CISCO-SYSLOG-EVENT-EXT-MIB
AI MIB Summary
The CISCO-SYSLOG-EVENT-EXT-MIB extends Cisco's standard Syslog MIB to enable SNMP-based monitoring of device-generated syslog messages as discrete network events. This module facilitates the collection and processing of critical system event data, such as interface state changes, authentication failures, and configuration modifications, for centralized network management and alerting.
This MIB module extends the Cisco Syslog MIB and provides network management support to handle and process Syslog messages as device events.
Main OID:
ciscoSyslogEventExtMIB.1.3.6.1.4.1.9.9.270
15
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
15 total| Object Name |
|---|
ciscoSyslogEventExtMIBThis MIB module extends the Cisco Syslog
MIB and provides network management support
to handle and process Syslog messages as
device events. MODULE-IDENTITY .1.3.6.1.4.1.9.9.270 |
ciscoSyslogEventExtMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.270.1 |
cslogEventConfig OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.270.1.1 |
cslogEventDetailDefaultThis object defines the detail level at which
Syslog messages are displayed on the console or
HTML user interface. Detail level classifications
are:
noDisplay(1) - No display at all.
sparseDetail(2) - Minimum detail.
normalDetail(3) - General detail.
verboseDetail(4) - Verbose detail.
exhaustiveDetail(5) - Full detail.rw Enumeration .1.3.6.1.4.1.9.9.270.1.1.1 |
cslogEventSeverityDispConsoleThis object indicates which syslog severity
level messages can be displayed on the console.
A high severity value implies a low severity.
If the display bit on the object
cslogEventDisposition is set for this severity,
all messages have severity values less than or
equal to clogMaxSeverity and this object will
be displayed on the console.rw SyslogSeverity (CISCO-SYSLOG-MIB) .1.3.6.1.4.1.9.9.270.1.1.2 |
cslogEventSeverityDispHtmlGUIThis object indicates which syslog severity
level messages can be displayed on the event log
GUI. A high severity value implies a low severity.
If the display bit on the object
cslogEventDisposition is set for this severity,
all messages have severity values less than or
equal to clogMaxSeverity and this object will
be displayed on the event log GUI web pages.rw SyslogSeverity (CISCO-SYSLOG-MIB) .1.3.6.1.4.1.9.9.270.1.1.3 |
cslogEventSeverityDispHtmlConsolThis object indicates which syslog severity
level messages can be displayed on the HTML
event log console.
A high severity value implies a low severity.
If the display bit on the object
cslogEventDisposition is set for this severity,
all messages have severity values less than or
equal to clogMaxSeverity and this object will
be displayed on the GUI browser console page.rw SyslogSeverity (CISCO-SYSLOG-MIB) .1.3.6.1.4.1.9.9.270.1.1.4 |
cslogEventDispositionTableThis table contains parameters to configure
Syslog message disposition mechanisms and keep
message counts. SEQUENCE OF CslogEventDispositionEntry .1.3.6.1.4.1.9.9.270.1.1.5 |
cslogEventDispositionEntryThere is one entry per Syslog severity in the
cslogEventDispositionTable. Each entry contains
parameters for message disposition and count. CslogEventDispositionEntry .1.3.6.1.4.1.9.9.270.1.1.5.1 |
cslogEventDispositionSeverityThis object defines the Syslog serverity. SyslogSeverity (CISCO-SYSLOG-MIB) .1.3.6.1.4.1.9.9.270.1.1.5.1.1 |
cslogEventDispositionThis object defines the disposition method for
Syslog messages of a specific severity.rw CslogEventDisposition .1.3.6.1.4.1.9.9.270.1.1.5.1.2 |
cslogEventDispositionCountThis is the number of Syslog messages of a specific
severity.ro Counter32 .1.3.6.1.4.1.9.9.270.1.1.5.1.3 |
ciscoSlogEventExtMIBConformance OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.270.2 |
ciscoSlogEventExtMIBCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.270.2.1 |
ciscoSlogEventExtMIBGroups OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.270.2.2 |