CISCO-SP-MIB
The CISCO-SP-MIB enables SNMP-based management of SS7 Signalling Point instances on Cisco IOS devices with SS7 offload hardware, monitoring point code configurations, linkset and link states, and detailed byte/packet statistics for accounting and violation tracking.
Imported Objects
Objects
399 total| Object Name |
|---|
ciscoSpMIB MODULE-IDENTITY .1.3.6.1.4.1.9.10.73 |
ciscoSpMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.9.10.73.1 |
cSpScalars OBJECT IDENTIFIER .1.3.6.1.4.1.9.10.73.1.1 |
cSpSs7Variantro CSpSs7Variant .1.3.6.1.4.1.9.10.73.1.1.1 |
cSpPointCodero CSpPointCode .1.3.6.1.4.1.9.10.73.1.1.2 |
cSpMtp2T01ro Unsigned32 UNITS "milli-seconds" .1.3.6.1.4.1.9.10.73.1.1.3 |
cSpMtp2T02ro Unsigned32 UNITS "100 milli-seconds" .1.3.6.1.4.1.9.10.73.1.1.4 |
cSpMtp2T03ro Unsigned32 UNITS "milli-seconds" .1.3.6.1.4.1.9.10.73.1.1.5 |
cSpMtp2T4Nro Unsigned32 UNITS "milli-seconds" .1.3.6.1.4.1.9.10.73.1.1.6 |
cSpMtp2T4Ero Unsigned32 UNITS "milli-seconds" .1.3.6.1.4.1.9.10.73.1.1.7 |
cSpMtp2T05ro Unsigned32 UNITS "milli-seconds" .1.3.6.1.4.1.9.10.73.1.1.8 |
cSpMtp2T06ro Unsigned32 UNITS "milli-seconds." .1.3.6.1.4.1.9.10.73.1.1.9 |
cSpMtp2T07ro Unsigned32 UNITS "milli-seconds." .1.3.6.1.4.1.9.10.73.1.1.10 |
cSpMtp2T08ro Unsigned32 .1.3.6.1.4.1.9.10.73.1.1.11 |
cSpMtp3T01ro Unsigned32 .1.3.6.1.4.1.9.10.73.1.1.12 |
cSpMtp3T02ro Unsigned32 .1.3.6.1.4.1.9.10.73.1.1.13 |
cSpMtp3T03ro Unsigned32 .1.3.6.1.4.1.9.10.73.1.1.14 |
cSpMtp3T04ro Unsigned32 .1.3.6.1.4.1.9.10.73.1.1.15 |
cSpMtp3T05ro Unsigned32 .1.3.6.1.4.1.9.10.73.1.1.16 |
cSpMtp3T06ro Unsigned32 .1.3.6.1.4.1.9.10.73.1.1.17 |
cSpMtp3T07ro Unsigned32 .1.3.6.1.4.1.9.10.73.1.1.18 |
cSpMtp3T08ro Unsigned32 .1.3.6.1.4.1.9.10.73.1.1.19 |
cSpMtp3T10ro Unsigned32 .1.3.6.1.4.1.9.10.73.1.1.20 |
cSpMtp3T11ro Unsigned32 .1.3.6.1.4.1.9.10.73.1.1.21 |
cSpMtp3T12ro Unsigned32 .1.3.6.1.4.1.9.10.73.1.1.22 |
cSpMtp3T13ro Unsigned32 .1.3.6.1.4.1.9.10.73.1.1.23 |
cSpMtp3T14ro Unsigned32 .1.3.6.1.4.1.9.10.73.1.1.24 |
cSpMtp3T15ro Unsigned32 .1.3.6.1.4.1.9.10.73.1.1.25 |
cSpMtp3T16ro Unsigned32 .1.3.6.1.4.1.9.10.73.1.1.26 |
cSpMtp3T17ro Unsigned32 .1.3.6.1.4.1.9.10.73.1.1.27 |
cSpMtp3T18ro Unsigned32 .1.3.6.1.4.1.9.10.73.1.1.28 |
cSpMtp3T19ro Unsigned32 .1.3.6.1.4.1.9.10.73.1.1.29 |
cSpMtp3T20ro Unsigned32 .1.3.6.1.4.1.9.10.73.1.1.30 |
cSpMtp3T21ro Unsigned32 .1.3.6.1.4.1.9.10.73.1.1.31 |
cSpMtp3T22ro Unsigned32 .1.3.6.1.4.1.9.10.73.1.1.32 |
cSpMtp3T23ro Unsigned32 .1.3.6.1.4.1.9.10.73.1.1.33 |
cSpMtp3T24ro Unsigned32 .1.3.6.1.4.1.9.10.73.1.1.34 |
cSpMtp3T25ro Unsigned32 UNITS "seconds." .1.3.6.1.4.1.9.10.73.1.1.35 |
cSpMtp3T26ro Unsigned32 UNITS "seconds." .1.3.6.1.4.1.9.10.73.1.1.36 |
cSpMtp3T27ro Unsigned32 UNITS "seconds." .1.3.6.1.4.1.9.10.73.1.1.37 |
cSpMtp3T28ro Unsigned32 UNITS "seconds." .1.3.6.1.4.1.9.10.73.1.1.38 |
cSpMtp3T29ro Unsigned32 UNITS "seconds." .1.3.6.1.4.1.9.10.73.1.1.39 |
cSpMtp3T30ro Unsigned32 UNITS "seconds." .1.3.6.1.4.1.9.10.73.1.1.40 |
cSpMtp3T31ro Unsigned32 UNITS "seconds." .1.3.6.1.4.1.9.10.73.1.1.41 |
cSpMtp3T32ro Unsigned32 UNITS "seconds." .1.3.6.1.4.1.9.10.73.1.1.42 |
cSpMtp3T33ro Unsigned32 UNITS "seconds." .1.3.6.1.4.1.9.10.73.1.1.43 |
cSpMtp3T34ro Unsigned32 UNITS "seconds." .1.3.6.1.4.1.9.10.73.1.1.44 |
cSpLinkset OBJECT IDENTIFIER .1.3.6.1.4.1.9.10.73.1.2 |
cSpLinksetTable SEQUENCE OF CSpLinksetTableEntry .1.3.6.1.4.1.9.10.73.1.2.1 |
cSpLinksetTableEntry CSpLinksetTableEntry .1.3.6.1.4.1.9.10.73.1.2.1.1 |
cSpLinksetName CSpLinksetId .1.3.6.1.4.1.9.10.73.1.2.1.1.1 |
cSpLinksetAdjacentPointCodero CSpPointCode .1.3.6.1.4.1.9.10.73.1.2.1.1.2 |
cSpLinksetStatero CSpOsiState .1.3.6.1.4.1.9.10.73.1.2.1.1.3 |
cSpLinksetInboundAclro CSpAclId .1.3.6.1.4.1.9.10.73.1.2.1.1.4 |
cSpLinksetOutboundAclro CSpAclId .1.3.6.1.4.1.9.10.73.1.2.1.1.5 |
cSpLinksetSnmmRouteTableNamero CSpRouteTableName .1.3.6.1.4.1.9.10.73.1.2.1.1.6 |
cSpLinksetSntmRouteTableNamero CSpRouteTableName .1.3.6.1.4.1.9.10.73.1.2.1.1.7 |
cSpLinksetSpare2RouteTableNamero CSpRouteTableName .1.3.6.1.4.1.9.10.73.1.2.1.1.8 |
cSpLinksetSccpRouteTableNamero CSpRouteTableName .1.3.6.1.4.1.9.10.73.1.2.1.1.9 |
cSpLinksetTupRouteTableNamero CSpRouteTableName .1.3.6.1.4.1.9.10.73.1.2.1.1.10 |
cSpLinksetIsupRouteTableNamero CSpRouteTableName .1.3.6.1.4.1.9.10.73.1.2.1.1.11 |
cSpLinksetDupcRouteTableNamero CSpRouteTableName .1.3.6.1.4.1.9.10.73.1.2.1.1.12 |
cSpLinksetDupfRouteTableNamero CSpRouteTableName .1.3.6.1.4.1.9.10.73.1.2.1.1.13 |
cSpLinksetMtupRouteTableNamero CSpRouteTableName .1.3.6.1.4.1.9.10.73.1.2.1.1.14 |
cSpLinksetBisupRouteTableNamero CSpRouteTableName .1.3.6.1.4.1.9.10.73.1.2.1.1.15 |
cSpLinksetSisupRouteTableNamero CSpRouteTableName .1.3.6.1.4.1.9.10.73.1.2.1.1.16 |
cSpLinksetSpare11RouteTableNamero CSpRouteTableName .1.3.6.1.4.1.9.10.73.1.2.1.1.17 |
cSpLinksetSpare12RouteTableNamero CSpRouteTableName .1.3.6.1.4.1.9.10.73.1.2.1.1.18 |
cSpLinksetSpare13RouteTableNamero CSpRouteTableName .1.3.6.1.4.1.9.10.73.1.2.1.1.19 |
cSpLinksetSpare14RouteTableNamero CSpRouteTableName .1.3.6.1.4.1.9.10.73.1.2.1.1.20 |
cSpLinksetSpare15RouteTableNamero CSpRouteTableName .1.3.6.1.4.1.9.10.73.1.2.1.1.21 |
cSpLinksetAccountingEnabledro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.10.73.1.2.1.1.22 |
cSpLinksetNumLinksro Unsigned32 .1.3.6.1.4.1.9.10.73.1.2.1.1.23 |
cSpLinksetPacketsSentro Counter32 UNITS "packets" .1.3.6.1.4.1.9.10.73.1.2.1.1.24 |
cSpLinksetHCPacketsSentro Counter64 UNITS "packets" .1.3.6.1.4.1.9.10.73.1.2.1.1.25 |
cSpLinksetPacketsRcvdro Counter32 UNITS "packets" .1.3.6.1.4.1.9.10.73.1.2.1.1.26 |
cSpLinksetHCPacketsRcvdro Counter64 UNITS "packets" .1.3.6.1.4.1.9.10.73.1.2.1.1.27 |
cSpLinksetBytesSentro Counter32 UNITS "bytes" .1.3.6.1.4.1.9.10.73.1.2.1.1.28 |
cSpLinksetHCBytesSentro Counter64 UNITS "bytes" .1.3.6.1.4.1.9.10.73.1.2.1.1.29 |
cSpLinksetBytesRcvdro Counter32 UNITS "bytes" .1.3.6.1.4.1.9.10.73.1.2.1.1.30 |
cSpLinksetHCBytesRcvdro Counter64 UNITS "bytes" .1.3.6.1.4.1.9.10.73.1.2.1.1.31 |
cSpLinksetDurationInServicero TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.9.10.73.1.2.1.1.32 |
cSpLinksetDurationOutServicero TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.9.10.73.1.2.1.1.33 |
cSpLinksetMtp2T01ro Unsigned32 UNITS "100 milli-seconds" .1.3.6.1.4.1.9.10.73.1.2.1.1.34 |
cSpLinksetMtp2T02ro Unsigned32 UNITS "100 milli-seconds" .1.3.6.1.4.1.9.10.73.1.2.1.1.35 |
cSpLinksetMtp2T03ro Unsigned32 UNITS "100 milli-seconds" .1.3.6.1.4.1.9.10.73.1.2.1.1.36 |
cSpLinksetMtp2T4Nro Unsigned32 UNITS "100 milli-seconds" .1.3.6.1.4.1.9.10.73.1.2.1.1.37 |
cSpLinksetMtp2T4Ero Unsigned32 UNITS "100 milli-seconds" .1.3.6.1.4.1.9.10.73.1.2.1.1.38 |
cSpLinksetMtp2T05ro Unsigned32 UNITS "milli-seconds" .1.3.6.1.4.1.9.10.73.1.2.1.1.39 |
cSpLinksetMtp2T06ro Unsigned32 UNITS "100 milli-seconds." .1.3.6.1.4.1.9.10.73.1.2.1.1.40 |
cSpLinksetMtp2T07ro Unsigned32 UNITS "100 milli-seconds." .1.3.6.1.4.1.9.10.73.1.2.1.1.41 |
cSpLinksetMtp2T08ro Unsigned32 .1.3.6.1.4.1.9.10.73.1.2.1.1.42 |
cSpLinksetMtp3T01ro Unsigned32 .1.3.6.1.4.1.9.10.73.1.2.1.1.43 |
cSpLinksetMtp3T02ro Unsigned32 .1.3.6.1.4.1.9.10.73.1.2.1.1.44 |
cSpLinksetMtp3T03ro Unsigned32 .1.3.6.1.4.1.9.10.73.1.2.1.1.45 |
cSpLinksetMtp3T04ro Unsigned32 .1.3.6.1.4.1.9.10.73.1.2.1.1.46 |
cSpLinksetMtp3T05ro Unsigned32 .1.3.6.1.4.1.9.10.73.1.2.1.1.47 |
cSpLinksetMtp3T06ro Unsigned32 .1.3.6.1.4.1.9.10.73.1.2.1.1.48 |
cSpLinksetMtp3T07ro Unsigned32 .1.3.6.1.4.1.9.10.73.1.2.1.1.49 |
cSpLinksetMtp3T08ro Unsigned32 .1.3.6.1.4.1.9.10.73.1.2.1.1.50 |
CISCO-SP-MIB Technical Reference Overview
The CISCO-SP-MIB SNMP MIB module published by Cisco defines 399 managed OID objects, including 373 scalar/column metrics, 5 SNMP tables, and 2 trap/notification events anchored at base OID .1.3.6.1.4.1.9.10.73. Key tabular structures include cSpLinksetTable, cSpLinkTable, cSpRouteTable, cSpAclTable, cSpAccountingTable. Monitored SNMP traps/notifications include ciscoSpLinksetStateChange, ciscoSpLinkStateChange.
Key OID Definitions in CISCO-SP-MIB
.1.3.6.1.4.1.9.10.73The MIB for managing the SS7 Signalling Point (SP) implemented in the Cisco IOS SS7 offload product. The relevant ITU documents describing this technology is the ITU Q series, including ITU Q.700: Introduction to CCITT Signalling System No. 7 and ITU Q.701 Functional description of the message transfer part (MTP) of Signalling System No. 7. This MIB models the SP as follows: The SP is associated with one or more point codes. Each pointcode is associated with: an ss7 variant, timers, and linksets. Linksets contain: destination point code linkset byte/packet statistics, accounting information per DPC and OPC violation accounting information per DPC and OPC links, reference to incoming and outgoing ACL reference to a routing table for each SS7 packet type Links contain: timers, and byte/packet statistics. The figure below provides a diagrammatic representation of the relationships. Each box may be replicated providing multiple instances of the object. ' a reference to the object to the right. '###>' indicates that the object to the left contains an instance of the object to the right. The down arrow indicates that the object being pointed to contains snmp indices of the objects above it. ________________ | | | Sp |###> point code, timers |________________| | V ________________ | | | | | Linkset | | | | | |________________| | V ________________ | Link |###> timers |________________|
.1.3.6.1.4.1.9.10.73.1.2.1A table of linksets for this SP.
.1.3.6.1.4.1.9.10.73.1.3.1A table of SP links for this SP.
.1.3.6.1.4.1.9.10.73.1.4.1The route table for determining the linkset that a packet must traverse to arrive at its destination node given by the destination point code.
.1.3.6.1.4.1.9.10.73.1.5.1A table of SP access controls. The access control definition controls which packets are accepted or rejected. The access control may be applied before sending the packet to the routing table or may be applied after the packet is processed by the routing table.
.1.3.6.1.4.1.9.10.73.1.6.1A table of packet and byte counts for packets that match an ACL in the linkset's inbound ACL and in the outbound ACL. These counters are updated no more frequently than the value specified by cSpAccCheckPointPeriod. Polling more frequently than this period results in the same values being returned.
.1.3.6.1.4.1.9.10.73.2.0.1The notification generated when a linkset changes to a new state. The value of cSpLinksetState indicates the new state.
.1.3.6.1.4.1.9.10.73.2.0.2The notification generated when a SP link changes state. The value of cSpLinkState indicates the new state.
.1.3.6.1.4.1.9.10.73.1.1.1The SS7 variant implemented in this SP.
.1.3.6.1.4.1.9.10.73.1.1.2The point code for this SP.
.1.3.6.1.4.1.9.10.73.1.1.3Alignment ready timer. The default and valid range is dependant on the value of cSpSs7Variant. The ranges are defined in the following references.
.1.3.6.1.4.1.9.10.73.1.1.4Not aligned timer. The default and valid range is dependant on the value of cSpSs7Variant. The ranges are defined in the following references. This timer is only applicable if cSpLinkType is serial. A get on this object will return a zero if cSpLinkType is not serial.
.1.3.6.1.4.1.9.10.73.1.1.5Aligned timer. The default and valid range is dependant on the value of cSpSs7Variant. The ranges are defined in the following references.
.1.3.6.1.4.1.9.10.73.1.1.6Proving period timer normal timer. The default and valid range is dependant on the value of cSpSs7Variant. The ranges are defined in the following references.
.1.3.6.1.4.1.9.10.73.1.1.7Proving period timer emergency timer. The default and valid range is dependant on the value of cSpSs7Variant. The ranges are defined in the following references.
.1.3.6.1.4.1.9.10.73.1.1.8Sending SIB timer. The default and valid range is dependant on the value of cSpSs7Variant. The ranges are defined in the following references.
.1.3.6.1.4.1.9.10.73.1.1.9Remote congestion timer. The default and valid range is dependant on the value of cSpSs7Variant. The ranges are defined in the following references.
.1.3.6.1.4.1.9.10.73.1.1.10Excessive delay of acknowledgement timer. The default and valid range is dependant on the value of cSpSs7Variant. The ranges are defined in the following references.
.1.3.6.1.4.1.9.10.73.1.1.11Interval timer for error interval monitor.
.1.3.6.1.4.1.9.10.73.1.1.12Delay to avoid message mis-sequencing on changeover.
.1.3.6.1.4.1.9.10.73.1.1.13Waiting for changeover acknowledgement.
.1.3.6.1.4.1.9.10.73.1.1.14Time controlled diversion-delay to avoid mis-sequencing on change back.
.1.3.6.1.4.1.9.10.73.1.1.15Waiting for change back acknowledgement (first attempt).
.1.3.6.1.4.1.9.10.73.1.1.16Waiting for change back acknowledgement (second attempt).
More MIBs from Cisco
Browse all CiscoMIBs →The CISCO-UNIFIED-COMPUTING-COMPUTE-MIB provides SNMP-based monitoring and management of Cisco UCS compute blades, servers, and chassis components, exposing critical metrics such as CPU utilization, memory usage, thermal sensor readings, power supply status, and interface operational states. This module enables granular visibility into the health and performance of the Cisco Unified Computing System's compute subsystems for capacity planning and fault isolation.
The CISCO-UNIFIED-COMPUTING-STORAGE-MIB facilitates SNMP-based monitoring and management of storage subsystems, including Fibre Channel and iSCSI interfaces, within the Cisco Unified Computing System (UCS) fabric interconnects and blade servers. It exposes critical operational metrics such as port status, error counters, throughput statistics, and storage controller health states to enable granular visibility into the storage infrastructure.
The CISCO-UNIFIED-COMPUTING-VNIC-MIB enables SNMP-based monitoring and management of Virtual Network Interface Card (vNIC) attributes, including operational status, traffic counters, and binding configurations, within the Cisco Unified Computing System (UCS) fabric interconnects and server blades.
SNMP MIB module
The CISCO-UNIFIED-COMPUTING-BIOS-MIB enables SNMP-based monitoring and configuration of BIOS-level parameters, firmware versions, and hardware initialization states within Cisco Unified Computing System (UCS) servers. It provides visibility into critical server boot diagnostics, BIOS settings, and hardware readiness indicators to facilitate low-level infrastructure management and troubleshooting.
The CISCO-UNIFIED-COMPUTING-ETHER-MIB provides SNMP management interfaces for monitoring Ethernet interface statistics, link states, and error counters on Cisco Unified Computing System (UCS) fabric interconnects and blade server line cards. This module enables the tracking of physical layer connectivity, port throughput, and packet error rates within the UCS Ethernet switching infrastructure.