the current UINT value used in this run by the system. Applicable only if rlHostParamType has 'uint', inetAddress or truthValue valuero
Unsigned32
.1.3.6.1.4.1.9.6.1.101.29.20.1.4
rlHostParamOctetStringThis variable indicates the current OCTET STRING value used in this run by the system. Applicable only if rlHostParamType has octetString, ipV6address, ipV6zAddress, inetAddress, macAddress or displayString valuero
OCTET STRING
.1.3.6.1.4.1.9.6.1.101.29.20.1.5
rlHostParamIpAddressThis variable indicates the current IpAddress value used in this run by the system. Applicable only if rlHostParamType has ipV4address valuero
IpAddress
.1.3.6.1.4.1.9.6.1.101.29.20.1.6
rlHostParamObjectIdThis variable indicates the current OBJECT IDENTIFIER value used in this run by the system. Applicable only if rlHostParamType has objectIdentifier valuero
OBJECT IDENTIFIER
.1.3.6.1.4.1.9.6.1.101.29.20.1.7
rlOspfTuning
OBJECT IDENTIFIER
.1.3.6.1.4.1.9.6.1.101.29.21
rlMaxOspfInterfacesThe current maximum number of ospf interfaces.ro
INTEGER
.1.3.6.1.4.1.9.6.1.101.29.21.1
rlMaxOspfInterfacesAfterResetThe future (after reset) maximum number of ospf interfaces.rw
INTEGER
.1.3.6.1.4.1.9.6.1.101.29.21.2
rlMaxOspfAreasThe current maximum number of ospf areas.ro
INTEGER
.1.3.6.1.4.1.9.6.1.101.29.21.3
rlMaxOspfAreasAfterResetThe future (after reset) maximum number of ospf areas.rw
INTEGER
.1.3.6.1.4.1.9.6.1.101.29.21.4
rlMaxOspfNeighborsThe current maximum number of ospf neighbors.ro
INTEGER
.1.3.6.1.4.1.9.6.1.101.29.21.5
rlMaxOspfNeighborsAfterResetThe future (after reset) maximum number of ospf neighbors.rw
INTEGER
.1.3.6.1.4.1.9.6.1.101.29.21.6
rlMaxOspfAbrPerAreaThe current maximum number of ABR in ospf area.ro
INTEGER
.1.3.6.1.4.1.9.6.1.101.29.21.7
rlMaxOspfAbrPerAreaAfterResetThe future (after reset) maximum number of ABR in ospf area.rw
INTEGER
.1.3.6.1.4.1.9.6.1.101.29.21.8
rlMaxOspfNetsInAsThe current maximum number of networks in AS.ro
INTEGER
.1.3.6.1.4.1.9.6.1.101.29.21.9
rlMaxOspfNetsInAsAfterResetThe future (after reset) maximum number of networks in AS.rw
INTEGER
.1.3.6.1.4.1.9.6.1.101.29.21.10
rlVlanTuning
OBJECT IDENTIFIER
.1.3.6.1.4.1.9.6.1.101.29.22
rlVlanDefaultVIDThe default vlan vid.ro
INTEGER
.1.3.6.1.4.1.9.6.1.101.29.22.1
rlVlanDefaultVIDAfterResetThe default vlan vid after restrw
INTEGER
.1.3.6.1.4.1.9.6.1.101.29.22.2
rlVlanUsageForbiddenListTableThe list of vlan IDs that forbidden for internal usage.
SEQUENCE OF RlVlanUsageForbiddenListEntry
.1.3.6.1.4.1.9.6.1.101.29.22.3
rlVlanUsageForbiddenListEntryStatical created by local or network management VLAN list
RlVlanUsageForbiddenListEntry
.1.3.6.1.4.1.9.6.1.101.29.22.3.1
rlVlanUsageForbiddenListIndexAn index is entrie's sequence.ro
INTEGER
.1.3.6.1.4.1.9.6.1.101.29.22.3.1.1
rlVlanUsageForbiddenList1to1024A list of staticaly created vlans from 1 to 1024.ro
VlanList1 (CISCOSB-BRIDGEMIBOBJECTS-MIB)
.1.3.6.1.4.1.9.6.1.101.29.22.3.1.2
rlVlanUsageForbiddenList1025to2048A list of according to the type field created vlans from 1025 to 2048.ro
VlanList2 (CISCOSB-BRIDGEMIBOBJECTS-MIB)
.1.3.6.1.4.1.9.6.1.101.29.22.3.1.3
rlVlanUsageForbiddenList2049to3072A list of according to the type field created vlans from 2049 to 3072.ro
VlanList3 (CISCOSB-BRIDGEMIBOBJECTS-MIB)
.1.3.6.1.4.1.9.6.1.101.29.22.3.1.4
rlVlanUsageForbiddenList3073to4094A list of according to the type field created vlans from 3073 to 4094.ro
VlanList4 (CISCOSB-BRIDGEMIBOBJECTS-MIB)
.1.3.6.1.4.1.9.6.1.101.29.22.3.1.5
rlVlanUsageForbiddenListAfterResetTableThe list of vlan IDs that forbidden for internal usage. The configuration applied after the system reset.
SEQUENCE OF RlVlanUsageForbiddenListAfterResetEntry
.1.3.6.1.4.1.9.6.1.101.29.22.4
rlVlanUsageForbiddenListAfterResetEntryStaticly created by local or network management vlan list
RlVlanUsageForbiddenListAfterResetEntry
.1.3.6.1.4.1.9.6.1.101.29.22.4.1
rlVlanUsageForbiddenListAfterResetIndexAn index is entrie's sequence.rw
INTEGER
.1.3.6.1.4.1.9.6.1.101.29.22.4.1.1
rlVlanUsageForbiddenListAfterReset1to1024A list of staticaly created vlans from 1 to 1024.rw
VlanList1 (CISCOSB-BRIDGEMIBOBJECTS-MIB)
.1.3.6.1.4.1.9.6.1.101.29.22.4.1.2
rlVlanUsageForbiddenListAfterReset1025to2048A list of according to the type field created vlans from 1025 to 2048.rw
VlanList2 (CISCOSB-BRIDGEMIBOBJECTS-MIB)
.1.3.6.1.4.1.9.6.1.101.29.22.4.1.3
rlVlanUsageForbiddenListAfterReset2049to3072A list of according to the type field created vlans from 2049 to 3072.rw
VlanList3 (CISCOSB-BRIDGEMIBOBJECTS-MIB)
.1.3.6.1.4.1.9.6.1.101.29.22.4.1.4
rlVlanUsageForbiddenListAfterReset3073to4094A list of according to the type field created vlans from 3073 to 4094.rw
VlanList4 (CISCOSB-BRIDGEMIBOBJECTS-MIB)
.1.3.6.1.4.1.9.6.1.101.29.22.4.1.5
rlDependendFeaturesEnableTuning
OBJECT IDENTIFIER
.1.3.6.1.4.1.9.6.1.101.29.23
rlDependendFeaturesEnabledCurrent set of running features. These features combinations may limit by A. The same resource (such as ASIC module). B. limitation of product or logic for combination System limit is for up to 5 features First implemented with 3.ro
Bits
.1.3.6.1.4.1.9.6.1.101.29.23.1
rlDependendFeaturesEnabledAfterResetNext system load (after reset) set of running features. These features combinations limited by A. The same resource (such as ASIC module). B. Limitation of product or logic for combination (one feature override the other). C. Per product some or all features status may not be changed. System limit is for up to 5 features First implemented with 3.rw
Bits
.1.3.6.1.4.1.9.6.1.101.29.23.2
rlIpDhcpSnoopingTuning
OBJECT IDENTIFIER
.1.3.6.1.4.1.9.6.1.101.29.24
rlMaxIpDhcpSnoopingEntriesThe current maximum number of DHCP snooping entries.ro
INTEGER
.1.3.6.1.4.1.9.6.1.101.29.24.1
rlMaxIpDhcpSnoopingEntriesAfterResetThe future (after reset) maximum number of DHCP snooping entries.rw
INTEGER
.1.3.6.1.4.1.9.6.1.101.29.24.2
rlIscsiSnoopTuning
OBJECT IDENTIFIER
.1.3.6.1.4.1.9.6.1.101.29.25
rlIscsiSnoopMaxNumOfConnectionsDefines the presetly effective upper limit of iSCSI connections number the device guarantees to supportro
INTEGER
.1.3.6.1.4.1.9.6.1.101.29.25.1
rlIscsiSnoopMaxNumOfConnectionsAfterResetDefines the upper limit of iSCSI connections number the device will have to support following the looming System resetrw
INTEGER
.1.3.6.1.4.1.9.6.1.101.29.25.2
rlDhcpServerTuning
OBJECT IDENTIFIER
.1.3.6.1.4.1.9.6.1.101.29.26
rlDhcpSrvMaxAllocatedAddressesDefines the maximal number of allocated addresses by DHCP serverro
INTEGER
.1.3.6.1.4.1.9.6.1.101.29.26.1
rlDhcpSrvMaxAllocatedAddressesAfterResetDefines the maximal number of allocated addresses by DHCP server activated after resetrw
INTEGER
.1.3.6.1.4.1.9.6.1.101.29.26.2
rlBrgMacHashChainLenCurrent depth of the MAC address hashing Tablero
INTEGER
.1.3.6.1.4.1.9.6.1.101.29.27
rlBrgMacHashChainLenAfterResetDefines the depth in step of 4, of the MAC address hashing Table after reset. The mac chain length is the scalar value multiplied by 4.rw
INTEGER
.1.3.6.1.4.1.9.6.1.101.29.28
rlBrgMacHashFunctionCurrent depth of the MAC address hashing Tablero
Enumeration
.1.3.6.1.4.1.9.6.1.101.29.29
rlBrgMacHashFunctionAfterResetDefines hash function vlan random mac random vlan sequntial mac sequential vlan sequential mac random vlan random mac sequntialrw
Enumeration
.1.3.6.1.4.1.9.6.1.101.29.30
CISCOSB-Tuning - SNMP MIB Reference | MIBs Explorer