CISCO-QP-LBG-MIB
AI MIB Summary
The CISCO-QP-LBG-MIB enables SNMP-based management of QAM partition and load balance group configurations on Cisco headend cable access equipment. It exposes specific parameters for monitoring and controlling the distribution of QAM channels across load balance groups to optimize upstream bandwidth allocation and signal integrity.
This MIB module represents the Qam-Partition (QP) and Load Balance Group (LBG) parameters in the headend and it is supported by an snmp agent. It defines objects for managing both QP and LBG.
Main OID:
ciscoQpLbgMIB.1.3.6.1.4.1.9.9.824
64
Objects
Active
Status
7
Dependencies
Imported Objects
Objects
64 total| Object Name |
|---|
ciscoQpLbgMIBThis MIB module represents the Qam-Partition (QP) and Load
Balance Group (LBG) parameters in the headend and it is
supported by an snmp agent. It defines objects for managing
both QP and LBG. MODULE-IDENTITY .1.3.6.1.4.1.9.9.824 |
ciscoQpLbgNotifs OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.824.0 |
cqlQpStateChangeThe device generates this notification when a QP state
has changed and the value of cqlQpNotifyEnable is 'true'. NOTIFICATION-TYPE .1.3.6.1.4.1.9.9.824.0.1 |
cqlQamAddThe device generates this notification when a qam has
been added to QP and the value of cqlQamNotifyEnable
is 'true'. NOTIFICATION-TYPE .1.3.6.1.4.1.9.9.824.0.2 |
cqlQamDeleteThe device generates this notification when a qam has
been deleted from QP and the value of cqlQamNotifyEnable
is 'true'. NOTIFICATION-TYPE .1.3.6.1.4.1.9.9.824.0.3 |
cqlLbgRouteAddThe device generates this notification when a route has
been added to QP and the value of cqlRouteNotifyEnable
is 'true'. NOTIFICATION-TYPE .1.3.6.1.4.1.9.9.824.0.4 |
cqlLbgRouteDeleteThe device generates this notification when a route has been
deleted from QP and the value of cqlRouteNotifyEnable is
'true'. NOTIFICATION-TYPE .1.3.6.1.4.1.9.9.824.0.5 |
cqlQamOverSubscribedAlertThe device generates this notification when a qam
has been oversubscribed or cleared. This will be
enabled when the object cqlQamOverSubscribedEnable
is set to 'true'. NOTIFICATION-TYPE .1.3.6.1.4.1.9.9.824.0.6 |
ciscoQpLbgObjects OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.824.1 |
cqlqamPartitionTableThis table describes the various parameters of QP
such as QP's state, protocol, management IP, server IP,
server state, information related to qam and video routes. SEQUENCE OF CqlqamPartitionEntry .1.3.6.1.4.1.9.9.824.1.1 |
cqlqamPartitionEntryEach entry corresponds to the configuration of a QP. CqlqamPartitionEntry .1.3.6.1.4.1.9.9.824.1.1.1 |
cqlqpIndexTable Index. This index uniquely identifies the QP. Unsigned32 .1.3.6.1.4.1.9.9.824.1.1.1.1 |
cqlqpIdThis object specifies the QP Id.ro Unsigned32 .1.3.6.1.4.1.9.9.824.1.1.1.2 |
cqlqpMgmtIpAddrTypeThe type of the Management address as defined inetAddressType.
The supported address types are IPv4 and IPv6.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.9.9.824.1.1.1.3 |
cqlqpMgmtIpThis object specifies the Management IP address of a QP.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.9.9.824.1.1.1.4 |
cqlqpServerIpAddrTypeThe type of the Server address as defined inetAddressType. The
supported address types are IPv4 and IPv6.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.9.9.824.1.1.1.5 |
cqlqpServerIpServer IP of the QP.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.9.9.824.1.1.1.6 |
cqlqpStateThis object specifies the state of the QP. The following are
the valid states.
inactive(1)
QP is in inactive state.
init(2)
QP is in init state.
active(3)
QP is in active state.ro Enumeration .1.3.6.1.4.1.9.9.824.1.1.1.7 |
cqlqpProtocolThis object specifies the QP Protocol.
Gqi(1)
Ermi(2)ro Enumeration .1.3.6.1.4.1.9.9.824.1.1.1.8 |
cqlqpKeepAliveTimeThis object specifies the keepalive timer in
seconds for a QP.ro Unsigned32 UNITS "seconds" .1.3.6.1.4.1.9.9.824.1.1.1.9 |
cqlqpServerStateThis object specifies the Server state of the QP.
disconnected(1)
Server is in disconnected state.
connected(2)
Server is in connected state.ro Enumeration .1.3.6.1.4.1.9.9.824.1.1.1.10 |
cqlqpGqiMacAddrThis object specifies the MAC address of a QP, applicable only
for GQI Protocol.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.9.9.824.1.1.1.11 |
cqlqpGqiResetIntervalThis object specifies Reset interval for a QP. It is applicable
only for GQI protocol.ro Unsigned32 UNITS "seconds" .1.3.6.1.4.1.9.9.824.1.1.1.12 |
cqlqpNumQamsThe total number of qams associated with the QP.ro Unsigned32 .1.3.6.1.4.1.9.9.824.1.1.1.13 |
cqlqpQamCarrrierListThis object specifies the list of Qam carriers associated with
the QP.ro OCTET STRING .1.3.6.1.4.1.9.9.824.1.1.1.14 |
cqlqpNumRoutesThe total number of routes associated with the QP.ro Unsigned32 .1.3.6.1.4.1.9.9.824.1.1.1.15 |
cqlqpRouteDetailsRoute details of the QP. It includes the configured IP and also
the highest and lowest UDP range.ro OCTET STRING .1.3.6.1.4.1.9.9.824.1.1.1.16 |
cqlqpErmiErrpComponentNameComponent Name for the QP, applicable only for ERMI protocol.ro OCTET STRING .1.3.6.1.4.1.9.9.824.1.1.1.17 |
cqlqpErmiErrpStreamingZoneStreaming zone for the QP, applicable only for ERMI protocol.ro OCTET STRING .1.3.6.1.4.1.9.9.824.1.1.1.18 |
cqlqpErmiErrpHoldTimeHold Time in seconds for the QP, applicable only for ERMI
protocol.ro Unsigned32 UNITS "seconds" .1.3.6.1.4.1.9.9.824.1.1.1.19 |
cqlqpErmiErrpConnnectTimeConnect Time in seconds for the QP, applicable only for ERMI
protocol.ro Unsigned32 UNITS "seconds" .1.3.6.1.4.1.9.9.824.1.1.1.20 |
cqlqpErmiErrpConnectRetryConnection retry in seconds for the QP. It is applicable only
for ERMI protocol.ro Unsigned32 UNITS "seconds" .1.3.6.1.4.1.9.9.824.1.1.1.21 |
cqlqpErmiRtspConnectTimeConnect time in seconds for the QP. It is applicable only for
ERMI protocol.ro Unsigned32 UNITS "seconds" .1.3.6.1.4.1.9.9.824.1.1.1.22 |
cqlqpErmiRtspConnectRetryConnect retry in seconds for the QP, applicable
only for ERMI protocol.ro Unsigned32 UNITS "seconds" .1.3.6.1.4.1.9.9.824.1.1.1.23 |
cqlqpErmiRtspKeepAliveTimeConnection timeout in seconds for the QP. It is applicable only
for ERMI protocol.ro Unsigned32 UNITS "seconds" .1.3.6.1.4.1.9.9.824.1.1.1.24 |
cqlqpErmiRtspSessionTimeoutSession Timeout in seconds for the QP. It is applicable
only for ERMI protocol.ro Unsigned32 UNITS "seconds" .1.3.6.1.4.1.9.9.824.1.1.1.25 |
cqlqpQamOversubscribedStatusThis object specifies oversubscription status of a Qam.
The value 'True' indicates the Qam is oversubscribed.
Otherwise the value 'False' is reported.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.824.1.1.1.26 |
cqlqpServerIpListList of Server IP's for the QP.ro OCTET STRING .1.3.6.1.4.1.9.9.824.1.1.1.27 |
cqlloadBalanceGroupTableThis table describes the total bandwidth and the
reserved bandwidth of QAM/IP based sessions. SEQUENCE OF CqlloadBalanceGroupEntry .1.3.6.1.4.1.9.9.824.1.2 |
cqlloadBalanceGroupEntryEach entry corresponds to the parameters of a LBG. CqlloadBalanceGroupEntry .1.3.6.1.4.1.9.9.824.1.2.1 |
cqllbgIndexThis index is to identify the LBG group within the slot. Unsigned32 .1.3.6.1.4.1.9.9.824.1.2.1.1 |
cqllbgTotalBandwidthThis object specifies the total bandwidth in Kbps of a LBG.ro Unsigned32 UNITS "Kbps" .1.3.6.1.4.1.9.9.824.1.2.1.2 |
cqllbgQamRsvBandwidthThis object specifies the total reserved bandwidth in Kbps for
depi sessions.ro Unsigned32 UNITS "Kbps" .1.3.6.1.4.1.9.9.824.1.2.1.3 |
cqllbgIpRsvBandwidthThis object specifies the total reserved bandwidth
in Kbps for video sessions.ro Unsigned32 UNITS "Kbps" .1.3.6.1.4.1.9.9.824.1.2.1.4 |
cqllbgAvailableBandwidthThis object specifies the available bandwidth in Kbps. This may
be calculated as (TotalBandwidth - (QamRsvBandwidth +
IpRsvBandwith)).ro Unsigned32 UNITS "Kbps" .1.3.6.1.4.1.9.9.824.1.2.1.5 |
cqllbgrouteTableThis table describes the route parameters such as
QP id,destination ip, low and high udp range, reserved and
allocated bandwidth. SEQUENCE OF CqllbgrouteEntry .1.3.6.1.4.1.9.9.824.1.3 |
cqllbgrouteEntryEach entry corresponds to the parameters of a route. CqllbgrouteEntry .1.3.6.1.4.1.9.9.824.1.3.1 |
cqllbgRouteIndexThe table index. This is the index which uniquely identifies
the
route within the LBG group. Unsigned32 .1.3.6.1.4.1.9.9.824.1.3.1.1 |
cqllbgQpIdThis object specifies the QP ID. The range of the QP is between
1 and 50.ro Unsigned32 .1.3.6.1.4.1.9.9.824.1.3.1.2 |
cqllbgDstIpAddrTypeThe type of the destination address as defined inetAddressType.
The supported address types are IPv4 and IPv6.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.9.9.824.1.3.1.3 |
cqllbgDstIpAddrDestination IP address of the route to which the incoming
packets are routed to.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.9.9.824.1.3.1.4 |
cqllbgUdpPortRangeMinThe lowest UDP port of the UDP port range that can be used.ro Unsigned32 .1.3.6.1.4.1.9.9.824.1.3.1.5 |
cqllbgUdpPortRangeMaxThe highest UDP port of the UDP port range that can be used.ro Unsigned32 .1.3.6.1.4.1.9.9.824.1.3.1.6 |
cqllbgGqiIngressPortIngress port of a QP, applicable only for GQI protocol.ro Unsigned32 .1.3.6.1.4.1.9.9.824.1.3.1.7 |
cqllbgRsvBandwidthReserved bandwidth is the total bitrate reserved on
this route in Kbps.ro Unsigned32 UNITS "Kbps" .1.3.6.1.4.1.9.9.824.1.3.1.8 |
cqllbgAllocatedBandwidthThe total bandwidth being used by sessions using this route in
Kbps.ro Unsigned32 UNITS "Kbps" .1.3.6.1.4.1.9.9.824.1.3.1.9 |
cqllbgNumFlowsNumber of sessions currently use this route to forward this
traffic in Kbps.ro Unsigned32 .1.3.6.1.4.1.9.9.824.1.3.1.10 |
cqlQpNotifyEnableThis object specifies whether the system generates
cqlQpStateChange notifications. A false value will prevent
cqlQpStateChange notifications from being generated by this
system.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.824.1.4 |
cqlQamNotifyEnableThis object specifies whether the system generates cqlQamAdd or
cqlQamDelete notifications. A false value will prevent cqlQamAdd
or cqlQamDelete notifications from being generated by this
system.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.824.1.5 |
cqlRouteNotifyEnableThis object specifies whether the system produces cqlRouteAdd
or cqlRouteDelete notifications. A false value will prevent
cqlRouteAdd or cqlRouteDelete notifications from being
generated by this system.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.824.1.6 |
cqlQamOverSubscribedEnableThis object specifies whether the system produces
cqlQamOverSubscribedAlert notifications. A false value will
prevent cqlQamOverSubscribedAlert notifications from being
generated by the system.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.824.1.7 |
ciscoQpLbgConform OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.824.2 |
ciscoQpLbgCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.824.2.1 |
ciscoQpLbgGroups OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.824.2.2 |