Home/Catalog/CISCO-SRST-MIB

CISCO-SRST-MIB

AI MIB Summary

The CISCO-SRST-MIB enables SNMP-based monitoring and configuration of Cisco IOS routers operating in Survivable Remote Site Telephony mode to manage fallback call processing for IP phones during WAN outages. It tracks critical telephony state metrics including ephone registration status, ephoneDN availability, and button association tables to ensure voice service continuity in distributed branch office environments.

This MIB allows management of Cisco Survivable Remote Site Telephony (SRST) feature in Cisco IOS. SRST is an optional software feature that provides Cisco CallManager with fallback support for Cisco IP phones attached to a Cisco router on a local network. The CISCO-CCME-MIB provides management of Cisco CallManager Express (CCME) feature in Cisco IOS. CCME is an optional software feature that enables Cisco routers to deliver IP telephony services for small office environment. Ephone, ephoneDN, button association tables are common to both CCME and SRST MIBs and are defined in CISCO-CCME-MIB. Ephone specific notifications which are common to CCME and SRST are also defined in CISCO-CCME-MIB.
Main OID:
ciscoSrstMIB.1.3.6.1.4.1.9.9.441
100
Objects
Active
Status
7
Dependencies

Imported Objects

Objects

100 total
Object Name
ciscoSrstMIBThis MIB allows management of Cisco Survivable Remote Site Telephony (SRST) feature in Cisco IOS. SRST is an optional software feature that provides Cisco CallManager with fallback support for Cisco IP phones attached to a Cisco router on a local network. The CISCO-CCME-MIB provides management of Cisco CallManager Express (CCME) feature in Cisco IOS. CCME is an optional software feature that enables Cisco routers to deliver IP telephony services for small office environment. Ephone, ephoneDN, button association tables are common to both CCME and SRST MIBs and are defined in CISCO-CCME-MIB. Ephone specific notifications which are common to CCME and SRST are also defined in CISCO-CCME-MIB.
MODULE-IDENTITY
.1.3.6.1.4.1.9.9.441
ciscoSrstMIBNotifications
OBJECT IDENTIFIER
.1.3.6.1.4.1.9.9.441.0
csrstStateChangeAn SRST up or down state change notification is generated. This indicates one or more phones is registered to the SRST router or none is registered.
NOTIFICATION-TYPE
.1.3.6.1.4.1.9.9.441.0.1
csrstFailNotifA failure notification is generated when the SRST router encounters a catastrophic failure.
NOTIFICATION-TYPE
.1.3.6.1.4.1.9.9.441.0.2
csrstSipPhoneUnRegThresholdExceedA SIP phone unregistration notification is generated when the number of SIP phone unregistrations have exceeded the threshold. The number of currently registered SIP phones is provided here by csrstSipPhoneCurrentRegistered object as a reference such that if csrstSipPhoneCurrentRegistered falls below csrstSipPhoneUnRegThreshold, a notification will be generated to indicate that the number of unregistered SIP phones has crossed the threshold.
NOTIFICATION-TYPE
.1.3.6.1.4.1.9.9.441.0.3
csrstSipPhoneRegFailedA SIP phone fail registration notification is generated when the SIP phone fails to register.
NOTIFICATION-TYPE
.1.3.6.1.4.1.9.9.441.0.4
csrstConferenceFailedA conference failure notification is generated when the maximum number of conferences are exceeded.
NOTIFICATION-TYPE
.1.3.6.1.4.1.9.9.441.0.5
ciscoSrstMIBObjects
OBJECT IDENTIFIER
.1.3.6.1.4.1.9.9.441.1
csrstGlobal
OBJECT IDENTIFIER
.1.3.6.1.4.1.9.9.441.1.1
csrstConf
OBJECT IDENTIFIER
.1.3.6.1.4.1.9.9.441.1.2
csrstEnabledCisco SRST support is enabled or disabled. When enabled, the router is in fallback mode to provide call-handling support to IP phones. If disabled, all of the objects in this group have no significance.ro
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.9.9.441.1.2.1
csrstVersionCisco SRST version.ro
SnmpAdminString
.1.3.6.1.4.1.9.9.441.1.2.2
csrstIPAddressTypeInternet address type governing the address type format for one or more InetAddress objects in this MIB. The associated InetAddress objects' description will refer back to this type object as appropriate.ro
InetAddressType (INET-ADDRESS-MIB)
.1.3.6.1.4.1.9.9.441.1.2.3
csrstIPAddressCisco SRST IP address for the router to receive messages from IP phones, typically one of the addresses of an Ethernet port of the router. The type of IP address used here is indicated by the csrstSysIPAddressType object.ro
InetAddress (INET-ADDRESS-MIB)
.1.3.6.1.4.1.9.9.441.1.2.4
csrstPortNumberThis object indicates the TCP port number to use for Skinny Client Control Protocol (SCCP) and is range limited. This port also indicates through which IP phones communicate with SRST.ro
InetPortNumber
.1.3.6.1.4.1.9.9.441.1.2.5
csrstMaxConferencesMaximum number of simultaneous three-party conference calls configured on the router. Range is IOS version and platform dependent. With SRST Version 3.0 onwards, the following are the maximum values for each platform - Cisco 1751, Cisco 1760, Cisco 2600, Cisco 3640 - 8 conferences. Cisco 3660, Cisco 3725, Cisco 3745 - 16 conferences. Default is half the maximum number of simultaneous three-party conferences for each platform.ro
Unsigned32
.1.3.6.1.4.1.9.9.441.1.2.6
csrstMaxEphonesMaximum number of Cisco IP phones configured on the SRST router. Range is IOS version and platform dependent.ro
Unsigned32
.1.3.6.1.4.1.9.9.441.1.2.7
csrstMaxDNMaximum number of IP phones extensions (ephone-dns) or directory number configured on this SRST router. Range is IOS version and platform dependent. Default is 0.ro
Unsigned32
.1.3.6.1.4.1.9.9.441.1.2.8
csrstSipPhoneUnRegThresholdThis object indicates a threshold for the number of SIP phones unregistered to SRST. This threshold is changeable by the NMS user.rw
Unsigned32
.1.3.6.1.4.1.9.9.441.1.2.9
csrstCallFwdNoAnswerCisco SRST call forwarding number when a Cisco IP phone is not answered. This directory number is a fully qualified E.164 number.ro
CvE164Address
.1.3.6.1.4.1.9.9.441.1.2.10
csrstCallFwdNoAnswerToTimeout in seconds if a Cisco IP phone is not answered, Cisco SRST will call forward to another directory number.ro
Unsigned32 UNITS "seconds"
.1.3.6.1.4.1.9.9.441.1.2.11
csrstCallFwdBusyCisco SRST call forwarding number when a Cisco IP phone is busy. This directory number is a fully qualified E.164 number.ro
CvE164Address
.1.3.6.1.4.1.9.9.441.1.2.12
csrstMohFilenameCisco SRST Music-On-Hold is enabled with file on flash, or disabled without a file on flash. MOH is enabled by default.ro
SnmpAdminString
.1.3.6.1.4.1.9.9.441.1.2.13
csrstMohMulticastAddrTypeInternet address type governing the address type format for one or more InetAddress objects in this MIB. The associated InetAddress objects' description will refer back to this type object as appropriate.ro
InetAddressType (INET-ADDRESS-MIB)
.1.3.6.1.4.1.9.9.441.1.2.14
csrstMohMulticastAddrThis object indicates Cisco SRST Music-On-Hold Multicast IP address. When configured, this feature enables continuous IP multicast output of MOH from a Flash MOH file. This object has no significance if MOH is not configured. Default is the csrstIPAddress object for Cisco SRST. The type of IP address used here is indicated by the csrstMohMulticastAddrType object.ro
InetAddress (INET-ADDRESS-MIB)
.1.3.6.1.4.1.9.9.441.1.2.15
csrstMohMulticastPortThis object indicates Cisco SRST Music-On-Hold Multicast TCP port which is range limited. When configured, this feature enables continuous IP multicast output of MOH from a Flash MOH file. This object has no significance if MOH is not configured.ro
InetPortNumber
.1.3.6.1.4.1.9.9.441.1.2.16
csrstVoiceMailNumberCisco SRST voice mail number that is speed-dialed when the messages button on a Cisco IP phone is pressed. This voice mail number is a fully qualified E.164 number. If voice-mail number is not configured, this object will have a string length of 2 with the value '**'.ro
CvE164Address
.1.3.6.1.4.1.9.9.441.1.2.17
csrstSystemMessagePrimaryCisco SRST system static text message that is displayed on Cisco IP phone during fallback. Length of text string is less than 32 characters. Default message is 'CM Fallback Service Operating'.ro
SnmpAdminString
.1.3.6.1.4.1.9.9.441.1.2.18
csrstSystemMessageSecondaryCisco SRST system message that is displayed on Cisco IP phone that does not support static text message and have a limited display space during fallback. Length of text string is less than 20 characters. Default messages is 'CM Fallback Service'.ro
SnmpAdminString
.1.3.6.1.4.1.9.9.441.1.2.19
csrstScriptNameCisco SRST session-level IVR application script. This application can be written written in Tool Command Language (TCL) and is applied to all Cisco IP phone lines served by the SRST router. If no application script name is configured, the default built-in IOS application will be applied to all phone lines served by the SRST router and this object will be a zero-length string.ro
SnmpAdminString
.1.3.6.1.4.1.9.9.441.1.2.20
csrstSecondaryDialToneCisco SRST secondary dial tone digits. When a Cisco IP phone user dials a PSTN access prefix, defined by the secondary dial tone digits, the secondary dial tone is enabled.ro
CvE164Address
.1.3.6.1.4.1.9.9.441.1.2.21
csrstTransferSystemCisco SRST call transfer method using the ITU-T H.450.2 standard. Default setting is blind. blind - Calls are transferred without consultation using a single phone line and the Cisco proprietary method. fullBlind - Calls are transferred without consultation using H.450.2 standard methods. fullConsult - Calls are transferred using H.450.2 with consultation using the second phone line if available, or the calls fall back to full-blind if the second line is unavailable. localConsult - Calls are transferred with local consultation using the second phone line if available, or the calls fall back to blind for non- local consultation or transfer target. This mode is intended for use primarily in Voice over Frame Relay (VoFR) networks.ro
Enumeration
.1.3.6.1.4.1.9.9.441.1.2.22
csrstUserLocaleInfoCisco SRST language for displays on Cisco IP phone by country. Deprecated and superseded by csrstUserLocaleInfoRev1, as current implementation supports 5 user locales at the same time.rodeprecated
CountryCode (CISCO-TC)
.1.3.6.1.4.1.9.9.441.1.2.23
csrstDateFormatDate display format on Cisco IP phones in the Cisco SRST system.ro
Enumeration
.1.3.6.1.4.1.9.9.441.1.2.24
csrstTimeFormatTime dispay format on Cisco IP phones in the Cisco SRST system. 1 - 12 hour clock. 2 - 24 hour clock.ro
Enumeration
.1.3.6.1.4.1.9.9.441.1.2.25
csrstInterdigitToCisco SRST interdigit timeout duration in seconds for Cisco IP phones.ro
Unsigned32 UNITS "seconds"
.1.3.6.1.4.1.9.9.441.1.2.26
csrstBusyToCisco SRST time in seconds before disconnect when destination is busy, without call-forwarding.ro
Unsigned32 UNITS "seconds"
.1.3.6.1.4.1.9.9.441.1.2.27
csrstAlertToCisco SRST time in seconds before disconnect when call is not answered, without call-forwarding.ro
Unsigned32 UNITS "seconds"
.1.3.6.1.4.1.9.9.441.1.2.28
csrstXlateCalledNumberThis object indicates the tag of a corresponding translation rule, which utilizes the number-translation mechanism of the IOS to translate a called number on the Cisco SRST router.ro
Unsigned32
.1.3.6.1.4.1.9.9.441.1.2.29
csrstXlateCallingNumberThis object indicates the tag of a corresponding translation rule, which utilizes the number-translation mechanism of the IOS to translate a calling number on the Cisco SRST router.ro
Unsigned32
.1.3.6.1.4.1.9.9.441.1.2.30
csrstAliasTableA list of alias pattern configured on this SRST router.
SEQUENCE OF CsrstAliasEntry
.1.3.6.1.4.1.9.9.441.1.2.31
csrstAliasEntryInformation about a configured alias pattern. There is an entry in this table for each alias pattern configured on this device.
CsrstAliasEntry
.1.3.6.1.4.1.9.9.441.1.2.31.1
csrstAliasIndexAn index in sequential order that indicates an alias pattern configured on this SRST router.
Unsigned32
.1.3.6.1.4.1.9.9.441.1.2.31.1.1
csrstAliasTagA unique sequence number that indicates a particular alias pattern configured on this SRST router.ro
Unsigned32
.1.3.6.1.4.1.9.9.441.1.2.31.1.2
csrstAliasNumPatternThis object indicates the pattern to match the incoming telephone number. It may include wildcards.ro
SnmpAdminString
.1.3.6.1.4.1.9.9.441.1.2.31.1.3
csrstAliasAltNumberThis object indicates the alternate tele- phone number to route incoming calls to match the number pattern. This has to be a valid extension for an IP phone actively registered on the SRST router.ro
SnmpAdminString
.1.3.6.1.4.1.9.9.441.1.2.31.1.4
csrstAliasPreferenceThis object indicates the preference value of the associated dial-peer. A value of 0 has the highest preference.ro
Unsigned32
.1.3.6.1.4.1.9.9.441.1.2.31.1.5
csrstAliasHuntStopEnabledThis object specifies that if hunt stop is enabled, after the caller tried the alternate number according to the alias pattern, it will stop call hunting. If hunt stop is disabled, it will rollover to another directory number if available.ro
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.9.9.441.1.2.31.1.6
csrstAccessCodeTableA list of access-code to trunk lines configured on this SRST router.
SEQUENCE OF CsrstAccessCodeEntry
.1.3.6.1.4.1.9.9.441.1.2.32
csrstAccessCodeEntryInformation about a configured access-code to trunk lines. There is an entry in this table for each access configured on this device.
CsrstAccessCodeEntry
.1.3.6.1.4.1.9.9.441.1.2.32.1
csrstAccessCodeTypeThis object indicates the type of trunk line to which the access-code is applied to. The type of trunk lines can be fxo, e&m, bri, and pri. fxo - Enables a foreign exchange office (FXO) interface. em - Enables an analog ear and mouth (E&M) interface. bri - Enables a BRI interface. pri - Enables a PRI interface.ro
Enumeration
.1.3.6.1.4.1.9.9.441.1.2.32.1.1
csrstAccessCodeThis object indicates the access-code to be applied to the corresponding trunk line by creating dial-peers.ro
SnmpAdminString
.1.3.6.1.4.1.9.9.441.1.2.32.1.2
csrstAccessCodeDIDEnabledThis object indicates the direct-inward- dial on a POTS dial-peer is enabled or disabled.ro
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.9.9.441.1.2.32.1.3
csrstLimitDNTableA list of configured limit-dn avail- able to each Cisco IP phone type on this SRST router.
SEQUENCE OF CsrstLimitDNEntry
.1.3.6.1.4.1.9.9.441.1.2.33
csrstLimitDNEntryInformation about a configured limit-dn. There is an entry in this table for each limit-dn configured for a Cisco phone type on this device.
CsrstLimitDNEntry
.1.3.6.1.4.1.9.9.441.1.2.33.1
csrstLimitDNTypeThis object indicates the type of IP phone to which the limit-dn is applied to.ro
Enumeration
.1.3.6.1.4.1.9.9.441.1.2.33.1.1
csrstLimitDNThis object indicates the maximum number of directory numbers available to each type of IP phone. The current range of maximum lines setting is from 1 to 34. The default is 34. DEFVAL { 34 }ro
Unsigned32
.1.3.6.1.4.1.9.9.441.1.2.33.1.2
csrstNotificationEnabledThis variable indicates whether this system produces the SRST notifications. A false value will prevent SRST notifications from being generated by this system.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.9.9.441.1.2.34
csrstUserLocaleInfoRev1Cisco SRST language for displays on Cisco IP phone by country. Every set of character separated by a forward slash ('/') represents one user-locale whose value may be any one of the following languages or one configured by the user. At the same time 5 user locales can be configured. | DE Germany | | DK Denmark | | ES Spain | | FR France | | IT Italy | | JP Japan | | NL Netherlands | | NO Norway | | PT Portugal | | RU Russian Federation | | SE Sweden | | US United States | Example: if csrstUserLocaleInfoRev1 returns 'DE/US/SE/FR/RU' then : UserLocale 1 = DE UserLocale 2 = US UserLocale 3 = SE UserLocale 4 = FR UserLocale 5 = RUro
DisplayString
.1.3.6.1.4.1.9.9.441.1.2.35
csrstActiveStats
OBJECT IDENTIFIER
.1.3.6.1.4.1.9.9.441.1.3
csrstStateThis object indicates the current state of Cisco SRST feature on this router. Active - At least one IP or SIP phone is registered Inactive - Cisco SRST has no IP or SIP phones registered This object has no significance if csrstEnabled object is disabled.ro
SrstOperType
.1.3.6.1.4.1.9.9.441.1.3.1
csrstSipPhoneCurrentRegisteredTotal number of SIP phones currently registered to the SRST router.ro
Gauge32
.1.3.6.1.4.1.9.9.441.1.3.2
csrstSipCallLegsTotal number of SIP call legs routed through the SRST router since going active. This includes incoming and outgoing calls.ro
Counter32
.1.3.6.1.4.1.9.9.441.1.3.3
csrstTotalUpTimeAccumulated total number of minutes that router is active in SRST mode.ro
Counter32 UNITS "minutes"
.1.3.6.1.4.1.9.9.441.1.3.4
csrstSipConf
OBJECT IDENTIFIER
.1.3.6.1.4.1.9.9.441.1.4
csrstSipRegSrvExpMaxThis object indicates the maximum expiration time for the SIP Registrar Server to timeout on a registration.ro
Integer32
.1.3.6.1.4.1.9.9.441.1.4.1
csrstSipRegSrvExpMinThis object indicates the minimum expiration time for the SIP Registrar Server to timeout on a registration.ro
Integer32
.1.3.6.1.4.1.9.9.441.1.4.2
csrstSipIp2IpGlobalEnabledThis object indicates whether voip calls are re-directed ip to ip globally.ro
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.9.9.441.1.4.3
csrstSipSend300MultSupportThis object indicates whether the redirect contact order is best or longest match. This applies globally for SIP. bestMatch - Uses the current system configuration to set the order of contacts. longestMatch - Sets the contact order by using the destination pattern longest match first, and then the second longest match, the third longest match, etc..ro
Enumeration
.1.3.6.1.4.1.9.9.441.1.4.4
csrstSipVoRegPoolTableThis table contains general information about the configured voice register pool for SIP endpoints (dial-peers) on this SRST router.
SEQUENCE OF CsrstSipVoRegPoolEntry
.1.3.6.1.4.1.9.9.441.1.4.5
csrstSipVoRegPoolEntryInformation about a configured voice register pool for SIP dial-peers. There is an entry in this table for each voice register pool configured on this device.
CsrstSipVoRegPoolEntry
.1.3.6.1.4.1.9.9.441.1.4.5.1
csrstSipVoRegPoolTagA unique identifier tag configured for a voice register pool entry.
Unsigned32
.1.3.6.1.4.1.9.9.441.1.4.5.1.1
csrstSipNetIdThis object indicates the network ident- ification information of the SIP voice register pool configured on this router. This object can be the network Id, IP address, or MAC address.ro
SnmpAdminString
.1.3.6.1.4.1.9.9.441.1.4.5.1.2
csrstSipVoRegPoolIpAddrTypeInternet address type governing the address type format for one or more InetAddress objects in this MIB. The associated InetAddress objects' description will refer back to this type object as appropriate.ro
InetAddressType (INET-ADDRESS-MIB)
.1.3.6.1.4.1.9.9.441.1.4.5.1.3
csrstSipNetMaskThis object indicates the IP subnet configured for the SIP voice register pool. The type of IP subnet used here is indicated by the csrstSipVoRegPoolIpAddrType object.ro
InetAddress (INET-ADDRESS-MIB)
.1.3.6.1.4.1.9.9.441.1.4.5.1.4
csrstSipProxySrvIpAddrThis object indicates the IP address of the proxy server configured for the SIP voice register pool. The type of IP address used here is indicated by the csrstSipVoRegPoolIpAddrType object.ro
InetAddress (INET-ADDRESS-MIB)
.1.3.6.1.4.1.9.9.441.1.4.5.1.5
csrstSipProxySrvPrefThis object indicates the preference order for creating the VoIP dial peers in the voice register pool. Setting the preference enables the desired dial peer to be selected when multiple dial peers within a hunt group are matched for a dial string. A value of 0 has the highest preference.ro
Unsigned32
.1.3.6.1.4.1.9.9.441.1.4.5.1.6
csrstSipProxySrvMonitorCisco SIP SRST monitoring protocol of the proxy server configured for the SIP voice register pool. This monitoring protocol can be ICMP ping or RTR probes.ro
Enumeration
.1.3.6.1.4.1.9.9.441.1.4.5.1.7
csrstSipProxySrvAltIpAddrCisco SIP SRST monitoring of an alternate IP address other than the proxy configured for the SIP voice register pool. The type of IP address used here is indicated by the csrstSipVoRegPoolIpAddrType object.ro
InetAddress (INET-ADDRESS-MIB)
.1.3.6.1.4.1.9.9.441.1.4.5.1.8
csrstSipDefaultPreferenceThis object indicates the default preference of the proxy dial-peers created in the voice register pool. If csrstSipProxySrvPref object is not set, the default preference is applied to the dial-peers created. A value of 0 has the highest preference.ro
Unsigned32
.1.3.6.1.4.1.9.9.441.1.4.5.1.9
csrstSipVoRegPoolApplApplication for the SIP dial-peers configured under voice register pool.ro
SnmpAdminString
.1.3.6.1.4.1.9.9.441.1.4.5.1.10
csrstSipVoRegNumberListTableThis table contains information about the configured number list for the corresponding voice register pool on this SIP SRST router.
SEQUENCE OF CsrstSipVoRegNumberListEntry
.1.3.6.1.4.1.9.9.441.1.4.6
csrstSipVoRegNumberListEntryInformation about a configured number list for the corresponding voice register pool. There is an entry in this table for each number list configured on this device.
CsrstSipVoRegNumberListEntry
.1.3.6.1.4.1.9.9.441.1.4.6.1
csrstSipVoRegNumberListIndexA unique sequence number that indicates a number list configured for the corresponding voice register pool on this SRST router.
Unsigned32
.1.3.6.1.4.1.9.9.441.1.4.6.1.1
csrstSipVoRegNumberListTagThis object indicates the particular index of the number list configured for the corresponding voice register pool.ro
Unsigned32
.1.3.6.1.4.1.9.9.441.1.4.6.1.2
csrstSipVoRegNumberPatternThis object indicates the number pattern that the registrar permits to handle the register message from the SIP phone. This number pattern is a fully qualified E.164 number.ro
CvE164Address
.1.3.6.1.4.1.9.9.441.1.4.6.1.3
csrstSipVoRegNumberPrefThis object indicates the preference of the number pattern configured for the corresponding voice register pool.ro
Unsigned32
.1.3.6.1.4.1.9.9.441.1.4.6.1.4
csrstSipVoRegNumberHuntstopEnabledThis object indicates huntstop is enabled (true) or disabled (false) for the number pattern configured for the corresponding voice register pool. If enabled, the incoming call will stop hunting if the dial-peer is busy. If disabled, the incoming call will hunt further for dial-peers.ro
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.9.9.441.1.4.6.1.5
csrstSipEndpointTableThis table contains general information about the configured SIP dial-peers (endpoints) on this SIP SRST router.
SEQUENCE OF CsrstSipEndpointEntry
.1.3.6.1.4.1.9.9.441.1.4.7
csrstSipEndpointEntryInformation about a created SIP endpoint. There is an entry in this table for each SIP endpoint (dial-peer) configured on this device.
CsrstSipEndpointEntry
.1.3.6.1.4.1.9.9.441.1.4.7.1
csrstSipEndpointTagA unique sequence number that indicates a SIP endpoint configured on this SRST router.
Unsigned32
.1.3.6.1.4.1.9.9.441.1.4.7.1.1
csrstSipVoRegPoolEdptTagThis object indicates the voice register pool tag from which the corresponding SIP endpoint (dial-peer) is created.ro
Unsigned32
.1.3.6.1.4.1.9.9.441.1.4.7.1.2
csrstSipEndpointIpAddrTypeInternet address type governing the address type format for one or more InetAddress objects in this MIB. The associated InetAddress objects' description will refer back to this type object as appropriate.ro
InetAddressType (INET-ADDRESS-MIB)
.1.3.6.1.4.1.9.9.441.1.4.7.1.3
csrstSipEndpointIpAddressThis object indicates the SIP endpoint IP address configured on this router. The type of IP address used here is indicated by the csrstSipEndpointIpAddrType object.ro
InetAddress (INET-ADDRESS-MIB)
.1.3.6.1.4.1.9.9.441.1.4.7.1.4
csrstSipEndpointDNThis object indicates the SIP phone's DN or line number assigned to the SIP endpoint.ro
CvE164Address
.1.3.6.1.4.1.9.9.441.1.4.7.1.5
ciscoSrstMIBConformance
OBJECT IDENTIFIER
.1.3.6.1.4.1.9.9.441.2
ciscoSrstMIBCompliances
OBJECT IDENTIFIER
.1.3.6.1.4.1.9.9.441.2.1
ciscoSrstMIBGroups
OBJECT IDENTIFIER
.1.3.6.1.4.1.9.9.441.2.2
csrstSysNotifSeverityThe internally-defined severity of the particular alarm condition, associated with the most recent SNMP notification. A subsequent event in which the alarm condition changes from its failed state back to a 'normal' state has a severity of 'clear'. This severity-level value is supplied with each SRST specific notification.ro
Enumeration
.csrstNotifInfoGroup.1
csrstSysNotifReasonThe internally-defined failure cause of the particular alarm condition, associated with the most recent system notification.ro
SnmpAdminString
.csrstNotifInfoGroup.2
CISCO-SRST-MIB - SNMP MIB Reference | MIBs Explorer