CISCO-SESS-BORDER-CTRLR-EVENT-MIB
AI MIB Summary
The CISCO-SESS-BORDER-CTRLR-EVENT-MIB defines SNMP notifications for Cisco Session Border Controllers to monitor critical VoIP infrastructure states, including SIP/H.248 call establishment, source IP blacklisting, service card status transitions, and resource congestion thresholds. This module enables the detection of security violations, Service Level Agreement (SLA) breaches, and the attachment or detachment of external dependencies such as RADIUS servers, H.248 controllers, and network adjacencies.
The main purpose of this MIB is to define the SNMP notifications and alarms generated by Session Border Controller application and used to send these notifications to SNMP manager application. Each of these event/notification is explained in detail in the MIB file.
The SBC service is implemented on a service card on CISCO routers. SBC application offer functionalities like firewall/NAT traversal, media bridging, policy-based call routing, signaling protocol inter-working, call billing and some degree of Call Admission Control. SBC looks to play an essential role in full-scale commercial deployment of VoIP and integration into the existing PSTN. The Session Border Controller (SBC) enables direct IP-to-IP interconnect between multiple administrative domains for session-based services providing protocol inter-working, security, and admission control and management. The SBC is a voice over IP (VoIP) device that sits on the border of a network and controls call admission to that network.
The primary purpose of an SBC is to protect the interior of the network from excessive call load and malicious traffic. Additional functions provided by the SBC include media bridging and billing services.
Various types of notifications required for SBC applications are as follows:
1. When SIP/H2.48 calls are established and SBC application
receives traffic (RTP/RTCP packets) from a source whose IP address or port is ambiguous, a source alert event is generated for the unwanted data packets received by SBC application.
2. Blacklisting is the process of matching inbound packets based
on some simple parameters (for example source IP address) and preventing packets that match those parameters from being processed. SBC detects an attempt to disrupt traffic flowing through it. When a source is blacklisted in SBC application, an event is generated to provide information of the blacklisted source like its IP address, port, VPN address etc.
3. When there is a change in the state of any SBC service
configured like a new SBC service is configured or the SBC card goes to standby state, reboot or offline state, a service is removed from SBC card, an event is generated by SBC.
4. When a large number of SIP/H.248 calls are ongoing and
system is congested i.e. high CPU usage or high use of memory utilization, congestion event is generated at this point and when congestion is cleared means CPU usage comes to normal another event for congestion clear is generated.
5. When a service is configured on SBC application, its call
policies are defined during the configuration like maximum number of calls, maximum call rates etc. If any of these policies is violated, an event for violation of service level agreement is generated.
6. When a radius server is attached/detached with SBC, a
notification is generated to provide information of radius server type, IP address, port etc.
7. When an adjacency is attached/detached with SBC, a
notification is generated to provide its information like the adjacency type and state.
8. When a H.248 controller is attached/detached with SBC to
establish H.248 calls with SBC, a notification is generated to provide the information regarding the attached/detached H.248 controller like controller index, IP address, port, state etc.
GLOSSARY
SBC: Session Border Controller
CSB: CISCO Session Border Controller
CAC: Call Admission Control - protects voice traffic from the
negative effects of other voice traffic and to keep excess voice traffic off the network. It is used to prevent congestion in Voice traffic. It is used in the Call Setup phase.
RTP: Real Time Transport Protocol - defines a standardized
packet format for delivering audio and video over the Internet.
RTCP: Real Time Control Protocol - It is a sister protocol of
the Real-time Transport Protocol (RTP). RTCP provides out-of-band control information for an RTP flow. It partners RTP in the delivery and packaging of multimedia data, but does not transport any data itself. It is used periodically to transmit control packets to participants in a streaming multimedia session.
VMG: Virtual Media Gateway - introduced to bridge between
different transmission technologies and to add service to end-user connections. Its architecture separates control and connectivity functions into physically separate network layers.
VPN: Virtual Private Network - It is a communications network
tunneled through another network, and dedicated for a specific network.
Gate Id - Context Identifiers assigned uniquely to a SIP/H.248 call flows.
Flow Pair Id: Stream Identifiers assigned uniquely to a SIP/H.248 call flows.
Adjacency: An adjacency contains the system information to be
transmitted to next HOP.
SLA: Service Level Agreement - Service level agreement includes
some call admission control policies which are defined during the SBC configurations like maximum number of calls, maximum call rates etc.
Diameter Server: A Diameter Server is one that handles authentication, authorization and accounting requests for a particular realm.
REFERENCES
1. CISCO Session Border Controller Documents and FAQ
http://zed.cisco.com/confluence/display/SBC/SBC
Main OID:
ciscoSessBorderCtrlrEventMIB.1.3.6.1.4.1.9.9.658
109
Objects
Active
Status
8
Dependencies
Imported Objects
Objects
109 total| Object Name |
|---|
ciscoSessBorderCtrlrEventMIBThe main purpose of this MIB is to define the SNMP
notifications and alarms generated by Session Border Controller
application and used to send these notifications to SNMP
manager application. Each of these event/notification is
explained in detail in the MIB file.
The SBC service is implemented on a service card on CISCO
routers. SBC application offer functionalities like
firewall/NAT traversal, media bridging, policy-based call
routing, signaling protocol inter-working, call billing and
some degree of Call Admission Control. SBC looks to play an
essential role in full-scale commercial deployment of VoIP and
integration into the existing PSTN.
The Session Border Controller (SBC) enables direct IP-to-IP
interconnect between multiple administrative domains for
session-based services providing protocol inter-working,
security, and admission control and management. The SBC is a
voice over IP (VoIP) device that sits on the border
of a network and controls call admission to that network.
The primary purpose of an SBC is to protect the interior of
the network from excessive call load and malicious traffic.
Additional functions provided by the SBC include media
bridging and billing services.
Various types of notifications required for SBC applications
are
as follows:
1. When SIP/H2.48 calls are established and SBC application
receives traffic (RTP/RTCP packets) from a source whose IP
address or port is ambiguous, a source alert event is generated
for the unwanted data packets received by SBC application.
2. Blacklisting is the process of matching inbound packets based
on some simple parameters (for example source IP address) and
preventing packets that match those parameters from being
processed. SBC detects an attempt to disrupt traffic flowing
through it. When a source is blacklisted in SBC application, an
event is generated to provide information of the blacklisted
source like its IP address, port, VPN address etc.
3. When there is a change in the state of any SBC service
configured like a new SBC service is configured or the SBC card
goes to standby state, reboot or offline state, a service is
removed from SBC card, an event is generated by SBC.
4. When a large number of SIP/H.248 calls are ongoing and
system is congested i.e. high CPU usage or high use of memory
utilization, congestion event is generated at this point and
when congestion is cleared means CPU usage comes to normal
another event for congestion clear is generated.
5. When a service is configured on SBC application, its call
policies are defined during the configuration like maximum
number of calls, maximum call rates etc. If any of these
policies is violated, an event for violation of service level
agreement is generated.
6. When a radius server is attached/detached with SBC, a
notification is generated to provide information of radius
server type, IP address, port etc.
7. When an adjacency is attached/detached with SBC, a
notification is generated to provide its information like the
adjacency type and state.
8. When a H.248 controller is attached/detached with SBC to
establish H.248 calls with SBC, a notification is generated to
provide the information regarding the attached/detached H.248
controller like controller index, IP address, port, state etc.
GLOSSARY
SBC: Session Border Controller
CSB: CISCO Session Border Controller
CAC: Call Admission Control - protects voice traffic from the
negative effects of other voice traffic and to keep excess voice
traffic off the network. It is used to prevent congestion in
Voice traffic. It is used in the Call Setup phase.
RTP: Real Time Transport Protocol - defines a standardized
packet format for delivering audio and video over the Internet.
RTCP: Real Time Control Protocol - It is a sister protocol of
the Real-time Transport Protocol (RTP). RTCP provides
out-of-band control information for an RTP flow. It partners RTP
in the delivery and packaging of multimedia data, but does not
transport any data itself. It is used periodically to transmit
control packets to participants in a streaming multimedia
session.
VMG: Virtual Media Gateway - introduced to bridge between
different transmission technologies and to add service to
end-user connections. Its architecture separates control and
connectivity functions into physically separate network layers.
VPN: Virtual Private Network - It is a communications network
tunneled through another network, and dedicated for a specific
network.
Gate Id - Context Identifiers assigned uniquely to a SIP/H.248
call flows.
Flow Pair Id: Stream Identifiers assigned uniquely to a
SIP/H.248 call flows.
Adjacency: An adjacency contains the system information to be
transmitted to next HOP.
SLA: Service Level Agreement - Service level agreement includes
some call admission control policies which are defined during
the SBC configurations like maximum number of calls, maximum
call rates etc.
Diameter Server: A Diameter Server is one that handles
authentication, authorization and accounting requests for a
particular realm.
REFERENCES
1. CISCO Session Border Controller Documents and FAQ
http://zed.cisco.com/confluence/display/SBC/SBC MODULE-IDENTITY .1.3.6.1.4.1.9.9.658 |
ciscoSessBorderCtrlrMIBNotifs OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.658.0 |
csbSourceAlertEventThis notification is generated when after SIP/H.248 call
establishment with one party, the media packets are received
from some unexpected source/party (or some wrong/unexpected IP
address).
This is to alert that some unwanted data packets are received
by the system from an undesirable IP/port. NOTIFICATION-TYPE .1.3.6.1.4.1.9.9.658.0.1 |
csbDynamicBlackListEventThis notification is generated when a source is added to or
removed from the blacklist table. Dynamic blacklists put in
place automatically (subject to a set of configurable
constraints) by the SBC when it detects an attempt to disrupt
traffic flowing through it. Dynamic blacklisting does not
require management interference. Blacklist table is
restricted only to SBC service. This table is not made
available to NM. For more Information on Dynamic Blacklisting
refer to the following link:
http://lbj.cisco.com/push_targets1/ucdit/cc/td/doc/product/ioxso
ft/iox34/cgcr34/sbc_c34/sbc34dos.htm
or
Search cisco.com using keywords 'DoS Prevention and Dynamic
Blacklisting'. NOTIFICATION-TYPE .1.3.6.1.4.1.9.9.658.0.2 |
csbAdjacencyStatusThis notification is generated when an Adjacency is attached
to (or detached from) the SBC. NOTIFICATION-TYPE .1.3.6.1.4.1.9.9.658.0.3 |
csbServiceStateEventThis notification is generated when there is a change in the
state of a service card. The changes in the service state are:
-Active
-Standby NOTIFICATION-TYPE .1.3.6.1.4.1.9.9.658.0.4 |
csbSystemCongestionAlarmEventThis notification is generated when CPU/Memory congestion in
SBC is raised or cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.9.9.658.0.5 |
csbSLAViolationThis notification is generated when there is a violation of
Service Level Agreement as described in the policy tables. The
typical service level agreements include maximum number of
calls allowed, max call rate, max bandwidth etc.
This notification has been replaced by the csbSLAViolationRev1
notification. NOTIFICATION-TYPE .1.3.6.1.4.1.9.9.658.0.6 |
csbRadiusConnectionStatusThis notification is generated when the connection to the
radius server changes (connected or disconnected). NOTIFICATION-TYPE .1.3.6.1.4.1.9.9.658.0.7 |
csbDiameterConnectionStatusThis notification is generated when the connection to the
diameter server changes (connected or disconnected). NOTIFICATION-TYPE .1.3.6.1.4.1.9.9.658.0.8 |
csbH248ControllerStatusThis notification is generated when in distributed deployment
model, a DBE is attached or detached from the SBC. NOTIFICATION-TYPE .1.3.6.1.4.1.9.9.658.0.9 |
csbSLAViolationRev1This notification is generated when there is a violation of
Service Level Agreement as described in the policy tables. The
typical service level agreements include maximum number of
alls allowed, max call rate, max bandwidth etc.
This notification replaces the csbSLAViolation notification. NOTIFICATION-TYPE .1.3.6.1.4.1.9.9.658.0.10 |
csbQOSUnansweredCallRatioEventThis notification is generated when QOS metric for Unanswered
Call Ratio (UCR) crosses a configured threshold and attains
either of minor, major or critical level. NOTIFICATION-TYPE .1.3.6.1.4.1.9.9.658.0.11 |
csbQOSUnansweredCallRatioClearEventThis notification is generated when QOS metric for unanswered
call ratio (UCR) reaches back to normal level from one of the
major/minor/critical level. NOTIFICATION-TYPE .1.3.6.1.4.1.9.9.658.0.12 |
csbQOSPercentPktLostEventThis notification is generated when QOS metric for percentage
of media packets lost crosses a configured threshold and attains
either of minor, major or critical level. NOTIFICATION-TYPE .1.3.6.1.4.1.9.9.658.0.13 |
csbQOSPercentPktLostClearEventThis notification is raised whenever QOS metric for percentage
media packet lost reaches back to normal level from one of the
major/minor/critical level. NOTIFICATION-TYPE .1.3.6.1.4.1.9.9.658.0.14 |
csbQOSPercentPktDropEventThis notification is generated when QOS metric for percentage
of media packets dropped crosses a configured threshold and
attains either of minor, major or critical level. NOTIFICATION-TYPE .1.3.6.1.4.1.9.9.658.0.15 |
csbQOSPercentPktDropClearEventThis notification is raised whenever QOS metric for percentage
media packet dropped reaches back to normal level from one of
the major/minor/critical level. NOTIFICATION-TYPE .1.3.6.1.4.1.9.9.658.0.16 |
csbQOSRoundTripDelayEventThis notification is generated when QOS metric for round trip
delay(RTD) crosses a configured threshold and
attains either of minor, major or critical level. NOTIFICATION-TYPE .1.3.6.1.4.1.9.9.658.0.17 |
csbQOSRoundTripDelayClearEventThis notification is generated when QOS metric for round trip
delay(RTD) reaches back to normal level from one of the
major/minor/critical level. NOTIFICATION-TYPE .1.3.6.1.4.1.9.9.658.0.18 |
csbQOSLocalJitterEventThis notification is generated when QOS metric for local media
packet jitter crosses a configured threshold and attains either
of minor, major or critical level. NOTIFICATION-TYPE .1.3.6.1.4.1.9.9.658.0.19 |
csbQOSLocalJitterClearEventThis notification is generated when QOS metric for local media
packet jitter reaches back to normal level from one of the
major/minor/critical level. NOTIFICATION-TYPE .1.3.6.1.4.1.9.9.658.0.20 |
csbQOSRemoteJitterEventThis notification is generated when QOS metric for remote media
packet jitter crosses a configured threshold and attains either
of minor, major or critical level. NOTIFICATION-TYPE .1.3.6.1.4.1.9.9.658.0.21 |
csbQOSRemoteJitterClearEventThis notification is generated when QOS metric for remote media
packet jitter reaches back to normal level from one of the
major/minor/critical level. NOTIFICATION-TYPE .1.3.6.1.4.1.9.9.658.0.22 |
csbQOSMoscqeEventThis notification is generated when QOS metric for moscqe -
Mean Opinion Score(MOS) - value crosses a configured threshold
and attains either of minor, major or critical level. NOTIFICATION-TYPE .1.3.6.1.4.1.9.9.658.0.23 |
csbQOSMoscqeClearEventThis notification is generated when QOS metric for moscqe -
Mean Opinion Score(MOS) - value reaches back to normal level
from one of the major/minor/critical level. NOTIFICATION-TYPE .1.3.6.1.4.1.9.9.658.0.24 |
ciscoSessBorderCtrlrMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.658.1 |
csbAlarmSubsystemThis object identifies the subsystem or application module
which generated the alarm.
The subsystem which is involved in call establishment only is
of type signaling.
The subsystem which handles the traffic/data (RTP/RTCP packets)
is of type media.
The subsystem which is involved in call admission control is of
type CAC.ro Enumeration .1.3.6.1.4.1.9.9.658.1.1 |
csbAlarmSeverityThis object identifies the perceived alarm severity associated
with a service or safety affecting condition and/or event.
These are based on ITU severities except that info is added.
cleared -
Indicates a previous alarm condition has been cleared.
It is not required (unless specifically stated elsewhere
on a case by case basis) that an alarm condition that has
been cleared will produce a notification or other event
containing an alarm severity with this value.
indeterminate -
Indicates that the severity level cannot be determined.
critical -
Indicates that a service or safety affecting condition has
occurred and an immediate corrective action is required.
major -
Indicates that a service affecting condition has occurred
and an urgent corrective action is required.
minor -
Indicates the existence of a non-service affecting
condition and that corrective action should be taken in
order to prevent a more serious (for example, service or
safety affecting) condition.
warning -
Indicates the detection of a potential or impending service
or safety affecting condition, before any significant
effects have been felt.
info -
Indicates an alarm condition that does not meet any other
severity definition. This can include important, but
non-urgent, notices or informational events.ro CiscoAlarmSeverity (CISCO-TC) .1.3.6.1.4.1.9.9.658.1.2 |
csbAlarmIDThis object identifies the alarm identification number. It is
a unique number generated by agent in the incremented order
like for the first alarm it is 1, for second alarm it is 2 and
so on.ro Integer32 .1.3.6.1.4.1.9.9.658.1.3 |
csbAlarmTimeThis object identifies the time when alarm was generated. It
is in the form: dow mon dd hh:mm:ss zzz yyyy
where:
dow is the day of the week (Sun, Mon, Tue, Wed,
Thu, Fri, Sat).
mon is the month (Jan, Feb, Mar, Apr, May, Jun,
Jul, Aug, Sep, Oct, Nov, Dec).
dd is the day of the month (01 through 31), as two decimal
digits.
hh is the hour of the day (00 through 23), as two decimal
digits.
mm is the minute within the hour (00 through 59), as two
decimal digits.
ss is the second within the minute (00 through 61), as two
decimal digits.
zzz is the time zone (and may reflect daylight savings time).
Standard time zone abbreviations include those recognized by
the method parse. If time zone information is not available,
then zzz is empty - that is, it consists of no characters at
all.
yyyy is the year, as four decimal digits.ro OCTET STRING .1.3.6.1.4.1.9.9.658.1.4 |
csbSBCServiceNameThis MIB object represents the name of the SBC service
configured on the service card.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.9.9.658.1.5 |
csbAlarmDescriptionThis MIB object represents the description of the conditions
due to which the notification is raised.ro OCTET STRING .1.3.6.1.4.1.9.9.658.1.6 |
csbSrcAlertVdbeIdThis MIB object represents the name of the virtual media
gateway. The length of this object will be zero if the virtual
media gateway is not defined.ro SnmpAdminString .1.3.6.1.4.1.9.9.658.1.7 |
csbSrcAlertGateIdThis MIB object represents the context identifier for a
particular SIP/H.248 call flow. The context identifier for each
call is unique. The context identifier is also called as gate
identifier for the SIP/H.248 call flow.ro Unsigned32 .1.3.6.1.4.1.9.9.658.1.8 |
csbSrcAlertFlowPairIdThis MIB object represents the stream identifier given to a
particular SIP/H.248 call flow. The stream identifier for each
call is unique. The stream identifier is also called as flow
pair identifier for the SIP/H.248 call flow.ro Unsigned32 .1.3.6.1.4.1.9.9.658.1.9 |
csbSrcAlertLocalAddressTypeThis MIB object represents the address type of local source on
which the media (RTP/RTCP) packets from an unexpected source
was received during a SIP/H.248 call flow. The IP address could
be IPv4 as well as IPv6.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.9.9.658.1.10 |
csbSrcAlertLocalAddressThis MIB object represents the local address on which the
media (RTP/RTCP) packets from an unexpected source was received
during a SIP/H.248 call flow. The IP address could be of type
csbSrcAlertLocalAddressType.ro InetAddress .1.3.6.1.4.1.9.9.658.1.11 |
csbSrcAlertLocalPortThis MIB object represents the local RTP port number for the
flow on which the unexpected source packet was received.
Note the RTP port number is reported in the case where the
unexpected packet was received on the RTCP port for the flow.ro InetPortNumber (INET-ADDRESS-MIB) .1.3.6.1.4.1.9.9.658.1.12 |
csbSrcAlertRemoteAddressTypeThis MIB object represents the type of address for the source
address in media packets received from an unexpected source
(not
received from the source with which SIP/H.248 call is already
established but are received from some other IP address).ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.9.9.658.1.13 |
csbSrcAlertRemoteAddressThis MIB object represents the source address from which
unexpected media packets are received during a SIP/H.248
call flow, i.e., media packets are not received from the source
with which SIP/H.248 call is already established but are
received from some other IP address. The IP address could be
of type csbSrcAlertRemoteAddressType.ro InetAddress .1.3.6.1.4.1.9.9.658.1.14 |
csbSrcAlertRemotePortThis MIB object represents the source port from which
unexpected media packets are received during a SIP/H.248
call flow (i.e. media packets are not received from the source
with which SIP/H.248 call is already established but are
received from some other IP address).ro InetPortNumber .1.3.6.1.4.1.9.9.658.1.15 |
csbSrcAlertVpnIdThis MIB object represents the VPN Identifier for the Virtual
Private Network within which the source flow is allocated. As
this is an OCTET STRING, the MIB object will populate a NULL
string if the source flow is not part of a VPN and in this case
its length will be 0.ro OCTET STRING .1.3.6.1.4.1.9.9.658.1.16 |
csbDynamicBlackListSubFamilyThis MIB object represents the subfamily to which a blacklist
source belongs.ro CsbDynamicBlackListedSrcSubFamily .1.3.6.1.4.1.9.9.658.1.17 |
csbDynamicBlackListVpnIdThis MIB object represents the VPN Identifier for the Virtual
Private Network that the source flow is allocated in. The value
of this MIB object will be 0 if the source flow is not part of
a VPN.ro OCTET STRING .1.3.6.1.4.1.9.9.658.1.18 |
csbDynamicBlackListAddressTypeThis MIB object represents the type of the address of the
source. This MIB object is not applicable for subfamilies of
type 'blackVpn' and hence a value of 'unknown' will be
populated.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.9.9.658.1.19 |
csbDynamicBlackListAddressThis MIB object represents the address of the source. This
object could be if type csbDynamicBlackListAddressType. This
MIB object is not applicable for subfamilies of type 'blackVpn'
and hence a value of 'unknown' will be populated.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.9.9.658.1.20 |
csbDynamicBlackListTransportTypeThis MIB object represents the transport type of the source
port. This MIB object is not applicable for subfamilies of type
'blackVpn' and 'blackAddr', hence a value 'unknown' will be
populated.ro CsbDynamicBlackListedTransPortType .1.3.6.1.4.1.9.9.658.1.21 |
csbDynamicBlackListPortNumberThis MIB object represents the source port number. This MIB
object is not applicable for subfamilies of type 'blackVpn' and
'blackAddr' and hence a value of 'unknown' will be populated.ro InetPortNumber (INET-ADDRESS-MIB) .1.3.6.1.4.1.9.9.658.1.22 |
csbDynamicBlackListSrcBlockedThis MIB object represents the access control imposed on the
blacklisted source by the controller. A value of 'true'
indicates access is blocked and A value of 'false' indicates
that the access is unblocked.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.658.1.23 |
csbAdjacencyTypeThis MIB object represents the protocol type of the adjacency.
The adjacency are of two types - SIP and H.323.ro Enumeration .1.3.6.1.4.1.9.9.658.1.24 |
csbAdjacencyStateThis MIB object represents the adjacency state. The adjacency
state can either be attached or detached.ro Enumeration .1.3.6.1.4.1.9.9.658.1.25 |
csbAdjacencyNameThis MIB object represents the name of the adjacency. The
length of this object will be zero if the adjacency name is not
defined.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.9.9.658.1.26 |
csbAdjacencyAccountNameThis MIB object represents the account name associated with the
adjacency.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.9.9.658.1.27 |
csbSBCServiceStateThis MIB object represents the current state of the service
card.
SBC service is in active state if it is configured on the
primary card and the service card is in active state.
The SBC service is in standby state if the service card on
which the service is configured goes to standby mode.
The SBC service is in offline mode if the service card on which
the service is configured is in reset state or reboot state.ro Enumeration .1.3.6.1.4.1.9.9.658.1.28 |
csbSBCServiceSlotThis MIB object represents the slot identifier of the service
card.ro Integer32 .1.3.6.1.4.1.9.9.658.1.29 |
csbCongestionAlarmTypeThis MIB object represents the type of the CSB system
congestion alarm. The alarm is raised either due to 'high CPU
usage' or 'high memory usage'.ro Enumeration .1.3.6.1.4.1.9.9.658.1.30 |
csbCongestionAlarmStateThis MIB object represents the CSB system congestion alarm
state. The state is either 'raised' or 'cleared'.ro Enumeration .1.3.6.1.4.1.9.9.658.1.31 |
csbSLAPolicyAccountNameThis MIB object represents the account name of the source
which was involved in policy violation.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.9.9.658.1.32 |
csbSLAPolicyScopeThis MIB object represents the scope of the SLA policy which
has been violated.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.9.9.658.1.33 |
csbSLAPolicyLimitThis MIB object represents the currently defined policy
limits.rodeprecated Integer32 .1.3.6.1.4.1.9.9.658.1.34 |
csbSLAViolationEventThis MIB object represents the type of SLA policy violation
event.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.9.9.658.1.35 |
csbSLAPolicyRestrictionThis MIB object represents the SLA policy restriction
description means the violation of the call policy has resulted
into which type of restriction, like if maximum number of calls
exceeds then it will restrict the number of concurrent calls.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.9.9.658.1.36 |
csbSLACurrentUsageThis MIB object represents the actual usage value for the event
which leads to the SLA violation, like if maximum number of
calls are more than SLA policy then actual value of this
parameter/event.rodeprecated Integer32 .1.3.6.1.4.1.9.9.658.1.37 |
csbRadiusConnectionStateThis MIB object represents the RADIUS server connection state.
The connection state can either be up or down.ro Enumeration .1.3.6.1.4.1.9.9.658.1.38 |
csbRadiusTypeThis MIB object represents the type of RADIUS either for
accounting or for authentication.ro Enumeration .1.3.6.1.4.1.9.9.658.1.39 |
csbRadiusServerNameThis MIB object represents the name of the RADIUS server.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.9.9.658.1.40 |
csbRadiusServerAddressTypeThis MIB object represents the address type of RADIUS server
(IPv4 or IPv6).ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.9.9.658.1.41 |
csbRadiusServerAddressThis MIB object represents address of the RADIUS server. This
object could be of type csbRadiusServerAddressType.ro InetAddress .1.3.6.1.4.1.9.9.658.1.42 |
csbRadiusServerPriorityThis MIB object represents the priority of the RADIUS server
in case of the multiple servers. Higher the number, the higher
is its priority.ro Integer32 .1.3.6.1.4.1.9.9.658.1.43 |
csbDiameterConnectionStateThis MIB object represents the diameter server connection
state. The connection state can either be up or down.ro Enumeration .1.3.6.1.4.1.9.9.658.1.44 |
csbDiameterTypeThis MIB object represents the type of diameter server used
which can be either for accounting or for authentication here.ro Enumeration .1.3.6.1.4.1.9.9.658.1.45 |
csbDiameterGroupNameThis MIB object represents the diameter group name. The length
of this object is zero if the diameter type is authentication.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.9.9.658.1.46 |
csbDiameterServerNameThis MIB object represents the diameter server name.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.9.9.658.1.47 |
csbH248ControllerStateThis MIB object represents the current state of H.248
controller with respect to SBC which is attached or detached
state.ro Enumeration .1.3.6.1.4.1.9.9.658.1.48 |
csb248ControllerAddressTypeThis MIB object represents the address type of the H.248
controller.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.9.9.658.1.49 |
csbH248ControllerAddressThis MIB object represents the address of the H.248
controller. This object is of the type
csb248ControllerAddressType.ro InetAddress .1.3.6.1.4.1.9.9.658.1.50 |
csbH248ControllerPortThis MIB object represents the port of the H.248 controller.ro InetPortNumber (INET-ADDRESS-MIB) .1.3.6.1.4.1.9.9.658.1.51 |
csbSourceAlertNotifEnabledThe source alert linkset notification truth value.
'true' - Indicates that csbSourceAlertEvent notification is to
be generated when the state changes. That is, the notification
generation is enabled.
'false' - Indicates that csbSourceAlertEvent notification
generation is disabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.658.1.52 |
csbBlackListNotifEnabledThe dynamic blacklist linkset notification truth value.
'true' - Indicates that csbDynamicBlackListEvent notification is
to be generated when the state changes. That is, the
notification generation is enabled.
'false' - Indicates that csbDynamicBlackListEvent notification
generation is disabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.658.1.53 |
csbAdjacencyStatusNotifEnabledThe adjacency status linkset notification truth value.
'true' - Indicates that csbAdjacencyStatus notification is
to be generated when the state changes. That is, the
notification generation is enabled.
'false' - Indicates that csbAdjacencyStatus notification
generation is disabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.658.1.54 |
csbServiceStateNotifEnabledThe service state linkset notification truth value.
'true' - Indicates that csbServiceStateEvent notification is
to be generated when the state changes. That is, the
notification generation is enabled.
'false' - Indicates that csbServiceStateEvent notification
generation is disabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.658.1.55 |
csbCongestionAlarmNotifEnabledThe system congestion alarm linkset notification truth value.
'true' - Indicates that csbSystemCongestionAlarmEvent
notification is to be generated when the state changes. That is,
the notification generation is enabled.
'false' - Indicates that csbSystemCongestionAlarmEvent
notification generation is disabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.658.1.56 |
csbSLAViolationNotifEnabledThe SLA violation linkset notification truth value.
'true' - Indicates that csbSLAViolation notification is to be
generated when the state changes. That is, the notification
generation is enabled.
'false' - Indicates that csbSLAViolation notification generation
is disabled.rwdeprecated TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.658.1.57 |
csbRadiusConnectionStatusNotifEnabledThe radius connection status linkset notification truth value.
'true' - Indicates that csbRadiusConnectionStatus notification
is to be generated when the state changes. That is, the
notification generation is enabled.
'false' - Indicates that csbRadiusConnectionStatus notification
generation is disabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.658.1.58 |
csbDiameterConnectionStatusNotifEnabledThe diameter connection status linkset notification truth
value.
'true' - Indicates that csbDiameterConnectionStatus notification
is to be generated when the state changes. That is, the
notification generation is enabled.
'false' - Indicates that csbDiameterConnectionStatus
notification generation is disabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.658.1.59 |
csbH248ControllerStatusNotifEnabledThe H248 controller status linkset notification truth
value.
'true' - Indicates that csbH248ControllerStatus notification is
to be generated when the state changes. That is, the
notification generation is enabled.
'false' - Indicates that csbH248ControllerStatus notification
generation is disabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.658.1.60 |
csbSLAPolicyLimitRev1This MIB object represents the currently defined policy limits.
If the SLA is for max-num-calls, this value is the configured
maximum number of calls. If the SLA is for max-call-rate, this
value is the configured maximum number of calls per minute. If
the SLA is for max-bandwidth, this value is the configured
maximum bidirection bandwidth in bps.
This object replaces the csbSLAPolicyLimit object.ro Counter64 .1.3.6.1.4.1.9.9.658.1.61 |
csbSLACurrentUsageRev1This MIB object represents the actual usage value for the event
which leads to the SLA violation, like if maximum number of
calls are more than SLA policy then actual value of this
parameter/event. If the SLA is for max-num-calls, this value is
the current number of calls. If the SLA is for max-call-rate,
this value is the current number of calls per minute. If the SLA
is for max-bandwidth, this value is the current bidirection
bandwidth in bps.
This object replaces the csbSLACurrentUsage object.ro Counter64 .1.3.6.1.4.1.9.9.658.1.62 |
csbSLAViolationNotifEnabledRev1The SLA violation linkset notification truth value.
'true' - Indicates that csbSLAViolationRev1 notification is to
be generated when the state changes. That is, the notification
generation is enabled.
'false' - Indicates that csbSLAViolationReve1 notification
generation
is disabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.658.1.63 |
csbQOSAlertCurrentValueThis object indicates the current measured value of the QOS
object.ro Unsigned32 .1.3.6.1.4.1.9.9.658.1.64 |
csbQOSAlertCurrentLevelThe current Threshold Level of the measured object. The levels
are Major, Minor, Critical.ro CiscoAlarmSeverity (CISCO-TC) .1.3.6.1.4.1.9.9.658.1.65 |
csbQOSAlertPreviousLevelThe previous threshold level of the measured object. The levels
are Major, Minor, Critical.ro CiscoAlarmSeverity (CISCO-TC) .1.3.6.1.4.1.9.9.658.1.66 |
csbQOSNormalAlertCountThis object represents the number of times this QOS object,
has entered normal level.ro Counter32 UNITS "occurrences" .1.3.6.1.4.1.9.9.658.1.67 |
csbQOSMinorAlertCountThis object represents number of times the QOS object, has
entered minor level.ro Counter32 UNITS "occurrences" .1.3.6.1.4.1.9.9.658.1.68 |
csbQOSCriticalAlertCountThis object represents the number of times the QOS object, has
entered critical level.ro Counter32 UNITS "occurrences" .1.3.6.1.4.1.9.9.658.1.69 |
csbQOSMajorAlertCountThis object represents number the of times the QOS object, has
entered major level.ro Counter32 UNITS "occurrences" .1.3.6.1.4.1.9.9.658.1.70 |
csbQOSAlertTypeThis object represents that the value of QOS parameter is
applicable at which scope. QOS parameters can be calculated
both at global as well as adjacency scope.ro CsbQOSAlertScopeType .1.3.6.1.4.1.9.9.658.1.71 |
csbQOSAlertSummaryPeriodThis object indicates the interval for which the periodic
statistics information is to be displayed. The interval
values can be 5 min, 15 mins, 1 hour or 1 day.ro CiscoSbcPeriodicStatsInterval (CISCO-SESS-BORDER-CTRLR-CALL-STATS-MIB) .1.3.6.1.4.1.9.9.658.1.72 |
csbQOSAlertUnansweredCallRatioNotifEnabledThe Unanswered Call Ratio notification truth value.
'true' - Indicates that csbQOSUnansweredCallRatioEvent
notification is to be generated when the state changes. That is,
the notification generation is enabled.
'false' - Indicates that csbQOSUnansweredCallRatioEvent
notification generation is disabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.658.1.73 |
csbQOSAlertPercentPktDropNotifEnabledThe percent media packet drop notification truth value.
'true' - Indicates that csbQOSPercentPktDropEvent notification
is to be generated when the state changes. That is, the
notification generation is enabled.
'false' - Indicates that csbQOSPercentPktDropEvent notification
generation is disabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.658.1.74 |
csbQOSAlertRoundTripDelayNotifEnabledThe round trip delay notification truth value.
'true' - Indicates that csbQOSRoundTripDelayEvent notification
is to be generated when the state changes. That is, the
notification generation is enabled.
'false' - Indicates that csbQOSRoundTripDelayEvent notification
generation is disabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.658.1.75 |
csbQOSAlertMoscqeNotifEnabledThe moscqe notification truth value.
'true' - Indicates that csbQOSMoscqeEvent notification is to be
generated when the state changes. That is, the notification
generation is enabled.
'false' - Indicates that csbQOSMoscqeEvent notification
generation is disabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.658.1.76 |
csbQOSAlertLocalJitterNotifEnabledThe remote media packet jitter notification truth value.
'true' - Indicates that csbQOSLocalJitterEvent notification is
to be generated when the state changes. That is, the
notification generation is enabled.
'false' - Indicates that csbQOSLocalJitterEvent notification
generation is disabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.658.1.77 |
csbQOSAlertRemoteJitterNotifEnabledThe remote media packet jitter notification truth value.
'true' - Indicates that csbQOSRemoteJitterEvent notification is
to be generated when the state changes. That is, the
notification generation is enabled.
'false' - Indicates that csbQOSRemoteJitterEvent notification
generation is disabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.658.1.78 |
csbQOSAlertPercentPktLostNotifEnabledThe percent media packet drop notification truth value.
'true' - Indicates that csbQOSPercentPktLostEvent notification
is to be generated when the state changes. That is, the
notification generation is enabled.
'false' - Indicates that csbQOSPercentPktLostEvent notification
generation is disabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.658.1.79 |
ciscoSessBorderCtrlrMIBConform OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.658.2 |
ciscoSessBorderCtrlrMIBCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.658.2.1 |
ciscoSessBorderCtrlrMIBGroups OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.658.2.2 |