CISCO-SWITCH-USAGE-MIB
AI MIB Summary
The CISCO-SWITCH-USAGE-MIB monitors Cisco switch hardware fabric utilization by tracking ingress packet and octet counts specifically routed through the switching fabric, distinct from standard interface counters in the IF-MIB. This module provides granular visibility into the actual switching capacity consumed by traffic on individual interfaces, excluding packets processed via the CPU or bypassing the fabric.
This MIB defines objects related to statistics for the usage of switch fabric. The switch fabric is used by the incoming packets from the line/network to a interface. Such packets are called ingress packets. Counters are maintained for number of ingress packets/ octets switched by the switch fabric for each interface.
NOTE: These counters are not counting the total number
of incoming packets and octets for a particular interface. Instead only the counts of packets and octets that actually use the switch-fabric are being accounted for by this MIB. Therefore, the counters in this MIB are distinctly different from packet and octet counters found in the IF-MIB.
17
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
17 total| Object Name |
|---|
ciscoSwitchUsageMIB OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.201 |
RFC1155-SMI Unknown .1.3.6.1.4.1.9.9.201 |
ciscoSwitchUsageMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.201.1 |
ciscoSwitchUsageStats OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.201.1.1 |
cswitchUsageStatTableA list of switch resouce usage statistics
entries. The statistics will give information
on the switch usage by each interface. SEQUENCE OF CswitchUsageStatEntry .1.3.6.1.4.1.9.9.201.1.1.1 |
cswitchUsageStatEntryEntry contains information of a particular
interface in terms of how much switch resource
it has used.
An entry in this table exists for each ifEntry
with an ifType of fastEther(62) for FastEthernet
interface and gigabitEthernet (117) for Gigabit
interface. CswitchUsageStatEntry .1.3.6.1.4.1.9.9.201.1.1.1.1 |
cswitchUsageByIngrsIntfPktsThe number of ingress packets of a interface
which use the switch resource.ro Counter .1.3.6.1.4.1.9.9.201.1.1.1.1.1 |
cswitchUsageByIngrsIntfHCPktsThe number of ingress packets of a interface
which use the switch resource.
This is a 64 bit (High Capacity) version of
the cswitchUsageByIngrsIntfPkts counter for
use with SNMP v2c or v3 Managers.ro --?? syntax is not convertable to SMIv1 Counter .1.3.6.1.4.1.9.9.201.1.1.1.1.2 |
cswitchUsageByIngrsIntfOctetsThe number of ingress octets of a interface
which use the switch resource.ro Counter .1.3.6.1.4.1.9.9.201.1.1.1.1.3 |
cswitchUsageByIngrsIntfHCOctetsThe number of ingress octets of a interface
which use the switch resource.
This is a 64 bit (High Capacity) version of
the cswitchUsageByIngrsIntfOctets counter for
use with SNMP v2c or v3 Managers.ro --?? syntax is not convertable to SMIv1 Counter .1.3.6.1.4.1.9.9.201.1.1.1.1.4 |
ciscoSwitchUsageMIBNotifyPrefix OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.201.2 |
ciscoSwitchUsageMIBNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.201.2.0 |
ciscoSwitchUsageMIBConformance OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.201.3 |
ciscoSwitchUsageMIBCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.201.3.1 |
ciscoSwitchUsageMIBCompliance OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.201.3.1.1 |
ciscoSwitchUsageMIBGroups OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.201.3.2 |
ciscoSwitchUsageMIBGroup OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.201.3.2.1 |