CISCO-POP-MGMT-MIB
AI MIB Summary
The CISCO-POP-MGMT-MIB enables management of Cisco Point of Presence devices by monitoring DSX1 and DSX0 facility status and aggregating call summary statistics.
Cisco Point Of Presence Management MIB to provide DSX1 and DSX0 facilities management and call summaries.
Main OID:
ciscoPopMgmtMIB.1.3.6.1.4.1.9.10.19
121
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
121 total| Object Name |
|---|
ciscoPopMgmtMIBCisco Point Of Presence Management MIB to provide DSX1
and DSX0 facilities management and call summaries. MODULE-IDENTITY .1.3.6.1.4.1.9.10.19 |
ciscoPopMgmtMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.9.10.19.1 |
cpmDS0Usage OBJECT IDENTIFIER .1.3.6.1.4.1.9.10.19.1.1 |
cpmDS0UsageTableThe DS0 usage table is for hardware and software
objects not used as interfaces, and not covered in
rfc1213. These objects include analog calls coming
over ISDN, Channelized T1, and Channelized E1. This
table is created for every DS1 line in the device. SEQUENCE OF CpmDS0UsageEntry .1.3.6.1.4.1.9.10.19.1.1.1 |
cpmDS0UsageEntryAn entry in the DS0 Usage table. CpmDS0UsageEntry .1.3.6.1.4.1.9.10.19.1.1.1.1 |
cpmDS1SlotIndexThe slot index indicates the slot number on the
device where the DS1 card resides. Integer32 .1.3.6.1.4.1.9.10.19.1.1.1.1.1 |
cpmDS1PortIndexThe port index indicates the port number of a
specific DS1 on the DS1 card in the slot Integer32 .1.3.6.1.4.1.9.10.19.1.1.1.1.2 |
cpmChannelIndexThe channel index that distinguishes the DS0 timeslot
of the DS1 port. The range of the channel index is based
on the number of T1/E1 channels: 1-24(T1) and 1-31(E1). Integer32 .1.3.6.1.4.1.9.10.19.1.1.1.1.3 |
cpmConfiguredTypeThe configured technology for the channel: ISDN(2),
Channelized T1 (3) or Channelized E1 (4).ro Enumeration .1.3.6.1.4.1.9.10.19.1.1.1.1.4 |
cpmDS0CallTypeThe type of the current call carried by this DS0.
idle - This DS0 is currently idle.
unknown - The data type of the call currently
occupying this DS0 is not one of the
types listed here.
analog - The data type of the call currently
occupying this DS0 is analog, i.e. a
modem call.
digital - The data type of the call currently
occupying this DS0 is digital.
v110 - The call currently occupying this
DS0 is a V110 call.
v120 - The call currently occupying this
DS0 is a V120 call.
voice - The call currently occupying this
DS0 is a voice call.ro Enumeration .1.3.6.1.4.1.9.10.19.1.1.1.1.5 |
cpmL2EncapsulationThe data link encapsulation of the call currently
occuppying this DS0:
idle - This DS0 is currently idle.
unknown - The encapsulation of the currently
active call on this DS0 is not one
of the options following.
PPP -
slip -
arap -
hdlc -
exec -
voice - voice encapsulation; IANA type voiceEncap(103)ro Enumeration .1.3.6.1.4.1.9.10.19.1.1.1.1.6 |
cpmCallCountThe number of calls that have occupied this DS0.ro Counter32 .1.3.6.1.4.1.9.10.19.1.1.1.1.7 |
cpmTimeInUseThe amount of time that this DS0 has been in use.
This is computed by summing up the call durations
of all past calls that have occupied this DS0.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.9.10.19.1.1.1.1.8 |
cpmInOctetsThe total number of octets received on this DS0 for
data calls (cpmDS0CallType has the value 'analog(3)'
or 'digital(4)' or 'v110(5)' or 'v120(6)'). All the
received 'raw' octets are counted, including any
protocol headers which may or may not be present,
depending on the service type of data call.ro Counter32 .1.3.6.1.4.1.9.10.19.1.1.1.1.9 |
cpmOutOctetsThe total number of octets transmitted on this DS0 for
data calls (cpmDS0CallType has the value 'analog(3)'
or 'digital(4)' or 'v110(5)' or 'v120(6)'). All the
transmitted 'raw' octets are counted, including any
protocol headers which may or may not be present,
depending on the service type of data call.ro Counter32 .1.3.6.1.4.1.9.10.19.1.1.1.1.10 |
cpmInPacketsThe total number of packets received on this DS0 for
data calls (cpmDS0CallTyp has the value 'analog(3)'
or 'digital(4)' or 'v110(5)' or 'v120(6)').ro Counter32 .1.3.6.1.4.1.9.10.19.1.1.1.1.11 |
cpmOutPacketsThe total number of packets transmitted on this DS0 for
data calls (cpmDS0CallTyp has the value 'analog(3)'
or 'digital(4)' or 'v110(5)' or 'v120(6)').ro Counter32 .1.3.6.1.4.1.9.10.19.1.1.1.1.12 |
cpmAssociatedInterfaceThis is the value of ifIndex when the specific channel
has an active call with a corresponding interface in the
ifTable. For example, a digital ISDN call has a value
pointing to the B-Channel entry in the ifTable. A
modem call over ISDN or CT1/CE1 has a value pointing
to the async interface of the modem assigned to this
call. If the channel is idle, this value is 0.ro InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.9.10.19.1.1.1.1.13 |
cpmISDNCfgBChanInUseForAnalogThe number of configured ISDN B-Channels that are
currently occupied by analog calls.ro Gauge32 .1.3.6.1.4.1.9.10.19.1.1.2 |
cpmISDNCfgBChannelsInUseThe number of configured ISDN B-Channels that are
currently occupied by both Digital and Analog calls.ro Gauge32 .1.3.6.1.4.1.9.10.19.1.1.3 |
cpmActiveDS0sThe number of DS0s that are currently in use.ro Gauge32 .1.3.6.1.4.1.9.10.19.1.1.4 |
cpmPPPCallsThe current number of active PPP calls received
by the managed devicero Gauge32 .1.3.6.1.4.1.9.10.19.1.1.5 |
cpmV120CallsThe current number of active V.120 calls received
by the managed devicero Gauge32 .1.3.6.1.4.1.9.10.19.1.1.6 |
cpmV110CallsThe current number of active V.110 calls received
by the managed devicero Gauge32 .1.3.6.1.4.1.9.10.19.1.1.7 |
cpmActiveDS0sHighWaterMarkThe high water mark for number of DS0s that are active
simultaneouslyro Counter32 .1.3.6.1.4.1.9.10.19.1.1.8 |
cpmDS1DS0UsageTableThe DS1-DS0-usage table is for hardware and software
objects not used as interfaces, and not covered in
rfc1213. These objects provide information on timeslots
usage for a particular DS1. SEQUENCE OF CpmDS1DS0UsageEntry .1.3.6.1.4.1.9.10.19.1.1.9 |
cpmDS1DS0UsageEntryAn entry in the DS0 Usage table. CpmDS1DS0UsageEntry .1.3.6.1.4.1.9.10.19.1.1.9.1 |
cpmDS1UsageSlotIndexThe slot index indicates the slot number on the
device where the DS1 card resides. The slot index of
the first slot is starting from 0 and increment by 1 for
the next slot in the device. Integer32 .1.3.6.1.4.1.9.10.19.1.1.9.1.1 |
cpmDS1UsagePortIndexThe port index indicates the port number of a
specific DS1 on the DS1 card in the slot. The port index
of the first port is starting from 0 and increment by 1
for the next port on the DS1 card. Integer32 .1.3.6.1.4.1.9.10.19.1.1.9.1.2 |
cpmDS1ActiveDS0sThe number of DS0s that are currently in use for a
particular DS1.ro Gauge32 .1.3.6.1.4.1.9.10.19.1.1.9.1.3 |
cpmDS1ActiveDS0sHighWaterMarkThe highest number of simultaneously actived DS0s on a
specified DS1.ro Counter32 .1.3.6.1.4.1.9.10.19.1.1.9.1.4 |
cpmDS1TotalAnalogCallsThe accumulated number of analog data calls
(cpmDS0CallType has the value 'analog(3)') on all
ds0s within this DS1 since system startup.
The object includes active and terminated calls.ro Counter32 UNITS "calls" .1.3.6.1.4.1.9.10.19.1.1.9.1.5 |
cpmDS1TotalDigitalCallsThe accumulated number of digital data calls
(cpmDS0CallType has the value 'digital(4)') on all
ds0s within this DS1 since system startup.
The object includes active and terminated calls.ro Counter32 UNITS "calls" .1.3.6.1.4.1.9.10.19.1.1.9.1.6 |
cpmDS1TotalV110CallsThe accumulated number of v.110 data calls
(cpmDS0CallType has the value 'v110(5)') on all
ds0s within this DS1 since system startup.
The object includes active and terminated calls.ro Counter32 UNITS "calls" .1.3.6.1.4.1.9.10.19.1.1.9.1.7 |
cpmDS1TotalV120CallsThe accumulated number of v.120 data calls
(cpmDS0CallType has the value 'v120(6)') on all
ds0s within this DS1 since system startup.
The object includes active and terminated calls.ro Counter32 UNITS "calls" .1.3.6.1.4.1.9.10.19.1.1.9.1.8 |
cpmDS1TotalCallsThe total number of calls on all the DS0s within
this DS1 since last system re-initialization. The
object includes active and terminated calls.
This only includes DS0s configured as bearer channels,
not those configured for signaling, such as PRI D-channel.ro Counter32 UNITS "calls" .1.3.6.1.4.1.9.10.19.1.1.9.1.9 |
cpmDS1TotalTimeInUseThe total call duration on all the DS0s within
this DS1 since last system re-initialization.
This only includes DS0s configured as bearer channels,
not those configured for signaling, such as PRI D-channel.ro Unsigned32 UNITS "seconds" .1.3.6.1.4.1.9.10.19.1.1.9.1.10 |
cpmDS1CurrentIdleThe total number of DS0s currently in idle state within
this DS1.
This only includes DS0s configured as bearer and CAS channels,
not those configured for signaling, such as PRI D-channel.
See cpmDS0OperStatus in the cpmDS0StatusTable for individual
DS0s.ro Gauge32 .1.3.6.1.4.1.9.10.19.1.1.9.1.11 |
cpmDS1CurrentOutOfServiceThe total number of DS0s in this DS1 currently placed
out of service.
This only includes DS0s configured as bearer and CAS channels,
not those configured for signaling, such as PRI D-channel.
See cpmDS0OperStatus in the cpmDS0StatusTable for individual
DS0s.ro Gauge32 .1.3.6.1.4.1.9.10.19.1.1.9.1.12 |
cpmDS1CurrentBusyoutThe total number of DS0s in this DS1 which currently have
been requested to be busied out, but are not yet out of
service.
When an active call on a busied out DS0 terminates,
the DS0 will be out of service, this object will be
decremented and cpmDS1TotalOutOfService will be
incremented.
This only includes DS0s configured as bearer channels,
not those configured for signaling, such as PRI D-channel.
See cpmDS0AdminStatus in the cpmDS0StatusTable for individual
DS0s.ro Gauge32 .1.3.6.1.4.1.9.10.19.1.1.9.1.13 |
cpmDS1InOctetsThe total number of octets received over all the
DS0 bearer channels within this DS1 since last system
re-initialization.
This value is a sum of all the cpmInOctets objects in
the cpmDS0UsageTable for this DS1.ro Counter32 UNITS "octets" .1.3.6.1.4.1.9.10.19.1.1.9.1.14 |
cpmDS1OutOctetsThe total number of octets transmitted over all the
DS0 bearer channels within this DS1 since last system
re-initialization.
This value is a sum of all the cpmOutOctets objects in
the cpmDS0UsageTable for this DS1.ro Counter32 UNITS "octets" .1.3.6.1.4.1.9.10.19.1.1.9.1.15 |
cpmDS1InPacketsThe total number of data packets received over all the
DS0 bearer channels within this DS1 since last system
re-initialization.
This value is a sum of all the cpmInPackets objects in
the cpmDS0UsageTable for this DS1. It consists of PPP
or PCM voice data packets.ro Counter32 UNITS "packets" .1.3.6.1.4.1.9.10.19.1.1.9.1.16 |
cpmDS1OutPacketsThe total number of data packets transmitted over all the
DS0 bearer channels within this DS1 since last system
re-initialization.
This value is a sum of all the cpmOutPackets objects in
the cpmDS0UsageTable for this DS1. It consists of PPP
or PCM voice data packets.ro Counter32 UNITS "packets" .1.3.6.1.4.1.9.10.19.1.1.9.1.17 |
cpmSW56CfgBChannelsInUseThe number of configured SW56 B-Channels that are
currently occupied by Digital calls.ro Gauge32 .1.3.6.1.4.1.9.10.19.1.1.10 |
cpmISDNCfgBChanInUseForVoiceThe number of configured ISDN B-Channels that are
currently occupied by Voice calls.ro Gauge32 .1.3.6.1.4.1.9.10.19.1.1.11 |
cpmCASCfgBChanInUseForVoiceThe number of configured CAS Channels that are
currently occupied by Voice calls.ro Gauge32 .1.3.6.1.4.1.9.10.19.1.1.12 |
cpmISDNCfgActiveDChannelsThe number of ISDN signaling channels which are active.ro Gauge32 .1.3.6.1.4.1.9.10.19.1.1.13 |
cpmISDNCfgBChannelsTimeInUseThe total call duration on all the ISDN B-channels
since last system re-initialization.ro Counter32 UNITS "seconds" .1.3.6.1.4.1.9.10.19.1.1.14 |
cpmISDNCfgBChannelsTimeInUseAnlgThe total analog call duration on all the ISDN B-channels
since last system re-initialization.
Analog call type is identified in cpmDS0CallType.ro Counter32 UNITS "seconds" .1.3.6.1.4.1.9.10.19.1.1.15 |
cpmISDNCfgBChannelCallsThe total number of calls on all the ISDN B-channels
since last system re-initialization.ro Counter32 UNITS "calls" .1.3.6.1.4.1.9.10.19.1.1.16 |
cpmISDNCfgBChannelAnalogCallsThe total number of analog calls on all the ISDN B-channels
since last system re-initialization.
Analog call type is identified in cpmDS0CallType.ro Counter32 UNITS "calls" .1.3.6.1.4.1.9.10.19.1.1.17 |
cpmTotalISDNSyncPPPCallsThe total number of ISDN-sync PPP calls received
by the managed device since last system re-initialization.ro Counter32 .1.3.6.1.4.1.9.10.19.1.1.18 |
cpmCallFailure OBJECT IDENTIFIER .1.3.6.1.4.1.9.10.19.1.2 |
cpmISDNCallsRejectedThe number of rejected ISDN calls in this managed
device.ro Counter32 .1.3.6.1.4.1.9.10.19.1.2.1 |
cpmModemCallsRejectedThe number of rejected modem calls in this managed
device.ro Counter32 .1.3.6.1.4.1.9.10.19.1.2.2 |
cpmISDNCallsClearedAbnormallyThe number of connected ISDN calls that have been
abnormally cleared, that is, they were cleared by some
event other than the following:
a - The transmission of a normal disconnect message by the
local end.
b - The reception of a normal disconnect message from the
remote end.ro Counter32 .1.3.6.1.4.1.9.10.19.1.2.3 |
cpmModemCallsClearedAbnormallyThe number of connected modem calls that have been abnormally
cleared, that is, they were not cleared with the proper modem
protocol handshakes.ro Counter32 .1.3.6.1.4.1.9.10.19.1.2.4 |
cpmISDNNoResourceThe number of ISDN calls that have been rejected because
there is no B-Channel available to handle the call.ro Counter32 .1.3.6.1.4.1.9.10.19.1.2.5 |
cpmModemNoResourceThe number of modem calls that have been rejected because
there is no modem available to handle the call.ro Counter32 .1.3.6.1.4.1.9.10.19.1.2.6 |
cpmActiveCallSummary OBJECT IDENTIFIER .1.3.6.1.4.1.9.10.19.1.3 |
cpmActiveCallSummaryTableThe active call summary table is needed to track
currently active calls. This table is needed
because modem calls are not in CALL-HISTORY-MIB,
and the DIAL-CONTROL_MIB is not yet available. SEQUENCE OF CpmActiveCallSummaryEntry .1.3.6.1.4.1.9.10.19.1.3.1 |
cpmActiveCallSummaryEntryAn entry in the Call Summary table. CpmActiveCallSummaryEntry .1.3.6.1.4.1.9.10.19.1.3.1.1 |
cpmActiveCallStartTimeIndexThe start time of the current call. TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.9.10.19.1.3.1.1.1 |
cpmActiveCallSummaryIndexArbitrary small integer to distinguish calls that occured
at the same time tick. Integer32 .1.3.6.1.4.1.9.10.19.1.3.1.1.2 |
cpmActiveUserIDThe User login ID or zero length string if unavailable.ro DisplayString .1.3.6.1.4.1.9.10.19.1.3.1.1.3 |
cpmActiveUserIpAddrThe IP address of the call or 0.0.0.0 if unavailable.
This object comes directly from IOS.ro IpAddress .1.3.6.1.4.1.9.10.19.1.3.1.1.4 |
cpmActiveCallTypeThe call type:
unknown - None of the following
analog - Modem call
digital - Digital call
v110 - V110 Call
v120 - V120 Call
voice - Voice Callro Enumeration .1.3.6.1.4.1.9.10.19.1.3.1.1.5 |
cpmActiveModemSlotIdentification of modem resource allocated to call.
This is the value of cmSlotIndex from CISCO-MODEM-MGMT-MIB.
This value along with cpmActiveModemPort uniquely identifies
a modem. Value is -1 if call does not utilize a modem.ro Integer32 .1.3.6.1.4.1.9.10.19.1.3.1.1.6 |
cpmActiveModemPortIdentification of modem resource allocated to call.
This is the value of cmPortIndex from CISCO-MODEM-MGMT-MIB.
This value along with cpmActiveModemSlot uniquely identifies
a modem. Value is -1 if call does not utilize a modem.ro Integer32 .1.3.6.1.4.1.9.10.19.1.3.1.1.7 |
cpmActiveCallDurationThe duration of the current call.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.9.10.19.1.3.1.1.8 |
cpmActiveEntrySlotThe logical slot in which the DS1 line that the user
connected on resides.ro Integer32 .1.3.6.1.4.1.9.10.19.1.3.1.1.9 |
cpmActiveEntryPortThe logical port for the DS1 line that the user connected on.ro Integer32 .1.3.6.1.4.1.9.10.19.1.3.1.1.10 |
cpmActiveEntryChannelThe channel within the DS1 that is allocated to the call.ro Integer32 .1.3.6.1.4.1.9.10.19.1.3.1.1.11 |
cpmActiveRemotePhoneNumberThe remote telephone number. For a call into the device,
this is the originating number. For a call out of the
device, this is the dialed number. If not available the
string length is zero.ro DisplayString .1.3.6.1.4.1.9.10.19.1.3.1.1.12 |
cpmActiveLocalPhoneNumberThe local telephone number. For a call into the device,
this is the dialed number. For a call out of the
device, this is the originating number. If not available
the string length is zero.ro DisplayString .1.3.6.1.4.1.9.10.19.1.3.1.1.13 |
cpmActiveTTYNumberThe TTY number associated with this call. This
information comes from the IOS 'show line' command.ro Integer32 .1.3.6.1.4.1.9.10.19.1.3.1.1.14 |
cpmCallHistorySummary OBJECT IDENTIFIER .1.3.6.1.4.1.9.10.19.1.4 |
cpmCallHistorySummaryTableMaxLengthThe upper limit on the number of entries that the
cpmCallHistoryTable may contain. A value of 0
will prevent any history from being retained. When
this table is full, the oldest entry will be deleted
and the new one will be created.rw Integer32 .1.3.6.1.4.1.9.10.19.1.4.1 |
cpmCallHistorySummaryRetainTimerThe minimum amount of time that an cpmCallHistoryEntry
will be maintained before being deleted. A value of
0 will prevent any history from being retained, but
will not prevent callCompletion traps being genarated.rw Integer32 .1.3.6.1.4.1.9.10.19.1.4.2 |
cpmCallHistorySummaryTableThe call history summary table is needed to track
ended active calls. This table is needed
because modem calls are not in CALL-HISTORY-MIB;
the CISCO-ISDN-MIB objects do not contain information
about the active calls; and the DIAL-CONTROL_MIB
is not yet available. SEQUENCE OF CpmCallHistorySummaryEntry .1.3.6.1.4.1.9.10.19.1.4.3 |
cpmCallHistorySummaryEntryAn entry in the Call Summary table. CpmCallHistorySummaryEntry .1.3.6.1.4.1.9.10.19.1.4.3.1 |
cpmCallDisconnectTimeIndexThe disconnect time of the call. TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.9.10.19.1.4.3.1.1 |
cpmCallStartTimeIndexThe start time of the current call. TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.9.10.19.1.4.3.1.2 |
cpmCallHistorySummaryIndexArbitrary small integer to distinguish calls that occured
at the same time tick. Integer32 .1.3.6.1.4.1.9.10.19.1.4.3.1.3 |
cpmUserIDThe User login ID or zero length string if unavailable.
This object comes directly from IOS.ro DisplayString .1.3.6.1.4.1.9.10.19.1.4.3.1.4 |
cpmUserIpAddrThe IP address of the call or 0.0.0.0 if unavailable.
This object comes directly from IOS.ro IpAddress .1.3.6.1.4.1.9.10.19.1.4.3.1.5 |
cpmCallTypeThe call type:
unknown - None of the following
analog - Modem call
digital - Digital call
v110 - V110 Call
v120 - V120 Call
voice - Voice Callro Enumeration .1.3.6.1.4.1.9.10.19.1.4.3.1.6 |
cpmModemSlotIdentification of modem resource allocated to call.
This is the value of cmSlotIndex from CISCO-MODEM-MGMT-MIB.
This value along with cpmModemPort uniquely identifies a modem.
Value is -1 if call does not utilize a modem.ro Integer32 .1.3.6.1.4.1.9.10.19.1.4.3.1.7 |
cpmModemPortIdentification of modem resource allocated to call.
This is the value of cmPortIndex from CISCO-MODEM-MGMT-MIB.
This value along with cpmModemSlot uniquely identifies a modem.
Value is -1 if call does not utilize a modem.ro Integer32 .1.3.6.1.4.1.9.10.19.1.4.3.1.8 |
cpmCallDurationThe duration of the current call.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.9.10.19.1.4.3.1.9 |
cpmEntrySlotThe physical system slot in which the DS1 line that the user
connected on resides.ro Integer32 .1.3.6.1.4.1.9.10.19.1.4.3.1.10 |
cpmEntryPortThe logical port for the DS1 line that the user connected on.ro Integer32 .1.3.6.1.4.1.9.10.19.1.4.3.1.11 |
cpmEntryChannelThe channel within the DS1 that is allocated to the call.ro Integer32 .1.3.6.1.4.1.9.10.19.1.4.3.1.12 |
cpmRemotePhoneNumberThe remote telephone number. For a call into the device,
this is the originating number. For a call out of the
device, this is the dialed number. If not available
the string length is zero.ro DisplayString .1.3.6.1.4.1.9.10.19.1.4.3.1.13 |
cpmLocalPhoneNumberThe local telephone number. For a call into the device,
this is the dialed number. For a call out of the
device, this is the originating number. If not available
the string length is zero.ro DisplayString .1.3.6.1.4.1.9.10.19.1.4.3.1.14 |
cpmTTYNumberThe TTY number associated with this call. This
information comes from the IOS 'show line' command.ro Integer32 .1.3.6.1.4.1.9.10.19.1.4.3.1.15 |
cpmDS0Status OBJECT IDENTIFIER .1.3.6.1.4.1.9.10.19.1.5 |
cpmDS0BusyoutNotifyEnableThis variable controls generation of
cpmDS0BusyoutNotification.
When this variable is 'true(1)', generation of
cpmDS0BusyoutNotification is enabled. When this
variable is 'false(2)', generation of
cpmDS0BusyoutNotification is disabled.
The default value is 'false(2)'.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.10.19.1.5.1 |
cpmDS0StatusTableThe DS0 Status Table provides additional DS0 level
information and configuration.
This table is an extension of the cpmDS0UsageTable. SEQUENCE OF CpmDS0StatusEntry .1.3.6.1.4.1.9.10.19.1.5.2 |
cpmDS0StatusEntryStatus for an individual DS0.
This entry AUGMENTS the cpmDS0UsageEntry.
An entry exists for each configured DS0 in the system. CpmDS0StatusEntry .1.3.6.1.4.1.9.10.19.1.5.2.1 |
cpmDS0OperStatusThe operational state of the DSO.
This object provides more detailed information than
the IF-MIB ifOperStatus.
unknown - The DSO is in an unknown state
down - The DS0 is out of service
idle - This DS0 is currently idle
setup - A new connection is in the process
of being established
connected - A active connection exists
test - The DSO is undergoing internal testingro Enumeration .1.3.6.1.4.1.9.10.19.1.5.2.1.1 |
cpmDS0BusyoutAdminStatusThe administratively requested busyout state of the DSO.
This object represents the desired busyout state of the DS0,
which may or may not be reflected in the operation state,
cpmDS0OperStatus.
This object may be set via SNMP or the system console.
noBusyout - No administrative busyout has been requested
busyout - The DS0 will be shutdown when it next
transitions to idle(2) cpmDS0OperStatus
busyoutImmediate -
Immediately transition the DS0 to down(2),
terminating any current activity
The effect of setting this object to busyout or
busyoutImmediate is constrained by the value of
cpmDS0BusyoutAllowed. If cpmDS0BusyoutAllowed has a value
of false, attempting to set this object to busyout or
busyoutImmediate will fail.
This object provides more busyout information not available
from the IF-MIB ifAdminStatus.
This object reflects busyout requests configured on the
local system as defined for the object cpmDS0BusyoutSource.rw Enumeration .1.3.6.1.4.1.9.10.19.1.5.2.1.2 |
cpmDS0BusyoutAllowThe object indicates if busyout requests for this DSO
will be allowed.
true - Setting cpmDS0BusyoutAdminStatus to busyout(2)
or busyoutImmediate(3) will be accepted
false - Busyout requests for this DS0 are not
allowed
The default value is true(1).
If cpmDS0BusyoutAllowed has a value of false(2), attempting
to set cpmDS0BusyoutAdminStatus to busyout or
busyoutImmediate will fail.
This object only constrains setting the value of
cpmDS0BusyoutAdminStatus when cpmDS0BusyoutAdminStatus is set
via SNMP.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.10.19.1.5.2.1.3 |
cpmDS0BusyoutStatusThe busyout status of the DSO.
noBusyout - The DS0 is not busied out nor has a
busyout pending.
busyoutPending - The DS0 has a busyout request pending. It
will shutdown when it next transitions
to idle(2) cpmDS0OperStatus.
busiedOut - The DS0 is out of service due to a busyout
request.
This object is needed to reflect busyouts initiated other than
administrativly, as described in cpmDS0BusyoutSource.ro Enumeration .1.3.6.1.4.1.9.10.19.1.5.2.1.4 |
cpmDS0BusyoutSourceThe source of the busyout request either pending or
active for the DSO.
none - The DS0 is not busied out nor has a busyout
request pending
local - The DS0 is busied out or has a pending request
due to an adminstrative command issued locally.
internal - The DS0 is busied out or has a pending request
due to internal system processing.
remote - The DS0 is busied out or has a pending request
due to a request from the peer switch.ro Enumeration .1.3.6.1.4.1.9.10.19.1.5.2.1.5 |
cpmDS0BusyoutTimeValue of sysUpTime when the most recent busyout request
was issued for this DS0. The value is zero indicates no
busyout request has been issued.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.9.10.19.1.5.2.1.6 |
cpmDS0ConfigFunctionThe object indicates the function this DSO is configured
to provide.
This object provides more detail than cpmConfiguredType.
unknown - Unknown configuration
t1SignallingChan - DS0 is configured as a T1 common channel
signalling (CCS) such as ISDN PRI
D-channel
t1CcsBearerChan - DS0 is configured as a T1 common channel
signalling (CCS) bearer channel
e1SignallingChan - DS0 is configured as a E1 common channel
signalling (CCS) such as ISDN PRI
D-channel
e1CcsBearerChan - DS0 is configured as a E1 common channel
signalling (CCS) bearer channel
t1CasChan - DS0 is configured as a T1 channel
associated signalling channel
e1CasChan - DS0 is configured as a E1 channel
associated signalling channelro Enumeration .1.3.6.1.4.1.9.10.19.1.5.2.1.7 |
cpmDS0InterfaceIndexThis is the value of ifIndex in the ifTable for this DS0.ro InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.9.10.19.1.5.2.1.8 |
cpmDS1LoopbackNotifyConfig OBJECT IDENTIFIER .1.3.6.1.4.1.9.10.19.1.6 |
cpmDS1LoopbackNotifyEnableThis variable controls the generation of
cpmDS1LoopbackNotification
When this variable is 'true(1)', generation of
these notification is enabled. When this
variable is 'false(2)', generation is disabled
The default value is 'false(2)'.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.10.19.1.6.1 |
cpmCallVolume OBJECT IDENTIFIER .1.3.6.1.4.1.9.10.19.1.7 |
cpmCallVolSuccISDNDigitalThe number of incoming and outgoing successful ISDN
digital data calls (cpmDS0CallType has the value
'digital(4)'), since system startup. A successful call is
a terminated call that has a disconnect cause of 'normal
call clearing(16)'.ro Counter32 .1.3.6.1.4.1.9.10.19.1.7.1 |
cpmCallVolAnalogCallClearedNormallyThe number of incoming and outgoing successful
analog data calls which use modem resource (cpmDS0CallType
has the value 'analog(3)'), since system startup. A
successful call is a terminated call who is cleared by the
proper modem protocol handshake.ro Counter32 .1.3.6.1.4.1.9.10.19.1.7.2 |
cPopMgmtMIBNotificationPrefix OBJECT IDENTIFIER .1.3.6.1.4.1.9.10.19.2 |
cpmNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.9.10.19.2.0 |
cpmDS0BusyoutNotificationThis notification is sent when there is a state change
in cpmDS0BusyoutStatus object. NOTIFICATION-TYPE .1.3.6.1.4.1.9.10.19.2.0.1 |
cpmDS1LoopbackNotificationThis notification is sent when there is a state change
in dsx1LineStatus object of RFC1406-MIB. NOTIFICATION-TYPE .1.3.6.1.4.1.9.10.19.2.0.2 |
cpmMIBConformance OBJECT IDENTIFIER .1.3.6.1.4.1.9.10.19.3 |
cpmMIBCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.9.10.19.3.1 |
cpmMIBGroups OBJECT IDENTIFIER .1.3.6.1.4.1.9.10.19.3.2 |