CISCO-VOICE-LMR-MIB
The CISCO-VOICE-LMR-MIB manages Cisco IOS DSP resources to inject configurable tone sequences (tone, pause, guard, and idle) for Land Mobile Radio channel wake-up and activation. It also controls digital filtering on the DSP to suppress specific 1950Hz or 2175Hz guard tones generated by the radio hardware during voice transmission.
Imported Objects
Objects
22 total| Object Name |
|---|
ciscoVoiceLmrMIBThis MIB module provides management of voice tone
signal as static injected tone for Land Mobile Radio
The tone signal includes tone, pause, guard/idle tone.
User can configure a sequence of tone and pause to
be played out before any voice sample is played out.
These tones are used to wake up the radio and
select the radio channel. During the voice playout,
a configured guard tone will be mixed with the voice
to keep the radio active. For some radio systems,
there is no need for the guard tone, but a configured
idle tone is needed to inform the radio that the
channel is idle. It is possible that the radio system
will generate guard/idle tone. In that case,
the IOS can instruct the DSP to filter out the radio
generated guard/idle tone by enabling digital filter.
Digital filter is able to filter out either 1950HZ or
2175HZ tone. MODULE-IDENTITY .1.3.6.1.4.1.9.9.510 |
cvlMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.510.1 |
cvlToneObjects OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.510.1.1 |
cvlClassTableThe table contains the LMR guard/idle tone frequency
and amplitude. It also specifies what frequency will be
filtered out from radio voice input by dsp digital filter. SEQUENCE OF CvlClassEntry .1.3.6.1.4.1.9.9.510.1.1.1 |
cvlClassEntryA concept row in cvlClassTable. It has class name,
tone frequency, tone amplitude, guard/idle tone
indicator and digital filter information. CvlClassEntry .1.3.6.1.4.1.9.9.510.1.1.1.1 |
cvlClassIndexAn arbitrary integer which increases monotonically to
index the cvlClassTable. Unsigned32 .1.3.6.1.4.1.9.9.510.1.1.1.1.1 |
cvlClassNameThe object reflects the voice class name.ro SnmpAdminString .1.3.6.1.4.1.9.9.510.1.1.1.1.2 |
cvlDigitalFilterThis object reflects which tone frequency should
be filtered out from radio input.ro Enumeration .1.3.6.1.4.1.9.9.510.1.1.1.1.3 |
cvlGuardToneFreqThis object reflects the guard/idle tone frequency between
1-4000 HZ. If there is no guard/idle tone configured for
this voice class, cvlGuardToneFreq has value 0.ro VoiceFrequency .1.3.6.1.4.1.9.9.510.1.1.1.1.4 |
cvlGuardToneAmpThis object reflects the guard/idle tone amplitude in dbm.ro VoiceAmplitude .1.3.6.1.4.1.9.9.510.1.1.1.1.5 |
cvlIdleToneFlagThis object reflects this voice class has guard/idle
tone configured. true means guard tone and false means
idle tone.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.510.1.1.1.1.6 |
cvlSignalToneTableThe table contains the LMR injected tone information
and playout sequence for voice class tone signal.
The tones with same cvlSignalToneGroupIndex
will be played out in ascending order of the
cvlSignalToneIndex. SEQUENCE OF CvlSignalToneEntry .1.3.6.1.4.1.9.9.510.1.1.2 |
cvlSignalToneEntryAn entry in the table, containing information
about a single tone. CvlSignalToneEntry .1.3.6.1.4.1.9.9.510.1.1.2.1 |
cvlSignalToneGroupIndexThis object reflects a group of tones.
The tones with same cvlSignalToneGroupIndex
will be played out in ascending order of the
cvlSignalToneIndex. Unsigned32 .1.3.6.1.4.1.9.9.510.1.1.2.1.1 |
cvlSignalToneIndexThis object reflects the tone playout sequence in
ascending order of the index for the tones with same
cvlSignalToneGroupIndex value. Unsigned32 .1.3.6.1.4.1.9.9.510.1.1.2.1.2 |
cvlSignalToneNameThe object reflects the tone signal class name.ro SnmpAdminString .1.3.6.1.4.1.9.9.510.1.1.2.1.3 |
cvlSignalToneFreqThis object reflects the tone frequency in HZ.
If the value is 0 then no tone will be played out
and can be used to provide pause during a sequence
of tones.ro VoiceFrequency .1.3.6.1.4.1.9.9.510.1.1.2.1.4 |
cvlSignalToneAmpThis object reflects the signal tone amplitude in dbm.ro VoiceAmplitude .1.3.6.1.4.1.9.9.510.1.1.2.1.5 |
cvlSignalToneDurThis object reflects the signal tone duration.ro LmrToneDuration .1.3.6.1.4.1.9.9.510.1.1.2.1.6 |
cvlMIBConformance OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.510.2 |
cvlMIBCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.510.2.1 |
cvlMIBGroups OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.510.2.2 |
More MIBs from Cisco
Browse all CiscoMIBs →The CISCO-ENTITY-VENDORTYPE-OID-MIB maps Cisco-specific hardware component identifiers to the ENTITY-MIB's entPhysicalTable, enabling precise differentiation of physical device types such as line cards, power supplies, and fans within Cisco infrastructure. This mapping ensures that SNMP management systems can accurately correlate physical inventory entries with vendor-specific component definitions for accurate device discovery and monitoring.
The CISCO-UNIFIED-COMPUTING-EQUIPMENT-MIB provides SNMP-based monitoring and management of Cisco Unified Computing System (UCS) hardware components, including chassis, blades, fabric interconnects, and power supplies. It exposes critical operational metrics such as device status, port states, temperature readings, fan speeds, and power consumption data for infrastructure health assessment.
The CISCO-UNIFIED-COMPUTING-ADAPTOR-MIB enables SNMP-based monitoring and management of physical and virtual network adapter interfaces, including link status, traffic counters, error statistics, and port configuration parameters, within the Cisco Unified Computing System (UCS) fabric interconnects and blade servers.
The CISCO-UNIFIED-COMPUTING-TC-MIB module defines standard textual conventions and data type definitions required for monitoring Cisco Unified Computing System (UCS) hardware components, including server blades, fabric interconnects, and chassis resources. These definitions enable consistent interpretation of specific UCS metrics such as power supply status, fan speeds, thermal readings, and port utilization across SNMP management applications.
The CISCO-UNIFIED-COMPUTING-FABRIC-MIB enables SNMP-based monitoring and management of the Cisco UCS Fabric Interconnects and associated fabric switching infrastructure, exposing metrics for port states, link utilization, error counters, and fabric topology status. It facilitates granular visibility into the physical and logical fabric layers, including uplink/downlink interfaces, VLAN configurations, and fabric failover conditions within the unified computing environment.
The STARENT-MIB module provides SNMP management and monitoring capabilities for Cisco ASR 5000 and ASR 5500 multimedia core platforms, specifically exposing metrics related to 2G/3G/4G and WiFi subscriber sessions, inline service states, and carrier-class high-availability status.