Home/Catalog/CISCO-VOICE-CARD-MIB

CISCO-VOICE-CARD-MIB

AI MIB Summary

The CISCO-VOICE-CARD-MIB manages voice-card specific parameters, including codec complexity settings, on Cisco voice-enabled routers. This module enables the configuration and monitoring of digital signal processing resources required for voice traffic handling on Cisco hardware.

The MIB module to configure voice-card specific parameters such as codec complexity in voice- enabled cisco routers.
Main OID:
ciscoVoiceCard.1.3.6.1.4.1.9.9.300576
12
Objects
Active
Status
3
Dependencies

Imported Objects

Objects

12 total
Object Name
ciscoVoiceCardThe MIB module to configure voice-card specific parameters such as codec complexity in voice- enabled cisco routers.
MODULE-IDENTITY
.1.3.6.1.4.1.9.9.300576
ciscoVoiceCardNotifications
OBJECT IDENTIFIER
.1.3.6.1.4.1.9.9.300576.0
ciscoVoiceCardObjects
OBJECT IDENTIFIER
.1.3.6.1.4.1.9.9.300576.1
cVoiceCardTableA list of voice card entries. The number of entries is the number of slots in the router.
SEQUENCE OF CVoiceCardEntry
.1.3.6.1.4.1.9.9.300576.1.1
cVoiceCardEntryAn entry containing management information applicable to a particular voice card. The number of entries is the same as the number of slots in the router. This is a constant for a given router.
CVoiceCardEntry
.1.3.6.1.4.1.9.9.300576.1.1.1
cVoiceCardIndexA unique value, greater than zero, used to index the cVoiceCardTable.
Unsigned32
.1.3.6.1.4.1.9.9.300576.1.1.1.1
cVoiceCardSlotNumberThe slot number of the slot containing this voice card.ro
Unsigned32
.1.3.6.1.4.1.9.9.300576.1.1.1.2
cVoiceCardCodecComplexityDetermines whether the voice ports in the card can support all codecs or not. Medium complexity configuration can not support all codecs, while High Complexity configuration supports all codecs. The card may support all types of codecs listed, but the NMS setting a value will force the card only to use the codecs limited by the Codec Complexity configured.rw
Enumeration
.1.3.6.1.4.1.9.9.300576.1.1.1.3
cVoiceCardAdminStatusAdministrative status of the voice card. The voice card is administratively down if all voice ports are shut. The agent changes the status whenever the status of the voice card changes in the router. The voice card changes state immediately when the NMS changes the state of this object.rw
Enumeration
.1.3.6.1.4.1.9.9.300576.1.1.1.4
ciscoVoiceCardConformance
OBJECT IDENTIFIER
.1.3.6.1.4.1.9.9.300576.2
ciscoVoiceCardMIBCompliances
OBJECT IDENTIFIER
.1.3.6.1.4.1.9.9.300576.2.1
ciscoVoiceCardMIBGroups
OBJECT IDENTIFIER
.1.3.6.1.4.1.9.9.300576.2.2
CISCO-VOICE-CARD-MIB - SNMP MIB Reference | MIBs Explorer