CISCO-VOICE-TONE-CADENCE-MIB
AI MIB Summary
The CISCO-VOICE-TONE-CADENCE-MIB manages programmable call-progress tone parameters—including frequency, amplitude, cadence, and duration—on Cisco voice gateways and routers to ensure compliance with ITU-T E.180 Supplement 2 regulations for specific country dialing plans.
The MIB defines the attributes of the programmable tones specified in ITU-T E.180 Supplement 2.
Each country has its own regulation to the generation and detection of the call progressing tones such as dial tone, busy tone, ring back tone. The tone attributes are programmable, for example frequency, amplitude, cadence and duration of the tone.
Main OID:
ciscoVoiceToneCadenceMIB.1.3.6.1.4.1.9.9.356
29
Objects
Active
Status
7
Dependencies
Imported Objects
Objects
29 total| Object Name |
|---|
ciscoVoiceToneCadenceMIBThe MIB defines the attributes of the programmable
tones specified in ITU-T E.180 Supplement 2.
Each country has its own regulation to the generation
and detection of the call progressing
tones such as dial tone, busy tone, ring back tone.
The tone attributes are programmable, for example
frequency, amplitude, cadence and duration of the
tone. MODULE-IDENTITY .1.3.6.1.4.1.9.9.356 |
ciscoVoiceToneCadenceMIBNotifs OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.356.0 |
ciscoVoiceToneCadenceMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.356.1 |
cVoiceToneCadenceConfig OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.356.1.1 |
cvtcTonePlanTableThis table contains the configuration of tone plans
for the programmable tones in different countries. SEQUENCE OF CvtcTonePlanEntry .1.3.6.1.4.1.9.9.356.1.1.1 |
cvtcTonePlanEntryAn entry represents one tone plan which defines attributes
of the programmable tones for a country.
Each country can have more than one tone plans with
different version. Each entry should have the unique
combination of cvtcTonePlanCountry and cvtcTonePlanVersion.
There are some system built-in tone plans. The built-in
tone plans will be populated by the system automatically
at the system start-up. They can not be created, deleted or
modified by user.
When an entry is created, the following objects must be
provided:
cvtcTonePlanCountry,
cvtcTonePlanVersion,
cvtcTonePlanFileName
When an entry is active, it can not be modified.
A system built-in tone plan can not be deleted. Only the
entries added by user can be deleted. CvtcTonePlanEntry .1.3.6.1.4.1.9.9.356.1.1.1.1 |
cvtcTonePlanIdThis object uniquely identifies the tone plan in the table. CVoiceTonePlanIndex (CISCO-MEDIA-GATEWAY-MIB) .1.3.6.1.4.1.9.9.356.1.1.1.1.1 |
cvtcTonePlanVifCountThis object indicates the number of voice interfaces are
using the tone plan.ro Gauge32 .1.3.6.1.4.1.9.9.356.1.1.1.1.2 |
cvtcTonePlanCountryThis object specifies the country code (defined in ISO-3166)
of the country that the tone plan is used for.
The country specified by the country code should be registered
in ITU E.180 Supplement 2.
Any other entry in this table may have the identical
country code, but the combination of cvtcTonePlanCountry and
cvtcTonePlanVersion must be unique.rw CountryCode (CISCO-TC) .1.3.6.1.4.1.9.9.356.1.1.1.1.3 |
cvtcTonePlanVersionThis object specifies the version of the tone plan for
a country. One country may have many tone plans,
therefore they may have the same country name, but the
combination of cvtcTonePlanCountry and cvtcTonePlanVersion
must be unique.rw Unsigned32 .1.3.6.1.4.1.9.9.356.1.1.1.1.4 |
cvtcTonePlanFileNameThis object specifies the valid file name stored on
the media gateway's harddisk.
The tone plan file can be transferred to the media gateway
via FTP text file transfer mechanism.
When creating a conceptual row, the tone plan file must
be transferred to the media gateway already.
If the entry is a built-in tone plan predefined in system,
then this object will have the value of 'BUILT-IN'.
Other provision-able tone plan files are not allowed to have
the string 'BUILT-IN' as their names.rw SnmpAdminString .1.3.6.1.4.1.9.9.356.1.1.1.1.5 |
cvtcTonePlanStorageTypeThis object specifies the storage type for this conceptual
row. If this conceptual row represents a system built-in
tone plan, the value of this object is readOnly (5).
If this conceptual row represents an user defined tone
plan, the value of this object is nonVolatile (3).
The built-in tone plans will be added by the system
automatically at the system start-up. They can not be
added, deleted or modified by user.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.9.9.356.1.1.1.1.6 |
cvtcTonePlanRowStatusThe entries for The system built-in tone plans will be
added by the system at start-up, they can not be added,
modified or deleted by user.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.9.9.356.1.1.1.1.7 |
cvtcToneIdTableThis table contains the identification of the
programmable tones. SEQUENCE OF CvtcToneIdEntry .1.3.6.1.4.1.9.9.356.1.1.2 |
cvtcToneIdEntryAn entry represents the identification for
one programmable tone in a tone plan. CvtcToneIdEntry .1.3.6.1.4.1.9.9.356.1.1.2.1 |
cvtcToneIdThis object uniquely identifies the programmable tone in
a tone plan. Unsigned32 .1.3.6.1.4.1.9.9.356.1.1.2.1.1 |
cvtcToneNameThis object specified the name of the programmable tone.rw SnmpAdminString .1.3.6.1.4.1.9.9.356.1.1.2.1.2 |
cvtcToneIdRowStatusThe entries for ITU defined tones will be added by the
system at start-up.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.9.9.356.1.1.2.1.3 |
cvtcProgrammableToneTableThis table contains the configurable attributes
of the programmable tones for tone plan. SEQUENCE OF CvtcProgrammableToneEntry .1.3.6.1.4.1.9.9.356.1.1.3 |
cvtcProgrammableToneEntryAn entry represents the configurable attributes for
one programmable tone in a tone plan.
The tone attributes are specified in ITU E.180
Supplement 2. CvtcProgrammableToneEntry .1.3.6.1.4.1.9.9.356.1.1.3.1 |
cvtcProgrammableToneFrequencyThis object specified the frequency of the tone
to be played or detected.rw CToneFrequency .1.3.6.1.4.1.9.9.356.1.1.3.1.1 |
cvtcProgrammableToneAmplitudeThis object specified the amplitude expression of the tone
to be played or detected.rw CToneAmplitude .1.3.6.1.4.1.9.9.356.1.1.3.1.2 |
cvtcProgrammableToneCadenceThis object specified the cadence of the tone
to be played or detected.rw CToneCadence .1.3.6.1.4.1.9.9.356.1.1.3.1.3 |
cvtcProgrammableToneDurationThis object specified the duration of the tone
will be played.
The value of 0 indicates that the tone will be played
infinitely unless interrupted.rw Unsigned32 .1.3.6.1.4.1.9.9.356.1.1.3.1.4 |
cvtcProgrammableToneStorageTypeThis object specifies the storage type for this
conceptual row. If this conceptual row represents
a programmable tone in a system built-in tone plan,
the value of this object is permanent (4).
If this conceptual row represents a programmable tone
in an user defined tone plan, the value of this object
is nonVolatile (3).
If the value of this object is permanent (4),
cvtcProgrammableToneDuration is the only object can be
modified by the user.rw StorageType (SNMPv2-TC) .1.3.6.1.4.1.9.9.356.1.1.3.1.5 |
cvtcProgrammableToneRowStatusThis object is used to add, delete or modify the entry
of the table.
When an entry is created, the following objects have to
be provided:
cvtcProgrammableToneFrequency,
cvtcProgrammableToneAmplitude,
cvtcProgrammableToneCadence.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.9.9.356.1.1.3.1.6 |
ciscoVoiceToneCadenceMIBConform OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.356.3 |
cVoiceToneCadenceCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.356.3.1 |
cVoiceToneCadenceGroups OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.356.3.2 |