CISCO-VOICE-IF-MIB
AI MIB Summary
The CISCO-VOICE-IF-MIB monitors and configures operational parameters for Cisco voice analog and ISDN interfaces, tracking metrics such as interface status, line states, and signaling events to ensure the integrity of voice transport layers.
Common Voice Interface MIB module. The MIB module manages the common voice related parameters for both voice analog and ISDN interfaces.
24
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
24 total| Object Name |
|---|
ciscoVoiceInterfaceMIB OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.64 |
SNMPv2-SMI-v1 Unknown .1.3.6.1.4.1.9.9.64 |
cvIfObjects OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.64.1 |
cvIfCfgObjects OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.64.1.1 |
cvIfCfgTableThe Voice Common Configuration Table. It contains information
about the voice related configuration parameters for
both analog and digital telephony interfaces. SEQUENCE OF CvIfCfgEntry .1.3.6.1.4.1.9.9.64.1.1.1 |
cvIfCfgEntryAn entry in the configuration table for each voice analog
interface or voice feature associated ISDN signalling channel.
The entry is automatically created when a voice analog interface
hardware is found or ISDN signalling channel is configured
and the ISDN associated voice support hardware is detected
by the managed system.
For the ISDN signalling channel associated entry, the entry
is deleted after ISDN signalling channel is removed. CvIfCfgEntry .1.3.6.1.4.1.9.9.64.1.1.1.1 |
cvIfCfgNoiseRegEnableThe object indicates whether or not the background noise should
be played to fill silence gaps if VAD is activated.
The default value of this object is enabled.rw TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } .1.3.6.1.4.1.9.9.64.1.1.1.1.1 |
cvIfCfgNonLinearProcEnableThe object indicates whether or not the Nonlinear Processing
is enabled for the interface.
The default value of this object is enabled.rw TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } .1.3.6.1.4.1.9.9.64.1.1.1.1.2 |
cvIfCfgMusicOnHoldThresholdThe object specifies the Music On Hold Threshold for
the interface.
The default value of this object is -38 dBm.rw Integer32(-70..-30) -- Units -- dBm .1.3.6.1.4.1.9.9.64.1.1.1.1.3 |
cvIfCfgInGainThis object contains the amount of gain inserted at the
receiver side of the interface. The input gain settings
only define a gain/loss relative to the 0 dB setting.
The absolute loss at the 0 dB setting could be implementation
dependent based on the desired network loss plan.
The default value of this object is 0 dB (decibel).rw Integer32(-6..14) -- Units -- dB .1.3.6.1.4.1.9.9.64.1.1.1.1.4 |
cvIfCfgOutAttnThis object contains the amount of attenuation inserted at the
transmit side of the interface.
The output attenuation settings only define a loss
relative to the 0 dB setting.
The absolute loss at the 0 dB setting could be implementation
dependent based on the desired network loss plan.
The default value of this object is 0 dB (decibel).rw Integer32 .1.3.6.1.4.1.9.9.64.1.1.1.1.5 |
cvIfCfgEchoCancelEnableThe object specifies whether or not the Echo Cancellation
is enabled for the interface.
The default value of this object is enabled.rw TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } .1.3.6.1.4.1.9.9.64.1.1.1.1.6 |
cvIfCfgEchoCancelCoverageThe object specifies the Echo Canceller coverage for
the interface. This object is valid if the
cvIfCfgEchoCancelEnable object is 'true'.
echoCanceller16ms - 16 milliseconds echo canceller coverage.
echoCanceller24ms - 24 milliseconds echo canceller coverage.
echoCanceller32ms - 32 milliseconds echo canceller coverage.
The default value of this object is echoCanceller16ms.rw Enumeration .1.3.6.1.4.1.9.9.64.1.1.1.1.7 |
cvIfCfgConnectionModeThe object indicates the connection mode of the interface.
normal - the interface acts normally to handle incoming
and outgoing call.
trunk - the interface acts in trunking mode. trunking mode
causes two interfaces (on either the same or different
routers) to be always conferenced together, and for
telephony signaling to be passed transparently through
the VoIP system rather than trapped and interpreted by
the session application on the router(s).
plar - the interface acts in PLAR (private line automatic
ringdown) mode. PLAR is handled by associating a
peer directly with an interface such that when the
interface goes off-hook, that peer is used to setup
the second call leg and conference them together
without the caller having to dial any digits.rw Enumeration .1.3.6.1.4.1.9.9.64.1.1.1.1.8 |
cvIfCfgConnectionNumberThis is the E.164 phone number that is used to
establish connection with trunking mode or PLAR mode.
If the cvIfCfgConnectionMode is 'normal', then this
object will be a zero length string.rw DisplayString .1.3.6.1.4.1.9.9.64.1.1.1.1.9 |
cvIfCfgInitialDigitTimeOutThis is the initial digit timeout that indicates the amount of
time the managed system waits for an initial input digit from the
caller. The timer is activated when the call is accepted and is
deactivated upon digit input. If the timer expires, the caller
is signaled through the appropriate tone and the call is abandoned.
The value of zero disables the timer.
The default value of this object is 10 seconds.rw Integer32 .1.3.6.1.4.1.9.9.64.1.1.1.1.10 |
cvIfCfgInterDigitTimeOutThis is the inter-digit timeout that indicates the amount of time
the managed system waits for a subsequent input digit from the
caller. The timer is started upon receipt of an input digit and
restarted as each digit is received until the destination address
is identified. If the timer expires and no destination address is
identified, the caller is signaled through the appropriate tone
and the call is abandoned. The value of zero disables the timer.
The default value of this object is 10 seconds.rw Integer32 .1.3.6.1.4.1.9.9.64.1.1.1.1.11 |
cvIfCfgRegionalToneThis object contains the country specific setting
for the tone, ring, cadence parameters to be used by
this interface.rw CountryCode -- Rsyntax OCTET STRING .1.3.6.1.4.1.9.9.64.1.1.1.1.12 |
cvIfConformance OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.64.2 |
cvIfCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.64.2.1 |
cvIfCompliance OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.64.2.1.1 |
cvIfGroups OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.64.2.2 |
cvIfGroup OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.64.2.2.1 |
cvIfConnectionGroup OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.64.2.2.2 |