CISCOSB-TUNNEL-MIB
The CISCOSB-TUNNEL-MIB provides vendor-specific management interfaces for Cisco Secure Border (SB) appliances to monitor tunneling session states, encapsulation parameters, and traffic statistics for configured IPsec or GRE tunnels.
Imported Objects
Objects
34 total| Object Name |
|---|
rlTunnelThe private MIB module definition for Tunneling. MODULE-IDENTITY .1.3.6.1.4.1.9.6.1.101.122 |
CISCOSB-MIBThe private MIB module definition for Tunneling. Unknown .1.3.6.1.4.1.9.6.1.101.122 |
rlTunnelIsatapStatusThe ISATAP status.rwdeprecated Enumeration .1.3.6.1.4.1.9.6.1.101.122.1 |
rlTunnelIsatapRobustnessspecifies how many DNS Querys and Router Solicitations
should be sent to get the corresponding reply.rwdeprecated Unsigned32 (1 .. 20) -- UNITS "seconds" .1.3.6.1.4.1.9.6.1.101.122.2 |
rlTunnelIsatapDnsHostNameThe domain name for ISATAP.rwdeprecated DnsName (DNS-SERVER-MIB) .1.3.6.1.4.1.9.6.1.101.122.3 |
rlTunnelIsatapQueryIntervalspecifies the time interval between sending of
DNS Queries before receiving the first reply from the DNS Server.rwdeprecated Unsigned32 (10 .. 3600) -- UNITS "seconds" .1.3.6.1.4.1.9.6.1.101.122.4 |
rlTunnelIsatapRSIntervalspecifies the time interval between sending of Router
Solicitations before receiving the first reply from the ISATAP Router.rwdeprecated Unsigned32 (10 .. 3600) -- UNITS "seconds" .1.3.6.1.4.1.9.6.1.101.122.5 |
rlTunnelIsatapMinQueryIntervalspecifies the minimum time interval between between successive queries
of same advertising ISATAP interface.rodeprecated Unsigned32 (0 .. 3600) -- UNITS "seconds" .1.3.6.1.4.1.9.6.1.101.122.6 |
rlTunnelIsatapMinRSIntervalspecifies the minimum time between successive solicitations of the
same advertising ISATAP interface.rodeprecated Unsigned32 (0 .. 3600) -- UNITS "seconds" .1.3.6.1.4.1.9.6.1.101.122.7 |
rlTunnelIsatapRouterAddressspecifies the IPv4 address of ISATAP Router.rodeprecated IpAddress .1.3.6.1.4.1.9.6.1.101.122.8 |
rlTunnelIsatapLocalIPv4Addressspecifies the IPv4 address currently used as IPv4 source address
for ISATAP Tunnel.rodeprecated IpAddress .1.3.6.1.4.1.9.6.1.101.122.9 |
rlTunnelGeneral OBJECT IDENTIFIER .1.3.6.1.4.1.9.6.1.101.122.11 |
rlTunnelIfTableThis table is parallel to tunnelIfTable, and is used to
add/delete tunnel entries to/from that table.
In addition it contains private objects. SEQUENCE OF RlTunnelIfEntry .1.3.6.1.4.1.9.6.1.101.122.11.1 |
rlTunnelIfEntryAdditional configuration parameters for a tunnel interface. RlTunnelIfEntry .1.3.6.1.4.1.9.6.1.101.122.11.1.1 |
rlTunnelIfEncapsMethodThe encapsulation method used by the tunnel.
This field added since it is read-only in standard MIB.rw IANAtunnelType (IANAifType-MIB) .1.3.6.1.4.1.9.6.1.101.122.11.1.1.1 |
rlTunnelIfLocalAddressSourceDefines the method of obtaining Local address for
the tunnel interface.
Configured - configured by user.
Automatic - minimum IP address of the device.
Interface - minimum IP address on user specified interface.rw Enumeration .1.3.6.1.4.1.9.6.1.101.122.11.1.1.2 |
rlTunnelIfLocalAddressInterfaceIdInterface ID, used to determine Local address for tunnel interface
if rlTunnelIfLocalAddressSource set to interface.rw Unsigned32 .1.3.6.1.4.1.9.6.1.101.122.11.1.1.3 |
rlTunnelIfLocalIPv4AddressSpecifies the IPv4 address currently used as IPv4 Local address
for IPv6 over IPv4 Tunnel.ro IpAddress .1.3.6.1.4.1.9.6.1.101.122.11.1.1.4 |
rlTunnelIfStatusThe status of this row, by which new entries may be
created, or old entries deleted from this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.9.6.1.101.122.11.1.1.5 |
rlTunnelTypeSpecific OBJECT IDENTIFIER .1.3.6.1.4.1.9.6.1.101.122.12 |
rlTunnelIsatap OBJECT IDENTIFIER .1.3.6.1.4.1.9.6.1.101.122.12.1 |
rlTunnelIsatapConfTableThis table contains ISATAP-specific configuration. SEQUENCE OF RlTunnelIsatapConfEntry .1.3.6.1.4.1.9.6.1.101.122.12.1.1 |
rlTunnelIsatapConfEntryAdditional configuration parameters for a tunnel interface. RlTunnelIsatapConfEntry .1.3.6.1.4.1.9.6.1.101.122.12.1.1.1 |
rlTunnelIsatapConfDnsNameDNS name.rw OCTET STRING .1.3.6.1.4.1.9.6.1.101.122.12.1.1.1.1 |
rlTunnelIsatapConfRowStatusThe status of this row, by which new entries may be
created, or old entries deleted from this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.9.6.1.101.122.12.1.1.1.2 |
rlTunnelIsatapPrlTableThis table contains ISATAP-specific configuration. SEQUENCE OF RlTunnelIsatapPrlEntry .1.3.6.1.4.1.9.6.1.101.122.12.1.2 |
rlTunnelIsatapPrlEntryAdditional configuration parameters for a tunnel interface. RlTunnelIsatapPrlEntry .1.3.6.1.4.1.9.6.1.101.122.12.1.2.1 |
rlTunnelIsatapPrlIfIndexThe index of the interface to which this PRL entry belongs.ro Unsigned32 .1.3.6.1.4.1.9.6.1.101.122.12.1.2.1.1 |
rlTunnelIsatapPrlPriorityThe priority of the entry. Lower value - higher priority.ro Unsigned32 .1.3.6.1.4.1.9.6.1.101.122.12.1.2.1.2 |
rlTunnelIsatapPrlAddressIPv4 address of the potential router.ro IpAddress .1.3.6.1.4.1.9.6.1.101.122.12.1.2.1.3 |
rlTunnelIsatapPrlIsActiveWhether the PRL entry is active (meaning it has an up to date RA).ro Enumeration .1.3.6.1.4.1.9.6.1.101.122.12.1.2.1.4 |
rlTunnelIsatapConfRSIntervalSpecifies the time interval between Router Solicitations prior to
receiving the first reply from the ISATAP router.rw Unsigned32 (10 .. 3600) -- UNITS "seconds" .1.3.6.1.4.1.9.6.1.101.122.12.1.11 |
rlTunnelIsatapConfRobustnessAfter a Router Advertisement was received, Router Solicitation
messages are sent every Lifetime / (1 + Robustness) seconds, where
Lifetime is the Lifetime advertised in the RA.rw Unsigned32 (1 .. 20) .1.3.6.1.4.1.9.6.1.101.122.12.1.12 |
rlTunnelIPv6EndConfigUsed to indicate end of snmp configuration for IPv6. Can be removed,
if mechanism for indicating end config per mib is added to SNMP.rw INTEGER .1.3.6.1.4.1.9.6.1.101.122.12.2 |
More MIBs from Cisco
Browse all CiscoMIBs →The CISCO-ENTITY-VENDORTYPE-OID-MIB maps Cisco-specific hardware component identifiers to the ENTITY-MIB's entPhysicalTable, enabling precise differentiation of physical device types such as line cards, power supplies, and fans within Cisco infrastructure. This mapping ensures that SNMP management systems can accurately correlate physical inventory entries with vendor-specific component definitions for accurate device discovery and monitoring.
The CISCO-UNIFIED-COMPUTING-EQUIPMENT-MIB provides SNMP-based monitoring and management of Cisco Unified Computing System (UCS) hardware components, including chassis, blades, fabric interconnects, and power supplies. It exposes critical operational metrics such as device status, port states, temperature readings, fan speeds, and power consumption data for infrastructure health assessment.
The CISCO-UNIFIED-COMPUTING-ADAPTOR-MIB enables SNMP-based monitoring and management of physical and virtual network adapter interfaces, including link status, traffic counters, error statistics, and port configuration parameters, within the Cisco Unified Computing System (UCS) fabric interconnects and blade servers.
The CISCO-UNIFIED-COMPUTING-TC-MIB module defines standard textual conventions and data type definitions required for monitoring Cisco Unified Computing System (UCS) hardware components, including server blades, fabric interconnects, and chassis resources. These definitions enable consistent interpretation of specific UCS metrics such as power supply status, fan speeds, thermal readings, and port utilization across SNMP management applications.
The CISCO-UNIFIED-COMPUTING-FABRIC-MIB enables SNMP-based monitoring and management of the Cisco UCS Fabric Interconnects and associated fabric switching infrastructure, exposing metrics for port states, link utilization, error counters, and fabric topology status. It facilitates granular visibility into the physical and logical fabric layers, including uplink/downlink interfaces, VLAN configurations, and fabric failover conditions within the unified computing environment.
The STARENT-MIB module provides SNMP management and monitoring capabilities for Cisco ASR 5000 and ASR 5500 multimedia core platforms, specifically exposing metrics related to 2G/3G/4G and WiFi subscriber sessions, inline service states, and carrier-class high-availability status.