CISCO-USP-MIB
AI MIB Summary
The CISCO-USP-MIB monitors the Cisco Unified SIP Proxy (CUSP) service to track call volume metrics (Calls Per Second, Total, Failed, and Dropped Calls), server group status, and system resources including CPU, memory, and license utilization. It facilitates fault detection through traps for threshold violations, process failures, backup events, and connection anomalies within the centralized SIP architecture.
The MIB Module for the management of the Cisco Unified SIP Proxy (CUSP) service. CUSP is a Session Initiation Protocol (SIP) proxy server that helps enterprises aggregate their SIP elements into a centralized architecture in order to simplify and improve the flexibility of their network.
MIB has OID's to monitor CUSP specific info like Server Group, Calls Per Second (CPS), Total Calls, Failed Calls, Dropped Calls, License, Up time CPU and Memory info and also traps on Server group elements, CPU and Memory threshold exceed, License exceed, Back up , process going down, Extensive logging and connection.
Main OID:
ciscoUspMIB.1.3.6.1.4.1.9.9.827
78
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
78 total| Object Name |
|---|
ciscoUspMIBThe MIB Module for the management of the Cisco Unified
SIP Proxy (CUSP) service. CUSP is a Session Initiation Protocol
(SIP) proxy server that helps enterprises aggregate their SIP
elements into a centralized architecture in order to simplify
and improve the flexibility of their network.
MIB has OID's to monitor CUSP specific info like Server
Group, Calls Per Second (CPS), Total Calls, Failed Calls,
Dropped Calls, License, Up time CPU and Memory info and also
traps on Server group elements, CPU and Memory threshold exceed,
License exceed, Back up , process going down, Extensive logging
and connection. MODULE-IDENTITY .1.3.6.1.4.1.9.9.827 |
ciscoUspMIBNotifs OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.827.0 |
cuspSystemStateAlertThis notification is generated when the CUSP system goes
up/down. This notification can be enabled/disabled by setting
cuspSystemStateAlertEnable. NOTIFICATION-TYPE .1.3.6.1.4.1.9.9.827.0.1 |
cuspServerGroupElementAlertThis notification is generated when server group element status
changes. This notification can be enabled/disabled by setting
cuspServerGroupElementAlertEnable. NOTIFICATION-TYPE .1.3.6.1.4.1.9.9.827.0.2 |
cuspServerGroupAlertThis notification is generated when all the elements in the
server group goes down or when any one element in the server
group comes up after all the elements in the group were down.
This notification can be enabled/disabled by setting
cuspServerGroupAlertEnable. NOTIFICATION-TYPE .1.3.6.1.4.1.9.9.827.0.3 |
cuspMemoryThresholdAlertThis notification is generated when CUSP memory usage
exceeds the cuspMemoryThresholdValue. This notification can be
enabled/disabled by setting cuspMemoryThresholdAlertEnable. NOTIFICATION-TYPE .1.3.6.1.4.1.9.9.827.0.4 |
cuspLicenseExceededAlertThis notification is generated when average CPS exceeds
cuspLicenseLimit. This notification can be enabled/disabled by
setting cuspLicenseExceededAlertEnable. NOTIFICATION-TYPE .1.3.6.1.4.1.9.9.827.0.5 |
cuspLicenseStateAlertThis notification is generated when CUSP license state changes.
This notification can be enabled/disabled by setting
cuspLicenseStateAlertEnable. NOTIFICATION-TYPE .1.3.6.1.4.1.9.9.827.0.6 |
cuspExtensiveLoggingAlertThis notification is generated when extensive debug level
logging is enabled in CUSP. Extensive logging might impact the
performance and system stability. This notification can be
enabled/disabled by setting cuspExtensiveLoggingAlertEnable. NOTIFICATION-TYPE .1.3.6.1.4.1.9.9.827.0.7 |
cuspDiskSpaceThresholdAlertThis notification is generated when the CUSP Disk usage exceeds
the cuspDiskSpaceThresholdValue. This notification can be
enabled/disabled by setting cuspDiskSpaceThresholdAlertEnable. NOTIFICATION-TYPE .1.3.6.1.4.1.9.9.827.0.8 |
cuspBackupProcessFailAlertThis notification is generated when back up process fails. This
notification can be enabled/disabled by setting
cuspBackupProcessFailAlertEnable. NOTIFICATION-TYPE .1.3.6.1.4.1.9.9.827.0.9 |
cuspConnectionExceptionAlertThis notification is generated when a connection exception
occurs. This notification can be enabled/disabled by setting
cuspConnectionExceptionAlertEnable. NOTIFICATION-TYPE .1.3.6.1.4.1.9.9.827.0.10 |
ciscoUspMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.827.1 |
cuspScalar OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.827.1.1 |
cuspLastCounterResetTimeThis object gives the time stamp in date and time when the call
counter was last reset. All counters related to calls, CPS and
messages would be reset when counter is reset.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.9.9.827.1.1.1 |
cuspSystemStateThis object gives the CUSP system state.
'up' - System is up.
'down' - System is either offline or going down.ro Enumeration .1.3.6.1.4.1.9.9.827.1.1.2 |
cuspSystemUpTimeThis object gives the CUSP system up time information.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.9.9.827.1.1.3 |
cuspLicenseLimitThis object gives the maximum licensed CPS limit value.
Calls will be rejected if the license limit is exceeded.ro Unsigned32 .1.3.6.1.4.1.9.9.827.1.1.4 |
cuspLicenseStateThis object gives the current license state of the CUSP.
'waiting' - The initial state after an entitlement request
while waiting for the authorization request response.
'overage' - The entitlement is in overage.
'outofcompliance' - Requested entitlement is more than the
available count. All calls will be rejected.
'notapplicable' - Enforcement mode is not applicable.
'invalidtag' - The entitlement tag is invalid.
'invalid' - Error condition state.
'init' - The initial state after the instance is created but
before the entitlement is requested with.
'incompliance' - License registration and entitlement
succeeded.
'evalexpired' - Evaluation period has expired.
'eval' - CUSP is using the evaluation period for this
entitlement.
'disabled' - Smart Licensing has been deactivated or disabled.
'authorizedperiodexpired' - The authorized period has expired.ro Enumeration .1.3.6.1.4.1.9.9.827.1.1.5 |
cuspSmartAgentStateThis object gives the current license state of the Smart
License Agent.
'unconfigured' - Smart licensing agent is not enabled and
and all calls will be rejected in this state.
'unidentified' - Smart licensing is enabled and entitlement
information is sent to the agent. Calls will be allowed in this
state.
'evalexpired' - Smart agent will move to this state when
evaluation period expires. All calls will be rejected in this
state.
'transient' - Smart agent is in transient state.
'registered' - CUSP registered with the cloud server but
license not yet authorized.
'outofcompliance' - Requested entitlement is more than the
available count. All calls will be rejected.
'authorized' - License registration and entitlement succeeded.
'authorizationexpiry' - Renew request failed for more than 90
days. All calls will be rejected.ro Enumeration .1.3.6.1.4.1.9.9.827.1.1.6 |
cuspConfiguredMemoryThis object gives the total memory (RAM) in MB(MegaByte)
configured on CUSP.ro Unsigned32 UNITS "MegaByte" .1.3.6.1.4.1.9.9.827.1.1.7 |
cuspMemoryUsedThis object gives the CUSP current memory (RAM) usage
information in MB (MegaByte).ro Unsigned32 UNITS "MegaByte" .1.3.6.1.4.1.9.9.827.1.1.8 |
cuspDiskSpaceUsedThis object gives the current disk utilization of CUSP in MB
(Mega Byte).ro Integer32 .1.3.6.1.4.1.9.9.827.1.1.9 |
cuspCallStats OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.827.1.1.10 |
cuspTotalCallsThis object gives the total number of calls since the last
counter reset.ro Counter32 .1.3.6.1.4.1.9.9.827.1.1.10.1 |
cuspTotalFailedCallsThis object gives the total number of failed calls since last
counter reset.ro Counter32 .1.3.6.1.4.1.9.9.827.1.1.10.2 |
cuspCPSThis object gives the current running Calls Per Second (CPS)
information.ro Unsigned32 UNITS "CPS" .1.3.6.1.4.1.9.9.827.1.1.10.3 |
cuspAvgCPSOneMinThis object gives the average CPS (Calls Per Second) in the
last one minute.ro Unsigned32 UNITS "CPS" .1.3.6.1.4.1.9.9.827.1.1.10.4 |
cuspMaxCPSOneMinThis object gives the Maximum value of CPS (Calls Per Second)
in the last one minute.ro Unsigned32 UNITS "CPS" .1.3.6.1.4.1.9.9.827.1.1.10.5 |
cuspDroppedCallsOneSecThis object gives the count on number of calls dropped in the
last one second.ro Unsigned32 .1.3.6.1.4.1.9.9.827.1.1.10.6 |
cuspAvgDroppedCPSOneMinThis object gives the average of 'dropped calls per second' in
the last one minute.ro Unsigned32 .1.3.6.1.4.1.9.9.827.1.1.10.7 |
cuspMaxDroppedCPSOneMinThis object gives the Maximum of 'dropped calls per second' in
the last one minute.ro Unsigned32 .1.3.6.1.4.1.9.9.827.1.1.10.8 |
cuspCallsRoutedOneSecThis object gives the number of calls routed through CUSP in
last one second.ro Unsigned32 .1.3.6.1.4.1.9.9.827.1.1.10.9 |
cuspAvgCallsRoutedOneMinThis object gives the average of 'calls routed per second' in
last one minute.ro Unsigned32 .1.3.6.1.4.1.9.9.827.1.1.10.10 |
cuspMaxCallsRoutedOneMinThis object gives the maximum of 'calls routed per second' in
the last one minute.ro Unsigned32 .1.3.6.1.4.1.9.9.827.1.1.10.11 |
cuspCallsDroppedExceedingLicenseThis object gives the total calls dropped due to exceeding
license limit.ro Unsigned32 UNITS "CPS" .1.3.6.1.4.1.9.9.827.1.1.10.12 |
cuspMessageStats OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.827.1.1.11 |
cuspStrayMessageCountThis object gives the number of stray messages information.
Stray messages are messages for which CUSP doesn't have a
transaction.ro Unsigned32 UNITS "Messages" .1.3.6.1.4.1.9.9.827.1.1.11.1 |
cuspNoOfMessagesRecievedThis object gives the total number of messages received.ro Unsigned32 .1.3.6.1.4.1.9.9.827.1.1.11.2 |
cuspThresholdValues OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.827.1.1.12 |
cuspDiskSpaceThresholdValueThe percentage threshold value configured by the user. If the
percentage disk space utilization exceeds this limit then
cuspDiskSpaceThresholdAlert notification is sent.rw Integer32 .1.3.6.1.4.1.9.9.827.1.1.12.1 |
cuspMemoryThresholdValueThe percentage threshold value configured by the user. If the
percentage memory utilization exceeds this limit then
cuspMemoryThresholdAlert notification is sent.rw Integer32 .1.3.6.1.4.1.9.9.827.1.1.12.2 |
cuspTable OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.827.1.2 |
cuspServerGroupTableA list of Server Groups. Server groups define the elements with
which the Cisco Unified SIP Proxy system interacts for each
network. SEQUENCE OF CuspServerGroupEntry .1.3.6.1.4.1.9.9.827.1.2.1 |
cuspServerGroupEntryAn entry (conceptual row) in the ServerGroup Table. CuspServerGroupEntry .1.3.6.1.4.1.9.9.827.1.2.1.1 |
cuspServerGroupIndexA unique value, greater than zero, for each server group. Unsigned32 .1.3.6.1.4.1.9.9.827.1.2.1.1.1 |
cuspServerGroupNameThis object gives the name of the server group.ro OCTET STRING .1.3.6.1.4.1.9.9.827.1.2.1.1.2 |
cuspServerGroupNetworkThis object gives the network name to which the server group
belongs.ro OCTET STRING .1.3.6.1.4.1.9.9.827.1.2.1.1.3 |
cuspServerGroupStatusThis object gives the Server group status as
up/partialdown/down.
up - All the elements in the server group are up.
partialdown - At least one element in the server group is down.
down - All the elements in the server group are down.ro Enumeration .1.3.6.1.4.1.9.9.827.1.2.1.1.4 |
cuspServerGroupPingStatusThis object gives server group ping status.
true - Ping is enabled.
false - Ping is disabled.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.827.1.2.1.1.5 |
cuspServerGroupLBTypeThis object gives the load balancing algorithm for the server
group.
global - Uses global load balance algorithm.
highestq - Uses highestq algorithm where in CUSP picks the
first available element with the higest q-value.
requesturi - Hash algorithm is on Request-URI.
callid - Hash algorithm is on Call-ID.
touri - Hash algorithm is on To URI.
weight - Uses weight-based scheme.ro Enumeration .1.3.6.1.4.1.9.9.827.1.2.1.1.6 |
cuspElementTableA list of elements in a server group table. Also gives
information on status(up/down) of the element, its Q value,
weight and transport type. SEQUENCE OF CuspElementEntry .1.3.6.1.4.1.9.9.827.1.2.2 |
cuspElementEntryAn entry (conceptual row) in the cuspElementTable. CuspElementEntry .1.3.6.1.4.1.9.9.827.1.2.2.1 |
cuspElementIndexA unique value, greater than zero, for each element. Unsigned32 .1.3.6.1.4.1.9.9.827.1.2.2.1.1 |
cuspElementNameThis object gives the Server group element ID.ro OCTET STRING .1.3.6.1.4.1.9.9.827.1.2.2.1.2 |
cuspElementStatusThis object gives the server group element status.
'up' - Server group element is up.
'down' - Server group element is down.ro Enumeration .1.3.6.1.4.1.9.9.827.1.2.2.1.3 |
cuspElementQValueThis object gives the Q value of the server group element. Q
value is a real number that specifies the priority of the server
group element with respect to others in the server group. Q
value range is 0.0 to 1.0.ro OCTET STRING .1.3.6.1.4.1.9.9.827.1.2.2.1.4 |
cuspElementWeightThis object gives the weight of the server group element.
Weight is used for load balancing between server group
elements.ro Integer32 .1.3.6.1.4.1.9.9.827.1.2.2.1.5 |
cuspElementPortThis object gives the port number of the server group
element.ro Integer32 .1.3.6.1.4.1.9.9.827.1.2.2.1.6 |
cuspElementTransportThis object gives the transport type of the server group
element. Transport type can be udp,tcp or tls.ro Enumeration .1.3.6.1.4.1.9.9.827.1.2.2.1.7 |
cuspElementTotalCallsThis object gives the total routed calls to the server group
element.ro Unsigned32 .1.3.6.1.4.1.9.9.827.1.2.2.1.8 |
cuspElementFailedCallsThis object gives the total failed calls on the server group
element.ro Unsigned32 .1.3.6.1.4.1.9.9.827.1.2.2.1.9 |
cuspNotifControlInfo OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.827.1.3 |
cuspNotifSeverityThe classification on the event severity.
'error' - Significant problem.
'warning' - Not immediately significant.
'informational' - Information only.ro Enumeration .1.3.6.1.4.1.9.9.827.1.3.1 |
cuspNotifDetailThis object gives the detailed information on error
encountered.ro OCTET STRING .1.3.6.1.4.1.9.9.827.1.3.2 |
cuspSystemStateAlertEnableThis variable controls generation of cuspSystemStateAlert.
When this is 'true', generation of Notification is enabled and
when this variable is 'false', generation of Notification is
disabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.827.1.3.3 |
cuspServerGroupAlertEnableThis variable controls the generation of
cuspServerGroupAlert.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.827.1.3.4 |
cuspServerGroupElementAlertEnableThis variable controls the generation of
cuspServerGroupElementAlertrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.827.1.3.5 |
cuspLicenseExceededAlertEnableThis variable controls the generation of
cuspLicenseExceededAlert.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.827.1.3.6 |
cuspLicenseStateAlertEnableThis variable controls the generation of
cuspLicenseStateAlert.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.827.1.3.7 |
cuspExtensiveLoggingAlertEnableThis variable controls the generation of
cuspExtensiveLoggingAlert.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.827.1.3.8 |
cuspDiskSpaceThresholdAlertEnableThis variable controls the generation of
cuspDiskSpaceThresholdAlert.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.827.1.3.9 |
cuspMemoryThresholdAlertEnableThis variable controls the generation of
cuspMemoryThresholdAlert.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.827.1.3.10 |
cuspBackupProcessFailAlertEnableThis variable controls the generation of
cuspBackupProcessFailAlert notification.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.827.1.3.11 |
cuspConnectionExceptionAlertEnableThis variable controls the generation of
cuspConnectionExceptionAlert.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.827.1.3.12 |
ciscoUspMIBConform OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.827.2 |
ciscoUspMIBCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.827.2.1 |
ciscoUspMIBGroups OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.827.2.2 |