CISCO-TBRIDGE-DEV-IF-MIB
AI MIB Summary
The CISCO-TBRIDGE-DEV-IF-MIB monitors and configures interface-level parameters for Cisco transparent bridging devices, specifically tracking bridge port states, forwarding tables, and loop detection metrics. This module enables granular management of Layer 2 bridging functions, including port enablement, priority settings, and error counters for transparent bridge interfaces.
This MIB module provides network management support for configuration and status information of devices supporting transparent bridging functions.
Main OID:
ciscoTBridgeDevIfMIB.1.3.6.1.4.1.9.9.269
19
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
19 total| Object Name |
|---|
ciscoTBridgeDevIfMIBThis MIB module provides network management support
for configuration and status information of devices
supporting transparent bridging functions. MODULE-IDENTITY .1.3.6.1.4.1.9.9.269 |
ciscoTBridgeDevIfMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.269.1 |
ctbrDevInterface OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.269.1.1 |
ctbrDevInterfaceTableThis table provides configuration and information
of the device interfaces supporting transparent
bridging. This table has a sparse dependent
relationship with the ifTable. SEQUENCE OF CtbrDevInterfaceEntry .1.3.6.1.4.1.9.9.269.1.1.1 |
ctbrDevInterfaceEntryEach entry provides MAC and IP address related
configuration information of an interface. CtbrDevInterfaceEntry .1.3.6.1.4.1.9.9.269.1.1.1.1 |
ctbrDefaultPhyAddressThe default, factory-assigned MAC address of
the interface. Guaranteed to be unique across
all IEEE 802 devices.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.9.9.269.1.1.1.1.1 |
ctbrPhyAddressThe MAC address to be used by the interface.
If ctbrDefaultPhyAddress is used,
this is '00:00:00:00:00:00'.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.9.9.269.1.1.1.1.2 |
ctbrDefaultIpAddrTypeThe IP address type of the
ctbrDefaultIpAddress object.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.9.9.269.1.1.1.1.3 |
ctbrDefaultIpAddressThe default IP address of the interface. If BOOTP
or DHCP is enabled, this may be overridden by the
BOOTP or DHCP server.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.9.9.269.1.1.1.1.4 |
ctbrDefaultIpMaskTypeThe IP address type of the
ctbrDefaultIpMask object.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.9.9.269.1.1.1.1.5 |
ctbrDefaultIpMaskThe default IP netmask of the interface. If BOOTP
or DHCP is enabled, this may be overridden by the
BOOTP or DHCP server.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.9.9.269.1.1.1.1.6 |
ctbrIpAddressTypeThe IP address type of the
ctbrIpAddress object.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.9.9.269.1.1.1.1.7 |
ctbrIpAddressThe IP address currently in use by the interface.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.9.9.269.1.1.1.1.8 |
ctbrIpMaskTypeThe IP address type of the ctbrIpMask
object.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.9.9.269.1.1.1.1.9 |
ctbrIpMaskThe IP netmask currently in use by the interface.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.9.9.269.1.1.1.1.10 |
ctbrMSDUMaxLengthMaximum length of the data portion of a packet
for this particular interface. This is the
maximum MAC Service Data Unit length, which is
greater than or equal to ifMtu, depending on
the configured MAC-level encapsulation.ro Unsigned32 .1.3.6.1.4.1.9.9.269.1.1.1.1.11 |
ciscoTBridgeDevIfMIBConformance OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.269.2 |
ciscoTBridgeDevIfMIBCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.269.2.1 |
ciscoTBridgeDevIfMIBGroups OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.269.2.2 |