CISCO-SSM-PROV-MIB
AI MIB Summary
The CISCO-SSM-PROV-MIB manages feature provisioning on Cisco Storage Service Module Data Path Processors by mapping contiguous port ranges to specific DPP instances for independent feature execution. It enables configuration of storage service features by defining start and end port identifiers to allocate processing resources within the module's architecture.
This MIB is used to provision features on a Data Path Processor (DPP) of a Storage Service Module (SSM). A DPP is assigned to a contiguous set of ports. Each DPP can run one or more features independent of other DPPs on the module. Since the concept of a DPP is transparent to the network manager, ranges of ports are used to configure different features. A start and an end port are specified to identify a DPP and provision a feature.
Main OID:
ciscoSsmProvMIB.1.3.6.1.4.1.9.9.448
23
Objects
Active
Status
7
Dependencies
Imported Objects
Objects
23 total| Object Name |
|---|
ciscoSsmProvMIBThis MIB is used to provision features
on a Data Path Processor (DPP) of a Storage Service
Module (SSM). A DPP is assigned to a contiguous
set of ports. Each DPP can run one or more
features independent of other DPPs on the module.
Since the concept of a DPP is transparent to the
network manager, ranges of ports are used to
configure different features. A start and an end
port are specified to identify a DPP and
provision a feature. MODULE-IDENTITY .1.3.6.1.4.1.9.9.448 |
ciscoSsmProvMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.448.1 |
ssmProvConfiguration OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.448.1.1 |
ssmProvFeatureTableA table containing list of features that can be
provisioned on an SSM. SEQUENCE OF SsmProvFeatureEntry .1.3.6.1.4.1.9.9.448.1.1.1 |
ssmProvFeatureEntryAn entry in the ssmProvFeatureTable that contains
information on the features that can be configured
on an SSM. SsmProvFeatureEntry .1.3.6.1.4.1.9.9.448.1.1.1.1 |
ssmProvFeatureNameThe name of the feature that can be provisioned
on the SSM. SnmpAdminString .1.3.6.1.4.1.9.9.448.1.1.1.1.1 |
ssmProvFeatureNeedsImageThe object indicates if the feature needs an
image name to be specified during provisioning.
If the value of this object is 'true', then an
image needs to be specified.
If the value of this object is 'false', then an
image does not need to be specified.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.448.1.1.1.1.2 |
ssmProvFeatureIfTableA table containing feature related information
for interfaces. This table gives a list of
interfaces that are assigned to different features.
The interfaces supported are of the type
fibreChannel.
If a feature is removed from ssmProvFeatureTable,
then corresponding entries in ssmProvFeatureIfTable
will also get removed. SEQUENCE OF SsmProvFeatureIfEntry .1.3.6.1.4.1.9.9.448.1.1.2 |
ssmProvFeatureIfEntryThis contains information on the SSM-feature
membership of a interface. SsmProvFeatureIfEntry .1.3.6.1.4.1.9.9.448.1.1.2.1 |
ssmProvFeatureIfStartPortThe starting interface index on the SSM card to
which a feature is going to be assigned. A feature
is assigned to a DPP by specifying a starting and
ending port. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.9.9.448.1.1.2.1.1 |
ssmProvFeatureIfEndPortThe end interface index on the SSM card to
which a feature is going to be assigned. A
feature is assigned to a DPP by specifying a
start and end port. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.9.9.448.1.1.2.1.2 |
ssmProvFeatureIfFeatureNameThe SSM feature name bound to the interface. This
must be one of the features listed in
ssmProvFeatureTable. SnmpAdminString .1.3.6.1.4.1.9.9.448.1.1.2.1.3 |
ssmProvFeatureIfForceRemoveThis object indicates if the provisioning should be
forcefully removed. The object must be set
concurrently with setting the corresponding instance
of ssmProvFeatureIfRowStatus to 'destroy'.
The 'forceReset' option will cause the configuration
to be removed and the SSM card to be reset in the
process.
No action is taken if this object is set to 'noop'.
The value of this object when read is always 'noop'.rw Enumeration .1.3.6.1.4.1.9.9.448.1.1.2.1.4 |
ssmProvFeatureIfPartnerImageURIThe object representing the location on the local
system, from where the partner image will be picked
for installation. The value of this object is only
relevant if the ssmProvFeatureNeedsImage object is
set to 'true' for that feature in
ssmProvFeatureTable.rw SnmpAdminString .1.3.6.1.4.1.9.9.448.1.1.2.1.5 |
ssmProvFeatureIfRowStatusThe status of this conceptual row.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.9.9.448.1.1.2.1.6 |
ssmProvDppTableA table containing DPP information for interfaces.
This table gives a list of DPPs for every interface.
Entries get added to the table when an SSM comes
online and removed when it goes offline. SEQUENCE OF SsmProvDppEntry .1.3.6.1.4.1.9.9.448.1.1.3 |
ssmProvDppEntryThis contains information on the DPP to interface
association. SsmProvDppEntry .1.3.6.1.4.1.9.9.448.1.1.3.1 |
ssmProvDppStartPortThe starting interface index on the SSM card
that corresponds to a DPP. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.9.9.448.1.1.3.1.1 |
ssmProvDppEndPortThe ending interface index on the SSM card
that corresponds to a DPP.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.9.9.448.1.1.3.1.2 |
ssmProvDppNameThe DPP that is associated with the given
starting and ending interface.ro SnmpAdminString .1.3.6.1.4.1.9.9.448.1.1.3.1.3 |
ciscoSsmProvMIBConform OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.448.2 |
ssmProvMIBCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.448.2.1 |
ssmProvMIBGroups OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.448.2.2 |