CISCO-TELEPRESENCE-MIB
AI MIB Summary
The CISCO-TELEPRESENCE-MIB enables monitoring and management of Cisco Telepresence CODECs and their attached peripherals, including displays, cameras, speakers, microphones, and presentation devices. It provides access to operational metrics for audio/video data transmission, interface configurations, and system status across the complete telepresence infrastructure.
The MIB module defines the managed objects for a Telepresence system.
Telepresence refers to a set of technologies which allow a person to feel as if they were present, to give the appearance that they were present, or to have an effect, at a location other than their true location.
A complete Telepresence system includes one or more Telepresence CODECS and peripherals such as display, camera, speaker, microphone and presentation device.
Peripherals are attached directly to a Telepresence CODEC via an interface. Some peripherals may have more than one interface to transmit audio and/or video data and provide a configuration and/or control access.
Main OID:
ciscoTelepresenceMIB.1.3.6.1.4.1.9.9.643
93
Objects
Active
Status
7
Dependencies
Imported Objects
Objects
93 total| Object Name |
|---|
ciscoTelepresenceMIBThe MIB module defines the managed objects for a
Telepresence system.
Telepresence refers to a set of technologies which
allow a person to feel as if they were present, to give
the appearance that they were present, or to have an
effect, at a location other than their true location.
A complete Telepresence system includes one or more
Telepresence CODECS and peripherals such as display, camera,
speaker, microphone and presentation device.
Peripherals are attached directly to a Telepresence CODEC via
an interface. Some peripherals may have more than one
interface to transmit audio and/or video data and provide a
configuration and/or control access. MODULE-IDENTITY .1.3.6.1.4.1.9.9.643 |
ciscoTelepresenceMIBNotifs OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.643.0 |
ctpPeripheralErrorNotificationThis notification is sent when a peripheral error is detected.
This notification is deprecated in favor of
ctpPeriStatusChangeNotification.
ctpPeripheralErrorNotification object is superseded by
ctpPeriStatusChangeNotification. NOTIFICATION-TYPE .1.3.6.1.4.1.9.9.643.0.1 |
ctpSysUserAuthFailNotificationThis notification is sent when a user authentication failure
via a Telepresence supported access protocol is
detected. NOTIFICATION-TYPE .1.3.6.1.4.1.9.9.643.0.2 |
ctpPeriStatusChangeNotificationThis notification is sent when a peripheral status is changed. NOTIFICATION-TYPE .1.3.6.1.4.1.9.9.643.0.3 |
ciscoTelepresenceMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.643.1 |
ctpObjects OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.643.1.1 |
ctpPeripheralErrorNotifyEnableThis object controls generation of
ctpPeripheralErrorNotification.
When the object is 'true(1)', generation of
ctpPeripheralErrorNotification is enabled.
When the object is 'false(2)', generation of
ctpPeripheralErrorNotification is disabled.
ctpPeripheralErrorNotifyEnable object is superseded by
ctpPeriStatusChangeNotifyEnable.rwdeprecated TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.643.1.1.1 |
ctpSysUserAuthFailNotifyEnableThis object controls generation of
ctpSysUserAuthFailNotification.
When the object is 'true(1)', generation of
ctpSysUserAuthFailNotification is enabled.
When the object is 'false(2)', generation of
ctpSysUserAuthFailNotification is disabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.643.1.1.2 |
ctpSystemResetThis object is used to reset or restart a Telepresence system.rw CtpSystemResetMode .1.3.6.1.4.1.9.9.643.1.1.3 |
ctpPeriStatusChangeNotifyEnableThis object controls generation of
ctpPeriStatusChangeNotification.
When the object is 'true(1)', generation of
ctpPeriStatusChangeNotification is enabled.
When the object is 'false(2)', generation of
ctpPeriStatusChangeNotification is disabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.643.1.1.4 |
ctpVlanIdThis object specifies the Telepresence system VLAN ID.rw Unsigned32 .1.3.6.1.4.1.9.9.643.1.1.5 |
ctpDefaultGatewayAddrTypeThis object specifies the type of address contained
in the corresponding instance of ctpDefaultGateway.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.9.9.643.1.1.6 |
ctpDefaultGatewayThis object specifies the Telepresence system default gateway.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.9.9.643.1.1.7 |
ctpPeripheralStatusObjects OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.643.1.2 |
ctpPeripheralStatusTableThe table contains system peripheral information.
An entry in this table has a corresponding entry,
INDEX-ed by the same value of ctpPeripheralIndex,
in the table relevant to the type of interface:
ctpEtherPeripheralStatusTable for Ethernet,
ctpHDMIPeripheralStatusTable for HDMI or
ctpDVIPeripheralStatusTable for DVI. SEQUENCE OF CtpPeripheralStatusEntry .1.3.6.1.4.1.9.9.643.1.2.1 |
ctpPeripheralStatusEntryAn entry contains information about one peripheral which is
configured or detected by a Telepresence system. CtpPeripheralStatusEntry .1.3.6.1.4.1.9.9.643.1.2.1.1 |
ctpPeripheralIndexThis object specifies a unique index for a peripheral
which is attached to a Telepresence system. Unsigned32 .1.3.6.1.4.1.9.9.643.1.2.1.1.1 |
ctpPeripheralDescriptionThis object specifies a description of the attached peripheral.
Peripheral description may be the peripheral type, model and/or
version information or a peripheral signal description.ro SnmpAdminString .1.3.6.1.4.1.9.9.643.1.2.1.1.2 |
ctpPeripheralStatusThis object specifies a peripheral status.ro CtpPeripheralStatusCode .1.3.6.1.4.1.9.9.643.1.2.1.1.3 |
ctpPeripheralDeviceCategoryThis object specifies a peripheral category of a device.ro CtpPeripheralDeviceCategoryCode .1.3.6.1.4.1.9.9.643.1.2.1.1.4 |
ctpPeripheralDeviceNumberThis object specifies a device number for a peripheral.
Device number is unique within the same peripheral device
category.ro Unsigned32 .1.3.6.1.4.1.9.9.643.1.2.1.1.5 |
ctpEtherPeripheralStatusTableThe table contains information about all peripherals
connected to the system via Ethernet port. SEQUENCE OF CtpEtherPeripheralStatusEntry .1.3.6.1.4.1.9.9.643.1.2.2 |
ctpEtherPeripheralStatusEntryAn entry contains information about one peripheral
attached to the Telepresence system via Ethernet. CtpEtherPeripheralStatusEntry .1.3.6.1.4.1.9.9.643.1.2.2.1 |
ctpEtherPeripheralIndexThis object specifies a unique number for a peripheral
Ethernet interface.
If no peripheral has more than one Ethernet interface, this
object will have value '1'. Unsigned32 .1.3.6.1.4.1.9.9.643.1.2.2.1.1 |
ctpEtherPeripheralIfIndexThe object specifies an index value that uniquely identifies
the interface to which this entry is applicable. The
interface identified by a particular value of this index is
the same interface as identified by the same value of the
IF-MIB's ifIndex.
If this entry doesn't have corresponding ifIndex, then this
value will have value '0'.ro InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.9.9.643.1.2.2.1.2 |
ctpEtherPeripheralAddrTypeThis object specifies the type of address contained
in the corresponding instance of ctpEtherPeripheralAddr.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.9.9.643.1.2.2.1.3 |
ctpEtherPeripheralAddrThis object specifies the address of the attached peripheral
in the format given by the corresponding instance of
ctpEtherPeripheralAddrType.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.9.9.643.1.2.2.1.4 |
ctpEtherPeripheralStatusThis object specifies attached peripheral status retrieved via
Ethernet port.ro CtpPeripheralStatusCode .1.3.6.1.4.1.9.9.643.1.2.2.1.5 |
ctpHDMIPeripheralStatusTableThe table contains information about all peripherals
connected to the system via HDMI. SEQUENCE OF CtpHDMIPeripheralStatusEntry .1.3.6.1.4.1.9.9.643.1.2.3 |
ctpHDMIPeripheralStatusEntryAn entry contains information about one Telepresence
HDMI peripheral. CtpHDMIPeripheralStatusEntry .1.3.6.1.4.1.9.9.643.1.2.3.1 |
ctpHDMIPeripheralIndexThis object specifies a unique number for a peripheral HDMI.
If no peripheral has more than one HDMI, this
object will have value '1'. Unsigned32 .1.3.6.1.4.1.9.9.643.1.2.3.1.1 |
ctpHDMIPeripheralCableStatusThis object specifies cable status of an attached peripheral.
This object is set to 'loose' if system detects cable is
'unplugged' but power is 'on'.ro CtpPeripheralCableCode .1.3.6.1.4.1.9.9.643.1.2.3.1.2 |
ctpHDMIPeripheralPowerStatusThis object specifies power status of an attached peripheral.
This object is set to 'unknown' if system detects cable is
'unplugged'.ro CtpPeripheralPowerCode .1.3.6.1.4.1.9.9.643.1.2.3.1.3 |
ctpDVIPeripheralStatusTableThe table contains information about all peripherals
connected to the system via DVI. SEQUENCE OF CtpDVIPeripheralStatusEntry .1.3.6.1.4.1.9.9.643.1.2.4 |
ctpDVIPeripheralStatusEntryAn entry contains information about one peripheral
attached to the Telepresence system via DVI. CtpDVIPeripheralStatusEntry .1.3.6.1.4.1.9.9.643.1.2.4.1 |
ctpDVIPeripheralIndexThis object specifies a unique number for a peripheral DVI.
If no peripheral has more than one DVI, this
object will have value '1'.
Note that some Telepresence systems have no DVI port and some
Telepresence systems have only one DVI port. Unsigned32 .1.3.6.1.4.1.9.9.643.1.2.4.1.1 |
ctpDVIPeripheralCableStatusThis object specifies attached device
cable status reported by DVI.ro CtpPeripheralCableCode .1.3.6.1.4.1.9.9.643.1.2.4.1.2 |
ctpRS232PeripheralStatusTableThe table contains information about all peripherals
connected to the system via RS-232. SEQUENCE OF CtpRS232PeripheralStatusEntry .1.3.6.1.4.1.9.9.643.1.2.5 |
ctpRS232PeripheralStatusEntryAn entry contains information about one peripheral
attached to the Telepresence system via RS-232. CtpRS232PeripheralStatusEntry .1.3.6.1.4.1.9.9.643.1.2.5.1 |
ctpRS232PeripheralIndexThis object specifies a unique number for a peripheral RS-232.
If no peripheral has more than one RS-232, this
object will have value '1'.
Note that some Telepresence systems have no RS-232 port. Unsigned32 .1.3.6.1.4.1.9.9.643.1.2.5.1.1 |
ctpRS232PortIndexThe object specifies an index value that uniquely identifies
the RS-232 port to which this entry is applicable.
Its value is the same as RS-232-MIB's rs232PortIndex for
the port.
If RS-232-MIB is not supported by the agent, then this
value will have value '0'.ro InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.9.9.643.1.2.5.1.2 |
ctpRS232PeripheralConnStatusThis object specifies peripheral which is
connected via RS232.
When the object is 'connected(1)', peripheral connection
via RS232 is working properly.
When the object is 'unknown(2)', peripheral connection
via RS232 is not working properly. It may due to device problem
or connection problem.ro Enumeration .1.3.6.1.4.1.9.9.643.1.2.5.1.3 |
ctpPeripheralAttributeTableThe table contains information about attributes for the
peripherals which are connected to the system. Peripheral
attribute may specify peripheral's component information,
for example, an entry may specify lifetime of a lamp
on a presentation device. SEQUENCE OF CtpPeripheralAttributeEntry .1.3.6.1.4.1.9.9.643.1.2.6 |
ctpPeripheralAttributeEntryAn entry contains information about one peripheral
attribute related to the peripheral specified by
ctpPeripheralIndex. CtpPeripheralAttributeEntry .1.3.6.1.4.1.9.9.643.1.2.6.1 |
ctpPeripheralAttributeIndexThis object specifies a unique number for a peripheral
attribute.
If no peripheral has more than one attribute, this
object will have value '1'. Unsigned32 .1.3.6.1.4.1.9.9.643.1.2.6.1.1 |
ctpPeripheralAttributeDescrThis object specifies description of a attribute.
The supported attributes are
lampOperTime(1)
of a peripheral
lampState(2)
powerSwitchState(3)
of a peripheral
Note that not all peripheral contains all the supported
attributes. Agent reports whatever is available.ro Enumeration .1.3.6.1.4.1.9.9.643.1.2.6.1.2 |
ctpPeripheralAttributeValueThis object specifies value of the attribute corresponding
to ctpPeripheralAttributeDescr.
The possible value of the supported attributes is listed as
the following:
Attribute Unit SYNTAX
lampOperTime hours Unsigned32(0..4294967295)
lampState INTEGER {
on(1),
off(2),
failure(3),
unknown(4)
}
powerSwitchState INTEGER {
on(1),
off(2),
unknown(3)
}ro Unsigned32 .1.3.6.1.4.1.9.9.643.1.2.6.1.3 |
ctpUSBPeripheralStatusTableThis table contains information about all the peripherals
connected to the system via USB. SEQUENCE OF CtpUSBPeripheralStatusEntry .1.3.6.1.4.1.9.9.643.1.2.7 |
ctpUSBPeripheralStatusEntryAn entry drescribes a peripheral connected to the Telepresence
system through USB. CtpUSBPeripheralStatusEntry .1.3.6.1.4.1.9.9.643.1.2.7.1 |
ctpUSBPeripheralIndexThis object indicates an arbitrary positive, integer-value that
uniquely identifies the USB peripheral. Unsigned32 .1.3.6.1.4.1.9.9.643.1.2.7.1.1 |
ctpUSBPeripheralCableStatusThis object indicates the status of the cable attaching the USB
peripheral.ro CtpPeripheralCableCode .1.3.6.1.4.1.9.9.643.1.2.7.1.2 |
ctpUSBPeripheralPowerStatusThis object indicates the source of power for the
attached USB peripheral:
'unknown' - The source of power is unknown.
'self' - The USB peripheral is externally powered.
'bus' - The USB peripheral is powered by the USB bus.
'both' - The USB peripheral can be powered by both the
USB bus or selfro Enumeration .1.3.6.1.4.1.9.9.643.1.2.7.1.3 |
ctpUSBPeripheralPortTypeThis object indicates the type of device
connected to the USB port:
'host' - no device os connected to the port
'device' - a usb device is connected to the port
'hub' - a usb hub is connected to the portro Enumeration .1.3.6.1.4.1.9.9.643.1.2.7.1.4 |
ctpUSBPeripheralPortRateThis object indicates the current operational rate of
the USB peripheral:
'unknown' - The USB port rate is unknown
'low' - The USB port rate is at 1.5 Mbps.
'full' - The USB port rate is at 12 Mbps.
'high' - The USB port rate is at 480 Mbps.ro Enumeration .1.3.6.1.4.1.9.9.643.1.2.7.1.5 |
ctp802dot11PeripheralStatusTableThe table contains information about all peripherals
connected to the system via 802dot11. SEQUENCE OF Ctp802dot11PeripheralStatusEntry .1.3.6.1.4.1.9.9.643.1.2.8 |
ctp802dot11PeripheralStatusEntryAn entry describes one Telepresence 802dot11 peripheral. Ctp802dot11PeripheralStatusEntry .1.3.6.1.4.1.9.9.643.1.2.8.1 |
ctp802dot11PeripheralIndexThis object indicates an arbitrary positive, integer-value that
uniquely identifies the IEEE 802.11 peripheral. Unsigned32 .1.3.6.1.4.1.9.9.643.1.2.8.1.1 |
ctp802dot11PeripheralIfIndexThis object indicates an index value that uniquely identifies
the interface to which this entry is applicable.
If this entry doesn't have corresponding ifIndex, then this
value will have value '0'.ro InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.9.9.643.1.2.8.1.2 |
ctp802dot11PeripheralAddrTypeThis object indicates the type of address indicated by the
corresponding instance of ctp802dot11PeripheralAddr.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.9.9.643.1.2.8.1.3 |
ctp802dot11PeripheralAddrThis object indicates the address of the attached peripheral
in the format indicated by the corresponding instance of
ctp802dot11PeripheralAddrType.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.9.9.643.1.2.8.1.4 |
ctp802dot11PeripheralLinkStrengthThis object indicates the link strength of an IEEE 802.11 link
for a peripheral. A return value of 0 indicates the link is not
connected. A return value between 1 - 5 indicates the strength
of the link, with 1 being the weakest and 5 being the
strongest.ro Unsigned32 .1.3.6.1.4.1.9.9.643.1.2.8.1.5 |
ctp802dot11PeripheralLinkStatusThis object indicates the link status of the attached
peripheral via IEEE 802.11 link.ro CtpPeripheralCableCode .1.3.6.1.4.1.9.9.643.1.2.8.1.6 |
ctpDPPeripheralStatusTableThe table contains information about all peripherals
connected to the system via DP. SEQUENCE OF CtpDPPeripheralStatusEntry .1.3.6.1.4.1.9.9.643.1.2.9 |
ctpDPPeripheralStatusEntryAn entry contains information about one Telepresence
DP peripheral. CtpDPPeripheralStatusEntry .1.3.6.1.4.1.9.9.643.1.2.9.1 |
ctpDPPeripheralIndexThis object indicates a unique number for a peripheral DP.
If no peripheral has more than one DP, this
object will have value '1'. Unsigned32 .1.3.6.1.4.1.9.9.643.1.2.9.1.1 |
ctpDPPeripheralCableStatusThis object indicates the cable status of a peripheral which
is attached to the system via Display Port interface.
This object returns 'loose' if system detects cable is
'unplugged' but power is 'on'.ro CtpPeripheralCableCode .1.3.6.1.4.1.9.9.643.1.2.9.1.2 |
ctpDPPeripheralPowerStatusThis object indicates the power status of a peripheral which
is attached to the system via Display Port interface.
This object returns 'unknown' if system detects cable is
'unplugged'.ro CtpPeripheralPowerCode .1.3.6.1.4.1.9.9.643.1.2.9.1.3 |
ctpEventHistory OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.643.1.3 |
ctpPeripheralErrorHistTableSizeThis object specifies the maximum number of entries that the
ctpPeripheralErrorHistTable can contain. When the
capacity of the ctpPeripheralErrorHistTable has reached
the value specified by this object, then the agent
deletes the oldest entity in order to accommodate
the new entry. A value of '0' prevents any history
from being retained.
Some agents restrict the value of this object to be less than
500.rw Unsigned32 .1.3.6.1.4.1.9.9.643.1.3.1 |
ctpPeripheralErrorHistLastIndexThis object specifies the value of the
ctpPeripheralErrorHistIndex object corresponding to the
last entry added to the table by the agent.
If the management application uses the notifications defined
by this module, then it can poll this object to determine
whether it has missed a notification sent by the agent.ro Unsigned32 .1.3.6.1.4.1.9.9.643.1.3.2 |
ctpPeripheralErrorHistoryTableThis table contains a history of the detected peripheral
status changes.
After a management agent restart, when sysUpTime is reset to
zero, this table records all notifications until such time as
it becomes full. Thereafter, it remains full by retaining the
number of most recent notifications specified in
ctpPeripheralErrorHistTableSize. SEQUENCE OF CtpPeripheralErrorHistoryEntry .1.3.6.1.4.1.9.9.643.1.3.3 |
ctpPeripheralErrorHistoryEntryAn entry contains information about a Telepresence
peripheral status changes. CtpPeripheralErrorHistoryEntry .1.3.6.1.4.1.9.9.643.1.3.3.1 |
ctpPeripheralErrorHistoryIndexA unique non-zero integer value that identifies a
CtpPeripheralErrorHistoryEntry in the table.
The value of this index starts from '1' and monotonically
increases for each peripheral error known to the agent.
If the value of this object is '4294967295',
the agent will use '1' as the value of the
next detected peripheral status change. Unsigned32 .1.3.6.1.4.1.9.9.643.1.3.3.1.1 |
ctpPeripheralErrorIndexThe object specifies the value of ctpPeripheralIndex of a
peripheral which is in error state.
This object is deprecated in favor of
ctpPeripheralErrorDeviceCategory and
ctpPeripheralErrorDeviceNumber.ro Unsigned32 .1.3.6.1.4.1.9.9.643.1.3.3.1.2 |
ctpPeripheralErrorStatusThis object specifies the peripheral status after its status
changed.ro CtpPeripheralStatusCode .1.3.6.1.4.1.9.9.643.1.3.3.1.3 |
ctpPeripheralErrorTimeStampThis object specifies the value of the sysUpTime object at the
time the notification was generated.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.9.9.643.1.3.3.1.4 |
ctpPeripheralErrorDeviceCategoryThe object specifies peripheral device category after its
status changed.ro CtpPeripheralDeviceCategoryCode .1.3.6.1.4.1.9.9.643.1.3.3.1.5 |
ctpPeripheralErrorDeviceNumberThe object specifies peripheral device number after its
status changed.
Device number is unique within the same peripheral device
category.ro Unsigned32 .1.3.6.1.4.1.9.9.643.1.3.3.1.6 |
ctpSysUserAuthFailHistTableSizeThis object specifies the number of entries that the
ctpSysUserAuthFailHistTable can contain. When the
capacity of the ctpSysUserAuthFailHistTable has reached
the value specified by this object, then the agent
deletes the oldest entity in order to accommodate
the new entry. A value of '0' prevents any history
from being retained.
Some agents restrict the value of this object to be less than
500.rw Unsigned32 .1.3.6.1.4.1.9.9.643.1.3.4 |
ctpSysUserAuthFailHistLastIndexThis object specifies the value of the
ctpSysUserAuthFailHistIndex object corresponding to the
last entry added to the table by the agent.
If the management application uses the notifications defined
by this module, then it can poll this object to determine
whether it has missed a notification sent by the agent.ro Unsigned32 .1.3.6.1.4.1.9.9.643.1.3.5 |
ctpSysUserAuthFailHistoryTableThis table contains a history of detected user
authentication failures.
After a management agent restart, when sysUpTime is reset
to zero, this table records all user authentication failure
notifications until such time as it becomes full. Thereafter,
it remains full by retaining the number of most recent
notifications specified in ctpSysUserAuthFailHistTableSize. SEQUENCE OF CtpSysUserAuthFailHistoryEntry .1.3.6.1.4.1.9.9.643.1.3.6 |
ctpSysUserAuthFailHistoryEntryAn entry contains information about a Telepresence
system user authentication failure. CtpSysUserAuthFailHistoryEntry .1.3.6.1.4.1.9.9.643.1.3.6.1 |
ctpSysUserAuthFailHistoryIndexA unique non-zero integer value that identifies a
CtpSysUserAuthFailHistoryEntry in the table.
The value of this index starts from '1' and monotonically
increases for each system authentication failure event
known to the agent. If the value of this object is
'4294967295', the agent will use '1' as the value of
the next user authentication failure event. Unsigned32 .1.3.6.1.4.1.9.9.643.1.3.6.1.1 |
ctpSysUserAuthFailSourceAddrTypeThe object specifies the type of address contained
in the corresponding instance of ctpSysUserAuthFailSourceAddr.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.9.9.643.1.3.6.1.2 |
ctpSysUserAuthFailSourceAddrThe object specifies the source address when the
user authentication failure occurred, in the format given by
the corresponding instance of ctpSysUserAuthFailSourceAddrType.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.9.9.643.1.3.6.1.3 |
ctpSysUserAuthFailSourcePortThe object specifies the source TCP/UDP port number
when a user authentication failure occurred.ro Unsigned32 .1.3.6.1.4.1.9.9.643.1.3.6.1.4 |
ctpSysUserAuthFailUserNameThe object specifies the user name which was used to gain
system access when authentication failure occurred.ro SnmpAdminString .1.3.6.1.4.1.9.9.643.1.3.6.1.5 |
ctpSysUserAuthFailAccessProtocolThis object specifies the access protocol when a user
authentication failure occurred.ro CtpSystemAccessProtocol .1.3.6.1.4.1.9.9.643.1.3.6.1.6 |
ctpSysUserAuthFailTimeStampThis object specifies the value of the sysUpTime object at the
time the notification was generated.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.9.9.643.1.3.6.1.7 |
ciscoTelepresenceMIBConform OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.643.2 |
ciscoTelepresenceCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.643.2.1 |
ciscoTelepresenceMIBGroups OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.643.2.2 |