CISCO-WAN-OPTIMIZATION-MIB
AI MIB Summary
The CISCO-WAN-OPTIMIZATION-MIB provides instrumentation for monitoring Cisco WAAS (Wide Area Application Services) devices to track Data Redundancy Elimination (DRE), Lempel-Ziv (LZ) compression, and TCP protocol optimization statistics across Application Optimizers for protocols such as SMB, CIFS, HTTP, NFS, SSL, and MAPI. It enables the measurement of peer-to-peer WAN link performance metrics, including traffic flow optimization (TFO) session counts, connection states, and application-specific latency and throughput data to validate bandwidth reduction and response time improvements.
This MIB is for managing Wide Area Network (WAN) Optimization systems. The objective of WAN optimization system is to reduce as much traffic as possible on WAN link and improve the application response time for various applications, which gets affected due to bandwidth, packet loss, congestion and latency limitations of WAN link. WAN optimization system is generally peer based system. They are located at both end of WAN link and peer with each other to perform optimization. This MIB provides instrumentation for monitoring statistics for various features implemented for WAN optimization. WAN optimization features includes TCP protocol optimizations and various Application Optimizers (AOs). AOs include SMB AO, HTTP AO, CIFS AO, NFS AO, MAPI AO, VIDEO AO, SSL AO and EPM AO.
Acronyms and Terminology used in this MIB are: AO : Application Optimizer TFO : Traffic Flow Optimization SMB : Server Message Block CIFS : Common Internet File System HTTP : Hyper Text Transfer Protocol NFS : Network File System SSL : Secure Socket Layer MAPI : Messaging Application Programming Interface EPM : End Point Mapper RA : Read Ahead MD : Meta Data PT : Pass Through AD : Auto Discovery RTT : Round Trip Time Conn : Connections File Server : SMB/CIFS file server peer : It refers to peer WAN optimization system located on other end of WAN and registered with this device to optimize the traffic. SharePoint : SharePoint is a Microsoft Application that provides a collaborative environment for using Microsoft Office and related applications. Typical deployments of Microsoft SharePoint use one or more SharePoint servers in a server farm for scalability. The actual data for the various documents, etc. are usually stored in a backend database. The SharePoint server(s) communicate with the backend database using SharePoint Back-end protocols. Clients (either Microsoft Office Applications like Word, Excel, PowerPoint or Web Browsers) typically connect to the SharePoint server and communicate using SOAP over HTTP. Fast Connections : End to end connections which uses existing TCP connection over WAN and reconstructs only LAN connection is fast connection. DRE : Data Redundancy Elimination. LZ : Lemple-Ziv data compression. PLZ : Persistent Lemple-Ziv data compression.
Main OID:
ciscoWanOptimizationMIB.1.3.6.1.4.1.9.9.762
231
Objects
Active
Status
8
Dependencies
Imported Objects
Objects
231 total| Object Name |
|---|
ciscoWanOptimizationMIBThis MIB is for managing Wide Area Network (WAN) Optimization
systems. The objective of WAN optimization system is to reduce
as much traffic as possible on WAN link and improve the
application response time for various applications, which gets
affected due to bandwidth, packet loss, congestion and latency
limitations of WAN link. WAN optimization system is generally
peer based system. They are located at both end of WAN link and
peer with each other to perform optimization. This MIB provides
instrumentation for monitoring statistics for various features
implemented for WAN optimization. WAN optimization features
includes TCP protocol optimizations and various Application
Optimizers (AOs). AOs include SMB AO, HTTP AO, CIFS AO, NFS AO,
MAPI AO, VIDEO AO, SSL AO and EPM AO.
Acronyms and Terminology used in this MIB are:
AO : Application Optimizer
TFO : Traffic Flow Optimization
SMB : Server Message Block
CIFS : Common Internet File System
HTTP : Hyper Text Transfer Protocol
NFS : Network File System
SSL : Secure Socket Layer
MAPI : Messaging Application Programming Interface
EPM : End Point Mapper
RA : Read Ahead
MD : Meta Data
PT : Pass Through
AD : Auto Discovery
RTT : Round Trip Time
Conn : Connections
File Server : SMB/CIFS file server
peer : It refers to peer WAN optimization system
located on other end of WAN and registered
with this device to optimize the traffic.
SharePoint : SharePoint is a Microsoft Application that
provides a collaborative environment for
using Microsoft Office and related
applications. Typical deployments of
Microsoft SharePoint use one or more
SharePoint servers in a server farm for
scalability. The actual data for the various
documents, etc. are usually stored in a
backend database. The SharePoint server(s)
communicate with the backend database using
SharePoint Back-end protocols. Clients
(either Microsoft Office Applications like
Word, Excel, PowerPoint or Web Browsers)
typically connect to the SharePoint server
and communicate using SOAP over HTTP.
Fast Connections : End to end connections which uses existing
TCP connection over WAN and reconstructs
only LAN connection is fast connection.
DRE : Data Redundancy Elimination.
LZ : Lemple-Ziv data compression.
PLZ : Persistent Lemple-Ziv data compression. MODULE-IDENTITY .1.3.6.1.4.1.9.9.762 |
ciscoWanOptimizationMIBNotifs OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.762.0 |
cwoTfoConnectionOverloadThis notification indicates that the device has reached its
limit of number of connections it can optimize. No new
connections will be picked-up for optimization, while the device
is in this state. NOTIFICATION-TYPE .1.3.6.1.4.1.9.9.762.0.1 |
cwoPeerOverloadThis notification indicates the device has reached its limit of
number of peer devices with which it can optimize connections.
While the device is in this state, connections from new peer
device will not be picked-up for optimization. NOTIFICATION-TYPE .1.3.6.1.4.1.9.9.762.0.2 |
cwoCpuThrottlingOnThis notification indicates that the device has detected that
the current CPU utilization (stored in
cpmCPUTotalMonIntervalValue) is higher than the
cwoGeneralCpuThrottleHigh. As a result the device has entered
into a throttling mode due to which connections under
optimization may experience slowdown. This notification is
generated the moment it occurs after a time lapse of 30 minutes
since the previous notification. NOTIFICATION-TYPE .1.3.6.1.4.1.9.9.762.0.3 |
cwoCpuThrottlingOffThis notification indicates that device has detected that the
CPU utilization of device (stored in
cpmCPUTotalMonIntervalValue) has fallen below the
cwoGeneralCpuThrottleLow from cwoGeneralCpuThrottleHigh. As a
result the device has come out of the throttling mode and there
should not be any negative impact of CPU usage on connection
under optimization. This notification is generated the moment it
occurs after a time lapse of 30 minutes since the previous
notification. NOTIFICATION-TYPE .1.3.6.1.4.1.9.9.762.0.4 |
cwoLicenseExpiredThis notification is generated when the license on the system
expires after the period for which it was installed. NOTIFICATION-TYPE .1.3.6.1.4.1.9.9.762.0.5 |
cwoLicenseRevokedThis notification is generated when a requested revoke ticket
is obtained. This ticket could have been requested in order to
move the license to a different system. NOTIFICATION-TYPE .1.3.6.1.4.1.9.9.762.0.6 |
cwoLicenseDeletedThis notification is generated when the license on the system
is cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.9.9.762.0.7 |
ciscoWanOptimizationMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.762.1 |
cwoGeneral OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.762.1.1 |
cwoGeneralActivePeersThis object contains total number of active peers connected
with this device for WAN optimization.ro Gauge32 UNITS "number of peers" .1.3.6.1.4.1.9.9.762.1.1.1 |
cwoGeneralMaxActivePeersThis object contains maximum number of peers that this device
can peer with for WAN optimization.ro Unsigned32 .1.3.6.1.4.1.9.9.762.1.1.2 |
cwoGeneralCpuThrottleHighThis object contains high threshold (percentage) value of CPU
usage of system when WAN optimization feature is running. The
current CPU utilization, stored in cpmCPUTotalMonIntervalValue,
is compared against this value. A cwoCpuThrottlingOn
notification is generated whenever cpmCPUTotalMonIntervalValue
exceeds cwoGeneralCpuThrottleHigh for
cwoGeneralCpuThrottlPeriod.rw Unsigned32 .1.3.6.1.4.1.9.9.762.1.1.3 |
cwoGeneralCpuThrottleLowThis object contains low threshold (percentage) value of CPU
usage of system when WAN optimization feature is running. The
current CPU utilization, stored in cpmCPUTotalMonIntervalValue,
is
compared against this value. A cwoCpuThrottlingOff notification
is generated if a prior cwoCpuThrottlingOn notification was
generated, and the current value of cpmCPUTotalMonIntervalValue
is below cwoGeneralCpuThrottleLow for
cwoGeneralCpuThrottlPeriod.
Note that the value of cwoGeneralCpuThrottleLow must be less
than
or equal to cwoGeneralCpuThrottleHigh.rw Unsigned32 .1.3.6.1.4.1.9.9.762.1.1.4 |
cwoGeneralCpuThrottlPeriodThis Object indicates CPU throttling observation period. The
value of the CPU utilization for this period is stored in
cpmCPUTotalMonIntervalValue. If the value of
cpmCPUTotalMonIntervalValue object is above
cwoGeneralCPUThrottleHigh, a cwoCPUThrottlingOn notification
is sent. If it is below cwoGeneralCPUThrottleLow, a
cwoCPUThrottlingOff notification is sent to the NMS.rw TimeInterval (SNMPv2-TC) .1.3.6.1.4.1.9.9.762.1.1.5 |
cwoTfo OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.762.1.2 |
cwoTfoStats OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.762.1.2.1 |
cwoTfoStatsTotalOptConnThis object contains total number of TCP connections optimized
since TFO was started or its statistics were last reset.ro Counter64 .1.3.6.1.4.1.9.9.762.1.2.1.1 |
cwoTfoStatsActiveOptConnThis object contains number of currently active TCP connections
getting optimized.ro CounterBasedGauge64 (HCNUM-TC) .1.3.6.1.4.1.9.9.762.1.2.1.2 |
cwoTfoStatsMaxActiveConnThis object contains maximum number of active TCP connections
that this device can optimize.ro Unsigned64 (CISCO-TC) .1.3.6.1.4.1.9.9.762.1.2.1.3 |
cwoTfoStatsActiveOptTCPPlusConnThis object contains number of active TCP connections going
through TCP plus other optimization.ro CounterBasedGauge64 (HCNUM-TC) .1.3.6.1.4.1.9.9.762.1.2.1.4 |
cwoTfoStatsActiveOptTCPOnlyConnThis object contains number of active connections going through
only TCP optimization.ro CounterBasedGauge64 (HCNUM-TC) .1.3.6.1.4.1.9.9.762.1.2.1.5 |
cwoTfoStatsActiveOptTCPPrepConnThis object contains number of current active TCP connections
that were originated by an accelerator to acquire data in
anticipation of its future use.ro CounterBasedGauge64 (HCNUM-TC) .1.3.6.1.4.1.9.9.762.1.2.1.6 |
cwoTfoStatsActiveADConnThis object contains number of current active TCP connections
in the auto-discovery state.ro CounterBasedGauge64 (HCNUM-TC) .1.3.6.1.4.1.9.9.762.1.2.1.7 |
cwoTfoStatsReservedConnThis object contains number of TCP connections reserved for the
MAPI accelerator.ro Unsigned64 (CISCO-TC) .1.3.6.1.4.1.9.9.762.1.2.1.8 |
cwoTfoStatsPendingConnThis object contains number of TCP connections, which are
pending in queue of connections to be optimized.ro CounterBasedGauge64 (HCNUM-TC) .1.3.6.1.4.1.9.9.762.1.2.1.9 |
cwoTfoStatsActivePTConnThis object contains number of active Pass Through TCP
connections. Connections which are not selected for optimization
are called Pass Through.ro CounterBasedGauge64 (HCNUM-TC) .1.3.6.1.4.1.9.9.762.1.2.1.10 |
cwoTfoStatsTotalNormalClosedConnThis object contains total number of optimized TCP connections
which were closed normally since TFO was started or its
statistics were last reset.ro Counter64 .1.3.6.1.4.1.9.9.762.1.2.1.11 |
cwoTfoStatsResetConnThis object contains total number of optimized TCP connections,
which are reset since TFO was started or its statistics were
last reset.ro Counter64 .1.3.6.1.4.1.9.9.762.1.2.1.12 |
cwoTfoStatsLoadStatusThis object indicates the load status of Traffic Flow Optimizer
(TFO).ro CwoLoadStates .1.3.6.1.4.1.9.9.762.1.2.1.13 |
cwoAo OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.762.1.3 |
cwoAoStatsTableThis table gives statistics of Application Optimizers. SEQUENCE OF CwoAoStatsEntry .1.3.6.1.4.1.9.9.762.1.3.1 |
cwoAoStatsEntryAn entry containing statistics for particular Application
optimizer. An entry will be created during system startup and
will include AOs, which are supported by this system. CwoAoStatsEntry .1.3.6.1.4.1.9.9.762.1.3.1.1 |
cwoAoStatsNameThis object represents name of the AO. CwoAoName .1.3.6.1.4.1.9.9.762.1.3.1.1.1 |
cwoAoStatsIsConfiguredThis object indicates whether the AO is configured or not. If
AO is not configured then the operational state
(cwoAoStatsOperationalState) of AO would be 'shutdown'.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.762.1.3.1.1.2 |
cwoAoStatsIsLicensedThis object indicates whether license for the AO is valid or
not. If License for AO is not valid then operational state
(cwoAoStatsOperationalState) of AO would be 'shutdown'.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.762.1.3.1.1.3 |
cwoAoStatsOperationalStateThis object indicates operational state of the AO. If AO is not
configured or license is not valid for this AO then operational
state of AO would be 'shutdown'.ro CwoAoOperationalState .1.3.6.1.4.1.9.9.762.1.3.1.1.4 |
cwoAoStatsStartUpTimeThis object contains date and time when AO was started. This
object will hold NULL value when AO is in shutdown state.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.9.9.762.1.3.1.1.5 |
cwoAoStatsLastResetTimeThis object contains date and time when statistics of AO were
set to reset last time. When statistics of AO set to reset then
all statistics counters will also set to reset. This object will
hold NULL value when AO is in shutdown state.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.9.9.762.1.3.1.1.6 |
cwoAoStatsTotalHandledConnsThis object contains total number of connections handled by AO
since it was started or its statistics were last reset.ro Counter32 .1.3.6.1.4.1.9.9.762.1.3.1.1.7 |
cwoAoStatsTotalOptConnsThis object contains total number of connections optimized by
AO since it was started or its statistics were last reset.ro Counter32 .1.3.6.1.4.1.9.9.762.1.3.1.1.8 |
cwoAoStatsTotalHandedOffConnsThis object contains total number of connections handed off to
Generic optimization by AO since it was started or its
statistics last reset.ro Counter32 .1.3.6.1.4.1.9.9.762.1.3.1.1.9 |
cwoAoStatsTotalDroppedConnsThis object contains total number of connections dropped by AO
since it was started or its statistics were last reset.ro Counter32 .1.3.6.1.4.1.9.9.762.1.3.1.1.10 |
cwoAoStatsActiveOptConnsThis object contains number of active connections which are
getting optimized by AO.ro Gauge32 .1.3.6.1.4.1.9.9.762.1.3.1.1.11 |
cwoAoStatsPendingConnsThis object contains number of connections currently pending in
queue of connections to be optimized by AO.ro Gauge32 .1.3.6.1.4.1.9.9.762.1.3.1.1.12 |
cwoAoStatsMaxActiveOptConnsThis object contains maximum number of active TCP connections
that AO can optimize.ro Unsigned32 .1.3.6.1.4.1.9.9.762.1.3.1.1.13 |
cwoAoStatsLoadStatusThis object indicates the load status of an AO.ro CwoLoadStates .1.3.6.1.4.1.9.9.762.1.3.1.1.14 |
cwoAoStatsBwOptThis object indicates the percentage bandwidth optimization
achieved due to optimizations done by an AO.ro Gauge32 .1.3.6.1.4.1.9.9.762.1.3.1.1.15 |
cwoAoSmbxStats OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.762.1.3.2 |
cwoAoSmbxStatsBytesReadCacheThis object contains total number of bytes read from SMB
Application Optimizer cache (Read-ahead and Metadata cache)
since it was started.
Discontinuities in the value of this counter can occur at
re-initialization of the SMB AO. The last discontinuity time is
indicated by the value of cwoAoStatsLastResetTime for the SMB
AO.ro Counter64 UNITS "bytes" .1.3.6.1.4.1.9.9.762.1.3.2.1 |
cwoAoSmbxStatsBytesWriteCacheThis object contains total number of bytes written to SMB
Application Optimizer cache (Read-ahead and Metadata) since it
was started.
Discontinuities in the value of this counter can occur at
re-initialization of the SMB AO. The last discontinuity time is
indicated by the value of cwoAoStatsLastResetTime for the SMB
AO.ro Counter64 UNITS "bytes" .1.3.6.1.4.1.9.9.762.1.3.2.2 |
cwoAoSmbxStatsBytesReadServerThis object contains total number of bytes read from file
servers by SMB Application Optimizer since it was started.
Discontinuities in the value of this counter can occur at
re-initialization of the SMB AO. The last discontinuity time is
indicated by the value of cwoAoStatsLastResetTime for the SMB
AO.ro Counter64 UNITS "bytes" .1.3.6.1.4.1.9.9.762.1.3.2.3 |
cwoAoSmbxStatsBytesWriteServerThis object contains total number of bytes written to file
servers by SMB Application Optimizer since it was started.
Discontinuities in the value of this counter can occur at
re-initialization of the SMB AO. The last discontinuity time is
indicated by the value of cwoAoStatsLastResetTime for the SMB
AO.ro Counter64 UNITS "bytes" .1.3.6.1.4.1.9.9.762.1.3.2.4 |
cwoAoSmbxStatsBytesReadClientThis object contains total number of bytes read by SMB
Application Optimizer clients since it was started.
Discontinuities in the value of this counter can occur at
re-initialization of the SMB AO. The last discontinuity time is
indicated by the value of cwoAoStatsLastResetTime for the SMB
AO.ro Counter64 UNITS "bytes" .1.3.6.1.4.1.9.9.762.1.3.2.5 |
cwoAoSmbxStatsBytesWriteClientThis object contains total number of bytes written by SMB
Application optimizer clients since it was started.
Discontinuities in the value of this counter can occur at
re-initialization of the SMB AO. The last discontinuity time is
indicated by the value of cwoAoStatsLastResetTime for the SMB
AO.ro Counter64 UNITS "bytes" .1.3.6.1.4.1.9.9.762.1.3.2.6 |
cwoAoSmbxStatsProcessedReqsThis object contains total number of requests processed by SMB
Application Optimizer since it was started.
Discontinuities in the value of this counter can occur at
re-initialization of the SMB AO. The last discontinuity time is
indicated by the value of cwoAoStatsLastResetTime for the SMB
AO.ro Counter64 UNITS "requests" .1.3.6.1.4.1.9.9.762.1.3.2.7 |
cwoAoSmbxStatsActiveReqsThis object contains total number of active requests getting
processed by SMB Application Optimizer.ro CounterBasedGauge64 UNITS "requests" .1.3.6.1.4.1.9.9.762.1.3.2.8 |
cwoAoSmbxStatsTotalTimedOutReqsThis object contains total number of requests timed out in SMB
Application Optimizer since it was started.
Discontinuities in the value of this counter can occur at
re-initialization of the SMB AO. The last discontinuity time is
indicated by the value of cwoAoStatsLastResetTime for the SMB
AO.ro Unsigned64 UNITS "requests" .1.3.6.1.4.1.9.9.762.1.3.2.9 |
cwoAoSmbxStatsTotalRemoteReqsThis object contains total number of SMB requests sent to
remote file server since SMB AO was started.
Discontinuities in the value of this counter can occur at
re-initialization of the SMB AO. The last discontinuity time is
indicated by the value of cwoAoStatsLastResetTime for the SMB
AO.ro Counter64 UNITS "requests" .1.3.6.1.4.1.9.9.762.1.3.2.10 |
cwoAoSmbxStatsTotalLocalReqsThis object contains total number of SMB requests served
locally by SMB Application Optimizer since it was started.
Discontinuities in the value of this counter can occur at
re-initialization of the SMB AO. The last discontinuity time is
indicated by the value of cwoAoStatsLastResetTime for the SMB
AO.ro Counter64 UNITS "requests" .1.3.6.1.4.1.9.9.762.1.3.2.11 |
cwoAoSmbxStatsRemoteAvgTimeThis object contains average duration of time taken by SMB
Application Optimizer to process all remote requests since it
was started.
Discontinuities in the value of this counter can occur at
re-initialization of the SMB AO. The last discontinuity time is
indicated by the value of cwoAoStatsLastResetTime for the SMB
AO.ro CiscoMilliSeconds (CISCO-TC) .1.3.6.1.4.1.9.9.762.1.3.2.12 |
cwoAoSmbxStatsLocalAvgTimeThis object contains average duration of time taken by SMB
Application Optimizer to process all local requests since it
was started.
Discontinuities in the value of this counter can occur at
re-initialization of the SMB AO. The last discontinuity time is
indicated by the value of cwoAoStatsLastResetTime for the SMB
AO.ro CiscoMilliSeconds (CISCO-TC) .1.3.6.1.4.1.9.9.762.1.3.2.13 |
cwoAoSmbxStatsRACacheHitCountThis object contains SMB Application Optimizer Read Ahead Cache
hit count since SMB AO was started.
Discontinuities in the value of this counter can occur at
re-initialization of the SMB AO. The last discontinuity time is
indicated by the value of cwoAoStatsLastResetTime for the SMB
AO.ro Counter64 .1.3.6.1.4.1.9.9.762.1.3.2.14 |
cwoAoSmbxStatsMDCacheHitCountThis object contains SMB Application Optimizer Metadata cache
hit count since SMB AO was started.
Discontinuities in the value of this counter can occur at
re-initialization of the SMB AO. The last discontinuity time is
indicated by the value of cwoAoStatsLastResetTime for the SMB
AO.ro Counter64 .1.3.6.1.4.1.9.9.762.1.3.2.15 |
cwoAoSmbxStatsRACacheHitRateThis object contains SMB Application Optimizer Read Ahead cache
hit rate since it was started.
Discontinuities in the value of this counter can occur at
re-initialization of the SMB AO. The last discontinuity time is
indicated by the value of cwoAoStatsLastResetTime for the SMB
AO.ro Gauge32 .1.3.6.1.4.1.9.9.762.1.3.2.16 |
cwoAoSmbxStatsMDCacheHitRateThis object contains SMB Application Optimizer Metadata cache
hit rate since it was started.
Discontinuities in the value of this counter can occur at
re-initialization of the SMB AO. The last discontinuity time is
indicated by the value of cwoAoStatsLastResetTime for the SMB
AO.ro Gauge32 .1.3.6.1.4.1.9.9.762.1.3.2.17 |
cwoAoSmbxStatsMaxRACacheSizeThis object contains Maximum disk space that can be allocated
for Read Ahead data in SMB Application Optimizer cache.ro Unsigned64 UNITS "bytes" .1.3.6.1.4.1.9.9.762.1.3.2.18 |
cwoAoSmbxStatsMaxMDCacheSizeThis object contains maximum disk space that can be allocated
for Metadata in SMB Application Optimizer cache.ro Unsigned64 UNITS "bytes" .1.3.6.1.4.1.9.9.762.1.3.2.19 |
cwoAoSmbxStatsMDCacheSizeThis object contains current size of Metadata cache in SMB
Application Optimizer.ro CounterBasedGauge64 UNITS "bytes" .1.3.6.1.4.1.9.9.762.1.3.2.20 |
cwoAoSmbxStatsRAEvictedAgeThis object contains amount of time spent in the SMB
Application Optimizer Read Ahead cache by the resource that was
last evicted since last update. If this amount is too short or
too long, it is recommended to modify the size of the cache.ro CiscoMilliSeconds (CISCO-TC) .1.3.6.1.4.1.9.9.762.1.3.2.21 |
cwoAoSmbxStatsRTTThis object contains total round trip time for all SMB
connections since it was started.
Discontinuities in the value of this counter can occur at
re-initialization of the SMB AO. The last discontinuity time is
indicated by the value of cwoAoStatsLastResetTime for the SMB
AO.ro TimeIntervalSec (CISCO-TC) .1.3.6.1.4.1.9.9.762.1.3.2.22 |
cwoAoSmbxStatsTotalRespTimeSavingThis object contains total response time saved due to SMB AO
optimizations since it was started.
Discontinuities in the value of this counter can occur at
re-initialization of the SMB AO. The last discontinuity time is
indicated by the value of cwoAoStatsLastResetTime for the SMB
AO.ro TimeIntervalSec (CISCO-TC) .1.3.6.1.4.1.9.9.762.1.3.2.23 |
cwoAoSmbxStatsOpenFilesThis object contains number of files currently opened by SMB
Application Optimizer.ro Gauge32 UNITS "files" .1.3.6.1.4.1.9.9.762.1.3.2.24 |
cwoAoSmbxStatsTotalFilesInRACacheThis object contains total number of files in SMB Application
optimizer Read Ahead cache.ro Gauge32 UNITS "files" .1.3.6.1.4.1.9.9.762.1.3.2.25 |
cwoAoSmbxStatsRdL4SignWANBytesThis object contains the total number of Layer 4 (L4) optimized
signed bytes read from WAN by SMB Application Optimizer since
the SMB Application Optimizer was started. L4 optimization
comprises of TFO, DRE and LZ optimizations.
Discontinuities in the value of this counter can occur at
re-initialization of the SMB AO. The last discontinuity time is
indicated by the value of cwoAoStatsLastResetTime for the SMB
AO.ro Counter64 .1.3.6.1.4.1.9.9.762.1.3.2.26 |
cwoAoSmbxStatsWrL4SignWANBytesThis object contains the total number of Layer 4 (L4) optimized
signed bytes written to WAN by SMB Application Optimizer since
SMB Application Optimizer was started. L4 optimization comprises
of TFO, DRE and LZ optimizations.
Discontinuities in the value of this counter can occur at
re-initialization of the SMB AO. The last discontinuity time is
indicated by the value of cwoAoStatsLastResetTime for the SMB
AO.ro Counter64 .1.3.6.1.4.1.9.9.762.1.3.2.27 |
cwoAoSmbxStatsRdSignLANBytesThis object contains the total number of signed bytes read from
LAN by SMB Application Optimizer since the SMB Application
Optimizer was started.
Discontinuities in the value of this counter can occur at
re-initialization of the SMB AO. The last discontinuity time is
indicated by the value of cwoAoStatsLastResetTime for the SMB
AO.ro Counter64 .1.3.6.1.4.1.9.9.762.1.3.2.28 |
cwoAoSmbxStatsWrSignLANBytesThis object contains the total number of original signed bytes
written to LAN by SMB Application Optimizer since SMB
Application Optimizer was started.
Discontinuities in the value of this counter can occur at
re-initialization of the SMB AO. The last discontinuity time is
indicated by the value of cwoAoStatsLastResetTime for the SMB
AO.ro Counter64 .1.3.6.1.4.1.9.9.762.1.3.2.29 |
cwoAoHttpxStats OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.762.1.3.3 |
cwoAoHttpxStatsTotalSavedTimeThis object indicates total time saved due to optimizations
done by HTTP AO since it was started.
Discontinuities in the value of this counter can occur at
re-initialization of the HTTP AO. The last discontinuity time is
indicated by the value of cwoAoStatsLastResetTime for the HTTP
AO.ro CiscoMilliSeconds UNITS "milliseconds" .1.3.6.1.4.1.9.9.762.1.3.3.1 |
cwoAoHttpxStatsTotalRTTThis object indicates total Round Trip Time (RTT) for all the
connections going through HTTP AO since it was started.
Discontinuities in the value of this counter can occur at
re-initialization of the HTTP AO. The last discontinuity time is
indicated by the value of cwoAoStatsLastResetTime for the HTTP
AO.ro CiscoMilliSeconds UNITS "milliseconds" .1.3.6.1.4.1.9.9.762.1.3.3.2 |
cwoAoHttpxStatsTotalMDCMTimeThis object indicates total time for Meta Data Cache Misses
(MDCM) for HTTP AO since it was started.
Discontinuities in the value of this counter can occur at
re-initialization of the HTTP AO. The last discontinuity time is
indicated by the value of cwoAoStatsLastResetTime for the HTTP
AO.ro CiscoMilliSeconds UNITS "milliseconds" .1.3.6.1.4.1.9.9.762.1.3.3.3 |
cwoAoHttpxStatsEstSavedTimeThis object indicates percentage estimated time saved due to
optimizations done by HTTP AO since it was started.ro Gauge32 .1.3.6.1.4.1.9.9.762.1.3.3.4 |
cwoAoHttpxStatsTotalSPSessionsThis object indicates the total number of SharePoint Optimized
HTTP sessions. This counter is incremented for every
session on which SharePoint optimization can be performed. An
HTTP session is tagged as a SharePoint Session based on the
information present in the HTTP request.ro Counter64 UNITS "sessions" .1.3.6.1.4.1.9.9.762.1.3.3.5 |
cwoAoHttpxStatsTotalSPPFSessionsThis object indicates the total number of SharePoint Pre-fetch
optimized HTTP sessions. This counter is incremented
for every session on which SharePoint pre-fetch optimization
can be performed. An HTTP session is tagged as a SharePoint
pre-fetch Session based on the information present in the HTTP
request. A pre-fetch operation is one where the edge WAAS
device fetches the next set of data (which it anticipates the
client will request later) from the server based on the current
HTTP Request information.ro Counter64 UNITS "sessions" .1.3.6.1.4.1.9.9.762.1.3.3.6 |
cwoAoHttpxStatsTotalSPPFObjectsThis object indicates the total number of pre-fetched objects
served locally for SharePoint pre-fetch sessions. The edge WAAS
device maintains a local cache where the pre-fetched responses
are saved. This object is incremented whenever the SharePoint
client request is served from the pre-fetch cache.ro Counter64 UNITS "requests" .1.3.6.1.4.1.9.9.762.1.3.3.7 |
cwoAoHttpxStatsTotalSPRTTSavedThis object contains total Round Trip Time (RTT) saved due to
SharePoint pre-fetch optimizations since SharePoint pre-fetch
optimization was started.
Discontinuities in the value of this counter can occur at
re-initialization of the HTTP AO. The last discontinuity time is
indicated by the value of cwoAoStatsLastResetTime for the HTTP
AO.ro Counter64 UNITS "milliseconds" .1.3.6.1.4.1.9.9.762.1.3.3.8 |
cwoAoHttpxStatsTotalSPPFMissTimeThis object indicates total time for SharePoint pre-fetch
Cache Misses since SharePoint pre-fetch optimization was
started.
Discontinuities in the value of this counter can occur at
re-initialization of the HTTP AO. The last discontinuity time is
indicated by the value of cwoAoStatsLastResetTime for the HTTP
AO.ro Counter64 UNITS "milliseconds" .1.3.6.1.4.1.9.9.762.1.3.3.9 |
cwoAoHttpxStatsAKC OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.762.1.3.3.10 |
cwoAoHttpxStatsAKCBypassEntry OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.762.1.3.3.10.1 |
cwoAoHttpxStatsAKCBypassCacheTransThis object indicates the Akamai connected cache statistics for
total number of cache-bypass transactions that were handled in
bypass mode transparent cache profile. When bypass mode
transparent cache profile is set for a particular hostname, the
caching for the hostname specified in a rule is suppressed. In
this mode, the cache-engine turns off caching for one or more
configured sites.ro Counter64 UNITS "requests" .1.3.6.1.4.1.9.9.762.1.3.3.10.1.1 |
cwoAoHttpxStatsAKCBypassRespBytesThis object indicates the total number of response bytes saved
for cache-hit HTTP transactions in bypass mode transparent
cache profile.ro Counter64 UNITS "bytes" .1.3.6.1.4.1.9.9.762.1.3.3.10.1.2 |
cwoAoHttpxStatsAKCBypassCacheTransPercentThis object indicates the percentage of total number of
cache-hit HTTP transactions in bypass mode transparent cache
profile.ro Gauge32 .1.3.6.1.4.1.9.9.762.1.3.3.10.1.3 |
cwoAoHttpxStatsAKCBypassRespBytesPercentThis object indicates the percentage of total number of
response bytes saved for cache-hit HTTP transactions in bypass
mode transparent cache profile.ro Gauge32 .1.3.6.1.4.1.9.9.762.1.3.3.10.1.4 |
cwoAoHttpxStatsAKCBypassCacheRespTimeSavedThis object indicates the total response time saved for
cache-hit HTTP transactions in bypass mode transparent cache
profile, in milli-seconds.ro CiscoMilliSeconds UNITS "milliseconds" .1.3.6.1.4.1.9.9.762.1.3.3.10.1.5 |
cwoAoHttpxStatsAKCBypassAvgCacheRespTimeSavedThis object indicates the average response time saved per
cache-hit HTTP transaction in bypass mode transparent cache
profile, in milli-seconds.ro CiscoMilliSeconds UNITS "milliseconds" .1.3.6.1.4.1.9.9.762.1.3.3.10.1.6 |
cwoAoHttpxStatsAKCBypassRespTimeSavedPercentThis object indicates the percentage of total response time
saved for cache-hit HTTP transactions in bypass mode
transparent cache profile.ro Gauge32 .1.3.6.1.4.1.9.9.762.1.3.3.10.1.7 |
cwoAoHttpxStatsAKCStdEntry OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.762.1.3.3.10.2 |
cwoAoHttpxStatsAKCStdCacheTransThis object indicates the Akamai connected cache statistics for
total number of cache-hit transactions that were served from
cache in standard mode transparent cache profile. This is a
default mode.In this mode, the cache engine also follows the
RFC-2616 behavior for cache control headers with the exception
of not honoring the client cache override behavior.ro Counter64 UNITS "requests" .1.3.6.1.4.1.9.9.762.1.3.3.10.2.1 |
cwoAoHttpxStatsAKCStdRespBytesThis object indicates the total number of response bytes saved
for cache-hit HTTP transactions in standard mode transparent
cache profile.ro Counter64 UNITS "bytes" .1.3.6.1.4.1.9.9.762.1.3.3.10.2.2 |
cwoAoHttpxStatsAKCStdCacheTransPercentThis object indicates the percentage of total number of
cache-hit HTTP transactions in standard mode transparent cache
profile.ro Gauge32 .1.3.6.1.4.1.9.9.762.1.3.3.10.2.3 |
cwoAoHttpxStatsAKCStdRespBytesPercentThis object indicates the percentage of total number of
response bytes saved for cache-hit HTTP transactions in standard
mode transparent cache profile.ro Gauge32 .1.3.6.1.4.1.9.9.762.1.3.3.10.2.4 |
cwoAoHttpxStatsAKCStdCacheRespTimeSavedThis object indicates the total response time saved for
cache-hit HTTP transactions in standard mode transparent cache
profile, in milli-seconds.ro CiscoMilliSeconds UNITS "milliseconds" .1.3.6.1.4.1.9.9.762.1.3.3.10.2.5 |
cwoAoHttpxStatsAKCStdAvgCacheRespTimeSavedThis object indicates the average response time saved per
cache-hit HTTP transaction in standard mode transparent cache
profile, in milli-seconds.ro CiscoMilliSeconds UNITS "milliseconds" .1.3.6.1.4.1.9.9.762.1.3.3.10.2.6 |
cwoAoHttpxStatsAKCStdRespTimeSavedPercentThis object indicates the percentage of total response time
saved for cache-hit HTTP transactions in standard mode
transparent cache profile.ro Gauge32 .1.3.6.1.4.1.9.9.762.1.3.3.10.2.7 |
cwoAoHttpxStatsAKCBasicEntry OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.762.1.3.3.10.3 |
cwoAoHttpxStatsAKCBasicCacheTransThis object indicates the Akamai connected cache statistics for
total number of cache-hit transactions that were served from
cache in basic mode transparent cache profile. In this mode, the
cache engine works in strict RFC-2616 behavior, and therefore,
only caches responses that are marked explicitly as cacheable
with cache-control headers or responses that have an expiry
header to service and accelerate traffic from a datacenter to a
branch office over any type of IP network.ro Counter64 UNITS "requests" .1.3.6.1.4.1.9.9.762.1.3.3.10.3.1 |
cwoAoHttpxStatsAKCBasicRespBytesThis object indicates the total number of response bytes saved
for cache-hit HTTP transactions in basic mode transparent cache
profile.ro Counter64 UNITS "bytes" .1.3.6.1.4.1.9.9.762.1.3.3.10.3.2 |
cwoAoHttpxStatsAKCBasicCacheTransPercentThis object indicates the percentage of total number of
cache-hit HTTP transactions in basic mode transparent cache
profile.ro Gauge32 .1.3.6.1.4.1.9.9.762.1.3.3.10.3.3 |
cwoAoHttpxStatsAKCBasicRespBytesPercentThis object indicates the percentage of total number of
response bytes saved for cache-hit HTTP transactions in basic
mode transparent cache profile.ro Gauge32 .1.3.6.1.4.1.9.9.762.1.3.3.10.3.4 |
cwoAoHttpxStatsAKCBasicCacheRespTimeSavedThis object indicates the total response time saved for
cache-hit HTTP transactions in basic mode transparent cache
profile, in milli-seconds.ro CiscoMilliSeconds UNITS "milliseconds" .1.3.6.1.4.1.9.9.762.1.3.3.10.3.5 |
cwoAoHttpxStatsAKCBasicAvgCacheRespTimeSavedThis object indicates the average response time saved per
cache-hit HTTP transaction in basic mode transparent cache
profile, in milli-seconds.ro CiscoMilliSeconds UNITS "milliseconds" .1.3.6.1.4.1.9.9.762.1.3.3.10.3.6 |
cwoAoHttpxStatsAKCBasicRespTimeSavedPercentThis object indicates the percentage of total response time
saved for cache-hit HTTP transactions in basic mode transparent
cache profile.ro Gauge32 .1.3.6.1.4.1.9.9.762.1.3.3.10.3.7 |
cwoAoHttpxStatsAKCAdvEntry OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.762.1.3.3.10.4 |
cwoAoHttpxStatsAKCAdvCacheTransThis object indicates the Akamai connected cache statistics for
total number of cache-hit transactions that were served from
cache in advanced mode transparent cache profile. In advanced
mode,the cache engine caches media types more aggressively, and
caches all object types for longer time (when there is no
explicit expiration time).ro Counter64 UNITS "requests" .1.3.6.1.4.1.9.9.762.1.3.3.10.4.1 |
cwoAoHttpxStatsAKCAdvRespBytesThis object indicates the total number of response bytes saved
for cache-hit HTTP transactions in advanced mode transparent
cache profile.ro Counter64 UNITS "bytes" .1.3.6.1.4.1.9.9.762.1.3.3.10.4.2 |
cwoAoHttpxStatsAKCAdvCacheTransPercentThis object indicates the percentage of total number of
cache-hit HTTP transactions in advanced mode transparent cache
profile.ro Gauge32 .1.3.6.1.4.1.9.9.762.1.3.3.10.4.3 |
cwoAoHttpxStatsAKCAdvRespBytesPercentThis object indicates the percentage of total number of
response bytes saved for cache-hit HTTP transactions in
advanced mode transparent cache profile.ro Gauge32 .1.3.6.1.4.1.9.9.762.1.3.3.10.4.4 |
cwoAoHttpxStatsAKCAdvCacheRespTimeSavedThis object indicates the total response time saved for
cache-hit HTTP transactions in advanced mode transparent cache
profile, in milli-seconds.ro CiscoMilliSeconds UNITS "milliseconds" .1.3.6.1.4.1.9.9.762.1.3.3.10.4.5 |
cwoAoHttpxStatsAKCAdvAvgCacheRespTimeSavedThis object indicates the average response time saved per
cache-hit HTTP transaction in advanced mode transparent cache
profile, in milli-seconds.ro CiscoMilliSeconds UNITS "milliseconds" .1.3.6.1.4.1.9.9.762.1.3.3.10.4.6 |
cwoAoHttpxStatsAKCAdvRespTimeSavedPercentThis object indicates the percentage of total response time
saved for cache-hit HTTP transactions in advanced mode
transparent cache profile.ro Gauge32 .1.3.6.1.4.1.9.9.762.1.3.3.10.4.7 |
cwoAoHttpxStatsAKCTotalEntry OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.762.1.3.3.10.5 |
cwoAoHttpxStatsAKCTotalCacheTransThis object indicates the aggregation of all the statistics
related to various Akamai Connected Cache profile types -
Bypass, Standard, Basic and Advanced.ro Counter64 UNITS "requests" .1.3.6.1.4.1.9.9.762.1.3.3.10.5.1 |
cwoAoHttpxStatsAKCTotalRespBytesThis object indicates the total number of response bytes saved
for cache-hit HTTP transactions in all transparent cache
profile modes.ro Counter64 UNITS "bytes" .1.3.6.1.4.1.9.9.762.1.3.3.10.5.2 |
cwoAoHttpxStatsAKCTotalCacheTransPercentThis object indicates the percentage of total number of
cache-hit HTTP transactions in all transparent cache profile
modes.ro Gauge32 .1.3.6.1.4.1.9.9.762.1.3.3.10.5.3 |
cwoAoHttpxStatsAKCTotalRespBytesPercentThis object indicates the percentage of total number of
response bytes saved for cache-hit HTTP transactions in all
transparent cache profile modes.ro Gauge32 .1.3.6.1.4.1.9.9.762.1.3.3.10.5.4 |
cwoAoHttpxStatsAKCTotalCacheRespTimeSavedThis object indicates the total response time saved for
cache-hit HTTP transactions in all transparent cache profile
modes, in milli-seconds.ro CiscoMilliSeconds UNITS "milliseconds" .1.3.6.1.4.1.9.9.762.1.3.3.10.5.5 |
cwoAoHttpxStatsAKCTotalAvgCacheRespTimeSavedThis object indicates the average response time saved per
cache-hit HTTP transaction in all transparent cache profile
modes, in milli-seconds.ro CiscoMilliSeconds UNITS "milliseconds" .1.3.6.1.4.1.9.9.762.1.3.3.10.5.6 |
cwoAoHttpxStatsAKCTotalRespTimeSavedPercentThis object indicates the percentage of total response time
saved for Cache-hit HTTP transactions in all transparent cache
profile modes.ro Gauge32 .1.3.6.1.4.1.9.9.762.1.3.3.10.5.7 |
cwoAoHttpxStatsAKCPrepTableThis table gives statistics of Akamai Preposition tasks. SEQUENCE OF CwoAoHttpxStatsAKCPrepEntry .1.3.6.1.4.1.9.9.762.1.3.3.10.6 |
cwoAoHttpxStatsAKCPrepEntryAn entry containing statistics for a particular Akamai
Preposition task. CwoAoHttpxStatsAKCPrepEntry .1.3.6.1.4.1.9.9.762.1.3.3.10.6.1 |
cwoAoHttpxStatsAKCPrepTaskNameThis object indicates the name of the preposition task in
Akamai connected cache preposition operation. OCTET STRING .1.3.6.1.4.1.9.9.762.1.3.3.10.6.1.1 |
cwoAoHttpxStatsAKCPrepStatusThis object indicates the current status of the preposition
task in Akamai connected cache preposition operation.ro CwoHttpAKCPrepStatus .1.3.6.1.4.1.9.9.762.1.3.3.10.6.1.2 |
cwoAoHttpxStatsAKCPrepCacheStoreBytesThis object indicates the total number of response bytes stored
in the cache for a particular preposition task in Akamai
connected cache preposition operation.ro Gauge32 UNITS "bytes" .1.3.6.1.4.1.9.9.762.1.3.3.10.6.1.3 |
cwoAoHttpxStatsAKCPrepUncacheStoreBytesThis object indicates the total number of response bytes not
stored in the cache for a particular preposition task in Akamai
connected cache preposition operation.ro Gauge32 UNITS "bytes" .1.3.6.1.4.1.9.9.762.1.3.3.10.6.1.4 |
cwoAoMapixStats OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.762.1.3.4 |
cwoAoMapixStatsUnEncrALRTThis object indicates Average Local Response Time (ALRT) for
unencrypted connections of MAPI AO since it was started.ro CiscoMilliSeconds UNITS "milliseconds" .1.3.6.1.4.1.9.9.762.1.3.4.1 |
cwoAoMapixStatsEncrALRTThis object indicates Average Local Response Time (ALRT) for
encrypted connections of MAPI AO since it was started.ro CiscoMilliSeconds UNITS "milliseconds" .1.3.6.1.4.1.9.9.762.1.3.4.2 |
cwoAoMapixStatsUnEncrARRTThis object indicates Average Remote Response Time (ARRT) for
unencrypted connections of MAPI AO since it was started.ro CiscoMilliSeconds UNITS "milliseconds" .1.3.6.1.4.1.9.9.762.1.3.4.3 |
cwoAoMapixStatsEncrARRTThis object indicates Average Remote Response Time (ARRT) for
encrypted connections of MAPI AO since it was started.ro CiscoMilliSeconds UNITS "milliseconds" .1.3.6.1.4.1.9.9.762.1.3.4.4 |
cwoAoMapixStatsTotalUnEncrLRsThis object indicates total requests served locally for
unencrypted connections by MAPI AO since it was started.
Discontinuities in the value of this counter can occur at
re-initialization of the MAPI AO. The last discontinuity time is
indicated by the value of cwoAoStatsLastResetTime for the MAPI
AO.ro Counter64 UNITS "requests" .1.3.6.1.4.1.9.9.762.1.3.4.5 |
cwoAoMapixStatsTotalEncrLRsThis object indicates total requests served locally for
encrypted connections by MAPI AO since it was started.
Discontinuities in the value of this counter can occur at
re-initialization of the MAPI AO. The last discontinuity time is
indicated by the value of cwoAoStatsLastResetTime for the MAPI
AO.ro Counter64 UNITS "requests" .1.3.6.1.4.1.9.9.762.1.3.4.6 |
cwoAoMapixStatsTotalUnEncrRRsThis object indicates total Remote Requests(RR) served by
remote servers for unencrypted connections of MAPI AO since it
was started.
Discontinuities in the value of this counter can occur at
re-initialization of the MAPI AO. The last discontinuity time is
indicated by the value of cwoAoStatsLastResetTime for the MAPI
AO.ro Counter64 UNITS "requests" .1.3.6.1.4.1.9.9.762.1.3.4.7 |
cwoAoMapixStatsTotalEncrRRsThis object indicates total Remote Requests(RR) served by
remote servers for encrypted connections by MAPI AO since it
was started.
Discontinuities in the value of this counter can occur at
re-initialization of the MAPI AO. The last discontinuity time is
indicated by the value of cwoAoStatsLastResetTime for the MAPI
AO.ro Counter64 UNITS "requests" .1.3.6.1.4.1.9.9.762.1.3.4.8 |
cwoAoMapixStatsUnEncrAvgRedTimeThis object indicates average time reduced for unencrypted
connections due to optimizations done by MAPI AO since it was
started.
Discontinuities in the value of this counter can occur at
re-initialization of the MAPI AO. The last discontinuity time is
indicated by the value of cwoAoStatsLastResetTime for the MAPI
AO.ro CiscoMilliSeconds UNITS "milliseconds" .1.3.6.1.4.1.9.9.762.1.3.4.9 |
cwoAoMapixStatsEncrAvgRedTimeThis object indicates average time reduced for encrypted
connections due to optimizations done by MAPI AO since it was
started.
Discontinuities in the value of this counter can occur at
re-initialization of the MAPI AO. The last discontinuity time is
indicated by the value of cwoAoStatsLastResetTime for the MAPI
AO.ro CiscoMilliSeconds UNITS "milliseconds" .1.3.6.1.4.1.9.9.762.1.3.4.10 |
cwoAoNfsxStats OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.762.1.3.5 |
cwoAoNfsxStatsALRTThis object indicates Average Local Response Time (ALRT) for
NFS AO since it was started.ro CiscoMilliSeconds UNITS "milliseconds" .1.3.6.1.4.1.9.9.762.1.3.5.1 |
cwoAoNfsxStatsARRTThis object indicates Average Remote Response Time (ARRT) for
NFS AO since it was started.ro CiscoMilliSeconds UNITS "milliseconds" .1.3.6.1.4.1.9.9.762.1.3.5.2 |
cwoAoNfsxStatsTotalLRsThis object indicates total requests served locally by NFS AO
since it was started.
Discontinuities in the value of this counter can occur at
re-initialization of the NFS AO. The last discontinuity time is
indicated by the value of cwoAoStatsLastResetTime for the NFS
AO.ro Counter64 UNITS "requests" .1.3.6.1.4.1.9.9.762.1.3.5.3 |
cwoAoNfsxStatsTotalRRsThis object indicates total Remote Requests (RR) served by
remote servers for NFS AO since it was started.
Discontinuities in the value of this counter can occur at
re-initialization of the NFS AO. The last discontinuity time is
indicated by the value of cwoAoStatsLastResetTime for the NFS
AO.ro Counter64 UNITS "requests" .1.3.6.1.4.1.9.9.762.1.3.5.4 |
cwoAoNfsxStatsEstTimeSavedThis object indicates percentage estimated time saved due to
optimizations done by NFS AO since it was started.ro Gauge32 .1.3.6.1.4.1.9.9.762.1.3.5.5 |
cwoAoVideoxStats OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.762.1.3.6 |
cwoAoVideoxStatsTotalInBytesThis object indicates total incoming bytes for Video AO since
it was started.
Discontinuities in the value of this counter can occur at
re-initialization of the Video AO. The last discontinuity time
is indicated by the value of cwoAoStatsLastResetTime for the
Video AO.rodeprecated Counter64 UNITS "bytes" .1.3.6.1.4.1.9.9.762.1.3.6.1 |
cwoAoVideoxStatsTotalOutBytesThis object indicates total outgoing bytes for Video AO since
it was started.
Discontinuities in the value of this counter can occur at
re-initialization of the Video AO. The last discontinuity time
is indicated by the value of cwoAoStatsLastResetTime for the
Video AO.rodeprecated Counter64 UNITS "bytes" .1.3.6.1.4.1.9.9.762.1.3.6.2 |
cwoAoCifsxStats OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.762.1.3.7 |
cwoAoCifsxStatsTotalReadBytesThis object indicates the total bytes read by clients
from the client side (via cache or remotely) using CIFS AO
since CIFS AO was started.
Discontinuities in the value of this counter can occur at
re-initialization of the CIFS AO. The last discontinuity time
is
indicated by the value of cwoAoStatsLastResetTime for the CIFS
AO.rodeprecated Counter32 UNITS "kilo-bytes" .1.3.6.1.4.1.9.9.762.1.3.7.1 |
cwoAoCifsxStatsTotalWrittenBytesThis object indicates the total bytes written to the
client-side using the CIFS AO since CIFS AO was started.
Discontinuities in the value of this counter can occur at
re-initialization of the CIFS AO. The last discontinuity time
is
indicated by the value of cwoAoStatsLastResetTime for the CIFS
AO.rodeprecated Counter32 UNITS "kilo-bytes" .1.3.6.1.4.1.9.9.762.1.3.7.2 |
cwoAoCifsxStatsTotalRemoteReqsThis object indicates the total requests sent to remote file
server since CIFS AO was started.
Discontinuities in the value of this counter can occur at
re-initialization of the CIFS AO. The last discontinuity time
is
indicated by the value of cwoAoStatsLastResetTime for the CIFS
AO.rodeprecated Counter32 UNITS "requests" .1.3.6.1.4.1.9.9.762.1.3.7.3 |
cwoAoCifsxStatsTotalLocalReqsThis object indicates the total number requests served locally
by CIFS AO since it was started.
Discontinuities in the value of this counter can occur at
re-initialization of the CIFS AO. The last discontinuity time
is
indicated by the value of cwoAoStatsLastResetTime for the CIFS
AO.rodeprecated Counter32 UNITS "requests" .1.3.6.1.4.1.9.9.762.1.3.7.4 |
cwoAoCifsxStatsTotalRemoteTimeThis object indicates the total duration of time taken by CIFS
AO to process all remote requests since CIFS AO was started.
Discontinuities in the value of this counter can occur at
re-initialization of the CIFS AO. The last discontinuity time
is
indicated by the value of cwoAoStatsLastResetTime for the CIFS
AO.rodeprecated CiscoMilliSeconds UNITS "milliseconds" .1.3.6.1.4.1.9.9.762.1.3.7.5 |
cwoAoCifsxStatsTotalLocalTimeThis object indicates the total duration of time taken by CIFS
AO to process all local requests since CIFS AO was started.
Discontinuities in the value of this counter can occur at
re-initialization of the CIFS AO. The last discontinuity time
is
indicated by the value of cwoAoStatsLastResetTime for the CIFS
AO.rodeprecated CiscoMilliSeconds UNITS "milliseconds" .1.3.6.1.4.1.9.9.762.1.3.7.6 |
cwoAoCifsxStatsConnectedSessionsThis object indicates the number of currently connected CIFS
sessions.rodeprecated Gauge32 UNITS "sessions" .1.3.6.1.4.1.9.9.762.1.3.7.7 |
cwoAoCifsxStatsOpenFilesThis object indicates the number of currently open CIFS files.rodeprecated Gauge32 UNITS "files" .1.3.6.1.4.1.9.9.762.1.3.7.8 |
cwoAoCifsxStatsMaxCacheSizeThis object indicates the maximum disk space (in KB) allocated
for data in the CIFS AO cache.rodeprecated Gauge32 UNITS "kilo-bytes" .1.3.6.1.4.1.9.9.762.1.3.7.9 |
cwoAoCifsxStatsCurrentCacheSizeThis object indicates the amount of disk space (in KB),
currently being used for data in the CIFS AO cache.rodeprecated Gauge32 UNITS "kilo-bytes" .1.3.6.1.4.1.9.9.762.1.3.7.10 |
cwoAoCifsxStatsMaxCacheResourcesThis object indicates the maximum number of cache resources
(files and directories) supported by the CIFS AO cache,
regardless of the size of these resources.rodeprecated Gauge32 UNITS "files" .1.3.6.1.4.1.9.9.762.1.3.7.11 |
cwoAoCifsxStatsCacheResourcesThis object indicates the number of cache resources (files
and directories) currently held in the CIFS AO cache.rodeprecated Gauge32 UNITS "files" .1.3.6.1.4.1.9.9.762.1.3.7.12 |
cwoAoCifsxStatsEvictedResourcesThis object indicates the number of cache resources (files and
directories) that have been evicted from the cache since CIFS
AO was started.
Discontinuities in the value of this counter can occur at
re-initialization of the CIFS AO. The last discontinuity time
is
indicated by the value of cwoAoStatsLastResetTime for the CIFS
AO.rodeprecated Counter32 UNITS "files" .1.3.6.1.4.1.9.9.762.1.3.7.13 |
cwoAoCifsxStatsLastEvictedTimeThis object indicates the time when cache resources (files and
directories) were last evicted from the CIFS AO cache. 00:00 is
displayed if no cache resources have been evicted since CIFS AO
was started.rodeprecated TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.9.9.762.1.3.7.14 |
cwoAoCifsxStatsVolHiWatermarkThis object indicates the disk usage high watermark in
percentage that triggers the eviction of resources from the
CIFS AO cache.rodeprecated Gauge32 .1.3.6.1.4.1.9.9.762.1.3.7.15 |
cwoAoCifsxStatsVolLoWatermarkThis object indicates the target disk usage low watermark
percentage to be reached via cache eviction when triggered by
cfVolHiWatermark. When this low watermark is reached, cache
eviction stops.rodeprecated Gauge32 .1.3.6.1.4.1.9.9.762.1.3.7.16 |
cwoAoCifsxStatsAmntHiWatermarkThis object indicates the target percentage of maximum cache
resources (defined by cfMaxCacheResources) that triggers the
eviction of resources from the CIFS AO cache.rodeprecated Gauge32 .1.3.6.1.4.1.9.9.762.1.3.7.17 |
cwoAoCifsxStatsAmntLoWatermarkThis object indicates the target percentage of maximum cache
resources (defined by cfMaxCacheResources) to be reached via
cache eviction when triggered by cfAmntHiWatermark. When this
low watermark is reached, cache eviction stops.rodeprecated Gauge32 .1.3.6.1.4.1.9.9.762.1.3.7.18 |
cwoAoCifsxStatsEvictedAgeThis object indicates the amount of time spent in the CIFS AO
cache by the resource that was last evicted. If this amount is
too short or too long, it is recommended to modify the size of
the cache.rodeprecated TimeInterval (SNMPv2-TC) .1.3.6.1.4.1.9.9.762.1.3.7.19 |
cwoAoCifsxStatsEvictedLastAccessThis object indicates the value of sysUpTime when the resource,
which was last evicted from the CIFS AO cache has been last
accessed.rodeprecated TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.9.9.762.1.3.7.20 |
cwoAoCifsxStatsFFTotalReqsThis object contains total number of FindFirst (FF) requests
since CIFS AO was started.
Discontinuities in the value of this counter can occur at
re-initialization of the CIFS AO. The last discontinuity time
is
indicated by the value of cwoAoStatsLastResetTime for the CIFS
AO.rodeprecated Counter64 UNITS "requests" .1.3.6.1.4.1.9.9.762.1.3.7.21 |
cwoAoCifsxStatsFFRemoteReqsThis object contains total number of FindFirst (FF) requests
sent to the remote file-server since CIFS AO was started.
Discontinuities in the value of this counter can occur at
re-initialization of the CIFS AO. The last discontinuity time
is
indicated by the value of cwoAoStatsLastResetTime for the CIFS
AO.rodeprecated Counter64 UNITS "requests" .1.3.6.1.4.1.9.9.762.1.3.7.22 |
cwoAoCifsxStatsFFLocalRespTimeThis object contains the average local response time for
FindFirst (FF) requests replied locally since CIFS AO was
started.
Discontinuities in the value of this counter can occur at
re-initialization of the CIFS AO. The last discontinuity time
is
indicated by the value of cwoAoStatsLastResetTime for the CIFS
AO.rodeprecated CiscoMilliSeconds UNITS "milliseconds" .1.3.6.1.4.1.9.9.762.1.3.7.23 |
cwoAoCifsxStatsFFRemoteRespTimeThis object contains the average remote response time for
FindFirst (FF) requests replied remotely since CIFS AO was
started.
Discontinuities in the value of this counter can occur at
re-initialization of the CIFS AO. The last discontinuity time
is
indicated by the value of cwoAoStatsLastResetTime for the CIFS
AO.rodeprecated CiscoMilliSeconds UNITS "milliseconds" .1.3.6.1.4.1.9.9.762.1.3.7.24 |
cwoAoCifsxStatsDirResourcesThis object contains the total number of currently allocated
Directory Resources in CIFS AO.rodeprecated Gauge32 UNITS "files" .1.3.6.1.4.1.9.9.762.1.3.7.25 |
cwoApp OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.762.1.4 |
cwoAppStatsTableThis table lists the statistics for applications configured on
the wan optimization system. SEQUENCE OF CwoAppStatsEntry .1.3.6.1.4.1.9.9.762.1.4.1 |
cwoAppStatsEntryAn entry describing statistics for applications configured on
the WAN optimization system. The WAN opimitization system
creates an entry when a user configures an application for
optimization. The WAN optimization system deletes an entry, when
user removes the application from the configuration. CwoAppStatsEntry .1.3.6.1.4.1.9.9.762.1.4.1.1 |
cwoAppStatsAppNameThis object indicates the name of a particular application,
which is configured for optimization. SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.9.9.762.1.4.1.1.1 |
cwoAppStatsOriginalBytesThis object indicates total original traffic (uncompressed) in
bytes of a particular application that has entered into the
system.ro Counter64 UNITS "bytes" .1.3.6.1.4.1.9.9.762.1.4.1.1.2 |
cwoAppStatsOptimizedBytesThis object indicates total optimized traffic in bytes of a
particular application.ro Counter64 UNITS "bytes" .1.3.6.1.4.1.9.9.762.1.4.1.1.3 |
cwoAppStatsPTBytesThis object indicates total pass-through traffic in bytes of a
particular application.ro Counter64 UNITS "bytes" .1.3.6.1.4.1.9.9.762.1.4.1.1.4 |
cwoPmap OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.762.1.5 |
cwoPmapStatsTableThis table lists the staistics for active policy maps. SEQUENCE OF CwoPmapStatsEntry .1.3.6.1.4.1.9.9.762.1.5.1 |
cwoPmapStatsEntryAn entry describing statistics related with an active policy
map of a given type. The WAN optimization system creates/deletes
an entry for a policy map when it is made active/inactive
through configuration changes. CwoPmapStatsEntry .1.3.6.1.4.1.9.9.762.1.5.1.1 |
cwoPmapStatsTypeThis object indicates type of the policy map. CwoTypes .1.3.6.1.4.1.9.9.762.1.5.1.1.1 |
cwoPmapStatsNameThis object indicates name of the policy map. SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.9.9.762.1.5.1.1.2 |
cwoPmapStatsDescrThis object indicates the descriptive information of the policy
map configured on the WAN optimization system. If the
description is not configured for a given policy map then this
string will contain a NULL string.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.9.9.762.1.5.1.1.3 |
cwoPmapStatsTotalConnsThis object indicates total number of connections processed by
the policy map since it is active.ro Counter64 UNITS "connections" .1.3.6.1.4.1.9.9.762.1.5.1.1.4 |
cwoPmapStatsTotalBytesThis object indicates total bytes processed by the policy map
since it is active.ro Counter64 UNITS "kilo-bytes" .1.3.6.1.4.1.9.9.762.1.5.1.1.5 |
cwoPmapStatsTotalPTConnsThis object indicates total connections, which are made
as pass-through due to some reason by the policy map since it
is
active.ro Counter64 UNITS "connections" .1.3.6.1.4.1.9.9.762.1.5.1.1.6 |
cwoPmapStatsTotalPTBytesThis object indicates total bytes which are made pass-through
by the policy map since it is active.ro Counter64 UNITS "kilo-bytes" .1.3.6.1.4.1.9.9.762.1.5.1.1.7 |
cwoCmap OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.762.1.6 |
cwoCmapStatsTableThis table lists the staistics for class maps associated with
the active policy map. SEQUENCE OF CwoCmapStatsEntry .1.3.6.1.4.1.9.9.762.1.6.1 |
cwoCmapStatsEntryAn entry describes statistics for the class maps associated
with active policy maps. A new entry will be created for the
class map when a new class map gets associated to the policy map
through the configuration changes. An entry will be deleted,
when the class map is disassociated from the active policy map
through the configuration changes. CwoCmapStatsEntry .1.3.6.1.4.1.9.9.762.1.6.1.1 |
cwoCmapStatsTypeThis object indicates the type of the class map. CwoTypes .1.3.6.1.4.1.9.9.762.1.6.1.1.1 |
cwoCmapStatsNameThis object indicates the name of the class map. SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.9.9.762.1.6.1.1.2 |
cwoCmapStatsDescrThis object indicates the descriptive information of the class
map configured on the WAN optimization system. If the
description is not configured for a given class map then this
string will contain a NULL string.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.9.9.762.1.6.1.1.3 |
cwoCmapStatsTotalConnsThis object indicates the total number of connections processed
by the class map.ro Counter64 UNITS "connections" .1.3.6.1.4.1.9.9.762.1.6.1.1.4 |
cwoCmapStatsTotalBytesThis object indicates the total bytes processed by the
class map.ro Counter64 UNITS "bytes" .1.3.6.1.4.1.9.9.762.1.6.1.1.5 |
cwoCmapStatsTotalPTConnsThis object indicates total connections, which are made
as pass-through due to some reason by the class map.ro Counter64 UNITS "connections" .1.3.6.1.4.1.9.9.762.1.6.1.1.6 |
cwoCmapStatsTotalPTBytesThis object indicates the total bytes which are made
pass-through by the class map.ro Counter64 UNITS "bytes" .1.3.6.1.4.1.9.9.762.1.6.1.1.7 |
cwoDre OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.762.1.7 |
cwoDreCacheStats OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.762.1.7.1 |
cwoDreCacheStatsStatusThis object describes the status of the portion of the disk
that is meant for DRE cache.ro CwoDreCacheStatus .1.3.6.1.4.1.9.9.762.1.7.1.1 |
cwoDreCacheStatsAgeThis object indicates the age of the oldest data present in the
DRE cache. For example, let us say that the portion of the disk
space allocated for DRE cache is 1GB and it is full. Now, if
new data is written onto this cache, then it would replace the
oldest data in the cache in First-In-First-Out (FIFO) order.
This object will specify what is the oldest data now present in
the cache. It takes the format of <x>d<x>h<x>m, where 'x' is an
integer number. For example, 6d20h30m means that the oldest
data's age is 6 days, 20 hours and 30 minutes.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.9.9.762.1.7.1.2 |
cwoDreCacheStatsTotalThis object indicates the percentage of available disk space
for DRE cache. For example, if the total disk space is 202 GB
and let us say that 20% of this disk space is allocated for DRE
cache, then this would mean that 40GB (40960 MB) out of the
total disk space is allocated for DRE cache.ro Unsigned32 UNITS "MB" .1.3.6.1.4.1.9.9.762.1.7.1.3 |
cwoDreCacheStatsUsedThis object indicates the percentage of DRE disk space
currently used out of the total space allocated for DRE cache.
For example, if the disk space allocated for DRE cache is
972798MB and if this object indicates 1%, it means that 9727 MB
is used and remaining approximate 963071 MB of disk space is
free.ro Gauge32 UNITS "percent" .1.3.6.1.4.1.9.9.762.1.7.1.4 |
cwoDreCacheStatsDataUnitUsageThis object indicates DRE disk space currently used by data
unit. DRE stores the actual data as data units in data block
and the metadata (chuck signature) in signature block.ro Unsigned32 UNITS "MB" .1.3.6.1.4.1.9.9.762.1.7.1.5 |
cwoDreCacheStatsReplacedOneHrDataUnitThis object indicates the amount of data unit replaced in the
last one hour in DRE cache. DRE stores the actual data as data
units in the cache data block. If new data units have to be
stored in the cache, the older data units in the cache are
evicted in First-In-First-Out (FIFO) order. This object would
also indicate how much new data units have been stored in the
DRE cache in the past one hour.ro Unsigned32 UNITS "MB" .1.3.6.1.4.1.9.9.762.1.7.1.6 |
cwoDreCacheStatsDataUnitAgeThis object indicates the age of oldest data unit in the data
block. DRE stores the actual data as data units in the data
block and the metadata (chuck signature) in signature block. If
new data unit should be written to the data block when it is
full, then the oldest data unit currently present in the data
block will be evicted. So this object would indicate the age
of the oldest data unit present in the DRE cache. It takes the
format of <x>d<x>h<x>m, where 'x' is an integer number. For
example, 6d20h30m means that the oldest data's age is 6 days, 20
hours and 30 minutes.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.9.9.762.1.7.1.7 |
cwoDreCacheStatsSigblockUsageThis object indicates DRE disk space currently used by sigblock
or signature block. DRE stores the actual data as data units in
cache data block and the metadata (chuck signature) in
signature block.ro Unsigned32 UNITS "MB" .1.3.6.1.4.1.9.9.762.1.7.1.8 |
cwoDreCacheStatsReplacedOneHrSigblockThis object indicates the amount of signatures replaced in last
one hour in sigblock. DRE stores the metadata (chuck signature)
in signature block of DRE cache. If new signatures have to be
stored in the cache, the older signatures in the sigblock are
evicted in First-In-First-Out (FIFO) order. This object would
also indicate how much new signatures have been stored in the
DRE cache sigblock in the past one hour.ro Unsigned32 UNITS "MB" .1.3.6.1.4.1.9.9.762.1.7.1.9 |
cwoDreCacheStatsSigblockAgeThis object indicates the age of oldest signature in the
sigblock. DRE stores the actual data as data units in the data
block and the metadata (chuck signature) in signature block.
If a new signature should be written to the sigblock when it is
full, then the oldest signature currently present in the
sigblock will be evicted. So this object would indicate the age
of the oldest signature present in the DRE cache. It takes the
format of <x>d<x>h<x>m, where 'x' is an integer number. For
example, 6d20h30m means that the oldest data's age is 6 days, 20
hours and 30 minutes.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.9.9.762.1.7.1.10 |
cwoDrePerfStats OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.762.1.7.2 |
cwoDrePerfStatsEncodeCompressionRatioThis object indicates the total compression ratio provided by
all the DRE components - DRE, LZ and PLZ (if applicable), during
the encoding process. It is the ratio of the number of bytes
entering the DRE module (from LAN side) and the number of bytes
exiting the DRE module (from WAN side). This object indicates
the value that is calculated since the last time the counter was
cleared. The calculation is not based on per-connection or
per-peer basis.ro Gauge32 .1.3.6.1.4.1.9.9.762.1.7.2.1 |
cwoDrePerfStatsEncodeCompressionLatencyThis object indicates the processing latency that is introduced
by DRE/LZ/PLZ processes during the encoding of data that is
coming into the DRE module.
The encoding process comprises of dividing the input data into
chunks and calculating the signature of every chunk. This
encoding process would add certain latency. Then the LZ
compression would add further latency. This object indicates
the value that is calculated since the last time the counter was
cleared. The calculation is not based on per-connection or
per-peer basis.ro Unsigned32 UNITS "ms" .1.3.6.1.4.1.9.9.762.1.7.2.2 |
cwoDrePerfStatsEncodeAvgMsgSizeThis object indicates the average size of all the messages
handled by DRE during encoding (i.e., for all the messages
received from the LAN side). The message size is an important
factor in performance of DRE. This object indicates the value
that is calculated since the last time the counter was cleared.
The calculation is not based on per-connection or per-peer
basis.ro Unsigned32 UNITS "bytes" .1.3.6.1.4.1.9.9.762.1.7.2.3 |
cwoDrePerfStatsDecodeCompressionRatioThis object indicates the total compression ratio provided by
all the DRE components - DRE, LZ and PLZ (if applicable),
during the decoding process. It is the ratio of the number of
bytes entering the DRE module (from WAN side) and the number of
bytes exiting the DRE module (from LAN side). This object
indicates the value that is calculated since the last time the
counter was cleared. The calculation is not based on
per-connection or per-peer basis.ro Gauge32 .1.3.6.1.4.1.9.9.762.1.7.2.4 |
cwoDrePerfStatsDecodeCompressionLatencyThis object indicates the processing latency that is introduced
by DRE/LZ/PLZ processes during the decoding of data that is
coming into the DRE module.
The LZ decompression (for applicable data) would add certain
latency. Then the decoding process that involves a lot of
signature look-up for disk IO and data fetch from the data unit
for recreation of original data, would add further latency.
This object indicates the value that is calculated since the
last
time the counter was cleared. The calculation is not based on
per-connection or per-peer basis.ro Unsigned32 UNITS "ms" .1.3.6.1.4.1.9.9.762.1.7.2.5 |
cwoDrePerfStatsDecodeAvgMsgSizeThis object indicates the average size of all the messages
handled by DRE during decoding (i.e., for all the messages
received from the WAN side). The message size is an important
factor in performance of DRE. This object indicates the value
that is calculated since the last time the counter was cleared.
The calculation is not based on per-connection or per-peer
basis.ro Unsigned32 UNITS "bytes" .1.3.6.1.4.1.9.9.762.1.7.2.6 |
ciscoWanOptimizationMIBConform OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.762.3 |
ciscoWanOptimizationMIBCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.762.3.1 |
ciscoWanOptimizationMIBGroups OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.762.3.2 |