CISCOSB-MNGINF-MIB
AI MIB Summary
The CISCOSB-MNGINF-MIB module defines private management access control parameters for Cisco Secure Border (SB) appliances, specifically monitoring authentication states, session limits, and administrative privilege enforcement. This MIB enables the tracking of management plane security events and the configuration of access policies to restrict or authorize remote administrative connections.
The private MIB module definition for management access control.
Main OID:
rlMngInf.1.3.6.1.4.1.9.6.1.101.89
27
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
27 total| Object Name |
|---|
rlMngInfThe private MIB module definition for management access control. MODULE-IDENTITY .1.3.6.1.4.1.9.6.1.101.89 |
rlMngInfMibVersionMIB's version, the current version is 1.ro INTEGER .1.3.6.1.4.1.9.6.1.101.89.1 |
rlMngInfEnableThe variable specifies if Management ACL functionality is enabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.6.1.101.89.2 |
rlMngInfActiveListNameThe currently activated Management ACL namerw DisplayString .1.3.6.1.4.1.9.6.1.101.89.3 |
rlMngInfListTableThe table specifies all defined Access Lists definitions for IPv4 addresses. Provide backward compatibility for previous versions. SEQUENCE OF RlMngInfListEntry .1.3.6.1.4.1.9.6.1.101.89.4 |
rlMngInfListEntryRow definition for this table. RlMngInfListEntry .1.3.6.1.4.1.9.6.1.101.89.4.1 |
rlMngInfListNameThe Name of the Access List.ro DisplayString .1.3.6.1.4.1.9.6.1.101.89.4.1.1 |
rlMngInfListPriorityThe Priority value.ro Unsigned32 .1.3.6.1.4.1.9.6.1.101.89.4.1.2 |
rlMngInfListIfIndexThe IfIndex value. The IfIndex can be configured to be 0, which means don't care value.rw Unsigned32 .1.3.6.1.4.1.9.6.1.101.89.4.1.3 |
rlMngInfListIpAddrThe IP address. The IP address can be configured to be 0, which means don't care value.rw IpAddress .1.3.6.1.4.1.9.6.1.101.89.4.1.4 |
rlMngInfListIpNetMaskThe subnet mask associated with the IP address of this entry. The value of the mask is an IP address with all the network bits set to 1 and all the hosts bits set to 0.rw IpAddress .1.3.6.1.4.1.9.6.1.101.89.4.1.5 |
rlMngInfListServiceService type. The Service type address can be configured to be 0, which means any of Telnet, SNMP, HTTP, HTTPS, SSH.rw RlMngInfServiceType .1.3.6.1.4.1.9.6.1.101.89.4.1.6 |
rlMngInfListActionAction type. Can be permit or deny.rw RlMngInfActionType .1.3.6.1.4.1.9.6.1.101.89.4.1.7 |
rlMngInfListRowStatusThe row status variable, used according to row installation and removal conventions.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.9.6.1.101.89.4.1.8 |
rlMngInfAuditingEnableControls whether SysLog messages should be issued on reject by rulerw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.6.1.101.89.5 |
rlMngInfListInetTableThe table specifies all defined Access Lists definitions definitions for both IPv4 and IPv6 addresses. SEQUENCE OF RlMngInfListInetEntry .1.3.6.1.4.1.9.6.1.101.89.6 |
rlMngInfListInetEntryRow definition for this table. RlMngInfListInetEntry .1.3.6.1.4.1.9.6.1.101.89.6.1 |
rlMngInfListInetNameThe Name of the Access List.ro DisplayString .1.3.6.1.4.1.9.6.1.101.89.6.1.1 |
rlMngInfListInetPriorityThe Priority value.ro Unsigned32 .1.3.6.1.4.1.9.6.1.101.89.6.1.2 |
rlMngInfListInetIfIndexThe IfIndex value. The IfIndex can be configured to be 0, which means don't care value.rw Unsigned32 .1.3.6.1.4.1.9.6.1.101.89.6.1.3 |
rlMngInfListInetIpAddrTypeThe Inet address type.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.9.6.1.101.89.6.1.4 |
rlMngInfListInetIpAddrThe Inet address.Used for both IPv4 and IPv6 addresses. The InetIpAddress can be configured to be 0.0.0.0 and address type IPv4 , which means ignored value.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.9.6.1.101.89.6.1.5 |
rlMngInfListInetIpNetMaskThis field will used in case of IPv4 addresses . For IPv6 this field ignored. Default value 255.255.255.255.rw IpAddress .1.3.6.1.4.1.9.6.1.101.89.6.1.6 |
rlMngInfListInetServiceService type. The Service type address can be configured to be 0, which means any of Telnet, SNMP, HTTP, HTTPS, SSH.rw RlMngInfServiceType .1.3.6.1.4.1.9.6.1.101.89.6.1.7 |
rlMngInfListInetActionAction type. Can be permit or deny.rw RlMngInfActionType .1.3.6.1.4.1.9.6.1.101.89.6.1.8 |
rlMngInfListInetRowStatusThe row status variable, used according to row installation and removal conventions.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.9.6.1.101.89.6.1.9 |
rlMngInfListInetIPv6PrefixLengthIPv6 prefix length.This field provide IPv6 prefix length (mask) for IPv6 only.In case of IPv4 this field will ignoredrw INTEGER (0.. 128) .1.3.6.1.4.1.9.6.1.101.89.6.1.10 |