CISCO-SIBU-MANAGERS-MIB
The CISCO-SIBU-MANAGERS-MIB configures and monitors the management interface parameters for Cisco SIBU (Secure Internet Business Unit) devices, specifically defining the operational state and configuration of remote management sessions. This module enables the administration of access control and connectivity settings for the device's out-of-band management ports.
Imported Objects
Objects
30 total| Object Name |
|---|
ciscoSibuManagersMIBThe MIB module that provides a simple configuration
of management interfaces on managed devices. MODULE-IDENTITY .1.3.6.1.4.1.9.10.46 |
ciscoSibuManagersMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.9.10.46.1 |
cmIpConfig OBJECT IDENTIFIER .1.3.6.1.4.1.9.10.46.1.1 |
cmIpConfigMethodIndicates the management IP address is got from user
configuration or from Bootp. The default value is 1.
This value of this object determines how the device
obtains its IP address. If set to manual(1), the ip
address is the value configured by the user by setting
the value of ipConfigIpAddress.
If set to bootp(2), the IP address is obtained
via the BootStrap Protocol (BOOTP).rw Enumeration .1.3.6.1.4.1.9.10.46.1.1.1 |
cmIpConfigAddressThe device's administrative IP address. The device may
automatically discover a value for this object using the
BootStrap protocol (BOOTP). The object value is also
duplicated in the MIB-II ipAddrTable.
This object is writable only if the value of
ipConfigMethod is set to manual(1).
A write to this object will take effect immediately,
replacing the previous address, if any. The default is
0.0.0.0, or no address.rw IpAddress .1.3.6.1.4.1.9.10.46.1.1.2 |
cmIpConfigSubnetMaskThe device's administrative IP subnet mask. The device
may automatically discover a value for this object using
the BootStrap protocol (BOOTP). The object value is also
duplicated in the MIB-II ipAddrTable.
This object is writable only if the value of
ipConfigMethod is set to manual(1).
A write to this value will take effect immediately.
The default value is 0.0.0.0, or no subnet mask.rw IpAddress .1.3.6.1.4.1.9.10.46.1.1.3 |
cmIpConfigDefaultGatewayThe default gateway IP address is the address of the
next hop router the switch uses to reach a non-local IP
host when the switch does not know the return route.
During a normal management protocol exchange with an IP
client host, the switch simply sends its response onto
the same route from which the request was received. The
default gateway route is only used when the switch itself
initiates an exchange, e.g., a TFTP upgrade, with the
client.
This object is writable only if the value of
ipConfigMethod is set to manual(1).
A write to this object will take effect immediately,
replacing the previous address, if any. The default is
0.0.0.0, or no address.rw IpAddress .1.3.6.1.4.1.9.10.46.1.1.4 |
cmConsoleConfig OBJECT IDENTIFIER .1.3.6.1.4.1.9.10.46.1.2 |
cmConsoleCLIInactiveTimeoutThe number of seconds of command line console session
inactivity to wait before ending the session. Once a
session has ended, the user must resupply the cli
console password to regain access. A value of 0
indicates no timeout, and is the default value.rw Integer32 (0 | 30..65500) UNITS "seconds" .1.3.6.1.4.1.9.10.46.1.2.1 |
cmConsoleCLIPasswordMaxAttemptsThe number of consecutive invalid password attempts
allowed before the command line console is shut down
(kept silent) for a configured duration. A zero value
permits unlimited attempts. The default value is 3.rw Integer32 .1.3.6.1.4.1.9.10.46.1.2.2 |
cmConsoleCLISilentTimeThe number of minutes during which the command line
console will be unavailable after repeated failed
attempts to logon. A zero value specifies no silent
time, and is the default value.rw Integer32 .1.3.6.1.4.1.9.10.46.1.2.3 |
cmConsoleWebAdminStateThis variable enables or disables the Web console
interface. The default value is enabled(1). Enabling
the console provides access to management via the
web console.rw Enumeration .1.3.6.1.4.1.9.10.46.1.2.4 |
cmConsoleWebHttpPortThis variable allows the user to configure a specific
port on which the HTTP server for the web console
will listen for TCP connections. Port number 23 is
prohibitted for preventing from disturbing telnet port.rw INTEGER .1.3.6.1.4.1.9.10.46.1.2.5 |
cmSnmpSetManager OBJECT IDENTIFIER .1.3.6.1.4.1.9.10.46.1.3 |
cmSnmpSetManagerTableTable containing a list of IP addresses of workstations
permitted to issue SNMP SET requests. Such a
workstation is called a Set Manager. If this table is
empty then any SET request with a matching SET community
string is allowed. If at least one Set manager is
specified, then an incoming SET request must have its
source IP address matched against an entry in this table
before the SET is allowed. An entry can be created and
deleted via SNMP, command line interface, or web console. SEQUENCE OF CmSnmpSetManagerEntry .1.3.6.1.4.1.9.10.46.1.3.1 |
cmSnmpSetManagerEntryAn IP address of a manager station allowed to issue
SET requests to this management agent. CmSnmpSetManagerEntry .1.3.6.1.4.1.9.10.46.1.3.1.1 |
cmSnmpSetManagerAddrThe SET Manager is assumed to be Internet UDP/IP based.
And this is the manager's IP address. IpAddress .1.3.6.1.4.1.9.10.46.1.3.1.1.1 |
cmSnmpSetManagerRowStatusThe status of this conceptual row. The row can be set
to active, createAndGo, and destroy. On creation,
all objects in an entry must be created in the
same request.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.9.10.46.1.3.1.1.2 |
cmSnmpTrapManager OBJECT IDENTIFIER .1.3.6.1.4.1.9.10.46.1.4 |
cmSnmpTrapManagerTableTable containing a list of Network Management
Stations that are to receive traps generated by this
Network Management Agent. Such an NMS is called a
Trap Manager. An entry can be created and deleted via
SNMP, command line interface or web console. SEQUENCE OF CmSnmpTrapManagerEntry .1.3.6.1.4.1.9.10.46.1.4.1 |
cmSnmpTrapManagerEntryA destination address and community string to a
particular trap manager. CmSnmpTrapManagerEntry .1.3.6.1.4.1.9.10.46.1.4.1.1 |
cmSnmpTrapManagerAddrThe trap manager is assumed to be Internet UDP/IP based.
And this is the manager's IP address. IpAddress .1.3.6.1.4.1.9.10.46.1.4.1.1.1 |
cmSnmpTrapManagerCommunityCommunity string used for traps sent to this trap
manager.rw DisplayString .1.3.6.1.4.1.9.10.46.1.4.1.1.2 |
cmSnmpTrapManagerRowStatusThe status of this conceptual row. The row can be set
to active, createAndGo, and destroy. On creation,
all objects in an entry must be created in the
same request.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.9.10.46.1.4.1.1.3 |
ciscoSibuManagersNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.9.10.46.2 |
ciscoSibuManagersNotificationsPrefix OBJECT IDENTIFIER .1.3.6.1.4.1.9.10.46.2.0 |
ciscoSibuManagersConsoleLogonIntruderA user is repeatedly trying to logon using an invalid
password. The number of attempts exceeds the preset
limit given in consolePasswordMaxAttempts.
Depending on how the object cmConsoleSilentTime is
configured, the switch may shut down the command line
interface console following the generation of this trap. NOTIFICATION-TYPE .1.3.6.1.4.1.9.10.46.2.0.1 |
ciscoSibuManagersMIBComformance OBJECT IDENTIFIER .1.3.6.1.4.1.9.10.46.3 |
ciscoSibuManagersMIBCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.9.10.46.3.1 |
ciscoSibuManagersMIBGroups OBJECT IDENTIFIER .1.3.6.1.4.1.9.10.46.3.2 |
More MIBs from Cisco
Browse all CiscoMIBs →The CISCO-ENTITY-VENDORTYPE-OID-MIB maps Cisco-specific hardware component identifiers to the ENTITY-MIB's entPhysicalTable, enabling precise differentiation of physical device types such as line cards, power supplies, and fans within Cisco infrastructure. This mapping ensures that SNMP management systems can accurately correlate physical inventory entries with vendor-specific component definitions for accurate device discovery and monitoring.
The CISCO-UNIFIED-COMPUTING-EQUIPMENT-MIB provides SNMP-based monitoring and management of Cisco Unified Computing System (UCS) hardware components, including chassis, blades, fabric interconnects, and power supplies. It exposes critical operational metrics such as device status, port states, temperature readings, fan speeds, and power consumption data for infrastructure health assessment.
The CISCO-UNIFIED-COMPUTING-ADAPTOR-MIB enables SNMP-based monitoring and management of physical and virtual network adapter interfaces, including link status, traffic counters, error statistics, and port configuration parameters, within the Cisco Unified Computing System (UCS) fabric interconnects and blade servers.
The CISCO-UNIFIED-COMPUTING-TC-MIB module defines standard textual conventions and data type definitions required for monitoring Cisco Unified Computing System (UCS) hardware components, including server blades, fabric interconnects, and chassis resources. These definitions enable consistent interpretation of specific UCS metrics such as power supply status, fan speeds, thermal readings, and port utilization across SNMP management applications.
The CISCO-UNIFIED-COMPUTING-FABRIC-MIB enables SNMP-based monitoring and management of the Cisco UCS Fabric Interconnects and associated fabric switching infrastructure, exposing metrics for port states, link utilization, error counters, and fabric topology status. It facilitates granular visibility into the physical and logical fabric layers, including uplink/downlink interfaces, VLAN configurations, and fabric failover conditions within the unified computing environment.
The STARENT-MIB module provides SNMP management and monitoring capabilities for Cisco ASR 5000 and ASR 5500 multimedia core platforms, specifically exposing metrics related to 2G/3G/4G and WiFi subscriber sessions, inline service states, and carrier-class high-availability status.