CISCO-SERVICE-CONTROL-LINK-MIB
The CISCO-SERVICE-CONTROL-LINK-MIB monitors the operational status and configuration parameters of logical service control links that bridge subscriber-side ports to network-side ports on Cisco service control entities. It provides visibility into link state transitions, port associations, and administrative settings required for subscriber traffic segmentation and service enforcement.
Imported Objects
Objects
17 total| Object Name |
|---|
ciscoServiceControlLinkMIBThis MIB module provides information about the status and
configuration of links used by service control entities.
The link on a service control entity is a contained entity that
joins subscriber side port(s) to network side port(s). MODULE-IDENTITY .1.3.6.1.4.1.9.9.631 |
ciscoSCLinkMIBNotifs OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.631.0 |
ciscoServiceControlLinkModeChangeThis notification signifies that the agent entity has detected
that the cscLinkOperMode object in this MIB has changed. NOTIFICATION-TYPE .1.3.6.1.4.1.9.9.631.0.1 |
ciscoSCLinkMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.631.1 |
cscLinkNotifsEnabledThis object controls whether the cServiceLinkModeChange
notification is generated. A 'false' value will prevent
notifications from being generated.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.631.1.1 |
cscLinkStatusTableThis table provides information regarding the configuration and
status of the links that pass through the service control
entity
and carry inband traffic. The link is an entity and has an entry
in the entPhysicalTable of the ENTITY-MIB with entPhysicalClass
of 'other' and is contained in entity 'chassis' or 'module'. A
link entity contains entities from the entPhysicalTable of
entPhysicalClass 'port'.
The number of entries in this table is determined by the number
of service control entities in the entPhysicalTable and the
number of links supported by each.
Each Link entity contains at least a subscriber side port entity
and a network side port entity. SEQUENCE OF CscLinkStatusEntry .1.3.6.1.4.1.9.9.631.1.2 |
cscLinkStatusEntryAn entry (conceptual row) in the cscLinkStatusTable created by
the agent for every link entity contained in the service control
entity after initilization.
entPhysicalIndex is index for this table which represents
entities of 'other' entPhysicalClass. CscLinkStatusEntry .1.3.6.1.4.1.9.9.631.1.2.1 |
cscLinkAdminModeOnActiveThis object indicates the desired mode of the link when the
entity that contains this link has the operating status of
active and the entity is not in boot or failure state.rw CsceLinkModeType .1.3.6.1.4.1.9.9.631.1.2.1.1 |
cscLinkAdminModeOnFailureThis object indicates the desired mode of the link when the
entity that contains this link has the operational status of
failure.rw CsceLinkModeType .1.3.6.1.4.1.9.9.631.1.2.1.2 |
cscLinkOperModeThis object reflects the operational mode of the link.ro CsceLinkModeType .1.3.6.1.4.1.9.9.631.1.2.1.3 |
cscLinkAdminReflectionEnableThis object indicates how the failure status of the physical
link on one port should be reflected to the other port(s) of the
link.
'reflectionEnabled' : Failure is reflected on the other
port of the link.
'reflectionOnAllPortsEnabled': Failure of Physical Link is reflected
on all other ports on all links.
'reflectionDisabled' : Port status is not reflected on the
link.rw Enumeration .1.3.6.1.4.1.9.9.631.1.2.1.4 |
cscLinkSubscriberSidePortIndexThis object specifies the entPhysicalIndex value that uniquely
identifies the port entity contained in this link entity in the
entPhysicalTable. This port entity is connected to the
subscriber side.ro EntPhysicalIndexOrZero (CISCO-TC) .1.3.6.1.4.1.9.9.631.1.2.1.5 |
cscLinkNetworkSidePortIndexThis object specifies the entPhysicalIndex value that uniquely
identifies the port entity contained in this link entity in the
entPhysicalTable. This port entity is connected to the
network side.ro EntPhysicalIndexOrZero (CISCO-TC) .1.3.6.1.4.1.9.9.631.1.2.1.6 |
cscLinkAdminReflectionStateThis object indicates how the link propagates the failure state
between the ports on each end of the link.
'noLinkReflection' : No failure is currently being
reflected.
'reflectingFailureToNetwork' : Link failure on subscriber side
is reflected to the network side.
'reflectingFailureToSubscriber': Link failure on network side
is reflected to the subscriber side.
'reflectingFailureToBoth' : Failure reflected to both sides of
the link.rw Enumeration .1.3.6.1.4.1.9.9.631.1.2.1.7 |
ciscoSCLinkMIBConform OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.631.2 |
ciscoSCLinkMIBCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.631.2.1 |
ciscoSCLinkMIBObjectGroups OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.631.2.2 |
More MIBs from Cisco
Browse all CiscoMIBs →The CISCO-ENTITY-VENDORTYPE-OID-MIB maps Cisco-specific hardware component identifiers to the ENTITY-MIB's entPhysicalTable, enabling precise differentiation of physical device types such as line cards, power supplies, and fans within Cisco infrastructure. This mapping ensures that SNMP management systems can accurately correlate physical inventory entries with vendor-specific component definitions for accurate device discovery and monitoring.
The CISCO-UNIFIED-COMPUTING-EQUIPMENT-MIB provides SNMP-based monitoring and management of Cisco Unified Computing System (UCS) hardware components, including chassis, blades, fabric interconnects, and power supplies. It exposes critical operational metrics such as device status, port states, temperature readings, fan speeds, and power consumption data for infrastructure health assessment.
The CISCO-UNIFIED-COMPUTING-ADAPTOR-MIB enables SNMP-based monitoring and management of physical and virtual network adapter interfaces, including link status, traffic counters, error statistics, and port configuration parameters, within the Cisco Unified Computing System (UCS) fabric interconnects and blade servers.
The CISCO-UNIFIED-COMPUTING-TC-MIB module defines standard textual conventions and data type definitions required for monitoring Cisco Unified Computing System (UCS) hardware components, including server blades, fabric interconnects, and chassis resources. These definitions enable consistent interpretation of specific UCS metrics such as power supply status, fan speeds, thermal readings, and port utilization across SNMP management applications.
The CISCO-UNIFIED-COMPUTING-FABRIC-MIB enables SNMP-based monitoring and management of the Cisco UCS Fabric Interconnects and associated fabric switching infrastructure, exposing metrics for port states, link utilization, error counters, and fabric topology status. It facilitates granular visibility into the physical and logical fabric layers, including uplink/downlink interfaces, VLAN configurations, and fabric failover conditions within the unified computing environment.
The STARENT-MIB module provides SNMP management and monitoring capabilities for Cisco ASR 5000 and ASR 5500 multimedia core platforms, specifically exposing metrics related to 2G/3G/4G and WiFi subscriber sessions, inline service states, and carrier-class high-availability status.