CISCO-SIBU-STACKABLE-DUAL-SPEED-HUB-MIB
AI MIB Summary
The CISCO-SIBU-STACKABLE-DUAL-SPEED-HUB-MIB extends the REPEATER-MIB to monitor stackable dual-speed hub repeater groups and their interconnections via stack bus connectors on legacy Cisco low-end hardware. It facilitates the tracking of port status, collision counts, and stack topology states for these specific legacy switching devices.
The MIB module that extends the REPEATER-MIB to manage CISCO low end stackable repeater products. For the purpose of this mib, a hub is a repeater group and stack is collection of one or more hubs interconnected via stack bus connectors.
54
Objects
Active
Status
7
Dependencies
Imported Objects
Objects
54 total| Object Name |
|---|
ciscoSibuStackableDualSpeedHubMIB OBJECT IDENTIFIER .1.3.6.1.4.1.9.10.44 |
SNMPv2-SMI-v1 Unknown .1.3.6.1.4.1.9.10.44 |
ciscoSibuStackableDualSpeedHubMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.9.10.44.1 |
cssSystem OBJECT IDENTIFIER .1.3.6.1.4.1.9.10.44.1.1 |
cssSystemLinkTrapsIndicates whether the stack is permitted to generate
linkUp/linkDown traps for both repeater port and
switch module's port. The stack provides only
a single global control of link traps in contrast
to per interface control provided by IF-MIB. The
value of all instances ifLinkUpDownTrapEnable is set
to TRUE (FALSE) if this object is set to enabled
(disabled). The object ifLinkUpDownTrapEnable is
read-only.
A linkUp/linkDown trap is generated whenever a port's
link STATUS or administrative status changes.rw Enumeration .1.3.6.1.4.1.9.10.44.1.1.1 |
cssGroup OBJECT IDENTIFIER .1.3.6.1.4.1.9.10.44.1.2 |
cssGroupTableA list of member hubs in the stack. SEQUENCE OF CssGroupEntry .1.3.6.1.4.1.9.10.44.1.2.1 |
cssGroupEntryConfiguration parameters for an individual hub.
An entry is created by default for the master unit
in the stack. A entry is created (removed) when
a hub is connected to (removed from) the stack. CssGroupEntry .1.3.6.1.4.1.9.10.44.1.2.1.1 |
cssGroupIDThe hub identifier of unit in a stack.ro HubNumber -- Rsyntax Integer32 .1.3.6.1.4.1.9.10.44.1.2.1.1.1 |
cssGroupTypeThe model type of the hub unitro Enumeration .1.3.6.1.4.1.9.10.44.1.2.1.1.2 |
cssGroupSerialNoSerial number of the hardware.ro DisplayString .1.3.6.1.4.1.9.10.44.1.2.1.1.4 |
cssGroupBoardRevisionHardware version of the repeater board.ro Integer32 .1.3.6.1.4.1.9.10.44.1.2.1.1.5 |
cssGroupAgentBootVersionReturns the version number of the dual-speed hub
BOOT software residing in flash. The format is 'V1.2.3'.ro DisplayString .1.3.6.1.4.1.9.10.44.1.2.1.1.6 |
cssGroupAgentFirmwareVersionReturns the version number of the dual-speed hub
firmware residing in flash. The format is 'V1.2.3'.ro DisplayString .1.3.6.1.4.1.9.10.44.1.2.1.1.7 |
cssGroupAgentStatusStatus of this hub agent. Each stack allows only
one SNMP primary agent.
notPresent(1): The hub does not have an agent.
primary(2): The agent of this hub is a primary agent.
backup(3) : The agent of this hub is a backup agent.ro Enumeration .1.3.6.1.4.1.9.10.44.1.2.1.1.8 |
cssGroupAgentPhysAddressMAC address of this hub's agentro PhysAddress -- Rsyntax OCTET STRING .1.3.6.1.4.1.9.10.44.1.2.1.1.9 |
cssGroupInternalPowerStateIndicates the state of the internal power supply.
off : The internal power supply is off.
on : The internal power supply is on.ro Enumeration .1.3.6.1.4.1.9.10.44.1.2.1.1.12 |
cssGroupRedundantPowerStateIndicates the state of the external/backup power
supply.
off : the switch is not connected to a redundant
power source.
healthy : a redundant power source is connected to
the switch and the power source is
operating correctly.
faulty : a redundant power source is connected to
the switch but a failure exists in the
power system.ro Enumeration .1.3.6.1.4.1.9.10.44.1.2.1.1.13 |
cssGroupResetSetting this object to reset(2) causes a complete
reset of both hardware and software, but does not run
the POST (Power On Self Test).
Setting this object to noReset(1) has no effect.
The switch always returns the value noReset(1) when
this object is read.rw Enumeration .1.3.6.1.4.1.9.10.44.1.2.1.1.14 |
cssGroupConfigDefaultResetSetting this object to reset(2) causes a complete
reset of both hardware and software, but does not
run the POST (Power On Self Test). All
configuration parameters will revert to their
factory default settings.
Setting this object to noReset(1) has no effect.
The switch always returns the value noReset(1) when
this object is read.rw Enumeration .1.3.6.1.4.1.9.10.44.1.2.1.1.15 |
cssGroupIsolatedStateSetting this object to isolated(1) causes this hub
to be isolated from the back plane bus. Setting
this object to attached(2) causes this hub to be
attached to the back plane bus.rw Enumeration .1.3.6.1.4.1.9.10.44.1.2.1.1.16 |
cssRepeaterPort OBJECT IDENTIFIER .1.3.6.1.4.1.9.10.44.1.3 |
cssRepeaterPortTableThe list of repeater port configurations on each hub
unit. SEQUENCE OF CssRepeaterPortEntry .1.3.6.1.4.1.9.10.44.1.3.1 |
cssRepeaterPortEntryConfiguration parameters for an individual repeater
port on a hub. The value of rptrPortIndex also
indicates the physical port number of the port in
the hub. An entry is created for each repeater port in
a hub when the hub is connected to the stack. The
corresponding entries are removed when the hub is
removed from the stack. CssRepeaterPortEntry .1.3.6.1.4.1.9.10.44.1.3.1.1 |
cssRepeaterPortNameA descriptive string of up to 20 characters used
by the network administrator to name a port.rw DisplayString .1.3.6.1.4.1.9.10.44.1.3.1.1.1 |
cssRepeaterPortControllerRevisionReturns the revision number of the port controller.ro Integer32 .1.3.6.1.4.1.9.10.44.1.3.1.1.2 |
cssRepeaterPortSpeedAdminSet to tenMbps(1) to operate in 10Mbps speed mode.
Set to oneHundredMbps(2) to operate in 100Mbps speed
mode. Set to autoNegotiate(3) to allow the switch
to negotiate with the other end of the connection.
The actual operating speed of the port is given by
cssRepeaterPortSpeedStatus.rw Enumeration .1.3.6.1.4.1.9.10.44.1.3.1.1.3 |
cssRepeaterPortSpeedStatusThe operating speed of the port.rw Enumeration .1.3.6.1.4.1.9.10.44.1.3.1.1.4 |
cssRepeaterPortLinkStatusThe current port link status.ro Enumeration .1.3.6.1.4.1.9.10.44.1.3.1.1.5 |
cssSwitchPort OBJECT IDENTIFIER .1.3.6.1.4.1.9.10.44.1.4 |
cssSwitchPortTableA list of switched ports on extension module on a each
hub unit in the stack. SEQUENCE OF CssSwitchPortEntry .1.3.6.1.4.1.9.10.44.1.4.1 |
cssSwitchPortEntryConfiguration parameters for an individual switch
module port. An entry is created for each switch port
on a module is inserted into a hub in the stack.
The corresponding entries are removed when the module
is removed from the hub in the stack, or if the hub
is removed from the stack. CssSwitchPortEntry .1.3.6.1.4.1.9.10.44.1.4.1.1 |
cssSwitchPortModuleIDUnique ID number of a module unit in a hub as used
in the command line interface.ro Integer32 .1.3.6.1.4.1.9.10.44.1.4.1.1.1 |
cssSwitchPortPortIDThe unique ID identifying a port on an extension module
on a hub as used in the command line interface.ro Integer32 .1.3.6.1.4.1.9.10.44.1.4.1.1.2 |
cssSwitchPortNameA descriptive string of up to 20 characters used by the
network administrator to name a switch port.rw DisplayString .1.3.6.1.4.1.9.10.44.1.4.1.1.3 |
cssSwitchPortTypeType of switch module in this hub.ro Enumeration .1.3.6.1.4.1.9.10.44.1.4.1.1.4 |
cssSwitchPortControllerRevisionThe revision number of the port controller.ro Integer32 .1.3.6.1.4.1.9.10.44.1.4.1.1.5 |
cssSwitchPortStateSetting this object to enabled(1) enables the port.
Setting this object to disabled(2) disables the port.rw Enumeration .1.3.6.1.4.1.9.10.44.1.4.1.1.6 |
cssSwitchPortDuplexAdminSet to fullDuplex(1) to operate in full duplex mode: port
will allow simultaneous transmit and receive which can
double its bandwidth. Set to halfDuplex(2) to operate in
normal mode. Set to autoNegotiate(3) to allow the switch
to negotiate the duplex status with the other end of the
connection.rw Enumeration .1.3.6.1.4.1.9.10.44.1.4.1.1.7 |
cssSwitchPortDuplexStatusThe operating duplex mode of the switched port.ro Enumeration .1.3.6.1.4.1.9.10.44.1.4.1.1.8 |
cssSwitchPortSpeedAdminSet to tenMbps(1) to operate in 10Mbps speed mode. Set to
oneHundredMbps(2) to operate in 100Mbps speed mode. Set to
autoNegotiate(3) to allow the switch to negotiate the operating
speed with the other end of the connection.
If the value of object cssSwitchPortType is WS-X4002(2),
this object will be read-only, because FX module only
supports 100Mbps speed.rw Enumeration .1.3.6.1.4.1.9.10.44.1.4.1.1.9 |
cssSwitchPortSpeedStatusThe operating speed of the switched port.ro Enumeration .1.3.6.1.4.1.9.10.44.1.4.1.1.10 |
cssSwitchPortLinkStatusIndicates the link STATUS of switch port.ro Enumeration .1.3.6.1.4.1.9.10.44.1.4.1.1.11 |
ciscoSibuStackableDualSpeedHubNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.9.10.44.2 |
ciscoSibuStackableDualSpeedHubNotificationsPrefix OBJECT IDENTIFIER .1.3.6.1.4.1.9.10.44.2.0 |
ciscoSibuStackableDualSpeedHubRptrPortLinkChangeThis trap is generated whenever the value of
cssRepeaterPortLinkStatus changes for a repeater port. TRAP-TYPE .1.3.6.1.4.1.9.10.44.2.0.1 |
ciscoSibuStackableDualSpeedHubSwitchPortLinkChangeThis trap is generated whenever the value of
cssSwitchPortLinkStatus changes for a switch port
on an extension module. TRAP-TYPE .1.3.6.1.4.1.9.10.44.2.0.2 |
ciscoSibuStackableDualSpeedHubMIBComformance OBJECT IDENTIFIER .1.3.6.1.4.1.9.10.44.3 |
ciscoSibuStackableDualSpeedHubMIBCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.9.10.44.3.1 |
ciscoSibuStackableDualSpeedHubCompliance OBJECT IDENTIFIER .1.3.6.1.4.1.9.10.44.3.1.1 |
ciscoSibuStackableDualSpeedHubMIBGroups OBJECT IDENTIFIER .1.3.6.1.4.1.9.10.44.3.2 |
ciscoSibuStackableDualSpeedHubGroup OBJECT IDENTIFIER .1.3.6.1.4.1.9.10.44.3.2.1 |
ciscoSibuStackableDualSpeedHubRepeaterPortGroup OBJECT IDENTIFIER .1.3.6.1.4.1.9.10.44.3.2.2 |
ciscoSibuStackableDualSpeedHubSwitchPortGroup OBJECT IDENTIFIER .1.3.6.1.4.1.9.10.44.3.2.3 |