Home/Catalog/CISCOSB-DEVICEPARAMS-MIB

CISCOSB-DEVICEPARAMS-MIB

AI MIB Summary

The CISCOSB-DEVICEPARAMS-MIB provides access to vendor-specific general configuration parameters and operational state variables for Cisco Secure Border (CISCOSB) devices. This module enables the monitoring of critical device attributes such as interface status, system resources, and security policy states essential for managing the Cisco Secure Border Appliance.

This private MIB module defines general Parameters private MIBs.
Main OID:
rndDeviceParams.1.3.6.1.4.1.9.6.1.101.2
64
Objects
Active
Status
3
Dependencies

Imported Objects

Objects

64 total
Object Name
rndDeviceParams
MODULE-IDENTITY
.1.3.6.1.4.1.9.6.1.101.2
rndBridgeTypero
Enumeration
.1.3.6.1.4.1.9.6.1.101.2.1
rndInactiveArpTimeOutrw
INTEGER
.1.3.6.1.4.1.9.6.1.101.2.2
rndBridgeAlarm
OBJECT IDENTIFIER
.1.3.6.1.4.1.9.6.1.101.2.3
rndErrorDescro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.9.6.1.101.2.3.1
rndErrorSeverityro
Enumeration
.1.3.6.1.4.1.9.6.1.101.2.3.2
rndBrgVersionro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.9.6.1.101.2.4
rndBrgFeaturesro
OCTET STRING -- SIZE 20
.1.3.6.1.4.1.9.6.1.101.2.5
rndBrgLicenserw
OCTET STRING -- SIZE 20
.1.3.6.1.4.1.9.6.1.101.2.6
rndIpHost
OBJECT IDENTIFIER
.1.3.6.1.4.1.9.6.1.101.2.7
rndCommunityTable
SEQUENCE OF RndCommunityEntry
.1.3.6.1.4.1.9.6.1.101.2.7.2
rndCommunityEntry
RndCommunityEntry
.1.3.6.1.4.1.9.6.1.101.2.7.2.1
rndCommunityMngStationAddrrw
IpAddress
.1.3.6.1.4.1.9.6.1.101.2.7.2.1.1
rndCommunityStringrw
DisplayString
.1.3.6.1.4.1.9.6.1.101.2.7.2.1.2
rndCommunityAccessrw
Enumeration
.1.3.6.1.4.1.9.6.1.101.2.7.2.1.3
rndCommunityTrapsEnablerw
Enumeration
.1.3.6.1.4.1.9.6.1.101.2.7.2.1.4
rndCommunityStatusrw
Enumeration
.1.3.6.1.4.1.9.6.1.101.2.7.2.1.5
rndCommunityPortSecurityrw
Enumeration
.1.3.6.1.4.1.9.6.1.101.2.7.2.1.6
rndCommunityOwnerrw
DisplayString
.1.3.6.1.4.1.9.6.1.101.2.7.2.1.7
rndCommunityTrapDestPortrw
INTEGER
.1.3.6.1.4.1.9.6.1.101.2.7.2.1.8
rlMridTable
SEQUENCE OF RlMridEntry
.1.3.6.1.4.1.9.6.1.101.2.7.3
rlMridEntry
RlMridEntry
.1.3.6.1.4.1.9.6.1.101.2.7.3.1
rlMridConnectionrw
INTEGER
.1.3.6.1.4.1.9.6.1.101.2.7.3.1.1
rlManagedMridrw
INTEGER
.1.3.6.1.4.1.9.6.1.101.2.7.3.1.2
rndIpHostManagement
OBJECT IDENTIFIER
.1.3.6.1.4.1.9.6.1.101.2.7.4
rndIpHostManagementSupportedro
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.9.6.1.101.2.7.4.1
rndIpHostManagementIfIndexrw
INTEGER
.1.3.6.1.4.1.9.6.1.101.2.7.4.2
rndManagedTimerw
DisplayString
.1.3.6.1.4.1.9.6.1.101.2.8
rndManagedDaterw
DisplayString
.1.3.6.1.4.1.9.6.1.101.2.9
rndBaseBootVersionro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.9.6.1.101.2.10
genGroup
OBJECT IDENTIFIER
.1.3.6.1.4.1.9.6.1.101.2.11
genGroupHWVersionro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.9.6.1.101.2.11.1
genGroupConfigurationSymbolro
DisplayString
.1.3.6.1.4.1.9.6.1.101.2.11.2
genGroupHWStatusro
Enumeration
.1.3.6.1.4.1.9.6.1.101.2.11.3
rndBasePhysicalAddressro
PhysAddress (SNMPv2-TC)
.1.3.6.1.4.1.9.6.1.101.2.12
rndSoftwareFile
OBJECT IDENTIFIER
.1.3.6.1.4.1.9.6.1.101.2.13
rndActiveSoftwareFileTable
SEQUENCE OF RndActiveSoftwareFileEntry
.1.3.6.1.4.1.9.6.1.101.2.13.1
rndActiveSoftwareFileEntry
RndActiveSoftwareFileEntry
.1.3.6.1.4.1.9.6.1.101.2.13.1.1
rndUnitNumberrw
INTEGER
.1.3.6.1.4.1.9.6.1.101.2.13.1.1.1
rndActiveSoftwareFilero
RlImageIdType
.1.3.6.1.4.1.9.6.1.101.2.13.1.1.2
rndActiveSoftwareFileAfterResetrw
Enumeration
.1.3.6.1.4.1.9.6.1.101.2.13.1.1.3
rlResetStatusro
Bits
.1.3.6.1.4.1.9.6.1.101.2.13.2
rndImageSizero
INTEGER
.1.3.6.1.4.1.9.6.1.101.2.14
rndBackupConfigurationEnabledro
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.9.6.1.101.2.15
rndImageInfo
OBJECT IDENTIFIER
.1.3.6.1.4.1.9.6.1.101.2.16
rndImageInfoTable
SEQUENCE OF RndImageInfoEntry
.1.3.6.1.4.1.9.6.1.101.2.16.1
rndImageInfoEntry
RndImageInfoEntry
.1.3.6.1.4.1.9.6.1.101.2.16.1.1
rndStackUnitNumberrw
INTEGER
.1.3.6.1.4.1.9.6.1.101.2.16.1.1.1
rndImage1Namero
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.9.6.1.101.2.16.1.1.2
rndImage2Namero
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.9.6.1.101.2.16.1.1.3
rndImage1Versionro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.9.6.1.101.2.16.1.1.4
rndImage2Versionro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.9.6.1.101.2.16.1.1.5
rndImage1Datero
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.9.6.1.101.2.16.1.1.6
rndImage2Datero
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.9.6.1.101.2.16.1.1.7
rndImage1Timero
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.9.6.1.101.2.16.1.1.8
rndImage2Timero
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.9.6.1.101.2.16.1.1.9
rndImage1Descriptionrw
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.9.6.1.101.2.16.1.1.10
rndImage2Descriptionrw
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.9.6.1.101.2.16.1.1.11
rlComponentsInfoTable
SEQUENCE OF RlComponentsInfoEntry
.1.3.6.1.4.1.9.6.1.101.2.16.2
rlComponentsInfoEntry
RlComponentsInfoEntry
.1.3.6.1.4.1.9.6.1.101.2.16.2.1
rlComponentsInfoStackUnitNumber
INTEGER
.1.3.6.1.4.1.9.6.1.101.2.16.2.1.1
rlComponentsInfoImageId
RlImageIdType
.1.3.6.1.4.1.9.6.1.101.2.16.2.1.2
rlComponentsInfoComponent
DisplayString
.1.3.6.1.4.1.9.6.1.101.2.16.2.1.3
rlComponentsInfoBaselinero
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.9.6.1.101.2.16.2.1.5

CISCOSB-DEVICEPARAMS-MIB Technical Reference Overview

The CISCOSB-DEVICEPARAMS-MIB SNMP MIB module published by Cisco defines 64 managed OID objects, including 47 scalar/column metrics, 5 SNMP tables, and 0 trap/notification events anchored at base OID .1.3.6.1.4.1.9.6.1.101.2. Key tabular structures include rlComponentsInfoTable, rlMridTable, rndActiveSoftwareFileTable, rndCommunityTable, rndImageInfoTable.

Key OID Definitions in CISCOSB-DEVICEPARAMS-MIB

rndDeviceParamsMODULE-IDENTITYnot-accessible
.1.3.6.1.4.1.9.6.1.101.2

This private MIB module defines general Parameters private MIBs.

rlComponentsInfoTableSEQUENCEnot-accessible
.1.3.6.1.4.1.9.6.1.101.2.16.2

The table contains information about components, their streams and baselines in the device images.

rlMridTableSEQUENCEnot-accessible
.1.3.6.1.4.1.9.6.1.101.2.7.3

The MRID related configurations table of the agent

rndActiveSoftwareFileTableSEQUENCEnot-accessible
.1.3.6.1.4.1.9.6.1.101.2.13.1

The (conceptual) table listing the active software file of the requested unit.

rndCommunityTableSEQUENCEnot-accessible
.1.3.6.1.4.1.9.6.1.101.2.7.2

The community table of the agent

rndImageInfoTableSEQUENCEnot-accessible
.1.3.6.1.4.1.9.6.1.101.2.16.1

The table contains information about images.

genGroupConfigurationSymbolDisplayStringread-only
.1.3.6.1.4.1.9.6.1.101.2.11.2

Defines the Configuration Symbol attached to any hardware module manufactured by LANNET. One single character A..Z defines the CS version.

genGroupHWStatusINTEGERread-only
.1.3.6.1.4.1.9.6.1.101.2.11.3

This attribute describes the status of the group hardware as detected by the sensors software.

genGroupHWVersionDisplayStringread-only
.1.3.6.1.4.1.9.6.1.101.2.11.1

Defines the HW version of the product.

rlResetStatusBITSread-only
.1.3.6.1.4.1.9.6.1.101.2.13.2

A bit mask that specifies system status before reset action is preformed. Reset is prohibited in stackable products if the images selected after reboot are not of the same release version in ALL stack units. Downgrade status specifies that there are some actions to be preformed on the CDB file before reset is preformed. 0x0 - OK 0x1 - noStackIntegrity 0x2 - downgrade

rndBackupConfigurationEnabledTruthValueread-only
.1.3.6.1.4.1.9.6.1.101.2.15

Specifies whether the device supports backup-config parameters in lcli commands.

rndBaseBootVersionDisplayStringread-only
.1.3.6.1.4.1.9.6.1.101.2.10

Defines the boot version of the product.

rndBasePhysicalAddressPhysAddressread-only
.1.3.6.1.4.1.9.6.1.101.2.12

The Base physical (MAC) address of the device.

rndBrgFeaturesOCTETread-only
.1.3.6.1.4.1.9.6.1.101.2.5

A bit mask that defines the features supported by a particular configuration of this network element: __________________________________________ | Byte 1|Byte 2 |Byte 3 | ....|Byte 20 | |87654321| | 87654321| |________|_______________________________| Byte1 : bit1: TX Block mask bit2: Source Routing Encapulation bit3: SNA/SDLC bit4: Frame Relay bit5: SNMP bit6: LAN Manager bit7: High Performance bit8: Translation Byte2 : bit1: DEC Router bit2: IPX Router bit3: IP Router Byte3 : bit1: Dial Up Backup bit2: COD bit3: FACS bit4: Load Balance bit5: Remote Configuration bit6: RIP 2 bit7: OSPF bit8: IPX RIP/SAP Filter Byte4 : bit1: BootP Server bit2: BootP Client bit3: Compression bit4: V25.bis bit5: ISDN bit6: CODv2 bit7: NSPF bit8: UDP Relay Byte5 bit1:VirtualLAN bit2:Static IP Multicast bit3:IP Redundancy bit4:CCM2 bit5:ISDN Bonding bit6:Backup Link Selection -- for the VAN/Rdapter ver 4.0 bit7:IP/IPX Forwarding -- for the WANgate ver 4.0 bit8:Improved COD Byte6 bit1: Server Disptacher bit2: ISDN_US -- for the VANSX/WANGATE ver 5.0 bit3: PPP bit4: IP Rip Filter -- for Vgate3 bit5: Zero Hop Routing -- for Vgate3 bit6: ISDN Japan bit7: PPP-Security Byte7 bit1: With unmanaged Switch bit2: 2 LANs bit3: OSPF Ver 2.0 bit4: FACS Ver 2.0 bit5: Multiple WEB Farm bit6: Backup Server bit7: Check Connectivity bit8: WSD multiplexing Byte8 bit1: MRT3 bit2: WSD Redundancy bit3: DHCP Server bit4: WSD Connection Limit bit5: WSD Distributed System bit6: WSD Load Report bit7: WSD super farm bit8: RadWiz leased line Byte9 bit1: PPP IP address negotiaton bit2: DNS bit3: Nat bit4: WSD Static proximity bit5: WSD Dynamic proximity bit6: WSD Proxy bit7: WSD Proximity client bit8: MAC Load balancing Byte10 bit1: Unnum Inf bit2: Power Supply redundancy bit3: MRT PPP Compression bit4: ZHR Apolo bit5: Copy port bit6: UDP Relay 2.0 bit7: NVRAM bit8: URL table Byte11 bit1: URL super farm bit2: NAT on LAN bit3: Remote Con bit4: AP5000 bit5: Session tracking bit6: Mirroring bit7: Alias IP bit8: CSD Nat Byte12 bit1: content check bit2: mlb virtual ip bit3: reserved CISCOSB bit4: csd nat exception bit5: statistics monitor bit6: reserved-for-radware

rndBrgLicenseOCTETread-write
.1.3.6.1.4.1.9.6.1.101.2.6

This parameter is used for entering a s/w license number for a device. A separate license number is supplied for each device.

rndBrgVersionDisplayStringread-only
.1.3.6.1.4.1.9.6.1.101.2.4

The bridge version.

rndBridgeTypeINTEGERread-only
.1.3.6.1.4.1.9.6.1.101.2.1

Identification of the switch001 bridge type.

rndErrorDescDisplayStringread-only
.1.3.6.1.4.1.9.6.1.101.2.3.1

A textual description of the enterprise-specific trap sent to the Network Management Station by the switch001 managed device.

rndErrorSeverityINTEGERread-only
.1.3.6.1.4.1.9.6.1.101.2.3.2

The severity type of the enterprise-specific trap sent to the Network Management Station by the switch001 managed device.

rndImageSizeINTEGERread-only
.1.3.6.1.4.1.9.6.1.101.2.14

Max number of sectors currently allocated for image(s).

rndInactiveArpTimeOutINTEGERread-write
.1.3.6.1.4.1.9.6.1.101.2.2

This variable defines the maximum time period that can pass between ARP requests concerning an entry in the ARP table. After this time period, the entry is deleted from the table.

rndIpHostManagementIfIndexINTEGERread-write
.1.3.6.1.4.1.9.6.1.101.2.7.4.2

if supported manage , indicate ifindex, if 0 thaen disable

rndIpHostManagementSupportedTruthValueread-only
.1.3.6.1.4.1.9.6.1.101.2.7.4.1

ifindex manage supported.

rndManagedDateDisplayStringread-write
.1.3.6.1.4.1.9.6.1.101.2.9

The date will be sent in the format ddmmyy

More MIBs from Cisco

Browse all CiscoMIBs →
CISCO-UNIFIED-COMPUTING-COMPUTE-MIB

The CISCO-UNIFIED-COMPUTING-COMPUTE-MIB provides SNMP-based monitoring and management of Cisco UCS compute blades, servers, and chassis components, exposing critical metrics such as CPU utilization, memory usage, thermal sensor readings, power supply status, and interface operational states. This module enables granular visibility into the health and performance of the Cisco Unified Computing System's compute subsystems for capacity planning and fault isolation.

1401 objects→
CISCO-UNIFIED-COMPUTING-STORAGE-MIB

The CISCO-UNIFIED-COMPUTING-STORAGE-MIB facilitates SNMP-based monitoring and management of storage subsystems, including Fibre Channel and iSCSI interfaces, within the Cisco Unified Computing System (UCS) fabric interconnects and blade servers. It exposes critical operational metrics such as port status, error counters, throughput statistics, and storage controller health states to enable granular visibility into the storage infrastructure.

1295 objects→
CISCO-UNIFIED-COMPUTING-VNIC-MIB

The CISCO-UNIFIED-COMPUTING-VNIC-MIB enables SNMP-based monitoring and management of Virtual Network Interface Card (vNIC) attributes, including operational status, traffic counters, and binding configurations, within the Cisco Unified Computing System (UCS) fabric interconnects and server blades.

1161 objects→
CERENT-GENERIC-MIB

SNMP MIB module

984 objects→
CISCO-UNIFIED-COMPUTING-BIOS-MIB

The CISCO-UNIFIED-COMPUTING-BIOS-MIB enables SNMP-based monitoring and configuration of BIOS-level parameters, firmware versions, and hardware initialization states within Cisco Unified Computing System (UCS) servers. It provides visibility into critical server boot diagnostics, BIOS settings, and hardware readiness indicators to facilitate low-level infrastructure management and troubleshooting.

937 objects→
CISCO-UNIFIED-COMPUTING-ETHER-MIB

The CISCO-UNIFIED-COMPUTING-ETHER-MIB provides SNMP management interfaces for monitoring Ethernet interface statistics, link states, and error counters on Cisco Unified Computing System (UCS) fabric interconnects and blade server line cards. This module enables the tracking of physical layer connectivity, port throughput, and packet error rates within the UCS Ethernet switching infrastructure.

920 objects→