CISCO-SWITCH-MULTICAST-MIB
AI MIB Summary
The CISCO-SWITCH-MULTICAST-MIB enables monitoring and management of Layer 2/3 multicast switching operations on Cisco devices, specifically tracking replication mechanisms (ingress vs. egress), Multicast VRF (MVRF) states, and Designated Forwarder (DF) election metrics. It provides visibility into hardware resource allocation for Local Target Logic (LTL) and outgoing interface (OIF) forwarding tables to support Multicast VPN (MVPN) and VRF-lite environments.
This MIB module defines management objects for the Multicast Switching features on Cisco Layer 2/3 devices.
Definition of some of the terms used in this MIB:
Multicast Replication - The mechanism by which a system creates one or more copies of a multicast packet for forwarding.
Ingress Multicast Replication - A type of multicast replication where the replication engine on the ingress module always performs the whole replication.
Egress Multicast Replication - A type of multicast replication where the replication engines on both the ingress and egress modules perform the replication.
VPN - Virtual private network. A secure IP-based network that shares resources with one or more physical networks.
VRF - VPN Routing and Forwarding instance Consists of an IP routing table, a derived forwarding table, a set of interfaces that use the forwarding table, and a set of rules and routing protocols that determine what goes into the forwarding table.
MVPN - Multicast VPN
MVRF - Multicast VRF A VRF which has multicast routing enabled.
VRF-lite - A feature that enables a service provider to support two or more VPNs, where IP addresses can be overlapped among the VPNs.
LTL - Local Target Logic A hardware resource table to aid in switching.
OIF - Outgoing Interface The interface through which packets are forwarded out.
DF - Designated Forwarder.
Main OID:
ciscoSwitchMulticastMIB.1.3.6.1.4.1.9.9.504
86
Objects
Active
Status
10
Dependencies
Imported Objects
Objects
86 total| Object Name |
|---|
ciscoSwitchMulticastMIBThis MIB module defines management objects for the
Multicast Switching features on Cisco Layer 2/3
devices.
Definition of some of the terms used in this MIB:
Multicast Replication - The mechanism by which a
system creates one or more copies of a multicast
packet for forwarding.
Ingress Multicast Replication - A type of multicast
replication where the replication engine on the
ingress module always performs the whole replication.
Egress Multicast Replication - A type of multicast
replication where the replication engines on both
the ingress and egress modules perform the replication.
VPN - Virtual private network.
A secure IP-based network that shares resources
with one or more physical networks.
VRF - VPN Routing and Forwarding instance
Consists of an IP routing table, a derived
forwarding table, a set of interfaces that use
the forwarding table, and a set of rules and
routing protocols that determine what goes into
the forwarding table.
MVPN - Multicast VPN
MVRF - Multicast VRF
A VRF which has multicast routing enabled.
VRF-lite - A feature that enables a service
provider to support two or more VPNs, where IP
addresses can be overlapped among the VPNs.
LTL - Local Target Logic
A hardware resource table to aid in switching.
OIF - Outgoing Interface
The interface through which packets are
forwarded out.
DF - Designated Forwarder. MODULE-IDENTITY .1.3.6.1.4.1.9.9.504 |
cswmMIBNotifs OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.504.0 |
cswmMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.504.1 |
cswmGlobal OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.504.1.1 |
cswmMvpnHwSwitchingStatusIndicates the MVPN hardware switching status.
'notCapable' - This device is not capable of MVPN
hardware switching
'enable' - MVPN hardware switching is enabled.
'disable' - MVPN hardware switching is disabled.ro Enumeration .1.3.6.1.4.1.9.9.504.1.1.1 |
cswmVrfLiteStatusIndicates the VRF-Lite switching status.
'notCapable' - This device is not capable of VRF-Lite
switching.
'enable' - VRF-Lite switching is enabled.
'disable' - VRF-Lite switching is disabled.ro Enumeration .1.3.6.1.4.1.9.9.504.1.1.2 |
cswmMRouteConsistCheckSpecifies the Multicast Routing(mroute) Table
consistency checker support mode.
The consistency checker scans the mroute table
and assures that multicast-hardware entries are
consistent with mroute table.
'notCapable' - This device is not capable of mroute
consistency checker
'enable' - mroute consistency checker is enabled.
'disable' - mroute consistency checker is disabled.
When the value of this object is 'notCapable' the object
value is not writable.
The value 'notCapable' can not be set.rw Enumeration .1.3.6.1.4.1.9.9.504.1.1.3 |
cswmProcessorConsistCheckSpecifies the Processor consistency checker support mode.
In a multiple processor device, the consistency checker
assures that multicast flow entries are consistent across
processors.
Example: In a Catalyst 6000 series device, which has a
Route Processor (RP) and a Switch Processor (SP), the
consistency checker assures that multicast flow entries on
the Route Processor and the Switch Processor are consistent.
'notCapable' - This device is not capable of processor
consistency checker
'enable' - processor consistency checker is enabled.
'disable' - processor consistency checker is disabled.
When the value of this object is 'notCapable' the object
value is not writable.
The value 'notCapable' can not be set.rw Enumeration .1.3.6.1.4.1.9.9.504.1.1.4 |
cswmReplication OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.504.1.2 |
cswmReplCapabilityTableA table containing multicast replication capability
information. SEQUENCE OF CswmReplCapabilityEntry .1.3.6.1.4.1.9.9.504.1.2.1 |
cswmReplCapabilityEntryA conceptual row of cswmReplCapabilityTable, containing
the multicast replication capability information for
per module (identified by entPhysicalIndex) per Internet
address type supported on the managed system.
An entry is created by the agent at the system power-up or
module insertion. CswmReplCapabilityEntry .1.3.6.1.4.1.9.9.504.1.2.1.1 |
cswmReplCapabilityIndicates the multicast replication capability.
The replication capability of a module for a particular
address type is dependent on the hardware and software
capabilities of the module.ro Bits .1.3.6.1.4.1.9.9.504.1.2.1.1.1 |
cswmReplConfigTableA table containing multicast flow replication information
for the device. SEQUENCE OF CswmReplConfigEntry .1.3.6.1.4.1.9.9.504.1.2.2 |
cswmReplConfigEntryA conceptual row of cswmReplConfigTable, containing multicast
flow replication information. CswmReplConfigEntry .1.3.6.1.4.1.9.9.504.1.2.2.1 |
cswmReplConfigAddrTypeThe Internet address type supporting multicast flow
replication. InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.9.9.504.1.2.2.1.1 |
cswmReplConfigCurModeSpecifies the current mode of multicast flow replication
for this address type.
'notCapable' - This device is not capable of Multicast
flow replication for this address type.
'ingress' - The current mode of replication is
ingress.
'egressAndIngress' - The current mode of replication is
egress and ingress.
When the value of this object is 'notCapable' the object
value is not writable.
The value 'notCapable' can not be set.
The values of cswmReplCapability for the modules on the system
should be considered when setting the value for this object.
Certain systems may not be fully operational in a particular
replication mode if there is an inconsistency between
this object and the values of cswmReplCapability.rw Enumeration .1.3.6.1.4.1.9.9.504.1.2.2.1.2 |
cswmReplConfigAutoDetectSpecifies the auto-detection of multicast replication
mode for this address type.
'notCapable' - This device is not capable of Auto-detection
of multicast replication mode for this
address type.
'enable' - The auto-detection of multicast replication
mode is enabled.
'disable' - The auto-detection of multicast replication
mode is disabled.
When the value of this object is 'notCapable' the object
value is not writable.
The value 'notCapable' can not be set.rw Enumeration .1.3.6.1.4.1.9.9.504.1.2.2.1.3 |
cswmGlobalReplcationModeSpecifies the current mode of multicast flow replication
for all Internet address types supporting multicast flow
replication.
'notCapable' - This device is not capable of Multicast flow
replication.
'ingress' - The current mode of replication is ingress.
'egress' - The current mode of replication is egress.
When the value of this object is 'notCapable' the object
value is not writable.
The value 'notCapable' can not be set.
The values of cswmReplCapability for the modules on the system
should be considered when setting the value for this object.
Certain systems may not be fully operational in a particular
replication mode if there is an inconsistency between
this object and the values of cswmReplCapability.rw Enumeration .1.3.6.1.4.1.9.9.504.1.2.3 |
cswmMvrfStats OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.504.1.3 |
cswmMvrfStatsTableA table containing multicast flow statistics information on
each Multicast VPN routing/forwarding instance (MVRF). SEQUENCE OF CswmMvrfStatsEntry .1.3.6.1.4.1.9.9.504.1.3.1 |
cswmMvrfStatsEntryA conceptual row of cswmMvrfStatsTable, containing
multicast flow statistics for each MVRF. CswmMvrfStatsEntry .1.3.6.1.4.1.9.9.504.1.3.1.1 |
cswmMvrfNameThe human-readable name of this VPN. MplsVpnId (MPLS-VPN-MIB) .1.3.6.1.4.1.9.9.504.1.3.1.1.1 |
cswmMvrfTotalFlowsIndicates the total number of multicast flow entries
installed for this MVRF.ro Gauge32 .1.3.6.1.4.1.9.9.504.1.3.1.1.2 |
cswmMvrfPartialFlowsIndicates the total number of multicast partial short cut
flow entries installed for this MVRF.ro Gauge32 .1.3.6.1.4.1.9.9.504.1.3.1.1.3 |
cswmMvrfRpfMfdFlowsIndicates the total number of Reverse Path Forwarding(RPF)
Multicast Fast Drop(MFD) flow entries installed for this
MVRF.ro Gauge32 .1.3.6.1.4.1.9.9.504.1.3.1.1.4 |
cswmBiDirPimDfStats OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.504.1.4 |
cswmBiDirPimDfUsedThe number of Bi-directional PIM Designated Forwarder
entries currently in use by the default MVRF on the device.ro Unsigned32 UNITS "entries" .1.3.6.1.4.1.9.9.504.1.4.1 |
cswmBiDirPimDfTotalThe total number of Bi-directional PIM Designated Forwarder
entries for the default MVRF on the device.ro Unsigned32 UNITS "entries" .1.3.6.1.4.1.9.9.504.1.4.2 |
cswmMvrfBiDirPimDfUsageTableA table containing multicast Bi-directional PIM
Designated Forwarder usage information on
each Multicast VPN routing/forwarding instance (MVRF)
for every Internet address type supported. SEQUENCE OF CswmMvrfBiDirPimDfUsageEntry .1.3.6.1.4.1.9.9.504.1.4.3 |
cswmMvrfBiDirPimDfUsageEntryA conceptual row of cswmMvrfBiDirPimDfUsageTable, containing
multicast Bi-directional PIM Designated Forwarder
usage information on each MVRF per Internet address type. CswmMvrfBiDirPimDfUsageEntry .1.3.6.1.4.1.9.9.504.1.4.3.1 |
cswmMvrfBiDirPimDfAddrTypeThis object indicates the internet address type
for which the multicast Bi-directional PIM Designated
Forwarder usage information is collected. InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.9.9.504.1.4.3.1.1 |
cswmMvrfBiDirPimDfUsedThe number of Bi-directional PIM Designated Forwarder
entries currently in use.ro Unsigned32 UNITS "entries" .1.3.6.1.4.1.9.9.504.1.4.3.1.2 |
cswmMvrfBiDirPimDfTotalThe total number of Bi-directional PIM Designated Forwarder
entries.ro Unsigned32 UNITS "entries" .1.3.6.1.4.1.9.9.504.1.4.3.1.3 |
cswmLtlStats OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.504.1.5 |
cswmLtlUsedThis object indicates the number of Multicast LTL
entries currently used by this device.ro Unsigned32 .1.3.6.1.4.1.9.9.504.1.5.1 |
cswmLtlTotalThis object indicates the total number of Multicast
LTL entries available for this device.ro Unsigned32 .1.3.6.1.4.1.9.9.504.1.5.2 |
cswmForwarding OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.504.1.6 |
cswmForwardingTableA table containing multicast forwarding information. SEQUENCE OF CswmForwardingEntry .1.3.6.1.4.1.9.9.504.1.6.1 |
cswmForwardingEntryA conceptual row of cswmForwardingTable, containing multicast
forwarding information on a particular interface for every
Internet address type supported. CswmForwardingEntry .1.3.6.1.4.1.9.9.504.1.6.1.1 |
cswmInterfaceIndexThis object specifies the ifIndex for interface capable of
performing forwarding. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.9.9.504.1.6.1.1.1 |
cswmForwardingAddrTypeThis object specifies the internet address type of the
multicast forwarding. InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.9.9.504.1.6.1.1.2 |
cswmForwardingEnabledThis object specifies whether multicast forwarding
is supported on this interface for a particular
internet address type.
'notCapable' - A read-only value which indicates that
this interface is not capable of multicast
forwarding for this internet address
type.
This value cannot be used in SET operation.
'enable' - multicast forwarding is enabled.
'disable' - multicast forwarding is disabled.
This object is not writable if the value of this object
is 'notCapable'.rw Enumeration .1.3.6.1.4.1.9.9.504.1.6.1.1.3 |
cswmFlowQueryResult OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.504.1.7 |
cswmFlowMaxQueriesMaximum number of query entries allowed to be outstanding
at any time, in the cswmFlowQueryTable. The typical value
for this object is 5.ro Unsigned32 .1.3.6.1.4.1.9.9.504.1.7.1 |
cswmFlowQueryTableA control table used to query the switching engine by
specifying retrieval criteria for IP multicast L3 flows.
Each row instance in the table represents a query with
its parameters. The resulting per-flow data if requested
for each instance of a query in this table is returned
in the cswmFlowResultTable.
A row in this table can be created by setting the corresponding
instance of cswmFlowQueryStatus to 'createAndGo'.
A row can be deleted by setting the corresponding instance of
cswmFlowQueryStatus to 'destroy'.
The maximum number of entries (rows) in this table cannot
exceed the value of cswmFlowMaxQueries object. SEQUENCE OF CswmFlowQueryEntry .1.3.6.1.4.1.9.9.504.1.7.2 |
cswmFlowQueryEntryA conceptual row of the cswmFlowQueryTable used to
setup retrieval criteria to search for IP multicast L3
flows on a switching engine entity in the device. CswmFlowQueryEntry .1.3.6.1.4.1.9.9.504.1.7.2.1 |
cswmFlowQueryIndexAn arbitrary integer in the range of 1 to
cswmFlowMaxQueries to identify this control query. Unsigned32 .1.3.6.1.4.1.9.9.504.1.7.2.1.1 |
cswmFlowQueryMaskThis object is used to set up the query criteria for
the multicast flows of interest. If any one of the
defined BITs is set, then the objects(s) corresponding
to the BITS in the same row instance will be used for
the search.
Specifically, if the 'vrf' BIT is set, then the
cswmFlowQueryMvrf object will be included in the
search criteria. The 'vrf' BIT can be set in
combination with any other BIT for the search.
If the 'group' BIT is set, then the
cswmFlowQueryGroup object will be used as the
search criteria.
If the 'groupmask' BIT is set, then the
cswmFlowQueryGroup and cswmFlowQueryGroupMask objects
will be used as the search criteria.
If the 'source' BIT is set, then the
cswmFlowQuerySource and cswmFlowQueryGroup objects
will be used as the search criteria.
It is SNMP managers' responsibility to turn on certain
bits on in this object instance, if necessary,
and the corresponding flow parameter variables to the
appropriate values in order to setup the desired
query criteria.rw Bits .1.3.6.1.4.1.9.9.504.1.7.2.1.2 |
cswmFlowQueryMvrfThe human-readable name of the Multicast
Virtual Private Network (MVPN) routing/forwarding
instance (MVRF). When the 'mvrf' bit of
cswmFlowQueryMask object in the same row is on,
an appropriate value should be specified and only flows
with the specified MVRF name will be contained in the
result table. If the 'mvrf' bit in the associated
cswmFlowQueryMask is cleared, this object is ignored
during the query, and all the flows corresponding to the
default MVRF will be considered.rw MplsVpnId (MPLS-VPN-MIB) .1.3.6.1.4.1.9.9.504.1.7.2.1.3 |
cswmFlowQueryAddrTypeThe Internet address type for this multicast search
query.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.9.9.504.1.7.2.1.4 |
cswmFlowQuerySourceThe source Internet address of the IP multicast layer 3
flows. When the 'source' BIT of cswmFlowQueryMask
object in the same row is on,
an appropriate value should be specified and only flows
with the specified source address will be contained in the
result table. If the 'source' bit in the associated
cswmFlowQueryMask is off, this object is ignored
during the query.
The type of this address is determined by the value of the
cswmFlowQueryAddrType object.
The default value of this object is all zeros.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.9.9.504.1.7.2.1.5 |
cswmFlowQueryGroupThe multicast group Internet address of the queried flows.
When the 'group' or 'groupmask' bit of cswmFlowQueryMask
object in the same row is on, an appropriate value should be
specified and only flows with the specified group address
will be contained in the result table. If the 'group'
and 'groupmask' bits in the associated cswmFlowQueryMask
are both off, this object is ignored during the query.
The type of this address is determined by the value of the
cswmFlowQueryAddrType object.
The default value of this object is all zeros.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.9.9.504.1.7.2.1.6 |
cswmFlowQueryGroupMaskThe length of the Prefix associated with cswmFlowQueryGroup.
When the 'groupmask' bit of cswmFlowQueryMask object in the
same row is on, an appropriate value should be specified and
only rows with the specied group address prefix will be
returned in the result table. If the 'groupmask' bit in the
associated cswmFlowQueryMask is off, this object is ignored
during the query.
A value of zero causes all addresses to match.
This prefix length will be consistent with the type specified in
cswmFlowQueryAddrType.rw InetAddressPrefixLength (INET-ADDRESS-MIB) .1.3.6.1.4.1.9.9.504.1.7.2.1.7 |
cswmFlowQueryTypeThis object is used to set up the query type for
the multicast flows of interest.
If the 'perFlow' BIT is set, then, the entries
matching this query will be returned in
in cswmFlowResultTable.
If the 'perFlow' BIT is not set, then only
the total number of flows matching this query
are computed and returned in cswmFlowQueryTotalFlows,
and there will be no entries matching this query in
cswmFlowResultTable.
If the 'oifList' BIT is set, then the Outgoing Interface
(OIF) list is generated for each flow and populated
in cswmFlowResultTable.
If the 'dfList' BIT is set, then the Designated Forwarder
(DF) interfaces list is generated for each flow and populated
in cswmFlowResultTable.rw Bits .1.3.6.1.4.1.9.9.504.1.7.2.1.8 |
cswmFlowQueryEntityIndexThis object identifies the switching engine for which the
query is issued.
When the value of this object is 0, the query is performed
on the switching engine of the active supervisor.rw EntPhysicalIndexOrZero (CISCO-TC) .1.3.6.1.4.1.9.9.504.1.7.2.1.9 |
cswmFlowQuerySkipNFlowsThe number of searched flows to be skipped before storing
any multicast flows in cswmFlowResultTable, when the
'perFlow' bit is set in cswmFlowQueryType.
This object can be used along with cswmFlowMcastQueryMoreRows
object to skip previously found flows and only query the
remaining flows in the table.
Note that due to the dynamical nature of the L3 flows, the
queried flows may be missed or repeated by setting this object.rw Integer32 .1.3.6.1.4.1.9.9.504.1.7.2.1.10 |
cswmFlowQueryTotalFlowsThe number of flows matching the query criteria.
The value of this object will be zero when the 'perFlow'
bit is set in cswmFlowQueryType.ro Integer32 .1.3.6.1.4.1.9.9.504.1.7.2.1.11 |
cswmFlowMcastQueryRowsIndicating the status of the query by following values:
-1 - Either the query has not been started or the
agent is still processing this query instance.
It is the default value when the row is instantiated.
0..2147483647 - The search has ended and this is the
number of rows in the cswmFlowResultTable,
resulting from this query.ro Integer32 (-1..2147483647) .1.3.6.1.4.1.9.9.504.1.7.2.1.12 |
cswmFlowMcastQueryMoreRowsIf the value of the object is true when there are more
entries available matching this query criteria,
than the ones returned in cswmFlowResultTable.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.504.1.7.2.1.13 |
cswmFlowQueryOwnerThe manager entity that configured this entry and is therefore
using the resources assigned to it. It is used to model an
administratively assigned name of the owner of a resource.
It is recommended that this object have one or more the following
information: IP address, management station name, network
manager's name, location, or phone number.rw SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.9.9.504.1.7.2.1.14 |
cswmFlowQueryCreateTimeTime when this query was created.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.9.9.504.1.7.2.1.15 |
cswmFlowQueryStorageThe storage type for this conceptual row.rw StorageType (SNMPv2-TC) .1.3.6.1.4.1.9.9.504.1.7.2.1.16 |
cswmFlowQueryStatusThe status object used to manage rows in this table.
When set to 'active', the query to search for l3 multicast
flows is initiated. Once a row becomes active, values
within the row cannot be modified, except by deleting
and re-creating the row.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.9.9.504.1.7.2.1.17 |
cswmFlowResultTableA table containing current IP multicast flow information
corresponding to all the completed queries set up in
the cswmFlowQueryTable, that were initiated on the switch
engine(s) with the 'perFlow' bit set in cswmFlowQueryType.
The query result will not become available until
the current search completes. SEQUENCE OF CswmFlowResultEntry .1.3.6.1.4.1.9.9.504.1.7.3 |
cswmFlowResultEntryA conceptual row of cswmFlowResultTable, containing
information about an IP multicast layer 3 flow that matchs
the search criteria set in the corresponding row of
cswmFlowQueryTable. This row instance is indexed by
the query index (cswmFlowQueryIndex), and data entry index
(cswmFlowResultIndex). CswmFlowResultEntry .1.3.6.1.4.1.9.9.504.1.7.3.1 |
cswmFlowResultIndexA positive integer which uniquely identify a result entry
matching a particular query. Unsigned32 .1.3.6.1.4.1.9.9.504.1.7.3.1.1 |
cswmFlowResultMvrfThe MVRF to which this flow belongs to.ro MplsVpnId (MPLS-VPN-MIB) .1.3.6.1.4.1.9.9.504.1.7.3.1.2 |
cswmFlowResultAddrTypeThe Internet address type of cswmFlowResultGroup,
cswmFlowResultGroupMask and cswmFlowResultSource.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.9.9.504.1.7.3.1.3 |
cswmFlowResultGroupThe group address of the multicast layer 3 flow.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.9.9.504.1.7.3.1.4 |
cswmFlowResultGroupMaskThe length of the Prefix associated with cswmFlowResultGroup.
A value of zero causes all addresses to match. This prefix
length will be consistent with the type specified in
cswmFlowResultAddrType.ro InetAddressPrefixLength (INET-ADDRESS-MIB) .1.3.6.1.4.1.9.9.504.1.7.3.1.5 |
cswmFlowResultSourceThe source address of the multicast layer 3 flow.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.9.9.504.1.7.3.1.6 |
cswmFlowResultFlagsThis object indicates the corresponding flags for this flow:
'copy' - indicates that traffic is copied to CPU and
forwarded in hardware.
'punt' - indicates that traffic is punted to CPU and
forwarded in software.
'ineligible' - indicates that this flow is ineligible for
hardware installation.
'hwFail' - indicates that this flow failed to install
in hardware.
'bidir' - indicates that this flow is a Bidir flow.ro Bits .1.3.6.1.4.1.9.9.504.1.7.3.1.7 |
cswmFlowResultRpfInterfaceThis object represents either the InterfaceIndex of RPF
interface for a RPF flow or 0 (zero). The value of zero means
that this flow is a non-RPF flow.ro InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.9.9.504.1.7.3.1.8 |
cswmFlowResultPacketsThe total number of multicast traffic packets forwarded
for this flow.ro Counter64 .1.3.6.1.4.1.9.9.504.1.7.3.1.11 |
cswmFlowResultOctetsThe total number of multicast traffic octets forwarded
for this flow.ro Counter64 .1.3.6.1.4.1.9.9.504.1.7.3.1.12 |
cswmFlowResultOIFTableA table containing list of OIF
for a flow listed in cswmFlowResultTable. SEQUENCE OF CswmFlowResultOIFEntry .1.3.6.1.4.1.9.9.504.1.7.4 |
cswmFlowResultOIFEntryA conceptual row of cswmFlowResultOIFTable, containing
information about the list of OIF for a flow
listed in cswmFlowResultTable. An entry is created
only when the 'oifList' bit is set in cswmFlowQueryType. CswmFlowResultOIFEntry .1.3.6.1.4.1.9.9.504.1.7.4.1 |
cswmFlowResultOIFIndexA positive integer which uniquely identifies a list of OIF
for a particular result flow matching a particular query. Unsigned32 .1.3.6.1.4.1.9.9.504.1.7.4.1.1 |
cswmFlowResultOIFIntListThe object lists the ifIndex for a set of 64 OIF for a
particular flow.ro CiscoInterfaceIndexList (CISCO-TC) .1.3.6.1.4.1.9.9.504.1.7.4.1.2 |
cswmFlowResultDFTableA table containing list of DF interfaces for a flow
listed in cswmFlowResultTable. SEQUENCE OF CswmFlowResultDFEntry .1.3.6.1.4.1.9.9.504.1.7.5 |
cswmFlowResultDFEntryA conceptual row of cswmFlowResultDFTable, containing
information about the list of DF Interfaces for a flow
listed in cswmFlowResultTable. An entry is created
only when the 'dfList' bit is set in cswmFlowQueryType. CswmFlowResultDFEntry .1.3.6.1.4.1.9.9.504.1.7.5.1 |
cswmFlowResultDFIndexA positive integer which uniquely identifies a list of DF
interfaces for a particular flow matching a particular query. Unsigned32 .1.3.6.1.4.1.9.9.504.1.7.5.1.1 |
cswmFlowResultDFIntListThe object lists the ifIndex for a set of 64 DF interfaces
for a particular flow.ro CiscoInterfaceIndexList (CISCO-TC) .1.3.6.1.4.1.9.9.504.1.7.5.1.2 |
cswmMIBConform OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.504.2 |
cswmMIBCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.504.2.1 |
cswmMIBGroups OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.504.2.2 |