CISCO-SIBU-FLASH-MIB
AI MIB Summary
The CISCO-SIBU-FLASH-MIB enables firmware upgrade operations on Cisco low-end devices by managing flash memory state and image transfer status via SNMP. It provides specific metrics for monitoring the progress, integrity, and availability of software images stored in the device's non-volatile memory.
The MIB module that provides a simple mechanism to support firmware upgrade on Cisco low end devices.
Main OID:
ciscoSibuFlashMIB.1.3.6.1.4.1.9.10.45
15
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
15 total| Object Name |
|---|
ciscoSibuFlashMIBThe MIB module that provides a simple mechanism
to support firmware upgrade on Cisco low end
devices. MODULE-IDENTITY .1.3.6.1.4.1.9.10.45 |
ciscoSibuFlashMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.9.10.45.1 |
csfUpgrade OBJECT IDENTIFIER .1.3.6.1.4.1.9.10.45.1.1 |
csfUpgradeFirmwareVersionReturns the version number of the device system
firmware residing in flash. The string has a
'V1.2.3' format.ro DisplayString .1.3.6.1.4.1.9.10.45.1.1.1 |
csfUpgradeFlashSizeThe size of available FLASH memory in the system,
in kilobytes. For example: 128 equals 131072 bytes
(128 bytes times 1024).ro Integer32 .1.3.6.1.4.1.9.10.45.1.1.2 |
csfUpgradeTFTPServerAddressThe IP address of a TFTP server from which a firmware
image can be downloaded. The download may be initiated
by setting the upgradeTFTPInitiate to upgrade(1), or via
an out-of-band management action.rw IpAddress .1.3.6.1.4.1.9.10.45.1.1.3 |
csfUpgradeTFTPLoadFilenameThe name of the file containing a firmware upgrade
image on the host whose address is given by
upgradeTFTPServerAddress. The default value is
an empty string, or no filename.rw DisplayString .1.3.6.1.4.1.9.10.45.1.1.4 |
csfUpgradeTFTPInitiateSetting this object to noUpgrade(2) results in no
action. When set to upgrade(1), the switch will attempt
to download a firmware upgrade image from the server
whose address is given by upgradeTFTPServerAddress.
The image is found in the file whose name is given by
sibuFlashTFTPLoadFilename. Both
sibuFlashTFTPServerAddress and
sibuFlashTFTPLoadFilename must be non-empty for the
upgrade to proceed.
This object always returns noUpgrade(2) when read.rw Enumeration .1.3.6.1.4.1.9.10.45.1.1.5 |
csfUpgradeFlashModeIndicates whether a newly upgraded firmware version
should write to flash. When this object is temporary(2),
following a successful upgrade the system will switch to
run the new firmware but will not upgrade the new
firmware to flash. That means after a power cycle,
system will run the firmware residing the flash.
When this object is permanent(1), following a successful
firmware upgrade, the flash will be upgraded and the
system will automatically switch to run the new firmware.rw Enumeration .1.3.6.1.4.1.9.10.45.1.1.6 |
csfUpgradeFirmwareStatusStatus of last upgrade attempt via TFTP:
none - no upgrade has ever been attempted since
initialization.
inProgress - an upgrade is in progress.
succeeded - the previous attempt succeeded.
failed - the previous attempt failed.ro Enumeration .1.3.6.1.4.1.9.10.45.1.1.7 |
ciscoSibuFlashMIBNotificationsPrefix OBJECT IDENTIFIER .1.3.6.1.4.1.9.10.45.2 |
ciscoSibuFlashMIBNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.9.10.45.2.0 |
ciscoSibuFlashMIBComformance OBJECT IDENTIFIER .1.3.6.1.4.1.9.10.45.3 |
ciscoSibuFlashMIBCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.9.10.45.3.1 |
ciscoSibuFlashMIBGroups OBJECT IDENTIFIER .1.3.6.1.4.1.9.10.45.3.2 |