CISCO-SERVICE-CONTROL-RDR-MIB
AI MIB Summary
The CISCO-SERVICE-CONTROL-RDR-MIB manages the configuration and statistical monitoring of the Raw Data Record (RDR) Formatter within Cisco service control entities, specifically tracking the categorization, queuing, and delivery status of raw data records to external collectors. It provides granular visibility into per-category counters (sent, dropped, queued) and destination redundancy states, enabling the administration of priority-based forwarding logic across multiple IP-based RDR destinations.
This MIB module defines objects describing statistics and configuration relating to the Raw Data Record Formatter running on a service control entity.
The Raw Data Record (RDR) formatter is a component implemented by the service control entity that gathers raw data records produced by the entity and delivers them to external entities as reports. The external entities are called RDR destinations or RDR collectors. The RDR formatter can be configured to send reports to one or multiple destinations.
RDR formatter can group RDRs into potentially four categories. RDR mapping to the categories is done by the client application or the user and reflects different logical destinations or purposes. For example the application may map Quota related RDRs to category 1, and Transaction related RDRs to category 2. The user can configure these categories to different destinations and assign them with different priorities. Each category has a separate queue for forwarding the RDRs and has seperate counters for gathering of statistics (sent, dropped, queued etc.). An RDR can belong to any one of the category as chosen by the user or client application.
The RDR formatter supports multiple destinations identified by IP address and a port number. Each destination is assigned with a priority for each of the categories. Priority is a number in the range of 1-100, with 100 being the highest priority. The priorities are effective only when the formatter is in forwarding mode 'Redundancy' and are configured during destination configuration (while assigning the destination with categories). For example we have destination A configured with category 1 which is configured with priority 100, destination B configured with category 1 and priority 80 and destination C with category 1 and priority 90. When in redundancy mode the formatter will set the active destination for a category to be the destination with the highest priority. For category 1 the active destination will be A. If destination A goes down then the next destination selected by the formatter as active is destination C.
Main OID:
ciscoServiceControlRdrMIB.1.3.6.1.4.1.9.9.637
50
Objects
Active
Status
7
Dependencies
Imported Objects
Objects
50 total| Object Name |
|---|
ciscoServiceControlRdrMIBThis MIB module defines objects describing statistics and
configuration relating to the Raw Data Record Formatter running
on a service control entity.
The Raw Data Record (RDR) formatter is a component implemented
by the service control entity that gathers raw data records
produced by the entity and delivers them to external entities
as reports. The external entities are called RDR destinations
or RDR collectors. The RDR formatter can be configured to send
reports to one or multiple destinations.
RDR formatter can group RDRs into potentially four categories.
RDR mapping to the categories is done by the client application
or the user and reflects different logical destinations or
purposes. For example the application may map Quota related
RDRs to category 1, and Transaction related RDRs to category 2.
The user can configure these categories to different
destinations and assign them with different priorities. Each
category has a separate queue for forwarding the RDRs and has
seperate counters for gathering of statistics (sent, dropped,
queued etc.). An RDR can belong to any one of the category as
chosen by the user or client application.
The RDR formatter supports multiple destinations identified by
IP address and a port number. Each destination is assigned with
a priority for each of the categories. Priority is a number in
the range of 1-100, with 100 being the highest priority. The
priorities are effective only when the formatter is in
forwarding mode 'Redundancy' and are configured during
destination configuration (while assigning the destination with
categories). For example we have destination A configured with
category 1 which is configured with priority 100, destination B
configured with category 1 and priority 80 and destination C
with category 1 and priority 90. When in redundancy mode the
formatter will set the active destination for a category to be
the destination with the highest priority. For category 1 the
active destination will be A. If destination A goes down then
the next destination selected by the formatter as active is
destination C. MODULE-IDENTITY .1.3.6.1.4.1.9.9.637 |
ciscoSCRdrMIBNotifs OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.637.0 |
cscRdrCategoryStoppedDiscardingReportsTrapThe system generates this notification to indicate that the
system has recovered from congestion or unavailibility of the
RDR collector identified by the value of cscRdrCategoryID and
has stopped discarding reports being sent to this RDR
collector. NOTIFICATION-TYPE .1.3.6.1.4.1.9.9.637.0.1 |
cscRdrCategoryDiscardingReportsTrapThe system generates this notification to indicate that the
system has either encountered congestion or unavailibility of
the RDR collector with the category identified by the value of
cscRdrCategoryID and has started discarding reports destined to
this collector. The value of cscRdrCategoryNumReportsDiscarded
indicates the number of discarded reports. NOTIFICATION-TYPE .1.3.6.1.4.1.9.9.637.0.2 |
cscRdrNoActiveConnectionTrapThe system generates this notification to indicate that there
is no active connection between the RDR formatter and any
collector. NOTIFICATION-TYPE .1.3.6.1.4.1.9.9.637.0.3 |
cscRdrConnectionStatusDownTrapThe system generates this notification to indicate that a
connection to destination has transitioned to the 'down' state. NOTIFICATION-TYPE .1.3.6.1.4.1.9.9.637.0.4 |
cscRdrActiveConnectionTrapThe system generates this notification to indicate that a
connection to the destination address cscRdrDestInetAddress has
become active on TCP port cscRdrDestPort. NOTIFICATION-TYPE .1.3.6.1.4.1.9.9.637.0.5 |
cscRdrConnectionStatusUpTrapThe system generates this notification to indicate that a
connection to the destination address cscRdrDestInetAddress has
become transitioned to 'up' state on TCP port cscRdrDestPort. NOTIFICATION-TYPE .1.3.6.1.4.1.9.9.637.0.6 |
ciscoSCRdrMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.637.1 |
cscRdrFormatterTableThis table lists the operational information and aggregated
statistics for the RDR formatter of a service control entity. SEQUENCE OF CscRdrFormatterEntry .1.3.6.1.4.1.9.9.637.1.1 |
cscRdrFormatterEntryThis entry contains the operational data and global counters
for the RDR formatter associated with the service control entity
identified by its assigned entPhysicalIndex. An entry exists
for each corresponding row in the entPhysicalTable having one of
the following values assigned to entPhysicalVendorType:
- cevChassisSCE2000
- cevChassisSCE1000
- cevNmeApaModule. CscRdrFormatterEntry .1.3.6.1.4.1.9.9.637.1.1.1 |
cscRdrFormatterEnableThis object specifies whether the RDR formatter is enabled or
disabled. When the RDR formatter is enabled, it sends the
records it gets from the traffic processors to the RDR
destination as defined in the cscRdrDestTable.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.637.1.1.1.1 |
cscRdrFormatterNumSentReportsThis object indicates the number of reports sent by the
RDR formatter.
Discontinuities in the value of this counter can occur at
disabling/enabling of the RDR formatter, and at other times
as indicated by the value of cscRdrCounterDiscontinuityTime.ro Counter32 UNITS "reports" .1.3.6.1.4.1.9.9.637.1.1.1.2 |
cscRdrFormatterNumDiscardedReportsThis object indicates the number of reports discarded by the
RDR formatter due to insufficient resources or unavailibility
of
the destination.
Discontinuities in the value of this counter can occur at
disabling/enabling of the RDR formatter, and at other times
as indicated by the value of cscRdrCounterDiscontinuityTime.ro Counter32 UNITS "reports" .1.3.6.1.4.1.9.9.637.1.1.1.3 |
cscRdrFormatterReportRateThis object indicates the rate at which the RDR formatter is
currently sending reports to all of the destinations.ro Gauge32 UNITS "reports per second" .1.3.6.1.4.1.9.9.637.1.1.1.4 |
cscRdrFormatterReportRatePeakThis object indicates the maximum rate at which the RDR
formatter sent reports to all of the destinations since
sysUpTime, if cscRdrCounterDiscontinuityTime is zero. If
cscRdrCounterDiscontinuityTime has a non zero value, the
maximum rate is determined from this value.ro Gauge32 UNITS "reports per second" .1.3.6.1.4.1.9.9.637.1.1.1.5 |
cscRdrFormatterReportRatePeakTimeThis object indicates the time elapsed since the
cscRdrFormatterReportRatePeak value occured.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.9.9.637.1.1.1.6 |
cscRdrFormatterProtocolThis object specifies the RDR protocol currently used by the
RDR formatter.
'other' : The RDR formatter is using a protocol not
recognized by this revision of the MIB.
'rdrv1' : RDR protocol version 1
'netflowV9' : NetFlow ver 9rw Enumeration .1.3.6.1.4.1.9.9.637.1.1.1.7 |
cscRdrFormatterForwardingModeThis object specifies the mode by which the RDR formatter
sends the reports to its destinations.
'other' : The RDR formatter is using a protocol
not recognized by this revision of the
MIB.
'redundancy' : The reports are sent to the primary
(active destination) and all of the
other destinations are in standby.
'simpleLoadBalancing' : The reports are sent to one
destination
at a time in a round robin manner.
'multicast' : The reports are sent to all of the
destinations.rw Enumeration .1.3.6.1.4.1.9.9.637.1.1.1.8 |
cscRdrDestTableThis table lists the addresses of the configured RDR
destination servers and the corresponding connection status for
each destination. The RDR formatter sends reports to one or
more configured destinations that have a connection to the RDR
formatter.
This table also shows the current connection status of each
destination. SEQUENCE OF CscRdrDestEntry .1.3.6.1.4.1.9.9.637.1.2 |
cscRdrDestEntryThis entry contains the operational data and global counters
for a connection between the RDR formatter destination and the
RDR formatter associated with the service control entity
identified by its assigned entPhysicalIndex. An entry exists
for each corresponding row in the entPhysicalTable having one
of
the following values assigned to entPhysicalVendorType:
- cevChassisSCE2000
- cevChassisSCE1000
- cevNmeApaModule.
Each connection between RDR formatter and RDR destination is
uniquely identified by 'cscRdrDestIndex'. CscRdrDestEntry .1.3.6.1.4.1.9.9.637.1.2.1 |
cscRdrDestIndexA monotonically increasing integer for the sole purpose of
indexing RDR destinations. When it reaches the maximum value
the agent flushes the table and wraps the value back to 1. Unsigned32 (1..4294967295 ) .1.3.6.1.4.1.9.9.637.1.2.1.1 |
cscRdrDestInetAddressTypeThis object indicates the type of Internet address by which
the RDR destination server is reachable.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.9.9.637.1.2.1.2 |
cscRdrDestInetAddressThis object indicates the RDR destination server IP Address.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.9.9.637.1.2.1.3 |
cscRdrDestPortThis object indicates the port on which the RDR destination
server listens.ro InetPortNumber (INET-ADDRESS-MIB) .1.3.6.1.4.1.9.9.637.1.2.1.4 |
cscRdrDestPriorityThis object indicates the priority given to the RDR destination
server. The RDR formatter determines the priority of a
destination by the value of entPhysicalIndex and the RDR
category of the destination. RDR formatter assigns the highest
priority to the destination which has the same value of
entPhysicalIndex and RDR category as that of the RDR formatter.
The RDR formatter activates the destination server which is
reachable and with the highest priority.ro Integer32 (1..100 ) .1.3.6.1.4.1.9.9.637.1.2.1.5 |
cscRdrDestStatusThis object indicates the status of this RDR destination.
'other' : None of the following.
'active' : The reports are sent to this destination.
'standby': This destination is a backup.
Only one RDR destination can be 'active' if the
cscRdrFormatterForwardingMode is set to either 'redundancy' or
'simpleLoadBalancing'. Multiple RDR destinations can be in
'active' state when cscRdrFormatterForwardingMode is set to
'multicast'.ro Enumeration .1.3.6.1.4.1.9.9.637.1.2.1.6 |
cscRdrDestConnectionStatusThis object indicates the status of the connection between the
RDR formatter and this destination.
'other' : The connection is in some unknown state.
'up' : The RDR formatter can reach this destination.
'down' : The RDR formatter cannot reach this destination.ro Enumeration .1.3.6.1.4.1.9.9.637.1.2.1.7 |
cscRdrDestNumSentReportsThis object indicates the number of reports sent by the
RDR formatter to this destination.
Discontinuities in the value of this counter can occur at
disabling/enabling of the RDR formatter, and at other times
as indicated by the value of cscRdrCounterDiscontinuityTime.ro Counter32 UNITS "reports" .1.3.6.1.4.1.9.9.637.1.2.1.8 |
cscRdrDestNumDiscardedReportsThis object indicates the number of reports dropped by the RDR
formatter for this destination.
Discontinuities in the value of this counter can occur at
disabling/enabling of the RDR formatter, and at other times
as indicated by the value of cscRdrCounterDiscontinuityTime.ro Counter32 .1.3.6.1.4.1.9.9.637.1.2.1.9 |
cscRdrDestReportRateThis object indicates the rate at which the RDR formatter is
currently sending reports to this destinations.ro Gauge32 UNITS "reports per second" .1.3.6.1.4.1.9.9.637.1.2.1.10 |
cscRdrCategoryTableThis table describes the operational values and aggregated
statistics of the different categories of the RDR Formatter. SEQUENCE OF CscRdrCategoryEntry .1.3.6.1.4.1.9.9.637.1.3 |
cscRdrCategoryEntryThis entry contains the operational data and global counters
for a category configured on a RDR formatter of a service
control entity identified by the entPhysicalIndex in the
ENTITY-MIB with the entPhysicalVendorType set to any of the
following values:
'cevChassisSCE2000'
'cevChassisSCE1000'
'cevNmeApaModule'. CscRdrCategoryEntry .1.3.6.1.4.1.9.9.637.1.3.1 |
cscRdrCategoryIndexThis object indicates the category number, index to the
table. Unsigned32 (1..4 ) .1.3.6.1.4.1.9.9.637.1.3.1.1 |
cscRdrCategoryIDThis object indicates the unique id assigned to this RDR
category by the RDR formatter.ro Unsigned32 .1.3.6.1.4.1.9.9.637.1.3.1.2 |
cscRdrCategoryNameThis object indicates the human readable name assigned to this
RDR category by the RDR formatter. The client application
provides the RDR formatter with the value of this object.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.9.9.637.1.3.1.3 |
cscRdrCategoryNumSentReportsThis object indicates the number of RDR reports sent over this
category.
Discontinuities in the value of this counter can occur at
disabling/enabling of the RDR formatter, and at other times
as indicated by the value of cscRdrCounterDiscontinuityTime.ro Counter32 UNITS "reports" .1.3.6.1.4.1.9.9.637.1.3.1.4 |
cscRdrCategoryNumDiscardedReportsThis object indicates the number of RDR reports dropped for
this category.
Discontinuities in the value of this counter can occur at
disabling/enabling of the RDR formatter, and at other times
as indicated by the value of cscRdrCounterDiscontinuityTime.ro Counter32 UNITS "reports" .1.3.6.1.4.1.9.9.637.1.3.1.5 |
cscRdrCategoryReportRateThis object indicates the rate at which the RDR formatter is
currently sending reports over this category.ro Gauge32 UNITS "reports per second" .1.3.6.1.4.1.9.9.637.1.3.1.6 |
cscRdrCategoryNumQueuedReportsThis object indicates the number of pending RDR reports within
this category.ro Gauge32 UNITS "reports" .1.3.6.1.4.1.9.9.637.1.3.1.7 |
cscRdrCategoryDestTableThis table lists the operational data for RDR destination
servers for each RDR category for a service control entity. SEQUENCE OF CscRdrCategoryDestEntry .1.3.6.1.4.1.9.9.637.1.4 |
cscRdrCategoryDestEntryThis entry contains the operational data for a category of
RDR formatter for a destination server of the service control
entity identified by the entPhysicalIndex in the ENTITY-MIB with
the entPhysicalVendorType set to any of the following values:
'cevChassisSCE2000'
'cevChassisSCE1000'
'cevNmeApaModule'. CscRdrCategoryDestEntry .1.3.6.1.4.1.9.9.637.1.4.1 |
cscRdrCategoryDestPriorityThis object indicates the priority configured for this category
on the RDR destination server. The priority is determined by
entPhysicalIndex and the category of the destination server.ro Integer32 (1..100 ) .1.3.6.1.4.1.9.9.637.1.4.1.1 |
cscRdrCategoryDestStatusThis object indicates the status of this RDR destination for
this category.
'other' : None of the following.
'active' : The reports are sent to this destination.
'standby': This destination is a backup.
Only one RDR destination can be 'active' if the
cscRdrFormatterForwardingMode is set to either 'redundancy' or
'simpleLoadBalancing'. Multiple RDR destinations can be in
'active' state when cscRdrFormatterForwardingMode is set to
'multicast'.ro Enumeration .1.3.6.1.4.1.9.9.637.1.4.1.2 |
cscRdrNotifsConfig OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.637.1.5 |
cscRdrReportsEnableNotifsThis object controls whether the system produces notifications
defined in thi MIB. A 'false' value will prevent the
notifications from being generated by this system.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.637.1.5.1 |
cscRdrCounterDiscontinuityTimeThe value of service up time on the most recent occasion at
which any one or more of the RDR counters suffered a
discontinuity. If no such discontinuities have occurred since
the last re-initialization of the local management subsystem,
then this object contains a zero value.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.9.9.637.1.6 |
ciscoSCRdrMIBConform OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.637.2 |
cscRdrMIBCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.637.2.1 |
cscRdrMIBGroups OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.637.2.2 |