CISCO-VOICE-ENABLED-LINK-MIB
AI MIB Summary
The CISCO-VOICE-ENABLED-LINK-MIB monitors Voice Enabled ATM and Frame Relay links within Cisco Switched Voice Protocol environments to track PVC origin identification via default MAC address propagation. This data enables the Cisco Voice Manager Application to reconstruct and validate the active voice network topology by correlating call setup and keepalive messages across remote nodes.
This MIB module provides information about Voice Enabled ATM and Frame Relay Links used by the Cisco Switched voice protocol. The Cisco Switched voice protocol passes the default MAC address for its node to the next node in the path, in both call setup messages and keepalive requests and responses. This MAC address is stored at the remote node to identify where the incoming pvc originates. This information is then used by the Cisco Voice Manager Application to determine the voice network topology.
21
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
21 total| Object Name |
|---|
ciscoVoiceEnabledLinkMIB OBJECT IDENTIFIER .1.3.6.1.4.1.9.10.53 |
IMPORTS Unknown .1.3.6.1.4.1.9.10.53 |
cvenabledlinkMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.9.10.53.1 |
cvEnabledLink OBJECT IDENTIFIER .1.3.6.1.4.1.9.10.53.1.1 |
cvEnabledDefaultMacAddrThis item defines the Default MAC Address used by this
node in call set up messages, keepalive requests and
responses.ro MacAddress -- Rsyntax OCTET STRING .1.3.6.1.4.1.9.10.53.1.1.1 |
cvEnabledLinkTableThis table contains information about ATM and Frame
Relay Links used by voice over ATM and voice over Frame
Relay calls. SEQUENCE OF CvEnabledLinkEntry .1.3.6.1.4.1.9.10.53.1.1.2 |
cvEnabledLinkEntryThe information regarding a single ATM or Frame Relay
Link. An entry of this table is created when its
associated pvc is enabled for carrying Cisco Switched
voice traffic. The entry is deleted when its associated
pvc is no longer enabled for Cisco Switched voice
traffic. CvEnabledLinkEntry .1.3.6.1.4.1.9.10.53.1.1.2.1 |
cvEnabledLinkIndexA monotonically increasing number, starting from zero,
that is assigned to each link that is currently
configured to carry Cisco Switched voice traffic. If a
link is later unconfigured for voice traffic, the
number assigned to it will not be reused. When the
maximum value is reached, the value will wrap to zero
and use a currently unassigned value.ro INTEGER .1.3.6.1.4.1.9.10.53.1.1.2.1.1 |
cvEnabledLinkTypeThe object defines the type of link, either ATM or
Frame Relay.ro Enumeration .1.3.6.1.4.1.9.10.53.1.1.2.1.2 |
cvEnabledLinkInterfaceNameThe object specifies the iFName of the peer interface
that is used for the voice over ATM/FR call. A zero
length string indicates that the value is unavailable.ro DisplayString -- Rsyntax OCTET STRING .1.3.6.1.4.1.9.10.53.1.1.2.1.3 |
cvEnabledLinkVpiDlciThe VPI or DLCI used for this ATM/Frame Relay
connection.ro INTEGER .1.3.6.1.4.1.9.10.53.1.1.2.1.4 |
cvEnabledLinkVciThe VCI used, if it is an ATM connection.ro INTEGER .1.3.6.1.4.1.9.10.53.1.1.2.1.5 |
cvEnabledLinkRemoteMacAddrThe default MAC address of the node at the other end of
the link.ro MacAddress -- Rsyntax OCTET STRING .1.3.6.1.4.1.9.10.53.1.1.2.1.6 |
ciscoVoiceEnabledLinkMIBNotificationPrefix OBJECT IDENTIFIER .1.3.6.1.4.1.9.10.53.2 |
ciscoVoiceEnabledLinkMIBNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.9.10.53.2.0 |
ciscoVoiceEnabledlinkMIBConformance OBJECT IDENTIFIER .1.3.6.1.4.1.9.10.53.3 |
ciscoVoiceEnabledlinkMIBCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.9.10.53.3.1 |
ciscoVoiceEnabledlinkMIBCompliance OBJECT IDENTIFIER .1.3.6.1.4.1.9.10.53.3.1.1 |
ciscoVoiceEnabledlinkMIBGroups OBJECT IDENTIFIER .1.3.6.1.4.1.9.10.53.3.2 |
cvEnabledMacAddrGroup OBJECT IDENTIFIER .1.3.6.1.4.1.9.10.53.3.2.1 |
cvEnabledLinkGroup OBJECT IDENTIFIER .1.3.6.1.4.1.9.10.53.3.2.2 |