CISCO-MPLS-LSR-EXT-STD-MIB
The CISCO-MPLS-LSR-EXT-STD-MIB extends standard MPLS Label Switching Router (LSR) monitoring capabilities for Cisco transport network devices by defining generic objects for LSR-specific attributes not covered in base IETF standards. It enables the collection of critical operational metrics such as label distribution protocol states, forwarding table entries, and LSR interface statistics to facilitate granular troubleshooting and performance analysis of MPLS data planes.
Imported Objects
Objects
10 total| Object Name |
|---|
cmplsLsrExtStdMIBCopyright (c) 2012 IETF Trust and the persons identified
as the document authors. All rights reserved.
This MIB module contains generic object definitions for
MPLS LSR in transport networks. MODULE-IDENTITY .1.3.6.1.4.1.9.10.145 |
cmplsLsrExtNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.9.10.145.0 |
cmplsLsrExtObjects OBJECT IDENTIFIER .1.3.6.1.4.1.9.10.145.1 |
cmplsXCExtTableThis table sparse augments the mplsXCTable of
MPLS-LSR-STD-MIB [RFC3813] to provide MPLS-TP specific
information about associated tunnel information SEQUENCE OF CmplsXCExtEntry .1.3.6.1.4.1.9.10.145.1.1 |
cmplsXCExtEntryAn entry in this table extends the cross connect
information represented by an entry in
the mplsXCTable in MPLS-LSR-STD-MIB [RFC3813] through
a sparse augmentation. An entry can be created by
a network administrator via SNMP SET commands, or in
response to signaling protocol events. CmplsXCExtEntry .1.3.6.1.4.1.9.10.145.1.1.1 |
cmplsXCExtTunnelPointerThis object indicates the back pointer to the tunnel
entry segment. This object cannot be modified if
mplsXCRowStatus for the corresponding entry in the
mplsXCTable is active(1).rw RowPointer (SNMPv2-TC) .1.3.6.1.4.1.9.10.145.1.1.1.1 |
cmplsXCOppositeDirXCPtrThis object indicates the pointer to the opposite
direction XC entry. This object cannot be modified if
mplsXCRowStatus for the corresponding entry in the
mplsXCTable is active(1).rw RowPointer (SNMPv2-TC) .1.3.6.1.4.1.9.10.145.1.1.1.2 |
cmplsLsrExtConformance OBJECT IDENTIFIER .1.3.6.1.4.1.9.10.145.2 |
cmplsLsrExtGroups OBJECT IDENTIFIER .1.3.6.1.4.1.9.10.145.2.1 |
cmplsLsrExtCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.9.10.145.2.2 |
More MIBs from Cisco
Browse all CiscoMIBs →The CISCO-ENTITY-VENDORTYPE-OID-MIB maps Cisco-specific hardware component identifiers to the ENTITY-MIB's entPhysicalTable, enabling precise differentiation of physical device types such as line cards, power supplies, and fans within Cisco infrastructure. This mapping ensures that SNMP management systems can accurately correlate physical inventory entries with vendor-specific component definitions for accurate device discovery and monitoring.
The CISCO-UNIFIED-COMPUTING-EQUIPMENT-MIB provides SNMP-based monitoring and management of Cisco Unified Computing System (UCS) hardware components, including chassis, blades, fabric interconnects, and power supplies. It exposes critical operational metrics such as device status, port states, temperature readings, fan speeds, and power consumption data for infrastructure health assessment.
The CISCO-UNIFIED-COMPUTING-ADAPTOR-MIB enables SNMP-based monitoring and management of physical and virtual network adapter interfaces, including link status, traffic counters, error statistics, and port configuration parameters, within the Cisco Unified Computing System (UCS) fabric interconnects and blade servers.
The CISCO-UNIFIED-COMPUTING-TC-MIB module defines standard textual conventions and data type definitions required for monitoring Cisco Unified Computing System (UCS) hardware components, including server blades, fabric interconnects, and chassis resources. These definitions enable consistent interpretation of specific UCS metrics such as power supply status, fan speeds, thermal readings, and port utilization across SNMP management applications.
The CISCO-UNIFIED-COMPUTING-FABRIC-MIB enables SNMP-based monitoring and management of the Cisco UCS Fabric Interconnects and associated fabric switching infrastructure, exposing metrics for port states, link utilization, error counters, and fabric topology status. It facilitates granular visibility into the physical and logical fabric layers, including uplink/downlink interfaces, VLAN configurations, and fabric failover conditions within the unified computing environment.
The STARENT-MIB module provides SNMP management and monitoring capabilities for Cisco ASR 5000 and ASR 5500 multimedia core platforms, specifically exposing metrics related to 2G/3G/4G and WiFi subscriber sessions, inline service states, and carrier-class high-availability status.